
15 W SEMIFLEXIBLE SOLAR PANEL
30 W SEMIFLEXIBLE SOLAR PANEL
Instruction Manual
model no. 011-2031-8 | model no. 011-2032-6
Toll-free: 1-866-827-4985
IMPORTANT:
Please read this manual carefully
before using this solar panel and save it for reference.

2
model no. 011-2031-8 | model no. 011-2032-6 | contact us: 1-866-827-4985
Table of ContentsFeatures
1. Charges 12 V
batteries
Charges 12 V rechargeable batteries typically found in cars,
boats, RVs, motorcycles, campers, caravans and more.
2. High-eciency
crystalline solar
cells
Produces up to 15 W / 760 mA (model no. 011-2031-8) or
30 W / 1.5 A (model no. 011-2032-6) of power under ideal
conditions.
3. Semi-flexible Curves up to a maximum of 30 degrees.
4. Innovative design Conforms to almost any surface: flat or curved.
5. Fully weatherproof Ideal for outdoor applications.
6. Lightweight and
portable
Panel’s thickness is 2 mm, allowing for easy transportation
and storage.
7. Scratch resistant Highly durable; designed for long-lasting use.
8.. Discharge
protected
Integrated blocking diode protects the battery from reverse
discharge at night.
9. Simple installation
options
Mounts to a variety of surfaces with included grommets and
suction cups.
Features 2
Safety 3
Specifications 4
Know Your Solar Panel 5
Parts Included 6
Installation 6
Troubleshooting 9
Choosing Your Battery 10
Warranty 10

3
Safety
1. Avoid electrical hazards when installing, wiring, operating, and maintaining this
solar panel. This solar panel generates DC electricity when exposed to sunlight or
other light sources.
2. For use in 12 V systems only.
3. Observe proper polarity throughout entire power cable wiring route (see page 8).
4. Work Safely. Do not wear jewellery when working with electrical or mechanical
equipment. Use protective eyewear when working with batteries or drills. Use
extreme caution when on ladders or on a roof.
5. Follow all safety precautions of the battery manufacturer (battery not included).
Some batteries can release flammable hydrogen gas. Do not produce sparks when
working in locations where flammable gases or vapours exist. Shield skin and eyes
from battery acid. Wash thoroughly with water if skin or clothing come in contact
with acid or any corrosive matter which may have accumulated on the battery.
Keep the terminals and casing clean.
6. Use of a charge controller (not included) is always recommended.
7. Do not attempt to charge non-rechargeable or frozen batteries.
READ AND SAVE THESE INSTRUCTIONS!
WARNING:
Solar panels produce electricity. Be aware at all times of the risk of electrical
shock. Do not make any cuts or changes to the included wiring as this may
increase the risk of electrical short-circuits or electric shocks.
!

4
model no. 011-2031-8 | model no. 011-2032-6 | contact us: 1-866-827-4985
15 Watt Specifications30 Watt Specifications
Model 011-2031-8
Maximum Power (Pmax) 15 W
Rated Voltage (Vmp) 19.8 V
Rated Current (Imp) 760 mA
Open Circuit Voltage (Voc) 23.7 V
Short Circuit Current (Isc) 820 mA
Maximum System Voltage 1000 V
Weight 1 lb 5 oz (0.61 kg)
Dimension (L x W x H) 19 x 12 1/4 x 1/16” (48.5 x 31 x 0.2 cm)
Model 011-2032-6
Maximum Power (Pmax) 30 W
Rated Voltage (Vmp) 19.8 V
Rated Current (Imp) 1.5 A
Open Circuit Voltage (Voc) 23.7 V
Short Circuit Current (Isc) 1.62 A
Maximum System Voltage 1000 V
Weight 1 lb 15 oz (0.89 kg)
Dimension (L x W x H) 33 3/4 x 12 1/4 x 1/16” (86 x 31 x 0.2 cm)

5
1. Stainless steel grommets
2. Junction box
3. 8’ (2.4 m) wire
4. Crystalline solar cells
1. Stainless steel grommets
2. Junction box
3. 8’ (2.4 m) wire
4. Crystalline solar cells
KNOW YOUR SOLAR PANEL
Before use of this product, familiarize yourself with all
operating features and safety rules.
1
3
4
Know Your Solar Panel
2
Model no. 011-2031-8
Model no. 011-2032-6
3
1
2
4

6
model no. 011-2031-8 | model no. 011-2032-6 | contact us: 1-866-827-4985
Parts Included
A Charge controller wire adaptor
B 12 V DC plug
C 10’ (3 m) extension wire
D LED voltage tester
E Alligator battery clamps
F Suction cups (4)
C
F
D
A
B
E
The solar panel is at risk of being damaged if bent incorrectly (illustrated below).
Only bend the panel up to a 30 degree outward curve.
Installation