Noodoe SB User Manual

BC

Noodoe Service Block

Quick Start Guide

Play the Block

Operating

Please place the block with corresponding icon faced up, the block will
transfer the requested service to the paired smartphone immediately.

Finished

Check

Charging Pairing

Next course

Water Service

Good service

Plug the charging cable into a power outlet,
and insert the micro USB connector into the
port of your Noodoe service block

Scan the barcode above to download and
install Noodoe for Restaurant App on your
phone.

Lunch Noodoe App, then follow the prompts
to pair your phone and Noodoe service
block.

Important
Product Information

www.noodoe.com

Declaration of Conformity

To which this declaration relates, is in conformity
with the following standards and/or other normative
documents:

1. Health (Article 3.1(a) of the R&TTE Directive)

 EN 62311: 2008, EN 62479: 2010

2. Safety (Article 3.1(a) of the R&TTE Directive)

 EN 60950-1:2006/A11:2009+A1:2010+A12:

2011+A2:2013

3. Electromagnetic compatibility (Article3.1(b)
of the R&TTE Directive)

 EN 301 489-1 V1.9.2, EN 301 489-17 V2.2.1
 EN 55022:2010/ AC:2011 Class B, EN 55024:

2010

 EN 61000-3-2:2006/A1:2009/A2:2009,

EN61000-3-3:2008

4. Radio frequency spectrum usage (Article 3.2
of theR&TTE Directive)

 EN 300 328 V1.8.1

5. RoHS Directive (2011/65/EU)

 EN 50581: 2012

We hereby declare that the above named product is
in conformance to all the essential requirements of
the Directives:

R&TTE Directive (1999/5/EC), RoHS Directive
(2011/65/EU)

All the reports of the applied standards under
R&TTE Directive have the Positive Opinion of
Notified Body:

CETECOM, Untertuerkheimer Str. 6–10 66117
Saarbruecken

Identification mark:

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.

Changes or modifications not expressly approved by
the party responsible for compliance could void the
user‘s authority to operate the equipment.

This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation.

This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment

and receiver.

 Connect the equipment into an outlet on a

circuit different from that to which the receiver
is connected.

 Consult the dealer or an experienced radio/TV

technician for help.