Nokia T6BN1 User Manual
SCt4812T BTS Optimization/ATP
System Software Release 2.16.0
English
Mar 2001
68P09253A61–1
800/1700/1900 MHz
CDMA
DRAFT
SCt4812T BTS Optimization/ATP
800/1700/1900 MHz
CDMA
English
Mar 2001
68P09253A61–1
SCt4812T BTS Optimization/ATP
System Software Release 2.16.0
English
Mar 2001
68P09253A61–1
800/1700/1900 MHz
CDMA
DRAFT
Notice
While reasonable efforts have been made to assure the accuracy of this document, Motorola, Inc. assumes no liability resulting from any
inaccuracies or omissions in this document, or from use of the information obtained herein. The information in this document has been
carefully checked and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies or omissions. Motorola,
Inc. reserves the right to make changes to any products described herein and reserves the right to revise this document and to make
changes from time to time in content hereof with no obligation to notify any person of revisions or changes. Motorola, Inc. does not
assume any liability arising out of the application or use of any product, software, or circuit described herein; neither does it convey
license under its patent rights or the rights of others.
It is possible that this publication may contain references to, or information about Motorola products (machines and programs),
programming, or services that are not announced in your country. Such references or information must not be construed to mean
that Motorola intends to announce such Motorola products, programming, or services in your country.
Copyrights
This instruction manual, and the Motorola products described in this instruction manual may be, include or describe copyrighted
Motorola material, such as computer programs stored in semiconductor memories or other media. Laws in the United States and
other countries preserve for Motorola certain exclusive rights for copyrighted material, including the exclusive right to copy,
reproduce in any form, distribute and make derivative works of the copyrighted material. Accordingly, any copyrighted Motorola
material contained herein or in the Motorola products described in this instruction manual may not be copied, reproduced,
distributed, merged or modified in any manner without the express written permission of Motorola. Furthermore, the purchase of
Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the
copyrights, patents or patent applications of Motorola, as arises by operation of law in the sale of a product.
Usage and Disclosure Restrictions
License Agreement
The software described in this document is the property of Motorola, Inc. It is furnished by express license agreement only and may
be used only in accordance with the terms of such an agreement.
Copyrighted Materials
Software and documentation are copyrighted materials. Making unauthorized copies is prohibited by law. No part of the software or
documentation may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, without prior written permission of Motorola, Inc.
High Risk Activities
Components, units, or third–party products used in the product described herein are NOT fault–tolerant and are NOT designed,
manufactured, or intended for use as on–line control equipment in the following hazardous environments requiring fail–safe
controls: the operation of Nuclear Facilities, Aircraft Navigation or Aircraft Communication Systems, Air Traffic Control, Life
Support, or W eapons Systems (“High Risk Activities”). Motorola and its supplier(s) specifically disclaim any expressed or implied
warranty of fitness for such High Risk Activities.
Trademarks
and Motorola are registered trademarks of Motorola, Inc.
Product and service names profiled herein are trademarks of Motorola, Inc. Other manufacturers’ products or services profiled
herein may be referred to by trademarks of their respective companies.
Copyright
Copyright 2001 Motorola, Inc.
All Rights Reserved
Printed on
Recyclable Paper
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
REV010598
List of Figures iv. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
List of Tables vi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Product Information x. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FCC Part 15 xi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FCC Part 68 xiii. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General Safety xvii. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Revision History xix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Patent Notification xx. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 1: Introduction
Optimization Manual: Scope and Layout 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Purpose of the Optimization 1-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents
SCt4812T CDMA BTS Optimization/ATP
CDMA 800/1700/1900 MHz
Required Test Equipment 1-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Required Documentation 1-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BTS Equipment Identification 1-13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Frame Module Location & Identification 1-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 2: Preliminary Operations
Preliminary Operations: Overview 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pre–Power–up Tests 2-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Initial Power–up Tests 2-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 3: Optimization/Calibration
Optimization/Calibration – Introduction 3-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Isolate Span Lines/Connect LMF 3-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparing the LMF 3-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using CDMA LMF 3-18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Download the BTS 3-25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CSM System Time/GPS and LFR/HSO Verification 3-32. . . . . . . . . . . . . . . . . . . . .
