Nokia T7GT1 Users manual

Download

M APPLICANT: MOTOROLA

Networks FCC ID: IHET7GT1

Users Manual Exhibit

2.5GHz Diversity Access Point

FCC Filing – WAP25400 MOTOwi4™ Diversity Access Point @ 2.5 GHz 1 of 1

Notice

While reasonable efforts have been made to assure the accuracy of this document, Motorola, Inc. assumes no liability resulting from any inaccuracies or omissions in this document, or from use of the information obtained herein. The information in this document has been carefully checked and is believed to be entirely reliable. However , no responsibility is assumed for inaccuracies or omissions. Motorola, Inc. reserves the right to make changes to any products described herein and reserves the right to revise this document and to make changes from time to time in content hereof with no obligation to notify any person of revisions or changes. Motorola, Inc. does not assume any liability arising out of the application or use of any product, software, or circuit described herein; neither does it convey license under its patent rights or the rights of others.

It is possible that this publication may contain references to, or information about Motorola products (machines and programs), programming, or services that are not announced in your country . Such references or information must not be construed to mean that Motorola intends to announce such Motorola products, programming, or services in your country .

Copyrights

This instruction manual, and the Motorola products described in this instruction manual may be, include or describe copyrighted Motorola material, such as computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and its licensors certain exclusive rights for copyrighted material, including the exclusive right to copy , reproduce in any form, distribute and make derivative works of the copyrighted material. Accordingly , any copyrighted material of Motorola and its licensors contained herein or in the Motorola products described in this instruction manual may not be copied, reproduced, distributed, merged or modiﬁed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, as arises by operation of law in the sale of a product.

Usage and Disclosure Restrictions

License Agreements

The software described in this document is the property of Motorola, Inc and its licensors. It is furnished by express license agreement only and may be used only in accordance with the terms of such an agreement.

Copyrighted Materials

Software and documentation are copyrighted materials. Making unauthorized copies is prohibited by law . No part of the software or documentation may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without prior written permission of Motorola, Inc.

High Risk Materials

Components, units, or third -party products used in the product described herein are NOT fault -tolerant and are NOT designed, manufactured, or intended for use as on -line control equipment in the following hazardous environments requiring fail -safe controls: the operation of Nuclear F acilities, Aircraft Navigation or Aircraft Communication Systems, Air Trafﬁc Control, Life Support, or W eapons Systems (High Risk Activities). Motorola and its supplier(s) speciﬁcally disclaim any expressed or implied warranty of ﬁtness for such High Risk Activities.

T rademarks

Motorola and the Stylized M Logo are registered in the US P atent & Trademark Ofﬁce. All

other product or service names are the property of their respective owners.

Draft OCT 2006

T a b l e

o f

C o n t e n t s

Contents

■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

Access Point Hardware Installation

Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

V ersion Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Contacting Motorola . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Questions and comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

24 hour support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Security Advice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

W arnings and cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

F ailure to comply with warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

W arnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

General Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Ground the equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Do not operate in an explosive atmosphere . . . . . . . . . . . . . . . . . . . . . . . . . 9

K eep away from live circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Do not service or adjust alone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Use caution when exposing or handling the CR T . . . . . . . . . . . . . . . . . . . . . . . 10

Do not substitute parts or modify equipment . . . . . . . . . . . . . . . . . . . . . . . . 10

P otentially hazardous procedure warnings . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Devices sensitive to static . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Special handling techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Disposal of Motorola Networks equipment in EU countries . . . . . . . . . . . . . . . . . 12

Disposal of Motorola Networks equipment in non -EU countries . . . . . . . . . . . . . . . 12

Third P arty Computer Software and Trademarks . . . . . . . . . . . . . . . . . . . . . . . . 13

Computer Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Motorola manual set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Ordering manuals and CD -ROMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Manual banner deﬁnitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

■

Chapter 1: Introduction

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2

Manual Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 2

Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 3

Recommended Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 3

Abbreviations and Acronyms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 3

T ools and Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 5

68P09277A59 -5 i OCT 2006 Draft

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 5

T ools and Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 5

Base Control Unit Hardware Identiﬁcation . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 6

