No NDA ZUTMBKPED Users Manual

Smart Tire Safety Monitor (Pro Edition)

User Manual

Quick Start
Introduction
App Download & Receiver Connection
Sensor Installation
APP Features & Guide
Receiver Specifications
Sensor Specifications
Important Safety Instructions
Compatibility
No NDA inc. One year Warranty
Regulatory Compliance
Declaration of Conformity

2
3
4
4
6
7
8
9

9
10
11
13

Quick Start

2

Reset Button

Long press: to restart
Short press: to stop

the alarm

White Lights

Bluetooth Status
LEDs on top
Flashing: waiting for
connection

Solid: connected

Green Light

Tire Status LEDs

Solid: normal status
Flashing: abnormal* status
Off: sensor signal lost

Warning Buzzer

No warning when tire
pressure is normal.
Alarms sound when tire
is in abnormal* status.

Reversible USB
Output Port

Charge your mobile
devices or GPS units.

* abnormal: high pressure / low pressure / high temperature /

sensor battery voltage low / no connection / sensor cannot
receive data, corresponding tire has an issue.

Introduction

3

Tire condition is critical for the safety of riders and drivers, so getting a
warning right from your vehicle that your tires have an issue could be a life
saver. nonda’s Smart Tire Safety Monitor features a USB-powered receiver
with 4 internal sensors that transmit data via Bluetooth directly to the ZUS
app. Showing the tire pressure of all 4 tires in real time, the monitor can
quickly detect punctures and/or excess temperature, giving both a visual and
audible warning to alert the driver of possible tire failure. While the receiver
utilizes a USB port, it does come with a USB output port for charging your
mobile devices or GPS unit. As a result, you never lose a USB port.

At a Glance

Pro Edition

Receiver × 1pc
Sensors* × 4 pcs
User Manual & Warranty × 1pc

* Factory paired and labelled to the corresponding tire (battery pre-installed).

4

App Download & Receiver Connection

ENGINE

START

Connect the receiver to a USB car charger. Pair the receiver with your mobile
device before installing the sensors.

Search ‘ZUS’ on the
App Store or Google Play
and download the app on
your mobile phone.

Plug the receiver into

a USB port & start the
engine to power it up.
Make sure you see the
white lights blinking.

Open the ZUS app,
click “add a device” and
place your phone next
to receiver to pair.

Sensor Installation

Please contact your tire professional vendor to install.

* The sensors are labelled with Front Left (FL), Front Right (FR), Rear Left

(RL), and Rear Right (RR). Please install each sensor onto the respective tire.

Jack up the car and de-mount
the tire.

Remove original valve.