Test Equipment Set–up 3-43. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mar 2001
Test Set Calibration 3-53. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . continued on next page
SCt4812T CDMA BTS Optimization/ATP
DRAFT
i
Table of Contents – continued
Bay Level Offset Calibration 3-63. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RFDS Setup and Calibration 3-75. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BTS Redundancy/Alarm Testing 3-85. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BTS Alarms Testing 3-97. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 4: Automated Acceptance Test Procedure (ATP)
Automated Acceptance Test Procedures – All–inclusive TX & RX 4-1. . . . . . . . .
TX Output Acceptance Tests: Introduction 4-5. . . . . . . . . . . . . . . . . . . . . . . . . . . .
TX Spectral Purity Transmit Mask Acceptance Test 4-6. . . . . . . . . . . . . . . . . . . . .
TX Waveform Quality (rho) Acceptance Test 4-8. . . . . . . . . . . . . . . . . . . . . . . . . .
TX Pilot Time Offset Acceptance Test 4-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TX Code Domain Power/Noise Floor Acceptance Test 4-10. . . . . . . . . . . . . . . . . . .
RX Frame Error Rate (FER) Acceptance Test 4-12. . . . . . . . . . . . . . . . . . . . . . . . . .
Generate an ATP Report 4-13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 5: Prepare to Leave the Site
Prepare to Leave the Site 5-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 6: Basic Troubleshooting
Basic Troubleshooting Overview 6-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting: Installation 6-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting: Download 6-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting: Calibration 6-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting: Transmit ATP 6-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting: Receive ATP 6-10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting: CSM Checklist 6-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C–CCP Backplane Troubleshooting 6-13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Module Front Panel LED Indicators and Connectors 6-20. . . . . . . . . . . . . . . . . . . . .
Basic Troubleshooting – Span Control Link 6-27. . . . . . . . . . . . . . . . . . . . . . . . . . .
Appendix A: Data Sheets
Optimization (Pre–ATP) Data Sheets A-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Site Serial Number Check List A-18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Appendix B: PN Offset/I & Q Offset Register Programming Information
PN Offset Programming Information B-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Appendix C: FRU Optimization/ATP Test Matrix
FRU Optimization/ATP Test Matrix C-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Appendix D: BBX Gain Set Point vs. BTS Output Considerations
BBX Gain Set Point vs. BTS Output Considerations D-1. . . . . . . . . . . . . . . . . . . .
ii
SCt4812T CDMA BTS Optimization/ATP
DRAFT
. . . continued on next page
Mar 2001
Table of Contents – continued
Appendix E: CDMA Operating Frequency Information
CDMA Operating Frequency Programming Information – North
American PCS Bands E-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CDMA Operating Frequency Programming Information – Korean Bands E-6. . . .
Appendix F: PCS Interface Setup for Manual Testing
Test Equipment Setup F-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Appendix G: VSWR
Transmit & Receive Antenna VSWR G-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Appendix H: Download ROM Code
Download ROM Code H-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Appendix I: In–Service Calibration
Introduction I-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power Delta Calibration I-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
In–Service Calibration I-10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Index Index-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mar 2001
SCt4812T CDMA BTS Optimization/ATP
iii
DRAFT
List of Figures
SCt4812T CDMA BTS Optimization/ATP
CDMA 800/1700/1900 MHz
Figure 1-1: Null Modem Cable Detail 1-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 1-2: +27 V SC 4812T BTS Starter Frame 1-15. . . . . . . . . . . . . . . . . . . . . . .
Figure 1-3: –48 V SC 4812T BTS Starter Frame 1-16. . . . . . . . . . . . . . . . . . . . . . . .
Figure 1-4: +27 V SC 4812T BTS Expansion Frame 1-17. . . . . . . . . . . . . . . . . . . .
