Nordic ID EV15 Configuration Manual

Download

Conﬁguration Manual

for

EV15 scanner

Contents

1 The linear imager:

2 Basic conﬁguration codes

2.1 Enabling codes 2

2.2 Reader optimization

3 Advanced conﬁguration 4

4 Codabar

4.1 Symbology identiﬁer 4

4.2 CLSI library system

4.3 Check digit (AIM recommendation) 5

4.4 Barcode length

4.5 Concatenation

4.5.1 Concatenation mode 6

5 Codablock 6

5.1 Codablock A 6

5.1.1 Symbology identiﬁer 7

6 Code 11 8

6.1 Symbology identiﬁer 8

6.2 Check digit

6.3 Barcode length

7 Code 39 9

7.1 Symbology identiﬁer 9

7.2 Format

7.3 Start / Stop 11

7.3.1 Accepted characters 11

7.4 Check digit 11

7.4.1 Modulo 43 11

7.4.2 French CIP 1

7.4.3 Italian CIP / Code 32 1

7.5 Barcode length 12

7.6 Reading range 12

7.7 Reading tolerance 1

8 Code 93 / Code 93i 13

8.1 Symbology identiﬁer 13

8.2 Barcode length 13

9 Code 128 / EAN 128 14

9.1 Symbology identiﬁer 14

9.2 EAN 128 identiﬁer 1

9.3 CIP 128 French farmaneutical codes 15

9.4 FNC1 separator character (EAN 128 norms) 1

9.5 Barcode length 1

9.6 Reading range 1

9.7 Reading

tolerance 16

9.8 ISBT 128 16

9.8.1 Transmit 16

9.8.2 Concatenate 1

9.9 GTIN processing for EAN 128 18

9.10 Irregular EAN 128 1

10 EAN.UCC composite 18

10.1 CC-A/B 18

10.2 CC-C 1

10.3 UCC / EAN-128 Emulation 1

10.4 UPC / EAN composite message decoding 1

10.5 Symbology identiﬁer 19

10.6 Linear transmission only 2

11 Interleaved 2 of 5 20

11.1 Symbology identiﬁer 20

11.2 Check digit 20

11.2.1 Mod 10 21

11.2.2 French CIP HR 2

11.3 Barcode length 21

11.4 Reading range 2

12 Matrix 2 of 5 22

12.1 Symbology identiﬁer 22

12.2 Start / stop character 2

12.3 Barcode length 2

13 MicroPDF 417 23

13.1 Symbology identiﬁer 23

13.2 Code 128 emulation 23

14 MSI code 24

14.1 Symbology identiﬁer 24

14.2 Check digit 2

14.2.1 Mod 10 24

14.2.2 Double mod 10 2

14.3 Barcode length 24

15 PDF 417 25

15.1 Symbology identiﬁer 25

15.2 Macro PDF 2

15.2.1 Control header 25

15.2.3 Optional ﬁelds 2

16 Plessey code 27

16.1 Symbology identiﬁer 27

16.1.2 Check digit 2

16.1.3 Barcode length 2

17 RSS 28

17.1 RSS 14 28

17.1.1 Symbology identiﬁer 28

17.2 Limited 28

17.2.1 Symbology identiﬁer 28

17.3 Expanded 29

17.3.1 Symbology identiﬁer 29

18 Standard 2 of 5 29

18.1 Symbology identiﬁer 29

18.2 Format 30

18.3 Check digit mod 10 3

18.4 Barcode length 3

19 Telepen 31

19.1 Symbology identiﬁer 31

19.2 Format 3

19.3 Barcode length 31

20 TLC 39 32

20.1 Symbology identiﬁer 32

20.2 Linear transmission only 3

20.3 ECI security 32

21 UPC / EAN 33

21.1 UPC-E1 33

21.2 Add-on digits 3

21.2.1 Add-on 2 34

21.2.2 Add-on 5 3

21.2.3 Security level 3

21.3 Check digit 35

21.4 UPC number system 3

21.4.1 UPC-A 36

21.4.2 UPC

-C 36

21.5 Re-encoding UPC-A, UPC-E, EAN-8 36

21.6 ISBN 3

21.7 ISMN 3

21.8 ISSN 38

21.9 GTIN processing 3

21.10 Reading range 3

Conﬁguration manual for EV15 scanner July 2006

This guide offers the barcodes needed for conﬁguring the RF6X1 with a EV15 linear imager.

1 The linear imager:

The Linear imager can be easily recognised by comparing it to the picture below.

Imager lens

Beam reﬂector Beam reﬂector

Also the linear imager scanner beam is a bit more blurred than the laser.

2 Basic conﬁguration codes

2.1 Enabling codes

• Resets all conﬁguration parameters to their default values

reset factory defaults

\60\08\55\24

disable all symbologies

\60\08\55\23

• Deactivates all the symbologies activated

• Use the “not active” options to deactivate individual symbologies

• Does not reset individual parameter settings for each symbology (when you reactivate a symbology, you recover the parameter settings stored in memory for that symbology when it was disabled - use reset factory defaults to reset all the symbology parameters to their factory default settings)

Codabar - active

\60\01\4B\20\00\02\40

Code 39 - active (*)

\60\01\50\40\00\02\40

Code 128 / EAN 128 - Code 128 active (*)

\60\01\53\20\00\02\40

UPC / EAN - EAN-8 active (*)

\60\02\08\42\00\02\40

UPC / EAN - EAN-13 active (*)

\60\02\08\43\00\02\40

Code 128 / EAN 128 - EAN 128 active (*)

\60\01\53\22\00\02\40

Interleaved 2 of 5 - active

\60\01\56\00\00\02\40

PDF417 - active (*)

\60\02\0B\20\00\02\40

Conﬁguration manual for EV15 scanner July 2006

Standard 2 of 5 - active

\60\02\00\40\00\02\40

UPC / EAN - UPC-A active (*)

\60\02\08\40\00\02\40

UPC / EAN - UPC-E active (*)

\60\02\08\41\00\02\40

read optimization - sensor optimization -

automatic (*)

\60\03\26\02\00\00\00

read optimization - sensor optimization -

1-dimensional codes

\60\03\26\02\00\02\40

read optimization - sensor optimization -

stacked codes

\60\03\26\02\00\05\20

2.2 Reader optimization

disable all symbologies

\60\08\55\23

• Deactivates all the symbologies activated

• Use the “not active” options to deactivate individual symbologies

disable all extended reading ranges

\60\08\55\25

Codabar - not active (*)

\60\01\4B\20\00\00\00

Codabar - active

\60\01\4B\20\00\02\40

Codabar - symbology identiﬁer - UDSI - default “B7” (*)

