Norco BIS-6622 II, BIS-6622 User Manual

BIS-6622
Mini PC
USER' Manual V1.0
Announcement
do not create any commitment of our company. We retained the rights to change it
without prior notice and will not be responsible for any direct, indirect, intentional or
unintentional damage or hidden dangers caused by any improper installation or use.
Before ordering products, please learn about the product performance from the
distributors to see if it is in line with your needs. NORCO is a registered trademark of
Shenzhen NORCO Intelligent Technology CO.,LTD.The ownership of other
trademarks involved in this manual is owned by its respective owners. The contents
of this manual are protected by copyright law. All rights are strictly reserved. Any
form of unauthorized reproduction including but not limited to carbon copy, facsimile
transmission and electronic copy or email is prohibited.
Safety Instructions
1. Before using this product, please read this user’s manual carefully;
2. Before moving the host, please make sure to unplug the AC
power cords out of the sockets;
3. Before you connect or unplug any equipment, please make sure that all
power cords are unplugged in advance;
4. To prevent any unnecessary damage to the products due to frequent power on/off.
Please wait at least 30 seconds to restart the unit.
5. Please use cross screwdriver to operate the unit, a consolidated one for better.
( with magnetism, to avoid leaving screws inside the chassis). Never leave any tools
or parts inside chassis.
6. Before cleaning the host, please disconnect the power supply first.
Pleaes use wet cloth to clean, don’t use liquid or spray cleanser.
7. When the host is operating, please make sure that no liquid poured into
it,which may cause fire or damage.
8. If any exceptions occurred during the operating, please look for help from
professionals.
Content
Chapter 1. Product Introduction ................................................................................................. 1
1.1 Overview ......................................................................................... 错误!未定义书签。
1.2 Features ........................................................................................................................ 1
1.3 Specification .................................................................................................................. 1
1.4 Product Dimension Diagram ......................................................................................... 3
Chapter 2. Hardware Features ................................................................................................... 4
2.1 External Interface Index Map ........................................................................................ 4
2.2Jumper Setting ............................................................................................................... 5
2.2.1 LVDS Voltage Jumper Setting(J2) .................................................................. 5
2.3 Interface Specification ................................................................................................... 5
2.3.1 USB PortsUSB1, USB2, USB3 .................................................................... 5
2.3.2 Audio InterfaceSPKOUT, MIC ...................................................................... 6
2.3.3 Ethernet Port(LAN) ........................................................................................ 6
2.3.4 COM and CAN(COM1,J1) ........................................................................... 6
2.3.5 LVDS Connector ............................................................................................... 7
2.3.6 LVDS Backlight Control(J1) ............................................................................ 7
2.3.7 ExpansionMINIPCIE .................................................................................... 8
3.2.8 Power InterfaceDC 12V ............................................................................... 8
2.4 BIS-6622 Expansion Board(AFC-442V,AFC-450H)Interface ................................ 8
2.4.1 SATA Interface(SATA .................................................................................... 8
2.4.2 VGA Interface(VGA) ....................................................................................... 8
2.4.3 HDMI Interface(HDMI) ................................................................................... 9
2.4.4 USB InterfaceUSB1, USB2, USB3 .............................................................. 9
Chapter 3. Hardware Installation .............................................................................................. 10
3.1 Dismount Host Cover .................................................................................................. 10
3.2 HDD Replacement/Installation .................................................................................... 10
3.3 Power Connection ....................................................................................................... 10
Chapter 4. BIOS Setup.............................................................................................................. 11
4.1 Main Menu .................................................................................................................. 12
4.2 Advanced Menu .......................................................................................................... 13
4.2.1 ACPI Configuration ........................................................................................... 14
4.2.2 CPU Configuration ............................................................................................ 15
4.2.3 Wake On Lan Configuration .............................................................................. 16
4.2.4 USB Configuration ............................................................................................ 17
4.3 Chipset Menu .............................................................................................................. 18
4.3.1 North Bridge ...................................................................................................... 19
4.3.2 South Bridge ..................................................................................................... 20
4.4 Boot Menu ................................................................................................................... 21
4.5 Security Menu ............................................................................................................. 22
4.6 Save&Exit Menu ......................................................................................................... 23
Appendix .................................................................................................................................. 23
Appendix 1: Glossary ........................................................................................................ 23
Chapter 1. Product
Introduction
BIS-6622 Mini PC Based on Intel Atom E6XX Processor
1
Chapter 1 Product Introduction
1.1 Overview
BIS-6622II is a type of embedded barebone system developed around Intel® Atom™ E6xx
0.6G, 1G, 1.3G, 1.6GHz processor. This platform is featured by its ultra low power consumption
and excellent 2D/3D image display performance, supporting hardware decode of MPEG4,
H.263, H.264 and hardware acceleration of MPEG2, MPEG4, VC1, WMV9, H.264.