Figure 1-5: –48 V SC 4812T BTS Expansion Frame 1-18. . . . . . . . . . . . . . . . . . . .
Figure 1-6: +27 V SC 4812T Starter Frame I/O Plate 1-21. . . . . . . . . . . . . . . . . . . .
Figure 1-7: –48 V SC 4812T Starter Frame I/O Plate 1-22. . . . . . . . . . . . . . . . . . . .
Figure 1-8: +27 V SC 4812T Expansion Frame I/O Plate 1-23. . . . . . . . . . . . . . . . .
Figure 1-9: –48 V SC 4812T Expansion Frame I/O Plate 1-24. . . . . . . . . . . . . . . . .
Figure 1-10: SC 4812T C–CCP Shelf 1-25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 1-11: +27 V SC 4812T LPA Configuration – 4 Carrier with
2:1 Combiners 1-26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 1-12: –48 V SC 4812T LPA Configuration – 4 Carrier, 3–Sector
with 2:1 Combiners 1-27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 1-13: +27 V SC4812T LPA Configuration with Combiners/Filters 1-30. . . .
Figure 1-14: –48 V SC4812T LPA Configuration with Combiners/Filters 1-31. . . .
Figure 1-15: –48 V BTS Power Conversion Shelf 1-32. . . . . . . . . . . . . . . . . . . . . . .
Figure 1-16: CDMA (COBRA) RFDS Layout 1-33. . . . . . . . . . . . . . . . . . . . . . . . .
Figure 2-1: Switch Card 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 2-2: Backplane DIP Switch Settings – SC 4812T 2-3. . . . . . . . . . . . . . . . .
Figure 2-3: +27 V BTS DC Distribution Pre-test 2-7. . . . . . . . . . . . . . . . . . . . . . . .
Figure 2-4: +27 V SC 4812T BTS Starter Frame 2-8. . . . . . . . . . . . . . . . . . . . . . .
Figure 2-5: –48 V BTS DC Distribution Pre-test 2-9. . . . . . . . . . . . . . . . . . . . . . . .
Figure 2-6: –48 V SC 4812T BTS Starter Frame 2-10. . . . . . . . . . . . . . . . . . . . . . . .
Figure 2-7: DC Distribution Pre-test (COBRA RFDS Detail) 2-11. . . . . . . . . . . . . .
Figure 3-1: Span I/O Board T1 Span Isolation 3-5. . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 3-2: LMF Connection Detail 3-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 3-3: LMF Folder Structure 3-13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 3-4: BTS LAN Interconnect Diagram 3-14. . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 3-5: +27 V SC 4812T Starter Frame I/O Plate 3-16. . . . . . . . . . . . . . . . . . . .
. . . continued on next page
iv
SCt4812T CDMA BTS Optimization/ATP
Mar 2001
DRAFT
List of Figures – continued
Figure 3-6: –48 V SC 4812T Starter Frame I/O Plate 3-17. . . . . . . . . . . . . . . . . . . .
Figure 3-7: CDMA LMF Computer Common MMI Connections 3-24. . . . . . . . . . .
Figure 3-8: Null Modem Cable Detail 3-34. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 3-9: CSM MMI terminal connection 3-35. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 3-10: Cable Calibration Test Setup 3-46. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 3-11: TX Calibration Test Setup (CyberTest, HP 8935,
and Advantest) 3-47. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 3-12: TX Calibration Test Setup HP 8921A W/PCS for 1.7/1.9 GHz 3-48. .
Figure 3-13: Optimization/ATP Test Setup Calibration (CyberTest,
HP 8935 and Advantest) 3-49. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 3-14: Optimization/ATP Test Setup HP 8921A 3-50. . . . . . . . . . . . . . . . . . .
Figure 3-15: Typical TX ATP Setup with Directional Coupler (shown
with and without RFDS) 3-51. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 3-16: Typical RX ATP Setup with Directional Coupler (shown
with or without RFDS) 3-52. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 3-17: Calibrating Test Equipment Setup for TX BLO and TX
ATP Tests (using Signal Generator and Spectrum Analyzer) 3-59. . . . . . . . . . . . . . .
