NordicTrack 831.24977, T7.0 Assembly Manual
QUICK ASSEMBLY GUIDE
NORDICTRACK® T7.0 Treadmill • Model No. 831.24977 • Revised 08/19/11
For detailed instructions, see the User’s Manual. Note: The underside of the walking belt is coated with highperformance lubricant. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth
and a mild, non-abrasive cleaner.
#10 Star
Wa
sher (5)–4
#8 x 1/2" Ground
Screw (6)–1
3/8" x 2" Bolt (2)–2
5/16" Star
Washer (8)–4
#8 x 1/2" Screw
(1)–14
5/16" x 2 3/4" Screw (12)–4
3/8" Star
Washer (10)–6
#8 x 3/4" Tek
Screw (13)–8
3/8" x 2 1/2" Bolt (7)–2
3/8" Nut (9)–4
#10 x 3/4" Screw
(4)–4
3/8" x 4" Screw (3)–6
1. Pull the Upright Wire (91) and the Base Ground
Wire (86) through the hole. Remove and discard
the Screw (A). Attach the Base Ground Wire.
6
86
91
A
Hole
90
Tie
Cut
91
2. Attach a Wheel (93). Attach a Thick Base Pad
(37) and a Thin Base Pad (92). Press the Base
Cap (87) in.
87
3. Route the Upright Wire (91) through the Left
Upright (84).
84
91
Wire
Tie
84
91
Wire
Tie
4. Attach the Left Upright (84). Then, repeat steps
2 and 4 on the right side.
13
37
13
92
7
3
84
10
93
9
Wires
2
Loading...