RF Head Hardware Identiﬁcation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 6

Access P oint Equipment Identiﬁcation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 8

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 8

B CU Hardware Identiﬁcation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 8

RF Head Hardware Identiﬁcation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 10

Chapter 2: Site Preparation

Site Preparation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2

Site Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2

V eriﬁcation and Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 2

Prepare Site for Equipment Arrival . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3

Equipment Arrival . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3

Procedure to Prepare the Site for the Equipment . . . . . . . . . . . . . . . . . . . . . . 2 - 3

Shipping and Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 4

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 4

How Equipment is Shipped . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 4

How Equipment Arrives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 4

Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 4

Recommended T ools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 4

Unpacking Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 5

Unpacking a Cardboard Container or Shrink W rapped Shipment . . . . . . . . . . . . . . 2 - 7

Chapter 3: Cable Descriptions

Cable Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 2

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 2

Conﬁgurations Supported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 2

Cable Installation Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 2

Cable Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 2

Cable Descriptions and P art Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 3

Cable Lengths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 4

Earth Ground and P ower Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 5

Grounding Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 5

P ower Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 5

DC P ower (RF Head) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 5

Antenna Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 7

Objective . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 7

Cable Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 7

Antenna Cable Pin and Signal Information . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 7

Remote GPS Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 8

Objective . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 8

Cable Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 8

RGPS Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 8

Mounting Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 8

RF GPS Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 10

Objective . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 10

Cable Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 10

Surge Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 10

Mounting Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 10

Ethernet Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 12

Objective . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 12

ii 68P09277A59 -5

Draft OCT 2006

Access P oint Hardw are Installation Contents

Cable Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 12

T ools and Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 12

Fiber Optic Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 13

Objective . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 13

Cable Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 13

Cable Description and P art Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 13

Customer Deﬁned Input/Output Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 14

Objective . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 14

Cable Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 14

Cable Descriptions and P art Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 14

Customer Deﬁned Input and Output Connector Pinouts . . . . . . . . . . . . . . . . . . . 3 - 15

Chapter 4: Access Point Hardware Installation

Installation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 2

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 2

Procedure Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 2

Installation Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 3

GPS Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 4

Connector Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5

Base Control Unit Connector Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5

RF Head Connector Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5

Base Control Unit Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 6

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 6

B CU Compartments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 6

Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 8

Battery Backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 9

Dimension and W eight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 9

Conduit Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 9

T ools and Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 9

B CU Mounting Bracket Assembly Installation . . . . . . . . . . . . . . . . . . . . . . . . 4 - 10

B CU Mounting Bracket Assembly Procedure . . . . . . . . . . . . . . . . . . . . . . . . 4 - 11

Installing the B CU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 12

Diversity Access P oint (DAP) RF Head Assembly Installation . . . . . . . . . . . . . . . . . . 4 - 14

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 14

DAP RF Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 14

Electrical Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 14

Dimensions and W eight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 14

Conduit Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 14

T ools and Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 15

U -Bolt Speciﬁcations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 15

RF Head Assembly Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 16

Ground Cabling Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 20

Objective . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 20

General Grounding Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 20

B CU Grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 20

RF Head Grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 20

DC P ower Grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 20

Antenna Grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 20

RGPS Grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 21

AC P ower Cabling Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 23

Objective . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 23

AC Cable Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 23

T ools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 23

AC P ower Connection Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 23

RF Head DC P ower Cabling Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 25

Objective . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 25

DC Cable Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 25

68P09277A59 -5 iii OCT 2006 Draft

Contents

T ools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 25

DC P ower Cable Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 25

Antenna Cabling Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 27

Objective . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 27

Installing Antenna Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 27

RGPS Cabling Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 28

Objective . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 28

Cable Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 28

T ools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 28

Cable Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 28

RGPS Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 29

Connecting the RGPS Cable to Lightning Arrestor . . . . . . . . . . . . . . . . . . . . . . 4 - 31

RF GPS Cabling Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 34

Objective . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 34

T ools and Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 34

Cable Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 34

Installing RF GPS Antenna and Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 34