Figure 3-18: Calibrating Test Equipment Setup for RX ATP Test (using
Signal Generator and Spectrum Analyzer) 3-60. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 3-19: SC 4812T C–CCP Shelf 3-88. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 3-20: –48 V BTS Power Conversion Shelf 3-88. . . . . . . . . . . . . . . . . . . . . . .
Figure 3-21: +27 V BTS C-CCP Fan Modules 3-90. . . . . . . . . . . . . . . . . . . . . . . . .
Figure 3-22: –48 V BTS C-CCP and Power Conversion Shelf Fan Modules 3-90. .
Figure 3-23: +27 V SC 4812T Starter Frame I/O Plate 3-94. . . . . . . . . . . . . . . . . . .
Figure 3-24: Alarm Connector Location and Connector Pin Numbering 3-98. . . . .
Figure 3-25: AMR Connector Pin Numbering 3-99. . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 4-1: TX Mask Verification Spectrum Analyzer Display 4-7. . . . . . . . . . . . .
Figure 4-2: Code Domain Power and Noise Floor Levels 4-11. . . . . . . . . . . . . . . . .
Figure 5-1: MGLI2/SGLI2 MMI Port Connection 5-4. . . . . . . . . . . . . . . . . . . . . . .
Figure 5-2: Site and Span I/O Boards T1 Span Connections 5-8. . . . . . . . . . . . . . .
Figure 6-1: CSM Front Panel Indicators & Monitor Ports 6-21. . . . . . . . . . . . . . . . .
Figure 6-2: GLI2 Front Panel 6-24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure 6-3: MCC24/8E Front Panel 6-26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure E-1: North American PCS 1900 MHz Frequency
Spectrum (CDMA Allocation) E-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mar 2001
Figure E-2: North American Cellular Telephone System Frequency
Spectrum (CDMA Allocation) E-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure E-3: 1700 MHz PCS Frequency Spectrum (CDMA Allocation) E-6. . . . . .
Figure F-1: Calibrating Test Setup Components F-6. . . . . . . . . . . . . . . . . . . . . . . .
Figure F-2: Cable Calibration using Advantest R3465 F-10. . . . . . . . . . . . . . . . . . .
. . . continued on next page
SCt4812T CDMA BTS Optimization/ATP
DRAFT
v
List of Figures – continued
Figure G-1: Manual VSWR Test Setup Using HP8921 Test Set
(1700/1900 MHz) G-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure G-2: Manual VSWR Test Setup Using HP8921 Test Set (800 MHz) G-4. .
Figure G-3: Manual VSWR Test Setup Using Advantest R3465 G-6. . . . . . . . . . .
Figure I-1: Delta Calibration Setup – HP8921A to HP437B I-4. . . . . . . . . . . . . . .
Figure I-2: Delta Calibration Setup – HP8921A to HP8921A I-4. . . . . . . . . . . . . .
Figure I-3: Delta Calibration Setup – R3561L to HP437B I-6. . . . . . . . . . . . . . . .
Figure I-4: Delta Calibration Setup – R3561L to R3465 I-7. . . . . . . . . . . . . . . . . .
Figure I-5: Delta Calibration Setup – HP8935 to HP437B I-8. . . . . . . . . . . . . . . .
Figure I-6: Delta Calibration Setup – HP8935 to HP8935 I-9. . . . . . . . . . . . . . . . .
Figure I-7: Optimization/ATP Test Setup Using Directional Coupler I-11. . . . . . . .
Figure I-8: Optimization/ATP Test Setup Using RFDS I-12. . . . . . . . . . . . . . . . . . .
vi
SCt4812T CDMA BTS Optimization/ATP
Mar 2001
DRAFT
List of Tables
SCt4812T CDMA BTS Optimization/ATP
CDMA 800/1700/1900 MHz
Table 1-1: C–CCP Shelf/Cage Card/Module Device ID
Numbers (Top Shelf) 1-14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 1-2: C–CCP Shelf/Cage Card/Module Device ID
Numbers (Bottom Shelf) 1-14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 1-3: BTS Sector Configuration 1-28. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 1-4: Sector Configurations 1-29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 2-1: Initial Installation of Boards/Modules 2-2. . . . . . . . . . . . . . . . . . . . . . . .
