NOMA 052-8687-4 Owner's Manual
Gunnar Ceiling Fan
OWNER’S MANUAL
model no. 052-8687-4
Toll-free 1-866-827-4985
IMPORTANT:
For your safety, please read and understand
this manual before installing or operating this product.
Warning: To risk of personal injury, do not bend the blade arms (also referred to as flanges) or the brackets while
balancing the blades or cleaning the fan. Do not insert foreign objects between rotating fan blades.
Warning:
for fan support” with the screws provided with the outlet box.
To reduce the risk of fire, electric shock, and personal injury, mount fan to outletbox marked ”acceptable
Safety Rules – Read and Save These Instructions
before beginning.
2. All wiring must be in accordance with the national and local electrical codes. Electrical installation should
be performed by a qualified licensed electrician.
3. WARNING: To reduce the risk of electric shock or fire, do not use this fan with any solid-state fan-speed
control device. It will permanently damage the electronic circuitry.
4.
CAUTION: To reduce the risk of personal injury, use only the screws provided with the outlet box.
5. The outlet box and support structure must be securely mounted and capable of reliably supporting a
minimum of 35 lb (15.9 kg).
Use only UL listed outlet boxes marked “FOR FAN SUPPORT.”
6. The fan must be mounted with a minimum of 7' (2.13 m) from the trailing edge of the blades to the
floor.
7. Avoid placing objects in the path of the blades.
8. To avoid personal injury or damage to the fan and other items be cautious when working around or
cleaning the fan.
9. Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth will be suitable for
most cleaning.
10. After making electrical connections, spliced conductors should be turned upward and pushed carefully
up into the outlet box. The wires should be spread apart with the grounded conductor and the
equipment-grounding conductor on one side of the outlet box and the ungrounded conductor on the
other side of the outlet box.
11. All set screws must be checked and retightened where necessary
before installation.
Warning:
To reduce the risk of fire, electric shock, or personal injury, mount to outlet box marked "acceptable for
fan support of 35 lb (15.9 kg) or less" and use mounting screws provided with the outlet box. Most outlet boxes
commonly used for the support of light fixtures are not acceptable for fan support and may need to be replaced.
Due to the complexity of this fan, a qualified licensed electrician is strongly recommended.
!
!
!
Attention: This product is equipped with a 190 W limiting device. If lamping exceeds 190 W the light kit will shut
bulbs with the correct wattage, and then turning the light kit back on.
!
IMPORTANT: RETAIN FOR FUTURE REFERENCE, AND READ CAREFULLY.
Toll Free 1-866-827-4985 model no. 052-8687-4
3
1
Required
Helpful
Flathead
screwdriver
Crosshead
screwdriver
Safety glasses
Pliers Step ladder
Wire strippers
Wire cutters
Soft cloth
Electrical tape
To Beging: Tools Needed (not supplied)
To prevent personal injury and damage, ensure
that the hanging location allows the blades a
clearance of 7' (2.13 m) from the floor and 30"
(76 cm) from any wall or obstruction.
This fan can be mounted with a downrod on a regular
(no-slope) or vaulted ceiling. Other installations,
such as flush mount, are not available for this fan.
downrod
installation
flush mount
installation
vaulted ceiling
angle is not to
exceed 15°.
7’
(2.13 m)
30”
(76 cm)
3
2
Unpack your fan and check the contents. You should have the
following items.
1.) Hanger Bracket
2.) Canopy
3.) Canopy Cover
4.) Downrod Stand Cover
5.) Downrod Set (Included Hanger Ball,
Downrod, Hanger Pin & Lock Pin)
6.) Fan Motor Assembly
7.) Blade Brackets (5PCS)
8.) Fan Blades (5PCS)
9.) Switch Box Cover
10.) Switch Box
11.) Light Kit
12.) ST 48 Bulb Max 60 W (3PCS)
13.) Blade Balancing Kit
14.) Installation Instructions
15.) Remote Control
1
17.) Parts pack containing
6.) Receiver
Exploded View Detail
Package Contents:
5
9
1
6
3
4
2
13
X16
14
15
12
10
11
Inst allation
Inst ruction
7
8
Light Kit
Switch Box Cover
Switch Box
ST 48 Bulb Max 60 W
Hanger Bracket
Canopy
Downrod
Downrod Stand Cover
Hanger Ball
Hanger Pin
Blade Holder
Canopy Cover
Collar
Lock Pin
Fan Blade
Fan Motor Assembly
17
Parts pack containing:
2 wood screws with flat washers
2 5/32”-screws with lock washers
1 extra blade bracket screw
with spring washer
16 blade screws with washer
1 “J” hook
1 zip tie
16
Toll Free 1-866-827-4985 model no. 052-8687-4
Loading...