Ethernet Cabling Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 37

Objective . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 37

Cable Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 37

Installing Ethernet Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 37

Fiber Optic Cabling Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 38

Objective . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 38

Cable Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 38

Customer Input/Output Cabling Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 39

Objective . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 39

Cable Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 39

Customer Input and Output Connector Pinouts . . . . . . . . . . . . . . . . . . . . . . . 4 - 39

Customer Deﬁned Input/Output Cable Installation . . . . . . . . . . . . . . . . . . . . . . 4 - 39

Chapter 5: Optional Equipment

Optional Band P ass Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 2

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 2

Filter Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 2

Motorola Stability Oscillator (MSO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 3

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 3

Chapter 6: What’s Next and Cleanup

What’s Next . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 2

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 2

Clean Up Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 2

Fill Out Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 2

Optimize the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 2

Site Cleanup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 3

T ools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 3

Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 3

Remove Debris . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 3

Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 3

Installation Completion Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 4

Installation Completion Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 4

Directions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 4

Installation Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 4

Appendix A: Alternate Installation Procedures

Manual RF Head Installation Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . A - 2

iv 68P09277A59 -5

Draft OCT 2006

Contents

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A - 2

DAP RF Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A - 2

Electrical Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A - 2

Dimensions and W eight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A - 2

Conduit Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A - 2

T ools and Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A - 3

U -Bolt Speciﬁcations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A - 3

RF Head Mounting Bracket Assembly Installation . . . . . . . . . . . . . . . . . . . . . . A - 3

RF Head Mounting Bracket Assembly Procedure . . . . . . . . . . . . . . . . . . . . . . A - 4

Installing the RF Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A - 5

68P09277A59 -5 v OCT 2006 Draft

Contents

vi 68P09277A59 -5

Draft OCT 2006

L i s t

o f

F i g u r e s

List of Figures

Figure 1 -1: B CU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 6

Figure 1 -2: RF Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 7

Figure 1 -3: B CU Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 9

Figure 1 -4: DAP RF Head Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 10

Figure 2 -1: Shrink W rapped Shipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 5

Figure 2 -2: Cardboard Shipping Container . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 6

Figure 3 -1: Antenna Cable Detail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 7

Figure 4 -1: B CU Card Cage Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 7

Figure 4 -2: B CU P ower and Customer Interface Compartment . . . . . . . . . . . . . . . . . 4 - 8

Figure 4 -3: B CU P ole Mounting Bracket Assembly . . . . . . . . . . . . . . . . . . . . . . . . 4 - 10

Figure 4 -4: U -Bolt Sizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 16

Figure 4 -5: RF Head Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 17

Figure 4 -6: Typical Outdoor Grounding Diagram . . . . . . . . . . . . . . . . . . . . . . . . 4 - 21

Figure 4 -7: Typical Indoor Grounding Diagram . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 22

Figure 4 -8: B CU AC P ower Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 24

Figure 4 -9: Base Control Unit DC P ower Connection . . . . . . . . . . . . . . . . . . . . . . 4 - 26

Figure 4 -10: Connector Pins Numbering for Cables C and C1 . . . . . . . . . . . . . . . . . . 4 - 28

Figure 4 -11: RGPS Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 30

Figure 4 -12: Installing the Remote GPS Head . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 31

Figure 4 -13: RGPS to Base Control Unit Connection Diagram . . . . . . . . . . . . . . . . . . 4 - 32

Figure 4 -14: RGPS Lightning Arrestor W iring . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 33

Figure 4 -15: RF GPS Installation and Components Diagram . . . . . . . . . . . . . . . . . . . 4 - 36

Figure 4 -16: Ethernet Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 37

Figure 4 -17: Customer Deﬁned Input and Output Connectors . . . . . . . . . . . . . . . . . . 4 - 39

Figure 5 -1: Band P ass Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 2

Figure 5 -2: Filter Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 - 2

Figure A -1: U -Bolt Sizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A - 3

Figure A -2: RF Head Mounting Bracket Assembly . . . . . . . . . . . . . . . . . . . . . . . . A - 4

Figure A -3: RF Head Side Mounting Brackets and Solar Shield . . . . . . . . . . . . . . . . . A - 8

