QUICK ASSEMBLY GUIDE
NordicTrack® T5.5 Treadmill • Model No. 831.24975 • Revised 07/29/11
For detailed instructions, see the User’s Manual. Note: The underside of the walking belt is coated with highperformance lubricant. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth
and a mild, non-abrasive cleaner.
#10 Star
Washer (11)–4
#8 x 1/2" Ground
Screw (1)–1
1/4" x 1"
Screw (9)– 4
3/8" x 2" Bolt (12)–2
5/16" Star
Washer (8)–2
#8 x 3/4" Screw
(6)–10
3/8" Star
Washer (5)–6
#10 x 3/4" Screw
(13)–4
5/16" x 1" Flat
Head Screw (10)–4
3/8" x 2 1/2" Bolt (2)–2
3/8" Nut (3)–4
#8 x 1" Screw
(94)–4
5/16" x 1"
Bolt (7)–2
3/8" x 4" Screw (4)–6
1. Attach the Base Ground Wire (92). Press the
Base Cap (77) in.
1
92
Cut
77
2. Attach a Wheel (81).
4. Attach the Left Upright (75). Press a Base Cap
(not shown) in, and then repeat steps 2 and 4
on the right side.
4
75
5
5. Slide the Base Covers (73, 74) and the Upright
Covers (99, 93) onto the Uprights (75, 76).
2
81
3
3. Route the Upright Wire (70) through the Left
Upright (75).
75
70
75
73
99
93
76
74
2