\60\01\4C\40\00\00\02\01\50\37

Codabar - symbology identiﬁer - code mark -

default “ D “ (*)

\60\01\4B\28\01\55\20

Codabar - start/stop - not transmitted (*)

\60\01\4B\38\00\00\00

Codabar - start/stop - a, b, c, d

\60\01\4B\38\00\02\40

Codabar - start/stop - A, B, C, D

\60\01\4B\38\00\05\20

Codabar - start/stop - a, b, c, d / t, n, *, e

\60\01\4B\38\00\08\00

4 Codabar

4.1 Symbology identiﬁer

• Deactivates the extended reading range for all symbologies with this option

• If you do not use extended reading range, we recommend deactivation to increase decode rate

3 Advanced conﬁguration

Conﬁguration manual for EV15 scanner July 2006

Codabar - start/stop - DC1, DC2, DC3, DC4

\60\01\4B\38\00\0A\40

Codabar - CLSI library system -

not active (*)

\60\01\4B\39\00\00\00

Codabar - CLSI library system - active (insert spaces)

\60\01\4B\39\00\02\40

Codabar - check digit (AIM recommendation) -

not used (*)

\60\01\4B\2C\00\00\40\02\20\00

Codabar - check digit (AIM recommendation) - checked

and transmitted

\60\01\4B\2C\00\03\20\02\20\01

Codabar - check digit (AIM recommendation) - checked but not transmitted

\60\01\4B\2C\00\03\20\02\20\00

4.2 CLSI library system

• Spaces inserted after characters 1, 5, 10 in the 14character label (used in the USA by libraries using the CLSI system)

Example: “39990000192148” is transmitted as “3 9990

00019 2148”

• Start/stop can be transmitted or not transmitted as required

• AIM has a recommended check character for Codabar

• Each Codabar data character (including Start/Stop) has a value assigned to it:

0 = 0 1 = 1 2 = 2 3 = 3 4 = 4 5 = 5 6 = 6 7 = 7 8 = 8 9 = 9 - = 10 $ = 11 : = 12 / = 13 , = 14 + = 15 A = 16 B = 17 C = 18 D = 19

• The values are added and the check is calculated: check = [(next multiple of 16) - (sum of assigned AIM values)]

Example data characters: A 0 1 2 3 4 B AIM values = 16 + 0 + 1 + 2 + 3 + 4 + 17: 43 next multiple of 16: 48 check = 48 - 43: 5 ﬁnal message: A 0 1 2 3 4 5 B

4.3 Check digit (AIM recommendation)

4.4 Barcode length

Codabar - barcode length - any length

\60\01\4B\30\00\00\40\02\1D\20

Codabar - barcode length - minimum length = 6 (*)

\60\01\4B\30\00\10\40\02\1D\20

Codabar - concatenation - not active (*)

\60\01\4B\3A\00\00\00

Codabar - concatenation - transmit all codes (single,

concatenated)

\60\01\4B\3A\00\05\20

4.5 Concatenation

• 2 adjacent Codabar codes scanned in a single sweep can be transmitted as a single message

1. Choose one of the transmission options to activate concatenation

2. Choose a concatenation mode option to indicate when you want adjacent codes to be concatenated

• Intermediate start/stop characters are not transmitted (only ﬁrst start and last stop are transmitted)

Codabar - concatenation - transmit concatenated codes

only

\60\01\4B\3A\00\02\40

4.5.1 Concatenation mode

Codabar - concatenation - concatenation mode - no start/

stop restrictions (*)

\60\01\4B\3B\00\00\00

Codabar - concatenation - concatenation mode - stop 1

= start 2

\60\01\4B\3B\00\02\40

Codabar - concatenation - concatenation mode - ABC

(American Blood Commission)

\60\01\4B\3B\00\05\20

5 Codablock

Codablock - Codablock A - not active (*)

\60\02\0E\00\00\00\00

Codablock - Codablock A - active

\60\02\0E\00\00\02\40

5.1 Codablock A

Conﬁguration manual for EV15 scanner July 2006

Codablock - Codablock A - symbology identiﬁer - UDSI

- default “K0” (*)

\60\02\0F\20\00\00\02\02\08\30

5.1.1 Symbology identiﬁer

Codablock - Codablock A - symbology identiﬁer - code

mark - default “ * “ (*)

\60\02\0E\08\01\10\00

Codablock - Codablock F - not active (*)

\60\02\0E\01\00\00\00

Codablock - Codablock F - active

\60\02\0E\01\00\02\40

Codablock - Codablock F - symbology identiﬁer - UDSI

- default “K1” (*)

\60\02\0F\21\00\00\02\02\08\31

Codablock - Codablock F - symbology identiﬁer - code mark - default “ * “ (*)

\60\02\0E\09\01\10\00

Code 11 - not active (*)

\60\02\06\00\00\00\00

6 Code 11

Code 11 - active

\60\02\06\00\00\02\40

Code 11 - symbology identiﬁer - UDSI - default “C1” (*)

\60\02\07\20\00\00\02\01\53\11

6.1 Symbology identiﬁer

Code 11 - symbology identiﬁer - code mark - default “ * “

(*)

\60\02\06\08\01\10\00

Code 11 - check digits - 1 digit (*)

\60\02\06\0C\00\02\40

Code 11 - check digits - 2 digits

\60\02\06\0C\00\05\20

Code 11 - check digits - checked and transmitted (*)

\60\02\06\14\00\02\40

6.2 Check digit

Code 11 - check digits - checked but not transmitted

\60\02\06\14\00\00\00

Code 11 - barcode length - any length (*)

\60\02\06\10\00\00\4A\02\1D\20

6.3 Barcode length

Conﬁguration manual for EV15 scanner July 2006

Code 39 - active (*)

\60\01\50\40\00\02\40

7 Code 39

• Alphanumeric symbology

• Letter case not deﬁned - transmitted in upper case

• Format: standard 43 characters (default) or full ASCII

Code 39 - not active

\60\01\50\40\00\00\00

Code 39 - symbology identiﬁer - UDSI - default “B1” (*)

\60\01\52\00\00\00\02\01\50\31

7.1 Symbology identiﬁer

Code 39 - symbology identiﬁer - code mark -

default “ * “ (*)

\60\01\50\48\01\10\00

Code 39 - format - standard 43 characters (*)

