Page 1
CPEi 300 Series
DRAFT
MOTOROLA and the Stylized M Logo are registered
in the US Patent & Trademark Office. All other
product or service names are the property of their
respective owners.
© Motorola, Inc., 2007.
68P09281A65-A
68P09281A65-A
WiMAX
Power
FRONT
Line 2 Jack
Phone
Getting to know
your CPEi 300
Ethernet
Signal Strength
Link/Activity
Indicators
12V 2A
L1
Ethernet
Connector
AC Power
Connector
External
Antenna
Connector
L2
Reset
Switch
BACK
Phone
Line 1 Jack
12V 2A
L2L1
Page 2
Cable Connection Guide
DRAFT
Connect the cables in
numerical order as shown.
L1 L2
12V 2A
12V 2A
L2L1
CPEi 300
Phone
5
Computer
*7
Phone Line
*Optional
steps
Ethernet
Cable
*6
2
4
Power Cord
AC Power
Adapter
1
Procedure to Install the Unit
No computer software applications or drivers are required to complete installation.
3
1
Connect the power cord and power adapter together.
2
Plug the power adapter into the power connector on the back of the unit.
3
Plug the power cord into an AC outlet. The unit will turn on.
4
Plug one end of the Ethernet cable into the Ethernet connector on the back of the unit.
5
Plug the other end of the Ethernet cable into the Ethernet connector of your computer.
*6
Plug one end of the phone line into an activated phone line connector on the back of the
unit. Phone line activation is dependent upon your service contract.
*7
Plug the other end of the phone line into the phone line connector of your telephone.
8
At your computer, open your browser and enter http://mywimax. (with a dot at the end)
into the address field and press the Enter key. A wizard will start up to guide you through
the installation.
9
Follow the directions in the wizard to complete the installation. When using the wizard
for the first time, use the default value provided by the wizard as the password.
Loading...