Nordmende HE62BL, HE62IX User Manual

OPERATING AND INSTALLATION

HE62BL HE62IX

INSTRUCTIONS OF

BUILT-IN ELECTRIC HOB

CONTENTS

1. DESCRIPTION OF THE HOB

2. SAFETY INSTRUCTIONS

3. INSTALLATION

4. USAGE

5. MAINTENANCE & CARE

Dear Customer,

Thank you for purchasing this Cooking Hob. The safety precautions and recommendations in these instructions are for your own safety and that of others.They will also provide a means by which to make full use of the features offered by your appliance.

Please keep this booklet in a safe place. It may be useful in future, either to yourself or to others in the event that doubts should arise relating to its operation.

This appliance must be used only for its intended purpose, that is for the domestic cooking of foodstuffs. Any other form of usage is to be considered as inappropriate and therefore dangerous.

The manufacturer declines all responsibility in the event of damage caused by improper or incorrect use of the appliance.

CE Declaration of conformity

• This cooking hob has been designed to be used only for cooking. Any other use (such as heating a room) is improper and dangerous.

• This cooking hob has been designed, constructed, and marketed in compliance with:

- Safety requirements of the “Low voltage” Directive 2006/95/EC;

- Safety requirements of the “EMC” Directive 89/336/EC;

- Requirements of the Directive 93/68/EC. GB

ELECTRIC HOB

1x145 Hotplate 1x145 Rapid Hotplate 1x180 Hotplate 1x180 Rapid Hotplate

Electrical hotplate

Control Knobs

On/Off Light

For Electrical Hotplate

BEFORE USING FOR THE FIRST TIME

Read the insructions carefully before installing and using the appliance.

After unpacking the appliance, make sure it is not damaged. In case of doubt, do not use appliance and contract your supplier or a qualifed engineer. Remove all packaging and do not leave the packing material( plastic bags, polystyrene, bands etc.) in easy reach of children as they may cause serious injury. The packaging materials are recyclable. The appliance should be installed and all the electrical connections made by a qualifed engineer in compliance with local regulations in force and following the manufacturers instructions. Do not attempt to modify the technical properties of the appliance, it may become dangerous to use .

Electrical hoplate

DESCRIPTION OF THE HOB

Control Knobs

On/Off Light

For Electrical Hotplate

Note: Appearance of your hob maybe different than the model shown above due to production changes.

This appliance has been designed for domestic use only. The appliance is NOT suitable for use within a semi-commercial, commercial or communal environment. It must only be used for the purpose of heating

food or cooking food. Any other use for example heating room or any surface and operate without vessel is forbidden. If it is used like that, it will be dangerous, invalidate the warranty and all responsibility will belong to user.

SAFETY INSTRUCTIONS

Please comply with these instructions. If you do not, any damage resulting from improper, incorrect or negligent use or improper connection or installation is not covered by the warranty.

· Additions or modifications to the appliance are not permitted.

· Do not place or store flammable liquids, highly inflammable materials or

fusible objects on or near the appliance.

· Children must be kept away from the appliance.

· The appliance may only be installed and connected by an authorised and

qualified installer.

· The electrical safety of this hob is guaranteed only if it is connected to a properly earthed system, which complies with the electrical safety standards.

· Built-in appliances may only be used after they have been installed in suitable built-in units and work surfaces that meet the standards.

· Do not put pressure on the power supply cable while fitting the hob.

· Power supply cable length should not exceed 2m for isolation safety.

· Repairs to the appliance must only be carried out by authorised service

personnel.

· Make sure all the packaging has been removed before you use the appliance.

· Cables from electrical appliances must not touch the hot surface of the appliance

or hot cookware.

· Never leave the the appliance hob unattended when cooking with fat or oil. They

can rapidly catch fire if overheated.

· Be careful when using small household appliances, such as irons, near the elements.

· Do not use the cooking zones with empty cookware or without cookware.