\60\01\50\5A\00\00\00

7.2 Format

Code39 ASCII Hex Dec

0 0 30 48

1 1 31 49

2 2 32 50

3 3 33 51

4 4 34 52

5 5 35 53

6 6 36 54

7 7 37 55

8 8 38 56

9 9 39 57

A A 41 65

B B 42 66

C C 43 67

D D 44 68

E E 45 69

F F 46 70

G G 47 71

H H 48 72

I I 49 73

J J 4A 74

K K 4B 75

L L 4C 76

Code30 ASCII Hex Dec

M M 4D 77

N N 4E 78

O O 4F 79

P P 50 80

Q Q 51 81

R R 52 82

S S 45 83

T T 54 84

U U 55 85

V V 56 86

W W 57 87

X X 58 88

Y Y 59 89

Z Z 5A 90

Space SP 20 32

$ $ 24 36

% % 25 37

* * 2A 42

+ + 2B 43

- - 2D 45

. . 2E 46

/ / 2F 47

Code 39 - format - full ASCII (extended)

\60\01\50\5A\00\02\40

• Extra characters encoded using 1 of 4 control characters ($, %, /, +) combined with a letter:

Code 39 ASCII Hex Dec

%U NUL 00 0

$A SOH 01 1

$B STX 02 2

$C ETX 03 3

$D EOT 04 4

$E ENQ 05 5

$F ACK 06 6

$G BEL 07 7

$H BS 08 8

$I HT 09 9

$J LF 0A 10

$K VT 0B 11

$L FF 0C 12

$M CR 0D 13

$N SO 0E 14

$O SI 0F 15

$P DLE 10 16

$Q DC1 11 17

$R DC2 12 18

$S DC3 13 19

$T DC4 14 20

$U NAK 15 21

$V SYN 16 22

$W ETB 17 23

$X CAN 18 24

$Y EM 19 25

$Z SUB 1A 26

%A ESC 1B 27

%B FS 1C 28

%C GS 1D 29

%D RS 1E 30

%E US 1F 31

Space SP 20 32

/A ! 21 33

/B “ 22 34

/C # 23 35

$ $ 24 36

% % 25 37

/F & 26 38

/G ‘ 27 39

/H ( 28 40

/I ) 29 41

/J * 2A 42

+ + 2B 43

/L , 2C 44

/M - 2D 45

/N . 2E 46

/ / 2F 47

0 0 30 48

1 1 31 49

2 2 32 50

3 3 33 51

4 4 34 52

5 5 35 53

6 6 36 54

7 7 37 55

8 8 38 56

9 9 39 57

/Z : 3A 58

%F ; 3B 59

%G < 3C 60

%H = 3D 61

%I > 3E 62

%J ? 3F 63

%V @ 40 64

A A 41 65

B B 42 66

C C 43 67

D D 44 68

E E 45 69

F F 46 70

G G 47 71

H H 48 72

I I 49 73

J J 4A 74

K K 4B 75

L L 4C 76

M M 4D 77

N N 4E 78

O O 4F 79

P P 50 80

Q Q 51 81

R R 52 82

S S 45 83

T T 54 84

U U 55 85

V V 56 86

W W 57 87

X X 58 88

Y Y 59 89

Z Z 5A 90

%K [ 5B 91

%L \ 5C 92

%M ] 5D 93

%N ^ 5E 94

%O _ 5F 95

%W ` 60 96

+A a 61 97

+B b 62 98

+C c 63 99

+D d 64 100

+E e 65 101

+F f 66 102

+G g 67 103

+H h 68 104

+I i 69 105

+J j 6A 106

+K k 6B 107

+L l 6C 108

+M m 6D 109

+N n 6E 110

+O o 6F 111

+P p 70 112

+Q q 71 113

+R r 72 114

+S s 73 115

+T t 74 116

+U u 75 117

+V v 76 118

+W w 77 119

+X x 78 120

+Y y 79 121

+Z z 7A 122

%P { 7B 123

%Q | 7C 124

%R } 7D 125

%S ~ 7E 126

%T DEL 7F 127

Conﬁguration manual for EV15 scanner July 2006

Code 39 - start/stop - not transmitted (*)

\60\01\50\58\00\00\00

7.3 Start / Stop

Code 39 - start/stop - transmitted

\60\01\50\58\00\02\40

7.3.1 Accepted characters

Code 39 - start/stop - accepted characters -

* only (standard Code 39) (*)

\60\01\50\59\00\05\20

Code 39 - start/stop - accepted characters -

$ only (Trioptic Code 39)

\60\01\50\59\00\02\40

Code 39 - start/stop - accepted characters -

$ and * (standard and Trioptic Code 39)

\60\01\50\59\00\08\00

7.4 Check digit

Code 39 - check digit - not used (*)

\60\01\50\4C\00\00\42\02\20\00

7.4.1 Modulo 43

• Provides extra validation of data

• Activation deactivates all other check digits

Code 39 - check digit - modulo 43 - checked and

transmitted

\60\01\50\4C\00\03\22\02\20\01

Code 39 - check digit - modulo 43 -

checked but not transmitted

\60\01\50\4C\00\03\22\02\20\00

Code 39 - check digit - French CIP -

checked and transmitted

\60\01\50\4C\00\06\02\02\20\01

• Provides extra validation of data

• Activation deactivates all other check digits

7.4.2 French CIP

Code 39 - check digit - French CIP -

checked but not transmitted

\60\01\50\4C\00\06\02\02\20\00

• Italian pharmaceutical industry, also known as Code 32

• Transmitted as standard Code 39 if checksum not validated

• Activation deactivates all other check digits

7.4.3 Italian CIP / Code 32

Code 39 - check digit - Italian CPI / Code 32 -

checked and transmitted

\60\01\50\4C\00\08\42\02\20\01

Code 39 - check digit - Italian CPI / Code 32 -

checked but not transmitted

\60\01\50\4C\00\08\42\02\20\00

7.5 Barcode length

Code 39 - barcode length - any length (*)

\60\01\50\50\00\00\42\02\1D\20

Code 39 - barcode length - minimum length = 6

\60\01\50\50\00\10\42\02\1D\20

Code 39 - reading range - extended (*)

\60\01\50\47\00\02\40

7.6 Reading range

7.7 Reading tolerance

• Sets the tolerance level for reading hard to read bar codes

• Quiet zone veriﬁcation (space before and after bar code to ensure correct decoding)

Code 39 - reading range - normal

\60\01\50\47\00\00\00

• Most permissive (reads codes of variable quality)

Code 39 - reading tolerance - high (*)

\60\01\50\4F\00\00\00

Conﬁguration manual for EV15 scanner July 2006

Code 39 - reading tolerance - medium

\60\01\50\4F\00\02\40

Code 39 - reading tolerance - low

\60\01\50\4F\00\05\20

• Least permissive (only reads high quality codes that meet ofﬁcial Code 39 standards)

Code 93 / Code 93i - not active (*)

\60\01\4E\00\00\00\00

8 Code 93 / Code 93i

• Code 93 alphanumeric full ASCII symbology - letter case deﬁned

• Code 93i (encompasses and extends Code 93) alphanumeric, full and extended ASCII, all Unicode characters, etc.

