NORD BU0320 User Manual
Switching from NORDAC trio SK ….. TR
to SK 200E, SK 300E or terminal box
To switch from NORDAC trio TR to SK 200E or SK300E inverter, it is necessary to
disassemble the TR inverter completely with adapter plate, and the motor terminal block
must be mounted.
The thermoswitch TF (terminals TP1 and TP2) and winding’s ends are to be connected to
the terminal block. The norm motors cables are marked as follows: U (white), V (red), W
(black) and have to be connected in correct way to the terminal block.
V2W2 TP2TP1
U2
U1 V1 W1
The winding’s begins will be connected to terminals U1, V1, W1 and the winding’s ends terminals U2, V2 and W2 (see photo).
For thermoswitch (TF) an additional terminal is available.
According to nameplate or characteristics the motor will be connected in star or delta to the
terminal block.
The assembly of SK 200E is to be done according to BU 0200 assembly instruction.
The assembly of SK 300E is to be done according to BU 0300 assembly instruction.
For motors of size 63, 71, 112 and partly 80 and 100
additional adapters are required for mounting SK 200E resp. SK 300E.
Getriebebau NORD GmbH & Co. KG
Rudolf-Diesel-Straße 1
D-22941 Bargteheide
Fon + 49 (0) 45 32 / 289 – 0
Fax + 49 (0) 45 32 / 289 – 2253
info@nord.com
www.nord.com
Mat.-Nr.: 0607 3202 / 4312 BU 0320 GB
Necessary parts to switch from NORDAC trio SK ….. TRIO TR to SK 200E, SK 300E or to terminal box
Switch set
Switch set from Trio to SK 200E size 132 – 7,5 kW or to terminal box*
Switch set
part – No. Quantity Name Usage
2 Screw M5 x 14 mm Terminal block fastening
1 Terminal block 8xM6 + TF BG 132 with TF
3 Terminal block connector Terminal block, connecting bridge
16 Hex nut M5 Terminal block
275115140
Switch set
part – No. Quantity Name Usage
275115120
Switch set from Trio to SK 200E or to SK 300E size 63 – 100 – 3.0kW or to terminal box *
Switch set
part – No. Quantity Name Usage
275115130
16 Shim M5 Terminal block
4 M6 x 14 mm Fastening Terminal box
1 Sealing Terminal box
Switch set from Trio to SK 200E or to SK 300E size 112 - 4kW or to terminal box *
2 Screw M4 x 12 mm Terminal block fastening
1 Terminal block 8xM5 + TF BG 112 with TF
3 Terminal block connector Terminal block, connecting bridge
16 Hex nut M5 Terminal block
16 Shim M5 Terminal block
4 M5 x 14 mm Fastening interface unit
1 Sealing Adaptor plate / interface unit (not for SK 200E)
2 Screw M4 x 12 mm Terminal block fastening
1 Terminal block 8xM4 + TF BG 63 - 100 with TF
3 Terminal block connector Terminal block, connecting bridge
16 Hex nut M4 Terminal block
16 Shim M4 Terminal block
4 M5 x 14 mm Fastening interface unit
1 Sealing Adaptor plate / interface unit
Adaptor kit
Adaptor kit (spacer set) for BG -80, BG -100 (only SK 200E BG III usage) or
for BG -112 (only SK 200E BGIII or SK 300E usage)
Adaptor kit
part – No. Quantity Name Usage
4 Cylindrical screw M5 x 25 mm Fastening spacer / interface unit SK 300E
275119051
1 Sealing spacer
1 Spacer 80 – 112 / SK 300E BG 112 to KK 80- 112
1 Cable kit SK 300E BG 112 Connectors for M 5 bolts
Adaptor kit for terminal box size 63-71
to KK 80-112 (SK 200E BG I, SK 300E or SK 1x0E usage)
Adaptor kit
part – No. Quantity Name Usage
4 M4 x 16 mm Fastening Adaptor plate (BG 63-71)
275119050
1 Sealing Motor / Adaptor plate (BG 63-71)
1 Adaptor plate BG 63-71 to KK 80-112 (BG 63-71)
* If rebuilding to normal terminal box and not to motor mounted Frequency inverter,
the terminal box is to order separately.
Getriebebau NORD GmbH & Co. KG
Rudolf-Diesel-Straße 1
D-22941 Bargteheide
Fon + 49 (0) 45 32 / 289 – 0
Fax + 49 (0) 45 32 / 289 – 2253
info@nord.com
www.nord.com
Mat.-Nr.: 0607 3202 / 4312 BU 0320 GB
Loading...