Table 2-2: DC Power Pre–test (BTS Frame) 2-5. . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 2-3: DC Power Pre-test (RFDS) 2-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 2-4: DC Input Power Cable Guidelines 2-13. . . . . . . . . . . . . . . . . . . . . . . . . .
Table 2-5: Common Power Supply Verification 2-13. . . . . . . . . . . . . . . . . . . . . . . . .
Table 2-6: Initial Power-up (RFDS) 2-14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 2-7: Initial Power–up (BTS) 2-14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-1: T1/E1 Span Isolation 3-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-2: LMF to BTS Connection 3-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-3: LMF Operating System Installation 3-7. . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-4: Copying CBSC CDF Files to the LMF 3-9. . . . . . . . . . . . . . . . . . . . . . .
Table 3-5: Creating a Named Hyperlink Connection for MMI Connection 3-11. . . .
Table 3-6: Pinging the Processors 3-15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-7: BTS GUI Login Procedure 3-20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-8: BTS CLI Login Procedure 3-22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-9: BTS GUI Logout Procedure 3-22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-10: BTS CLI Logout Procedure 3-23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-11: Establishing MMI Communications 3-24. . . . . . . . . . . . . . . . . . . . . . . .
Table 3-12: Download and Enable MGLI2 3-27. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-13: Download Code and Data to Non–MGLI Devices 3-28. . . . . . . . . . . . .
Table 3-14: Select CSM Clock Source 3-29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-15: Enable CSMs 3-30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-16: Enable MCCs 3-31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mar 2001
Table 3-17: Enable Redundant GLIs 3-31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . continued on next page
SCt4812T CDMA BTS Optimization/ATP
DRAFT
vii
List of Tables – continued
Table 3-18: Test Equipment Setup (GPS & LFR/HSO Verification) 3-34. . . . . . . . .
Table 3-19: GPS Initialization/Verification 3-36. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-20: LFR Initialization/Verification 3-40. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-21: HSO Initialization/Verification 3-42. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-22: Test Equipment Setup 3-44. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-23: Selecting Test Equipment Manually in a Serial Connection Tab 3-54. .
Table 3-24: Selecting Test Equipment Using Auto-Detect 3-55. . . . . . . . . . . . . . . . .
Table 3-25: Test Equipment Calibration 3-56. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-26: Cable Calibration 3-57. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-27: Calibrating TX Cables Using Signal Generator and
Spectrum Analyzer 3-58. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-28: Calibrating RX Cables Using a Signal Generator and
Spectrum Analyzer 3-59. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-29: Setting Cable Loss Values 3-61. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-30: Setting TX Coupler Loss Value 3-62. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-31: BLO BTS.cal File Array Assignments 3-65. . . . . . . . . . . . . . . . . . . . . .
Table 3-32: BTS.cal File Array (Per Sector) 3-66. . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-33: Test Equipment Setup (RF Path Calibration) 3-67. . . . . . . . . . . . . . . . .
Table 3-34: BTS TX Path Calibration 3-69. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-35: Download BLO 3-70. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-36: BTS TX Path Audit 3-72. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-37: All Cal/Audit Test 3-73. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-38: Create CAL File 3-74. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-39: RFDS Parameter Settings 3-77. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-40: Definition of Parameters 3-78. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-41: Valid NAM Field Ranges 3-79. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-42: Set Antenna Map Data 3-80. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-43: Set RFDS Configuration Data 3-81. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-44: RFDS Calibration Procedure 3-82. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-45: Program the TSU NAM 3-83. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-46: Test Equipment Setup for Redundancy/Alarm Tests 3-86. . . . . . . . . . . .