Code 93 / Code 93i - active

\60\01\4E\00\00\02\40

Code 93 / Code 93i - symbology identiﬁer - UDSI -

default “B6” (*)

\60\01\4F\20\00\00\02\01\50\36

Code 93 / Code 93i - symbology identiﬁer -

code mark - default “ D “ (*)

\60\01\4E\08\01\55\20

8.1 Symbology identiﬁer

8.2 Barcode length

Code 93 / Code 93i - barcode length -

any length (*)

\60\01\4E\10\00\03\21\02\1D\20

Code 93 / Code 93i - barcode length -

minimum length = 6

\60\01\4E\10\00\10\41\02\1D\20

9 Code 128 / EAN 128

• Alphanumeric full ASCII symbology - letter case deﬁned

• “EAN 128” = Code 128 with the FNC1 character in the ﬁrst position

Code 128 / EAN 128 - Code 128 active (*)

\60\01\53\20\00\02\40

Code 128 / EAN 128 - Code 128 not active

\60\01\53\20\00\00\00

Code 128 / EAN 128 - EAN 128 active (*)

\60\01\53\22\00\02\40

Code 128 / EAN 128 - EAN 128 not active

\60\01\53\22\00\00\00

9.1 Symbology identiﬁer

Code 128 / EAN 128 - symbology identiﬁer - UDSI -

Code 128 - default “B3” (*)

\60\01\54\40\00\00\02\01\50\33

Code 128 / EAN 128 - symbology identiﬁer - UDSI -

EAN 128 - default “C9” (*)

\60\01\54\41\00\00\02\01\53\19

Code 128 / EAN 128 - symbology identiﬁer - code mark

- Code 128 - default “ D “ (*)

\60\01\53\28\01\55\20

Code 128 / EAN 128 - symbology identiﬁer - code mark

- EAN 128 - default “ D “ (*)

\60\01\53\29\01\55\20

Code 128 / EAN 128 - EAN 128 identiﬁer -

include ]C1 identiﬁer (*)

\60\01\53\38\00\02\40

Code 128 / EAN 128 - EAN 128 identiﬁer -

remove ]C1 identiﬁer

\60\01\53\38\00\00\00

9.2 EAN 128 identiﬁer

• the ]C1 AIM identiﬁer for EAN 128 is automatically added by default in front of EAN 128 bar codes

Conﬁguration manual for EV15 scanner July 2006

Code 128 / EAN 128 -

CIP 128 French pharmaceutical codes - not active (*)

\60\01\53\2C\00\00\00

9.3 CIP 128 French farmaneutical codes

• Embedded CIP 39 data

• Fixed length 14 characters

• Code 128 character set C

Code 128 / EAN 128 -

CIP 128 French pharmaceutical codes - active

\60\01\53\2C\00\02\40

• Default = GS function character (ASCII 29)

• Used as separator when multiple identiﬁers and their ﬁelds are concatenated

• Example: useful for keyboard wedge interfaces where the GS character can not be transmitted

9.4 FNC1 separator character (EAN 128 norms)

Code 128 / EAN 128 - FNC1 separator character

(EAN 128 norms) - <GS> (1Dh) (*)

\60\01\53\39\00\4D\20

Code 128 / EAN 128 - barcode length -

any length (*)

\60\01\53\30\00\00\43\02\1D\20

9.5 Barcode length

Code 128 / EAN 128 - barcode length -

minimum length = 6

\60\01\53\30\00\10\43\02\1D\20

9.6 Reading range

• default setting is “extended” for increased reading distance

Code 128 / EAN 128 - reading range - extended (*)

\60\01\53\27\00\02\40

Code 128 / EAN 128 - reading range - normal

\60\01\53\27\00\00\00

Code 128 / EAN 128 - reading tolerance - high (*)

\60\01\53\2F\00\00\00

• sets the tolerance level for reading hard to read barcodes

9.7 Reading tolerance

Code 128 / EAN 128 - reading tolerance - medium

\60\01\53\2F\00\02\40

• Most permissive (reads codes of variable quality)

Code 128 / EAN 128 - reading tolerance - low

\60\01\53\2F\00\05\20

• Least permissive (only reads high quality codes that meet ofﬁcial Code 128 standards)

9.8 ISBT 128

• International Society of Blood Transfusion

• Activating ISBT 128 deactivates Code 128 / EAN 128 (to avoid confusion with Code 128 / EAN 128)

IMPORTANT:

- codes are not concatenated by default (default

transmission setting is “single codes only”)

- you must select one of the “concatenated codes”

transmission options to send concatenated codes (see “transmit” section)

Code 128 / EAN 128 - ISBT 128 - not active (*)

\60\01\53\21\00\00\00

Code 128 / EAN 128 - ISBT 128 - active

\60\01\53\21\00\03\23\01\4A\40\01\53\22\00\00\00

9.8.1 Transmit

Code 128 / EAN 128 - ISBT 128 - transmit -

single codes only (*)

\60\01\53\3A\00\00\00

Code 128 / EAN 128 - ISBT 128 - transmit -

concatenated codes only

\60\01\53\3A\00\02\40

• Codes are always transmitted as single codes (no concatenation)

• The product will only send one code even if it can “see” both codes of a code pair

• Only transmits concatenated codes, does not transmit single codes

• Default concatenation setting is “authorized ISBT 128 code pairs only” (see “concatenate” section)

Conﬁguration manual for EV15 scanner July 2006

Code 128 / EAN 128 - ISBT 128 - transmit -

single codes / concatenated codes

\60\01\53\3A\00\05\20

• Transmits single codes and concatenated codes

• If the product can only “see” one code of a code pair, it will send that code as a single code

• If the product can “see” both codes of a code pair, it will concatenate the codes if requested by the current

concatenation setting (see “concatenate” section)

• Default concatenation setting is “authorized ISBT 128 code pairs only”

Code 128 / EAN 128 - ISBT 128 - concatenate -

authorized ISBT 128 code pairs only (*)

\60\01\53\3B\00\00\00

9.8.2 Concatenate

IMPORTANT:

• Codes are not concatenated by default (default transmission setting is “single codes only”)

• You must select one of the “concatenated codes” transmission options to send concatenated codes (see “transmit” section)

• Code pairs are concatenated only if they comply with Section 4.1 of the “ISBT 128 Bar Code Symbology and Application Speciﬁcation for Labeling of Whole Blood and Blood Components” (June 2000, Version 1.2.1) :