· Make sure all the controls are in the off position when not in use.

· For cleaning, the appliance must be switched off and cooled down.

· For safety reasons, the cleaning of the appliance with steam jet or high-pressure

cleaning equipment is not permitted.

· Use only stable flat-based pans.

· This appliance is not intended for use by persons( including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

· Children should be supervised to ensure that they do not play with the appliance.

WARNING

· When correctly installed, your product meets all safety requirements laid down

for this type of product category. However special care should be taken around the underneath of the appliance as this area is not designed or intended to be touched and may contain sharp or rough edges, that may cause injury.

· Fire Risk! Do not leave inflammable materials on the Hob top.

· Make sure that electrical cords connecting other appliances in the proximity cannot

come in to contact with the Hob top.

· Do not scratch the hob with sharp objects. Don't use the hob as a work surface.

· Before disposing of an unwanted appliance, it is recommended that it is made

inoperative and that all potentially hazardous parts are made harmless.

· If the supply cord is damaged, it must be replaced by the manufacturer, its

service agent or similarly qualified person in order to avoid an electrical hazard.

The electrical connection of this hob should be carried out by an authorised service personnel or a qualifed electirician, according to the instructions in this guide and in compliance with the current regulations.

Prior to installation, ensure that the local distribution contitions and the adjustment

of the appliance are compatible .

· The laws, ordinances, directives and standards in force in the country of use are to

be followed (safety regulations, proper recycling in accordance with the regulations, etc.).

Locating your built-in hob

After removing the packaging material from the appliance and its accessories, ensure that the hob damaged. If you suspect any damage do not use the appliance and contact the store where you purchased this hob.

This built-in hob is to be inserted into a cut out of a worktop. It will be electrically

connected with the switch box below counter level, especially provided for this purpose.

INSTALLATION

Installation and operation - in comformity with these instructions - according to the Appliances Safety Law and The Applicable Regulations in force in the area the hob is to be installed.

Cut an opening with the dimensions shown in the picture bellow.

Neighboorhood walls A [mm] B [mm] Combustible 60 150 Non-combustible 25 40

The Hob is supplied with is special seal in order to avoid any liquid ingress in the work top. Cut out and opening in the top of your kitchen unit that corresponds to the measurements given in the picture. Apply the self adhesive seal to all edges of the opening and carefully fit the hob into the opening and such a way that the knobs will be on the right hand side. Secure by tightening the clamps as in the picture.

The thickness of the top of your kitchen unit must be between the dimensions given in the picture below. For a thickness of less than the given dimension ‘’25 mm’’ thick wooden spacers can be inserted between the bracket and undersurface. If the thickness of the top is greater than given ‘’25 mm’’ slots can be cut in the under surface of the furniture to house the bracket.

SECTION XSEC0001-XSEC0001

t > 25mm

SECTION XSEC0002-XSEC0002

t < 25mm

ELECTRICAL CONNECTION OF YOUR HOB

Before proceeding with the electical connection verify that:

The current carrying capasity of the system and the socket is adequate for the

maximum power rating of the hob.

The voltage indicated on the rating label is the same as the supply voltage.

Do not use for connection any reductions, adapters or shunts because they may

cause overheating.

Electrical connection of a built-in hob to an electric source is done with a cable

situated on the bottom of the built-in hob. Electrical installation of the residence and the electric current socket must be earthed and conform with safety regulations. The manufacturer declines responsibility should the appliance be installed without the above mentioned conditions.

The appliance is provided for fixed connection to the power supply.

The connection of the appliance to an electrical source must be done by an qualified

technician (Connecting diagram given below).

A circuit breaker with a contact opening of at least 3 mm, rated 20A and delayed

functioning type must be installed inside the supply circuit.

· Cooking hobs not provided with supply cord.

230-240V~

3x2.5mm²

400-415V 2N~

4x1.5mm²

+ 23 hidden pages