Figure A -4: Antenna to Filter RF Cable Connection Diagram . . . . . . . . . . . . . . . . . . A - 9

■

68P09277A59 -5 vii OCT 2006 Draft

List of Figures

viii 68P09277A59 -5

Draft OCT 2006

L i s t

o f

T a b l e s

List of Tables

T able 1: Manual version history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

T able 1 -1: Abbreviations and Acronyms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 4

T able 1 -2: T ools and Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 5

T able 2 -1: Recommended Unpacking T ools . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 5

T able 3 -1: Cable Description and P art Numbers . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 3

T able 3 -2: Cable Length Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 4

T able 3 -3: RF Head DC P ower Cable Description and P art Numbers . . . . . . . . . . . . . . . 3 - 6

T able 3 -4: Cable Description and P art Numbers . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 7

T able 3 -5: Pin and Signal Information for Antenna Cable . . . . . . . . . . . . . . . . . . . . 3 - 7

T able 3 -6: Cables Needed for RGPS Connections . . . . . . . . . . . . . . . . . . . . . . . . 3 - 8

T able 3 -7: Local GPS Cable Description and P art Numbers . . . . . . . . . . . . . . . . . . . 3 - 10

T able 3 -8: Local GPS Antenna Mounting Considerations . . . . . . . . . . . . . . . . . . . . . 3 - 11

T able 3 -9: Fiber Optic Cable Description and P art Number . . . . . . . . . . . . . . . . . . . 3 - 13

T able 3 -10: Customer Deﬁned I/O Cable Description and P art Numbers . . . . . . . . . . . . . 3 - 14

T able 3 -11: Customer Deﬁned Input Connector Pins 1–4 and 5–8 . . . . . . . . . . . . . . . . 3 - 15

T able 3 -12: Customer Deﬁned Input Connector Pins 9–12 and 13–16 . . . . . . . . . . . . . . 3 - 15

T able 3 -13: Customer Deﬁned Output Connector Pins 1–2 and 3–4 . . . . . . . . . . . . . . . 3 - 16

T able 4 -1: Conduit Types and Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 9

T able 4 -2: Conduit Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 14

T able 4 -3: DAP U -Bolt Sizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 16

T able 4 -4: Pinout for Cables C and C1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 29

T able 6 -1: Hardware Installation Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 5

T able A -1: Conduit Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A - 2

T able A -2: DAP U -Bolt Sizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A - 3

■

68P09277A59 -5 ix OCT 2006 Draft

List of T ables

x 68P09277A59 -5

Draft OCT 2006

L i s t

o f

P r o c e d u r e s

List of Procedures

Procedure 2 -1: Procedure to Prepare the Site for the BTS . . . . . . . . . . . . . . . . . . . . 2 - 3

Procedure 2 -2: Unpacking Equipment from a Cardboard Container or Shrink W rap . . . . . . . 2 - 7

Procedure 2 -3: Procedure to Remove Outdoor Equipment from Container . . . . . . . . . . . . 2 - 7

Procedure 4 -1: Procedure to Install Mounting Bracket Assembly on a P ole . . . . . . . . . . . 4 - 11

Procedure 4 -2: Procedure to Install the B CU . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 12

Procedure 4 -3: Procedure to Install RF Head Assembly . . . . . . . . . . . . . . . . . . . . . 4 - 17

Procedure 4 -4: Procedure to Install AC P ower Cable . . . . . . . . . . . . . . . . . . . . . . . 4 - 23

Procedure 4 -5: Procedure to Install DC P ower Cables . . . . . . . . . . . . . . . . . . . . . . 4 - 25

Procedure 4 -6: Procedure for Installing the RGPS Head and Cabling . . . . . . . . . . . . . . 4 - 29

Procedure 4 -7: Procedure for Installing RF GPS Antenna and Cabling . . . . . . . . . . . . . . 4 - 34

Procedure 4 -8: Procedure to Install Ethernet Cables . . . . . . . . . . . . . . . . . . . . . . 4 - 37

Procedure 4 -9: Procedure to Install Fiber Optic Cables . . . . . . . . . . . . . . . . . . . . . 4 - 38