• Donation Identiﬁcation Number + ABO/Rh (D) Blood Groups

• Donation Identiﬁcation Number + Donor Identiﬁcation Number

• Donation Identiﬁcation Number + Conﬁdential Unit Exclusion Status

• Product Code + Expiration Date

• Other code pairs are not concatenated

Code 128 / EAN 128 - ISBT 128 - concatenate -

all ISBT 128 code pairs

\60\01\53\3B\00\02\40

• GTIN = Global Trade Item Number

• GTIN processing transmits EAN 128 as the 14 character EAN.UCC GTIN

• To use GTIN processing you must also activate the EAN 128 symbology

IMPORTANT: When EAN 128 and GTIN processing are both activated it

is NOT possible to read normal EAN 128 codes

9.9 GTIN processing for EAN 128

Code 128 / EAN 128 - GTIN processing for EAN 128 -

not active (*)

\60\01\53\40\00\00\00

Code 128 / EAN 128 - GTIN processing for EAN 128 -

active

\60\01\53\40\00\02\40

9.10 Irregular EAN 128

• Has two FNC1 characters at the beginning instead of one

Code 128 / EAN 128 - irregular EAN 128 - active (*)

\60\01\53\23\00\02\40

Code 128 / EAN 128 - irregular EAN 128 - not active

\60\01\53\23\00\00\00

EAN.UCC Composite - CC-A/B -

not active (*)

\60\02\26\00\00\00\00

• Symbology consisting of a linear component and an adjacent 2-D composite component

10 EAN.UCC composite

EAN.UCC Composite - CC-A/B -

active

\60\02\26\00\00\02\40

10.1 CC-A/B

Conﬁguration manual for EV15 scanner July 2006

10.2 CC-C

EAN.UCC Composite - CC-C - not active (*)

\60\02\26\01\00\00\00

EAN.UCC Composite - CC-C - active

\60\02\26\01\00\02\40

10.3 UCC / EAN-128 Emulation

EAN.UCC Composite - UCC/EAN-128 emulation -

not active (*)

\60\02\26\03\00\00\00

EAN.UCC Composite - UCC/EAN-128 emulation -

active

\60\02\26\03\00\02\40

EAN.UCC Composite - UPC and EAN composite message

decoding - always linked (*)

\60\02\26\1E\00\02\40

10.4 UPC / EAN composite message decoding

EAN.UCC Composite - UPC and EAN composite message

decoding - never linked

\60\02\26\1E\00\00\00

EAN.UCC Composite - UPC and EAN composite message

decoding - auto-discriminate

\60\02\26\1E\00\05\20

10.5 Symbology identiﬁer

EAN.UCC Composite - symbology identiﬁer - UDSI -

CC-A/B - default “G0” (*)

\60\02\27\20\00\00\02\01\5D\50

EAN.UCC Composite - symbology identiﬁer - UDSI -

CC-C - default “G1” (*)

\60\02\27\21\00\00\02\01\5D\51

EAN.UCC Composite - symbology identiﬁer -

code mark - CC-A/B - default “ * “ (*)

\60\02\26\08\01\10\00

EAN.UCC Composite - symbology identiﬁer -

code mark - CC-C - default “ * “ (*)

\60\02\26\09\01\10\00

10.6 Linear transmission only

EAN.UCC Composite - linear transmission only -

not active (*)

\60\02\26\04\00\00\00

EAN.UCC Composite - linear transmission only -

active

\60\02\26\04\00\02\40

Interleaved 2 of 5 - not active (*)

\60\01\56\00\00\00\00

11 Interleaved 2 of 5

• Numerical symbology

• For GTIN compatibility set barcode length to one ﬁxed length of 14 characters

Interleaved 2 of 5 - active

\60\01\56\00\00\02\40

11.1 Symbology identiﬁer

Interleaved 2 of 5 - symbology identiﬁer -

UDSI - default “B2” (*)

\60\01\57\20\00\00\02\01\50\32

Interleaved 2 of 5 - symbology identiﬁer -

code mark - default “ I “ (*)

\60\01\56\08\02\02\40

11.2 Check digit

Interleaved 2 of 5 - check digit -

not used (*)

\60\01\56\0C\00\00\44\02\20\00

• Especially recommended for variable length Interleaved 2 of 5 and if “consecutive same read data validation” (data decoding security parameters) is not activated

Conﬁguration manual for EV15 scanner July 2006

Interleaved 2 of 5 - check digit - mod 10 -

checked and transmitted

\60\01\56\0C\00\03\24\02\20\01

11.2.1 Mod 10

• Activation deactivates all other check digits

Interleaved 2 of 5 - check digit - mod 10 -

checked but not transmitted

\60\01\56\0C\00\03\24\02\20\00

11.2.2 French CIP HR

• French pharmaceutical industry

• Only used for codes with 7 characters

• Activation deactivates all other check digits

Interleaved 2 of 5 - check digit - French CIP HR -

checked and transmitted

\60\01\56\0C\00\06\04\02\20\01

Interleaved 2 of 5 - check digit - French CIP HR -

checked but not transmitted

\60\01\56\0C\00\06\04\02\20\00

11.3 Barcode length

Interleaved 2 of 5 - barcode length -

minimum length = 6 (*)

\60\01\56\10\00\10\44\02\1D\20

• Interleaved 2 of 5 always encodes an even number of characters

• For codes with an odd number of characters, you can add a last character printed as 5 narrow bars (not transmitted)

• For GTIN compatibility set barcode length to one ﬁxed length of 14 characters

Interleaved 2 of 5 - barcode length -

ﬁxed lengths: 14

\60\01\56\10\00\26\04\02\18\00\01\56\12\00\00\44\02\1D\21

11.4 Reading range

Interleaved 2 of 5 - reading range - extended (*)

\60\01\56\07\00\02\40

Interleaved 2 of 5 - reading range - normal

\60\01\56\07\00\00\00

Matrix 2 of 5 - not active (*)

\60\01\58\40\00\00\00

12 Matrix 2 of 5

Matrix 2 of 5 - active

\60\01\58\40\00\02\40

Matrix 2 of 5 - symbology identiﬁer -

UDSI - default “B4” (*)

\60\01\5A\00\00\00\02\01\50\34

12.1 Symbology identiﬁer

Matrix 2 of 5 - symbology identiﬁer -

code mark - default “ D “ (*)

\60\01\58\48\01\55\20

Matrix 2 of 5 - start/stop character - regular (*)

\60\01\58\43\00\00\00

12.2 Start / stop character

• Start/stop characters and checksum not transmitted

Matrix 2 of 5 - start/stop character - China Post

\60\01\58\43\00\02\40

• Start/stop characters and checksum not transmitted

12.3 Barcode length

Matrix 2 of 5 - barcode length - any length

\60\01\58\50\00\00\45\02\1D\20

Matrix 2 of 5 - barcode length - minimum length = 6 (*)