Table 3-47: Power Supply/Converter Redundancy (BTS Frame) 3-87. . . . . . . . . . .
viii
Table 3-48: Miscellaneous Alarm Tests 3-89. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-49: BBX Redundancy Alarms 3-91. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-50: CSM, GPS, & LFR/HSO, Redundancy/Alarm Tests 3-92. . . . . . . . . . .
Table 3-51: LPA Redundancy Test 3-95. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-52: MGLI/GLI Redundancy Test (with MM Connection Established) 3-96.
. . . continued on next page
SCt4812T CDMA BTS Optimization/ATP
DRAFT
Mar 2001
List of Tables – continued
Table 3-53: CDI Alarm Input Verification Using the Alarms Test Box 3-99. . . . . . .
Table 3-54: CDI Alarm Input Verification Without the Alarms Test Box 3-102. . . . .
Table 3-55: Pin and Signal Information for Alarm Connectors 3-103. . . . . . . . . . . . .
Table 4-1: ATP Test Procedure 4-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 4-2: Generating an ATP Report 4-13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 5-1: External Test Equipment Removal 5-1. . . . . . . . . . . . . . . . . . . . . . . . . .
Table 5-2: Enabling Devices 5-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 5-3: BTS Span Parameter Configuration 5-3. . . . . . . . . . . . . . . . . . . . . . . . .
Table 5-4: Set BTS Span Parameter Configuration 5-4. . . . . . . . . . . . . . . . . . . . . .
Table 5-5: Backup CAL Data to a Diskette 5-6. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 5-6: LMF Termination and Removal 5-7. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 5-7: Procedures to Copy CAL Files from Diskette to the CBSC 5-7. . . . . . .
Table 5-8: T1/E1 Span/IFM Connections 5-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 6-1: Login Failure Troubleshooting Procedures 6-2. . . . . . . . . . . . . . . . . . . .
Table 6-2: Troubleshooting a Power Meter Communication Failure 6-2. . . . . . . .
Table 6-3: Troubleshooting a Communications Analyzer
Communication Failure 6-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 6-4: Troubleshooting Code Download Failure 6-4. . . . . . . . . . . . . . . . . . . . .
Table 6-5: Troubleshooting Data Download Failure 6-4. . . . . . . . . . . . . . . . . . . . .
Table 6-6: Troubleshooting Device Enable (INS) Failure 6-5. . . . . . . . . . . . . . . . .
Table 6-7: Miscellaneous Failures 6-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 6-8: Troubleshooting BLO Calibration Failure 6-6. . . . . . . . . . . . . . . . . . . .
Table 6-9: Troubleshooting Calibration Audit Failure 6-7. . . . . . . . . . . . . . . . . . . .
Table 6-10: Troubleshooting TX Mask Measurement Failure 6-8. . . . . . . . . . . . . .
Table 6-11: Troubleshooting Rho and Pilot Time Offset
Measurement Failure 6-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 6-12: Troubleshooting Code Domain Power and Noise Floor
Measurement Failure 6-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 6-13: Troubleshooting Carrier Measurement Failure 6-9. . . . . . . . . . . . . . . .
Table 6-14: Troubleshooting Multi-FER Failure 6-10. . . . . . . . . . . . . . . . . . . . . . . .
Table 6-15: No GLI2 Control via LMF (all GLI2s) 6-15. . . . . . . . . . . . . . . . . . . . . .
Table 6-16: No GLI2 Control through Span Line Connection (Both GLI2s) 6-15. .
Mar 2001
Table 6-17: MGLI2 Control Good – No Control over Co–located GLI2 6-15. . . . .
Table 6-18: MGLI2 Control Good – No Control over AMR 6-16. . . . . . . . . . . . . . .
Table 6-19: No BBX2 Control in the Shelf – No Control over
Co–located GLI2s 6-16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 6-20: MGLI2 Control Good – No (or Missing) Span Line Traffic 6-16. . . . . .