Procedure 4 -10: Procedure to Install the Customer Deﬁned Input/Output Cables . . . . . . . . 4 - 39

Procedure A -1: Procedure to Install RF Head Main Support Bracket Assembly . . . . . . . . . A - 4

Procedure A -2: Procedure to Install the RF Head . . . . . . . . . . . . . . . . . . . . . . . . A - 5

Procedure A -3: Procedure to Install Optional RF Filter . . . . . . . . . . . . . . . . . . . . . A - 8

■

68P09277A59 -5 xi OCT 2006 Draft

List of Procedures

xii 68P09277A59 -5

Draft OCT 2006

A b o u t

T h i s

M a n u a l

Access Point Hardware Installation

This manual contains general information and procedures for shipping and handling, site preparation, installation, and site clean up of the Access P oint (AP) hardware.

■

68P09277A59 -5 1 OCT 2006 Draft

R evision History

Revision History

The following shows the issue status of this manual since it was ﬁrst released.

Version Information

Table 1 Manual v ersion history

■

Manual

issue

1 5/30/06 2 7/10/06

3 8/14/06

4 9/27/06

Date of issue

DRAFT

DRAFT Update 1

DRAFT Update 2

DRAFT Update 3

10/26/06

DRAFT Update 4

Remarks

General information

Motorola disclaims all liability whatsoever , implied or express, for any risk of damage, loss or reduction in system performance arising directly or indirectly out of the failure of the customer , or anyone acting on the customers behalf , to abide by the instructions, system parameters or recommendations made in this manual.

2 68P09277A59 -5

Draft OCT 2006

R evision History

Purpose

Motorola cellular communications manuals are intended to instruct and assist personnel in the operation, installation and maintenance of the Motorola cellular infrastructure equipment and ancillary devices. It is recommended that all personnel engaged in such activities be properly trained by Motorola.

F ailure to comply with Motorola’ s oper ation, installation and maintenance instructions ma y , in ex ceptional circumstances, lead to serious injury or death.

These manuals are not intended to replace the system and equipment training offered by Motorola, although they can be used to supplement and enhance the knowledge gained through such training.

Cross references

Throughout this manual, references are made to external publications, chapter numbers and section names. The references to external publications are shown in italics. Chapter and section name cross references are emphasized in blue text in electronic versions. These are active links to the references.

This manual is divided into uniquely identiﬁed and numbered chapters that, in turn, are divided into sections. Sections are not numbered, but are individually named at the top of each page, and are listed in the table of contents.

Text conventions

The following conventions are used in the Motorola cellular infrastructure manuals to represent keyboard input text, screen output text and special key sequences.

Input

Characters typed in at the keyboard are shown like this.

Output

Messages, prompts, file listings, directories, utilities, and environmental

variables that appear on the screen are shown like this.

68P09277A59 -5 3 OCT 2006 Draft

R evision History

Special key sequences

Special key sequences are represented as follows:

CTRL-c

ALT-f

¦ Press the pipe symbol key .

CR or RETURN

Press the Control and c keys at the same time.

Press the Alt and f keys at the same time.

Press the Return key .

4 68P09277A59 -5

Draft OCT 2006

Contacting Motorola

Motorola appreciates feedback from the users of our manuals.

Errors

T o report a documentation error , call the Customer Network Resolution Center (CNRC) and provide the following information to enable CNRC to open an Service Request (SR):

• the document type

• the manual title, part number , and revision character

• the page number(s) with the error

• a detailed description of the error and if possible the proposed solution

■

Questions and comments

24 hour support

Send questions and comments regarding user documentation to the email address below: cdma.documentation@motorola.com

If you have problems regarding the operation of your equipment, please contact the Customer Network Resolution Center (CNRC) for immediate assistance. The 24 hour telephone numbers are listed at https://mynetworksupport.motorola.com. Select Customer Network Resolution Center contact information . F or additional CNRC contact information, contact your Motorola account representative.