BIS-6622II supports 1x 1.8” SATA HDD , 5×USB 2.0 and onboard 1 GB DDR2 800 MHz RAM.
The board supports 2×Gigabit Ethernet as well as the WiFi functions with an optional external
WiFi antenna connector. With 12V DC power input, this embedded board can work effectively
under a wide range temperature( -10°C ~ 50°C)
With the great performance, low power consumption and an ultra compact enclosure with the
dimension of only 122mm×122 mm×45 mm , BIS-6622II is the best solution for high graphic
display performance, low power consumption and space restricted applications. This board can
be used in a wide range of applications such as digital signage, in-vehicle infotainment,
multi-media devices, kiosk, surveillance and POS, ect.
1.2 Features
Based on Intel Atom E6XX+EG20T chipset; featured by its high-performance &
low-power-consumption
With super display performance, supporting HD video encoding and decoding
VESA MOUNT ready for easy installation and mounting, supporting desktop and wall
mounting
5×USB, 2×Gigabit Ethernet, 1× RJ 45, WiFi function supported
Ultra compact fanless design with the dimension of only 122 mm×122 mm×45 mm
1.3 Specification
System
Model BIS-6622II BIS-6622IV
BIS-6622 Mini PC Based on Intel Atom E6XX Processor
2
Mainboard BPC-7672+AFC-442V BPC-7672+AFC-450H
Chipset Intel Atom E6XX+EG20T
Processor
Intel Atom E6XX(0.6G,1G,1.3GHz). Power consumption around
2.7W,3.3W,3.3W,3.9W
Memory Onboard 1G
Display
Display
Interface
1xVGA 1xHDMI
Controller Intel Atom E6XX Integrated
Videio
Memory
Dynamic shared 512M system memory as graphic memory
Storage
SSD Optional
HDD
Inbuilt 1x1.8 HDD bay, supporting SATA II
I/0
PS/2 --
COM -- 4
Console 1xRJ45
USB 5x USB2.0( preposition 2*USB)
Audio 1x Mic-in, 1x line-OUT
Ethernet
RTL8211CL+RTL8111D10/100/1000Mbps, 2x RJ45
Expansion
1xMini PCIE,
providing an external WIFI antenna interface
System Control Power On/Off button
LED Indicator Power, HDD LED indicator
Power Supply DC +12V
Cooling
System
Fanless
Operating
System
Windows 7/ Vista/xp/xpe/wince/Linux
Environment & Mechanical
Operating
Temperature
0℃~50
Storage
Temperature
-40℃~60
BIS-6622 Mini PC Based on Intel Atom E6XX Processor
3
Relative
Humidity
5%95%40, non-condensing
Anti-shock
Te st
0.5g rms/5~500Hz/random operating
EMC CE/FCC Class B
Product
Dimension
121.5 mm×121.5 mm×44.5 mm (W×L×H)
Net Weight 500g
Material Aluminum Ally
Surface
Treatment
Sandblasting and Oxidation
Mounting Compliant with VESA MOUNT standard, Desktop and wall monuting supported.
Color Black
1.4 Product Dimension Diagram
Dimension: 120mmx120mmx40mm(LxWxH)
Chapter 2.
Hardware Features
BIS-6622 Mini PC Based on Intel Atom E6XX Processor
4
Chapter 2 Hardware Features
2.1 External Interface Index Map
1BIS-6622 Front View
2BIS-6622II Rear View
3BIS-6622IV Rear View
Loading...
+ 25 hidden pages