\60\01\58\50\00\10\45\02\1D\20

Conﬁguration manual for EV15 scanner July 2006

MicroPDF417 - not active (*)

\60\02\0B\22\00\00\00

13 MicroPDF 417

• Two-dimensional symbology

• Alphanumeric full ASCII symbology - letter case deﬁned

• It is highly recommended to select “stacked codes” in sensor optimization

MicroPDF417 - active

\60\02\0B\22\00\02\40

13.1 Symbology identiﬁer

13.2 Code 128 emulation

MicroPDF417 - symbology identiﬁer -

UDSI - default “C8” (*)

\60\02\0C\41\00\00\02\01\53\18

MicroPDF417 - symbology identiﬁer -

code mark - default “ * “ (*)

\60\02\0B\29\01\10\00

MicroPDF417 - Code 128 emulation - not active (*)

\60\02\0B\25\00\00\00

MicroPDF417 - Code 128 emulation - active

\60\02\0B\25\00\02\40

• When active and reading a MicroPDF code containing a special ﬂag, the scanner transmits Code 128 AIM symbology identiﬁer instead of MicroPDF symbology identiﬁer ( ]C instead of ]L )

14 MSI code

14.1 Symbology identiﬁer

14.2 Check digit

14.3 Barcode length

MSI Code - not active (*)

\60\01\5B\20\00\00\00

MSI Code - active

\60\01\5B\20\00\02\40

MSI Code - symbology identiﬁer -

UDSI - default “B8” (*)

\60\01\5C\40\00\00\02\01\50\38

MSI Code - symbology identiﬁer -

code mark - default “ D “ (*)

\60\01\5B\28\01\55\20

14.2.1 Mod 10

MSI Code - check digit - mod 10 -

checked and transmitted (*)

\60\01\5B\2C\00\03\26\02\20\01

MSI Code - check digit - mod 10 -

checked but not transmitted

\60\01\5B\2C\00\03\26\02\20\00

• Activation deactivates all other check digits

14.2.2 Double mod 10

• Activation deactivates all other check digits

MSI Code - check digit - double mod 10 -

checked and transmitted

\60\01\5B\2C\00\06\06\02\20\01

MSI Code - check digit - double mod 10 -

checked but not transmitted

\60\01\5B\2C\00\06\06\02\20\00

MSI Code - barcode length - any length

\60\01\5B\30\00\00\46\02\1D\20

MSI Code - barcode length - minimum length = 6 (*)

\60\01\5B\30\00\10\46\02\1D\20

Conﬁguration manual for EV15 scanner July 2006

PDF417 - active (*)

\60\02\0B\20\00\02\40

15 PDF 417

• Two-dimensional symbology

• Alphanumeric full ASCII symbology - letter case deﬁned

PDF417 - not active

\60\02\0B\20\00\00\00

15.1 Symbology identiﬁer

15.2 Macro PDF

PDF417 - symbology identiﬁer - UDSI -

default “C7” (*)

\60\02\0C\40\00\00\02\01\53\17

PDF417 - symbology identiﬁer - code mark -

default “ * “ (*)

\60\02\0B\28\01\10\00

Macro PDF is used when :

• A long message requires more than one PDF417 label

• “optional ﬁelds” information must be transmitted to

the host application

PDF417 - macro PDF - control header -

not transmitted (*)

\60\02\0B\38\00\00\00

PDF417 - macro PDF - control header -

transmitted

\60\02\0B\38\00\02\40

15.2.1 Control header

• Only present in macro PDF codes

• Always transmitted with “unbuffered” option

• Transmit additional information if present in the label

• One or more ﬁelds possible in the same label

15.2.3 Optional ﬁelds

PDF417 - macro PDF - optional ﬁelds -

ﬁle name - not transmitted (*)

\60\02\0B\39\00\00\00

PDF417 - macro PDF - optional ﬁelds -

ﬁle name - transmitted

\60\02\0B\39\00\02\40

PDF417 - macro PDF - optional ﬁelds -

segment count - not transmitted (*)

\60\02\0B\3A\00\00\00

PDF417 - macro PDF - optional ﬁelds -

segment count - transmitted

\60\02\0B\3A\00\02\40

PDF417 - macro PDF - optional ﬁelds -

time stamp - transmitted

\60\02\0B\3B\00\02\40

PDF417 - macro PDF - optional ﬁelds -

sender - not transmitted (*)

\60\02\0B\3C\00\00\00

PDF417 - macro PDF - optional ﬁelds -

sender - transmitted

\60\02\0B\3C\00\02\40

PDF417 - macro PDF - optional ﬁelds -

addressee - not transmitted (*)

\60\02\0B\3D\00\00\00

PDF417 - macro PDF - optional ﬁelds -

addressee - transmitted

\60\02\0B\3D\00\02\40

PDF417 - macro PDF - optional ﬁelds - time stamp -

not transmitted (*)

\60\02\0B\3B\00\00\00

PDF417 - macro PDF - optional ﬁelds -

ﬁle size - not transmitted (*)

\60\02\0B\3E\00\00\00

PDF417 - macro PDF - optional ﬁelds - ﬁle size -

transmitted

\60\02\0B\3E\00\02\40

PDF417 - macro PDF - optional ﬁelds - checksum - not

transmitted (*)

\60\02\0B\3F\00\00\00

PDF417 - macro PDF - optional ﬁelds - checksum -

transmitted

\60\02\0B\3F\00\02\40

Conﬁguration manual for EV15 scanner July 2006

Plessey Code - not active (*)

\60\01\5E\00\00\00\00

16 Plessey code

Plessey Code - active

\60\01\5E\00\00\02\40

16.1 Symbology identiﬁer

Plessey Code - symbology identiﬁer -

UDSI - default “C2” (*)

\60\01\5F\20\00\00\02\01\53\12

Plessey Code - symbology identiﬁer -

code mark - default “ D “ (*)

\60\01\5E\08\01\55\20

16.1.2 Check digit

Plessey Code - check digit - not transmitted (*)

\60\01\5E\14\00\00\00

Plessey Code - check digit - transmitted

\60\01\5E\14\00\02\40

16.1.3 Barcode length

Plessey Code - barcode length - any length (*)

\60\01\5E\10\00\00\47\02\1D\20

Plessey Code - barcode length - minimum length = 6

\60\01\5E\10\00\10\47\02\1D\20

RSS - RSS 14 - active

\60\02\13\20\00\02\40

17 RSS

17.1 RSS 14

• Numerical symbology

• Reads the following types of RSS 14: RSS 14 standard RSS 14 stacked omni-directional RSS 14 truncated