68P09277A59 -5 5 OCT 2006 Draft

Securit y Advice

Security Advice

Motorola systems and equipment provide conﬁgurable security parameters to be set by the operator based on their particular operating environment. Motorola recommends setting and using these parameters following industry recognized security practices. Security aspects to be considered are protecting the conﬁdentiality , integrity , and availability of information and assets. Assets include the ability to communicate, information about the nature of the communications, and information about the parties involved.

In certain instances Motorola makes speciﬁc recommendations regarding security practices, however the implementation of these recommendations and ﬁnal responsibility for the security of the system lies with the operator of the system.

Please contact the Customer Network Resolution Center (CNRC) for assistance. The 24 hour telephone numbers are listed at https://mynetworksupport.motorola.com/. Select Customer Network Resolution Center contact information , from the menu located to the left of the Login box. Alternatively if you do not have access to CNRC or the internet, contact the Local Motorola Ofﬁce.

■

6 68P09277A59 -5

Draft OCT 2006

W arnings and cautions

Warnings and cautions

The following describes how warnings and cautions are used in this manual and in all manuals of this Motorola manual set.

Failure to comply with warnings

Observe all warnings during all phases of operation, installation and maintenance of the equipment described in the Motorola manuals. F ailure to comply with these warnings,

or with speciﬁc warnings elsewhere in the Motorola manuals, or on the equipment itself , violates safety standards of design, manufacture and intended use of the equipment. Motorola assumes no liability for the customer ’s failure to comply with these requirements.

■

Warnings

Denition of Warning

Example and format

Cautions

A deﬁnition and example follow below:

A warning is used to alert the reader to possible hazards that could cause loss of life, physical injury , or ill health. This includes hazards introduced during maintenance, for example, the use of adhesives and solvents, as well as those inherent in the equipment.

Do not look directly into ber optic cables or data in/out connectors. Laser r adiation can come from either the data in/out connectors or unterminated ber optic cables connected to data in/out connectors.

A deﬁnition and example follow below:

Denition of Caution

A caution means that there is a possibility of damage to systems, software or individual items of equipment within a system. However , this presents no danger to personnel.

68P09277A59 -5 7 OCT 2006 Draft

W arnings and cautions

Example and format

Notes

Denition of Note

Do not use test equipment that is bey ond its due calibr ation date; arr ange for calibr ation to be carried out.

A deﬁnition and example follow below:

A note means that there is a possibility of an undesirable situation or provides additional information to help the reader understand a topic or concept.

Example and format

The UDR version number is conﬁgured at installation time by Motorola personnel and is not accessible by the customer .

8 68P09277A59 -5

Draft OCT 2006

Gener al Safet y

General Safety

Ground the equipment

T o minimize shock hazard, the equipment chassis and enclosure must be connected to an electrical ground. If the equipment is supplied with a three -conductor ac power cable, the power cable must be either plugged into an approved three -contact electrical outlet or used with a three -contact to two -contact adapter . The three -contact to two -contact adapter must have the grounding wire (green) ﬁrmly connected to an electrical ground (safety ground) at the power outlet. The power jack and mating plug of the power cable must meet International Electrotechnical Commission (IEC) safety standards.

■

Refer to

Do not operate in an explosive atmosphere

Do not operate the equipment in the presence of ﬂammable gases or fumes. Operation of any electrical equipment in such an environment constitutes a deﬁnite safety hazard.

Keep away from live circuits

Operating personnel must:

• not remove equipment covers. Only F actory Authorized Service P ersonnel or other qualiﬁed maintenance personnel may remove equipment covers for internal subassembly , or component replacement, or any internal adjustment.

• not replace components with power cable connected. Under certain conditions, dangerous voltages may exist even with the power cable removed.

• always disconnect power and discharge circuits before touching them.

Grounding Guideline for Cellular R adio Installations – 68P81150E62

Do not service or adjust alone

Do not attempt internal service or adjustment, unless another person, capable of rendering ﬁrst aid and resuscitation, is present.