Table 6-21: No MCC24 Channel Elements 6-17. . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . continued on next page
SCt4812T CDMA BTS Optimization/ATP
DRAFT
ix
List of Tables – continued
Table 6-22: No DC Input Voltage to Power Supply Module 6-18. . . . . . . . . . . . . . .
Table 6-23: No DC Input Voltage to any C–CCP Shelf Module 6-19. . . . . . . . . . . .
Table 6-24: TX and RX Signal Routing Problems 6-19. . . . . . . . . . . . . . . . . . . . . . .
Table 6-25: Troubleshooting Control Link Failure 6-27. . . . . . . . . . . . . . . . . . . . . . .
Table A-1: Verification of Test Equipment Used A-1. . . . . . . . . . . . . . . . . . . . . . . .
Table A-2: Site Checklist A-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table A-3: Preliminary Operations A-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
T able A-4: Pre–power Checklist A-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
T able A-5: Pre–power Checklist A-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table A-6: GPS Receiver Operation A-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table A-7: LFR Receiver Operation A-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table A-8: LPA IM Reduction A-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
T able A-9: LP A Convergence A-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table A-10: TX BLO Calibration (3–Sector: 1–Carrier, 2–Carrier
and 4–Carrier Non–adjacent Channels) A-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table A-11: TX Bay Level Offset Calibration (3–Sector: 2–Carrier
Adjacent Channels) A-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table A-12: TX Bay Level Offset Calibration (3–Sector: 3 or 4–Carrier
Adjacent Channels) A-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table A-13: TX BLO Calibration (6–Sector: 1–Carrier, 2–Carrier
Non–adjacent Channels) A-14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table A-14: BTS Redundancy/Alarm Tests A-16. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table A-15: TX Antenna VSWR A-16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table A-16: RX Antenna VSWR A-17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table A-17: AMR CDI Alarm Input Verification A-17. . . . . . . . . . . . . . . . . . . . . . . .
Table B-1: PnMask I and PnMask Q Values for PilotPn B-2. . . . . . . . . . . . . . . . . .
Table C-1: When RF Optimization Is required on the BTS C-1. . . . . . . . . . . . . . . .
Table C-2: When to Optimize Inter–frame Cabling C-2. . . . . . . . . . . . . . . . . . . . . .
Table C-3: SC 4812T BTS Optimization and ATP Test Matrix C-4. . . . . . . . . . . . .
Table D-1: BBX2 Gain Set Point vs. Actual BTS Output (in dBm) D-1. . . . . . . . .
Table E-1: 1900 MHz TX and RX Frequency vs. Channel E-2. . . . . . . . . . . . . . . .
Table E-2: 800 MHz TX and RX Frequency vs. Channel E-4. . . . . . . . . . . . . . . . .
Table E-3: 1700 MHz TX and RX Frequency vs. Channel (Korean Bands) E-7. . .
Table F-1: System Connectivity F-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table F-2: Manual Cable Calibration Test Equipment Setup (using the
HP PCS Interface) F-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table F-3: HP PCS Interface Test Equipment Setup for Manual Testing F-7. . . . .
Table F-4: Procedure for Calibrating Test Cable Setup Using
Advantest R3465 F-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . continued on next page
x
SCt4812T CDMA BTS Optimization/ATP
Mar 2001
DRAFT
List of Tables – continued
Table G-1: VSWR Measurement Procedure – HP Test Set G-2. . . . . . . . . . . . . . . .
Table G-2: VSWR Measurement Procedure – Advantest Test Set G-4. . . . . . . . . . .
Table H-1: Download ROM Code H-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table I-1: HP8921A Power Delta Calibration Procedure I-2. . . . . . . . . . . . . . . . . .
Table I-2: Advantest Power Delta Calibration Procedure I-4. . . . . . . . . . . . . . . . . .
Table I-3: HP8935 Power Delta Calibration Procedure I-7. . . . . . . . . . . . . . . . . . .
Table I-4: In–Service Calibration I-13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mar 2001
SCt4812T CDMA BTS Optimization/ATP
xi
DRAFT
Loading...