RSS - RSS 14 - not active (*)

\60\02\13\20\00\00\00

17.1.1 Symbology identiﬁer

RSS - RSS 14 - symbology identiﬁer - UDSI -

default “C3” (*)

\60\02\14\40\00\00\02\01\53\13

RSS - RSS 14 - symbology identiﬁer - code mark -

default “ * “ (*)

\60\02\13\28\01\10\00

17.2 Limited

RSS - Limited - active

\60\02\13\21\00\02\40

RSS - Limited - not active (*)

\60\02\13\21\00\00\00

• Numerical symbology

• Does not read stacked version

RSS - Limited - symbology identiﬁer -

UDSI - default “C4” (*)

\60\02\14\41\00\00\02\01\53\14

17.2.1 Symbology identiﬁer

RSS - Limited - symbology identiﬁer -

code mark - default “ * “ (*)

\60\02\13\29\01\10\00

Conﬁguration manual for EV15 scanner July 2006

17.3 Expanded

RSS - Expanded - active

\60\02\13\22\00\02\40

- alphanumerical symbology

- reads the following types of RSS expanded:

RSS expanded limited

RSS - Expanded - not active (*)

\60\02\13\22\00\00\00

17.3.1 Symbology identiﬁer

RSS - Expanded - symbology identiﬁer -

UDSI - default “C5” (*)

\60\02\14\42\00\00\02\01\53\15

RSS - Expanded - symbology identiﬁer -

code mark - default “ * “ (*)

\60\02\13\2A\01\10\00

18 Standard 2 of 5

Standard 2 of 5 - not active (*)

\60\02\00\40\00\00\00

• Numerical symbology

• Default format = Identicon (6 start/stop bars)

• Also referred to as “Straight 2 of 5” and “Industrial 2 of 5”

Standard 2 of 5 - active

\60\02\00\40\00\02\40

18.1 Symbology identiﬁer

Standard 2 of 5 - symbology identiﬁer -

UDSI - default “B5” (*)

\60\02\02\00\00\00\02\01\50\35

Standard 2 of 5 - symbology identiﬁer -

code mark - default “ D “ (*)

\60\02\00\48\01\55\20

Standard 2 of 5 - format -

Identicon (6 start/stop bars) (*)

\60\02\00\58\00\00\00

18.2 Format

Standard 2 of 5 - format -

Computer Identics (4 start/stop bars)

\60\02\00\58\00\02\40

Standard 2 of 5 - check digit mod 10 -

not used (*)

\60\02\00\4C\00\00\48\02\20\00

18.3 Check digit mod 10

Standard 2 of 5 - check digit mod 10 -

checked and transmitted

\60\02\00\4C\00\03\28\02\20\01

Standard 2 of 5 - check digit mod 10 -

checked but not transmitted

\60\02\00\4C\00\03\28\02\20\00

Standard 2 of 5 - barcode length -

any length

\60\02\00\50\00\00\48\02\1D\20

18.4 Barcode length

Standard 2 of 5 - barcode length -

minimum length = 6 (*)

\60\02\00\50\00\10\48\02\1D\20

Conﬁguration manual for EV15 scanner July 2006

Telepen - not active (*)

\60\02\03\20\00\00\00

19 Telepen

• Alphanumeric full ASCII symbology - letter case deﬁned

• Default format = ASCII

Telepen - active

\60\02\03\20\00\02\40

19.1 Symbology identiﬁer

Telepen - symbology identiﬁer -

UDSI - default “C6” (*)

\60\02\04\40\00\00\02\01\53\16

Telepen - symbology identiﬁer -

code mark - default “ * “ (*)

\60\02\03\28\01\10\00

19.2 Format

Telepen - format - ASCII (*)

\60\02\03\38\00\00\00

Telepen - format - numeric

\60\02\03\38\00\02\40

19.3 Barcode length

Telepen - barcode length -

any length (*)

\60\02\03\30\00\00\49\02\1D\20

20 TLC 39

• TCIF Linked Code 39

• Symbology consisting of two elements: a MicroPDF417 code and a Code 39 code

• Available with ﬁrmware version 1.00 or higher

TLC 39 - not active (*)

\60\02\10\40\00\00\00

TLC 39 - active

\60\02\10\40\00\02\40

20.1 Symbology identiﬁer

TLC 39 - symbology identiﬁer -

UDSI - default “H0” (*)

\60\02\12\00\00\00\02\02\00\30

TLC 39 - symbology identiﬁer - code mark -

default “ * “ (*)

\60\02\10\48\01\10\00

20.2 Linear transmission only

TLC 39 - linear transmission only - not active (*)

\60\02\10\44\00\00\00

TLC 39 - linear transmission only - active

\60\02\10\44\00\02\40

20.3 ECI security

TLC 39 - ECI security - 10 (*)

\60\02\10\47\00\1A\40

• Used to differentiate between TLC 39 and standard Code 39

• Higher security level = lower decode rate

Conﬁguration manual for EV15 scanner July 2006

UPC / EAN - UPC-A active (*)

\60\02\08\40\00\02\40

21 UPC / EAN

UPC / EAN - UPC-A not active

\60\02\08\40\00\00\00

UPC / EAN - UPC-E active (*)

\60\02\08\41\00\02\40

UPC / EAN - UPC-E not active

\60\02\08\41\00\00\00

UPC / EAN - EAN-8 active (*)

\60\02\08\42\00\02\40

UPC / EAN - EAN-8 not active

\60\02\08\42\00\00\00

UPC / EAN - EAN-13 active (*)

\60\02\08\43\00\02\40

UPC / EAN - EAN-13 not active

\60\02\08\43\00\00\00

UPC / EAN - UPC-E1 - active

\60\02\08\4C\00\02\40

UPC / EAN - UPC-E1 - not active (*)

\60\02\08\4C\00\00\00

21.1 UPC-E1

UPC / EAN - symbology identiﬁer - UDSI - UPC-A -

default “A0” (*)

\60\02\0A\00\00\00\02\01\4D\50

• Unregular UPC-E with number system equal to 1 (usually the ﬁrst printed character)

• UPC-E must be active for UPC-E1 to be taken into account

UPC / EAN - symbology identiﬁer - UDSI - UPC-E -

default “E0” (*)

\60\02\0A\01\00\00\02\01\58\30

UPC / EAN - symbology identiﬁer - UDSI -

EAN-8 - default “FF” (*)

\60\02\0A\02\00\00\02\01\5B\26

UPC / EAN - symbology identiﬁer - UDSI -

EAN-13 - default “F” (*)

\60\02\0A\03\00\00\01\01\5A\40

UPC / EAN - symbology identiﬁer - code mark -

UPC-A - default “ A “ (*)