68P09277A59 -5 9 OCT 2006 Draft

Gener al Safet y

Use caution when exposing or handling the CRT

Breakage of the Cathode–R ay Tube (CR T) causes a high -velocity scattering of glass fragments (implosion). T o prevent CR T implosion, avoid rough handling or jarring of the equipment. Only qualiﬁed maintenance personnel wearing approved safety mask and gloves should handle the CR T .

Do not substitute parts or modify equipment

Because of the danger of introducing additional hazards, do not install substitute parts or perform any unauthorized modiﬁcation of equipment. Contact Motorola W arranty and Repair for service and repair to ensure that safety features are maintained.

Potentially hazardous procedure warnings

W arnings, such as the example below , precede potentially hazardous procedures throughout this manual. Instructions contained in the warnings must be followed. Employ all other safety precautions necessary for the operation of the equipment in the operating environment.

P otentially hazardous v oltages, capable of causing death, are present in this equipment. Use extreme caution when handling, testing, and adjusting.

10 68P09277A59 -5

Draft OCT 2006

Devices sensitiv e to static

Devices sensitive to static

Certain metal oxide semiconductor (MOS) devices embody in their design a thin layer of insulation that is susceptible to damage from electrostatic charge. Such a charge applied to the leads of the device could cause irreparable damage.

These charges can be built up on nylon overalls, by friction, by pushing the hands into high insulation packing material or by use of ungrounded soldering irons.

MOS devices are normally despatched from the manufacturers with the leads short circuited together , for example, by metal foil eyelets, wire strapping, or by inserting the leads into conductive plastic foam. Provided the leads are short circuited it is safe to handle the device.

Special handling techniques

In the event of one of these devices having to be replaced, observe the following precautions when handling the replacement:

■

• Always wear a ground strap which must be connected to the electrostatic point on the equipment.

• Leave the short circuit on the leads until the last moment. It may be necessary to replace the conductive foam by a piece of wire to enable the device to be ﬁtted.

• Do not wear outer clothing made of nylon or similar man made material. A cotton overall is preferable.

• If possible work on an grounded metal surface or anti -static mat. W ipe insulated plastic work surfaces with an anti -static cloth before starting the operation.

• All metal tools should be used and when not in use they should be placed on an grounded surface.

• T ake care when removing components connected to electrostatic sensitive devices. These components may be providing protection to the device.

When mounted onto printed circuit boards (PCBs), MOS devices are normally less susceptible to electrostatic damage. However PCBs should be handled with care, preferably by their edges and not by their tracks and pins, they should be transferred directly from their packing to the equipment (or the other way around) and never left exposed on the workbench.

68P09277A59 -5 11 OCT 2006 Draft

Caring for the en vironment

Caring for the environment

The following information is provided to enable regulatory compliance with the European Union (EU) Directive Motorola Networks equipment in EU countries.

Disposal of Motorola Networks equipment in EU countries

Please do not dispose of Motorola Networks equipment in landﬁll sites.

In the EU , Motorola Networks in conjunction with a recycling partner will ensure that equipment is collected and recycled according to the requirements of EU environmental law .

Please contact the Customer Network Resolution Center (CNRC) for assistance. The 24 hour telephone numbers are listed at https://mynetworksupport.motorola.com/. Select Customer Network Resolution Center contact information . Alternatively if you do not have access to CNRC or the internet, contact the Local Motorola Ofﬁce.

2002/96/EC W aste Electrical and Electronic Equipment (WEEE)

when using

■

Disposal of Motorola Networks equipment in non -EU countries

In non -EU countries, dispose of Motorola Networks equipment in accordance with national and regional regulations.

12 68P09277A59 -5

Draft OCT 2006

FCC R equirements

Table 1

Parameter

Maximum Gain 16 dBi

Distance 0.85 cm (33.5 in)

FCC Part 15 Requirements

Part 15.19a(3) - INFORMATION TO USER

MPE Limits

Frequency

2500 MHz

This device complies with P art 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that

may cause undesired operation

Part 15.21 - INFORMATION TO USER

Changes or modications not expressly appro v ed b y Motorola could v oid the user ’ s authorit y to oper ate the equipment.