\60\02\08\48\01\4D\20

UPC / EAN - symbology identiﬁer - code mark -

UPC-E - default “ E “ (*)

\60\02\08\49\01\58\00

UPC / EAN - symbology identiﬁer - code mark -

EAN-8 - default “ FF “ (*)

\60\02\08\4A\01\5B\26

UPC / EAN - symbology identiﬁer - code mark -

EAN-13 - default “ F “ (*)

\60\02\08\4B\01\5A\40

UPC / EAN - add-on digits -

not required but transmitted if read (*)

\60\02\08\5D\00\00\00

21.2 Add-on digits

UPC / EAN - add-on digits -

required and transmitted

\60\02\08\5D\00\02\40

UPC / EAN - add-on digits - add-on 2 - not active (*)

\60\02\08\45\00\00\00

UPC / EAN - add-on digits - add-on 2 - active

\60\02\08\45\00\02\40

UPC / EAN - add-on digits - add-on 5 - not active (*)

\60\02\08\46\00\00\00

UPC / EAN - add-on digits - add-on 5 - active

\60\02\08\46\00\02\40

21.2.1 Add-on 2

21.2.2 Add-on 5

Conﬁguration manual for EV15 scanner July 2006

21.2.3 Security level

UPC / EAN - add-on digits - security level - 10 (*)

\60\02\08\47\00\1A\40

UPC / EAN - check digit - UPC-A - transmitted (*)

\60\02\08\54\00\02\40

• Used with “add-on not required but transmitted if read” option

• Deﬁnes security level for add-on 2 and add-on 5 (range 0 to 100)

UPC / EAN - check digit - UPC-A - not transmitted

\60\02\08\54\00\00\00

21.3 Check digit

UPC / EAN - check digit - UPC-E - transmitted (*)

\60\02\08\55\00\02\40

UPC / EAN - check digit - UPC-E - not transmitted

\60\02\08\55\00\00\00

UPC / EAN - check digit - EAN-8 - transmitted (*)

\60\02\08\56\00\02\40

UPC / EAN - check digit - EAN-8 - not transmitted

\60\02\08\56\00\00\00

UPC / EAN - check digit - EAN-13 - transmitted (*)

\60\02\08\57\00\02\40

UPC / EAN - check digit - EAN-13 - not transmitted

\60\02\08\57\00\00\00

UPC / EAN - UPC number system -

UPC-A - transmitted (*)

\60\02\08\58\00\02\40

21.4 UPC number system

UPC / EAN - UPC number system -

UPC-A - not transmitted

\60\02\08\58\00\00\00

UPC / EAN - UPC number system -

UPC-E - transmitted (*)

\60\02\08\59\00\02\40

UPC / EAN - UPC number system -

UPC-E - not transmitted

\60\02\08\59\00\00\00

• Regular UPC-A has a transmitted number system equal to 0

• To transmit the additional leading character (country code), select the “UPC-A transmitted as EAN-13” option

21.4.1 UPC-A

21.4.2 UPC-C

• Deactivate EAN-13 for unregular UPC-E with number system equal to 1 (usually the ﬁrst printed character)

UPC / EAN - re-encoding UPC-A, UPC-E, EAN-8 - UPC-A

transmitted as EAN-13 (*)

\60\02\08\5A\00\02\40

UPC / EAN - re-encoding UPC-A, UPC-E, EAN-8 - UPC-A

transmitted as UPC-A

\60\02\08\5A\00\00\00

21.5 Re-encoding UPC-A, UPC-E, EAN-8

• Converts decoded data to other code formats

• Transmission only takes into account the parameters available for the target bar code format

• Regular UPC-A has a transmitted number system equal to 0

• To transmit the additional leading character (country code), select the “UPC-A transmitted as EAN-13”

Conﬁguration manual for EV15 scanner July 2006

UPC / EAN - re-encoding UPC-A, UPC-E, EAN-8 - UPC-E

transmitted as UPC-E (*)

\60\02\08\5B\00\00\00

UPC / EAN - re-encoding UPC-A, UPC-E, EAN-8 - UPC-E

transmitted as UPC-A

\60\02\08\5B\00\02\40

UPC / EAN - re-encoding UPC-A, UPC-E, EAN-8 - EAN-8

transmitted as EAN 8 (*)

\60\02\08\5C\00\00\00

UPC / EAN - re-encoding UPC-A, UPC-E, EAN-8 - EAN-8

transmitted as EAN-13

\60\02\08\5C\00\02\40

21.6 ISBN

• International Standard Book Number

• EAN-13 code, the ﬁrst 3 characters “978” or “979” (except for “9790”) are ignored and the checksum (0..9, “X”) is calculated on the remaining characters

UPC / EAN - ISBN - not active (*)

\60\02\08\44\00\00\00

UPC / EAN - ISBN - active

\60\02\08\44\00\02\40

• International Standard Music Number

• EAN-13 code starting with “9790”, the ﬁrst 3 characters “979” are ignored and the ﬁrst “0” is converted to “M”

21.7 ISMN

UPC / EAN - ISMN - not active (*)

\60\02\09\01\00\00\00

UPC / EAN - ISMN - active

\60\02\09\01\00\02\40

21.8 ISSN

• International Standard Serial Number

• EAN-13 code, the ﬁrst 3 characters “977” are ignored and the ISBN checksum (0..9, “X”) is calculated on the remaining characters

UPC / EAN - ISSN - not active (*)

\60\02\09\02\00\00\00

UPC / EAN - ISSN - active

\60\02\09\02\00\02\40

UPC / EAN - GTIN processing - not active (*)

\60\02\09\00\00\00\00

• GTIN = Global Trade Item Number

• GTIN processing transmits UPC/EAN as the 14 character EAN.UCC GTIN

• To use GTIN processing you must also activate the desired UPC/EAN symbologies

21.9 GTIN processing

UPC / EAN - GTIN processing - active

\60\02\09\00\00\02\40

21.10 Reading range

UPC / EAN - reading range - extended (*)

\60\02\08\4D\00\02\40

UPC / EAN - reading range - normal

\60\02\08\4D\00\00\00

Nordic ID Oy owns all rights to this manual. All rights reserved. Copying this manual without the written permission from the manufacturer by printing, copying, recording or by any other means or the full or partial translation of the manual to any other language including all programming languages using any electrical, mechanical, magnetic, optical, manual or other methods or devices is forbidden.

Nordic ID reserves the right to change the technical speciﬁcations or functions of its products or to discontinue manufacturing of any of its products without any written announcement and urges customers to ensure that the information at their disposal is valid.

Nordic ID EV15 Configuration Manual

Specifications and Main Features

Frequently Asked Questions

User Manual