28 P AR TNO

PRELIMINARY - UNDER DEVELOPMENT MMM YYYY

15.105(b) - INFORMATION TO USER

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to P art 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However , there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment OFF and ON , the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver .

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC R equirements

P AR TNO 29 MMM YYYY PRELIMINARY - UNDER DEVELOPMENT

FCC R equirements

ti_cdma_WiMAXLabelLocation.eps

Label and Location

30 P AR TNO

PRELIMINARY - UNDER DEVELOPMENT MMM YYYY

Third P art y Computer Softw are and T r ademarks

Third Party Computer Software and Trademarks

Computer Software

The Motorola and 3rd P arty supplied Software (SW) products described in this instruction manual may include copyrighted Motorola and other 3rd P arty supplied computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and other 3rd P arty supplied SW certain exclusive rights for copyrighted computer programs, including the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly , any copyrighted Motorola or other 3rd P arty supplied SW computer programs contained in the Motorola products described in this instruction manual may not be copied (reverse engineered) or reproduced in any manner without the express written permission of Motorola or the 3rd P arty SW supplier . Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola or other 3rd P arty supplied SW , except for the normal non -exclusive, royalty free license to use that arises by operation of law in the sale of a product.

■

Vendor Copyright

CMU *

*= Freeware

Trademarks

Java™ T echnology and/or J2ME™ : Java and all other Java -based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the U .S . and other countries.

UNIX® : UNIX is a registered trademark of The Open Group in the United States and other countries.

68P09277A59 -5 13 OCT 2006 Draft

Motorola manual set

The Motorola manual sets provide the information needed to install, operate, and maintain the Motorola equipment.

Ordering manuals and CD -ROMs

W ith internet access available, to view , download, or order manuals (original or revised), visit the Motorola Lifecycles Customer web page at https://mynetworksupport.motorola.com/, or contact your Motorola account representative.

W ithout internet access available, order hard copy manuals or CD -ROMs with your Motorola Local Ofﬁce or Representative.

If Motorola changes the content of a manual after the original printing date, Motorola publishes a new version with the same part number but a different revision character .

■

Manual banner denitions

A banner (oversized text on the bottom of the page, for example, PRELIMINARY ) indicates that some information contained in the manual is not yet approved for general customer use.

14 68P09277A59 -5

Draft OCT 2006

C h a p t e r

Introduction

■

68P09277A59 -5 1 -1 OCT 2006 Draft

Introduction Chapter 1: Introduction

Introduction

Overview

This document provides information pertaining to the hardware and cabling installation for the outdoor version of the Motorola Access P oint (AP) Hardware.

Manual Order

The manual order outlines the content make up starting with Chapter 1 and continuing through Chapter X. A fter hardware installation has been completed, run the A TP for the system by following the procedures deﬁned in Chapter Y of this manual.

■

Chapter 1 Overview - This is a brief outline of the manual. It also provides a list of additional

documents and tools necessary to complete the procedures.

Chapter 2 Site Preparation - This chapter contains the information for site veriﬁcation and

shipping and handling of the hardware.

Chapter 3 Cable Descriptions — This chapter contains general information on the cabling

available for the B CU and RF Head.

Chapter 4 Access P oint Hardware Installation — This chapter contains general information

and procedures for installing the Base Control Unit (B CU) and RF Head.

Chapter 5 Optional Equipment — This chapter contains general information and procedures

for installing optional equipment.

Chapter 6 Access P oint Hardware Operational check — This chapter contains general

information and operational checkout procedures for pre and post installation of the B CU and RF Head.

Chapter 7 What’s Next - This chapter contains general information and procedures for site

clean up and installation checklist.

1 -2 68P09277A59 -5

Draft OCT 2006

Access P oint Hardw are Installation Introduction

Product Description

The Access P oint (AP) hardware is made up of two component assemblies: the B CU and the RF Head. The B CU contains the signal processing and interface hardware, and the RF Head contains the TX and RX components and B CU interface hardware.

Nokia T7GT1 Users manual

Specifications and Main Features

Frequently Asked Questions

User Manual