Nokia RM-10 User Manual

DECLARATION OF CONFORMITY

We, NOKIA CORPORATION declare under our sole responsibility that the product RM-10 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from www.nokia.com/phones/declaration_of_conformity/.

The crossed-out wheele d bin means that within the European Uni on the product must be taken to separate collec tion at the product end-of-life. This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste.

Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.

Nokia, Nokia Connecting People, Xpress-on and Pop-Port are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.

Nokia tune is a sound mark of Nokia Corporation.

Ltd.

Includes RSA BSAFE cryptographic or security protocol software from RSA Security.

Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.

This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information, including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See http://www.mpegla.com.

Nokia operates a policy of ongoing development. Nokia reserves th e right to make changes and improvements to any of the products described in this document without prior notice.

Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice

The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.

EXPORT CONTROLS This device may contain commodities, technology, or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.

9250210 /Issue 1

Contents

For your safety..............................................................7

Contents

About your device....................................................................8

NETWORK SERVICES...................................................................8

Enhancements, batteries, and chargers............................8

Get started...................................................................10

Insert the SIM card and battery.........................................10

Insert a memory card...........................................................11

Charge the battery.................................................................12

Switch on your device..........................................................12

Enter basic settings...............................................................13

Keys and parts.........................................................................14

Keypad lock (keyguard).......................................................15

Connectors...............................................................................16

Antennas...................................................................................16

About the display...................................................................17

Standby modes.......................................................................17

Display indicators..................................................................18

Volume control.......................................................................19

Change writing language....................................................20

Memory.....................................................................................20

CD-ROM......................................................................................21

Nokia support and contact information.........................21

Transfer content between devices...................................21

Your device..................................................................23

Settings.....................................................................................23

Menu..........................................................................................23

Help and tutorial....................................................................23

Scroll and make selections.................................................24

Common actions in several applications........................24

Make calls.....................................................................26

Speed dial.................................................................................26

Answer a call...........................................................................27

Divert calls................................................................................27

Call barring...............................................................................27

Video calls................................................................................28

Log..............................................................................................29

Push to talk..............................................................................29

Net calls.....................................................................................32

Device security .......................................................................33

Contacts........................................................................36

Manage contact groups.......................................................36

Manage default information..............................................37

Copy contacts between SIM and device

memory.....................................................................................37

Select ringing tones for contacts......................................37

Business cards.........................................................................37

Messages......................................................................39

Organize messages...............................................................39

Search for messages.............................................................40

Messaging settings................................................................40

Text messages........................................................................40

Multimedia messages...........................................................42

E-mail messages.....................................................................45

Instant messaging.................................................................51

Special messages...................................................................54

Connectivity.................................................................56

Internet access points..........................................................56

Cable connection....................................................................58

Bluetooth..................................................................................58

SIM access profile...................................................................61

Infrared.....................................................................................62

Data connections...................................................................62

Connection manager............................................................64

Modem......................................................................................65

Mobile VPN ..............................................................................65

Email data roaming...............................................................66

Web................................................................................67

Access points...........................................................................67

Browse the Web.....................................................................67

Bookmarks...............................................................................68

Download items.....................................................................68

End a connection....................................................................68

News feeds and blogs..........................................................69

Web settings...........................................................................69

Services.....................................................................................70

Media applications....................................................71

Gallery........................................................................................71

RealPlayer ................................................................................72

Music player.............................................................................74

Voice recorder.........................................................................75

Flash player..............................................................................75

Camera..........................................................................77

Take a picture.........................................................................77

Record a video clip................................................................77

Insert pictures into messages............................................78

Insert videos into messages...............................................78

Settings.....................................................................................78

Office applications.....................................................79

File manager...........................................................................79

Documents...............................................................................79

Sheet..........................................................................................81

Presentation............................................................................82

Screen export..........................................................................84

Print............................................................................................85

Settings.........................................................................86

Phone settings........................................................................86

Call settings..............................................................................87

Connection settings..............................................................88

Date and time settings.........................................................93

Security settings.....................................................................93

Enhancement settings.........................................................93

Organiser......................................................................94

Calendar....................................................................................94

Notes..........................................................................................95

Calculator..................................................................................95

Converter..................................................................................96

Voice mailbox..........................................................................96

Clock...........................................................................................96

Tools...............................................................................98

Positioning...............................................................................98

Navigator..................................................................................98

Landmarks...............................................................................99

Voice commands....................................................................99

Voice aid.................................................................................100

Sett. wizard...........................................................................100

Application manager..........................................................101

Contents

Nokia Catalogs......................................................................101

Device manager.......................................................103

Remote configuration network service.......................103

Data synchronization.........................................................103

Contents

Personalization........................................................105

Profiles....................................................................................105

Themes...................................................................................106

Nokia original enhancements.............................107

Enhancements......................................................................107

Shortcuts....................................................................108

Battery information................................................110

Li-Ion battery (BL-6C) information.................................110

Care and maintenance...........................................111

Additional safety information.............................112

Operating environment.....................................................112

Medical devices....................................................................112

Vehicles...................................................................................113

Potentially explosive environments..............................113

Emergency calls....................................................................113

CERTIFICATION INFORMATION (SAR)................................114

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.

SWITCH ON SAFELY

Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless devices may be susceptible to interference, which could affect performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the device off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELLING

Do not use the device at a refueling point. Do not use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Do not use the device where blasting is in progress.

USE SENSIBLY

Use only in the normal position as explained in the product documentation. Do not touch the antennas unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect incompatible products.

WATER-RESISTANCE

Your device is not water-resistant. Keep it dry.

BACK-UP COPIES

Remember to make back-up copies or keep a written record of all important information.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.

For your safety

EMERGENCY CALLS

Ensure the phone function of the device is switched on and in service. Press the end key as many times as needed to clear the display and return to the standby mode. Enter the emergency number, then press the call key. Give your location. Do not end the call until

For your safety

given permission to do so.

About your device

The wireless device described in this guide is approved for use on the EGSM900/1800/1900, WCDMA networks. Contact your service provider for more information about networks.

When using the features in this device, obey all laws, and respect privacy and legitimate rights of others.

and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services.

Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your device may also have been specially configured. This configuration may include changes in menu names, menu order and icons. Contact your service provider for more information.

This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as MMS, browsing, e-mail, and content downloading using the browser or over MMS, require network support for these technologies.

Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.

NETWORK SERVICES

To use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize network services. Your service provider may

need to give you additional instructions for their use

Enhancements, batteries, and chargers

Check the model number of any charger before use with this device. This device is intended for use when supplied with power from the LCH-12, ACP-12, and AC-1 chargers.

Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.

For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.

Your device and its enhancements may contain small parts. Keep them out of reach of small children.

For your safety

Get started

Note: Your service provider may have requested that certain features be disabled or not activated in your device. If so, they do not appear on your device menu. Your device may also have been specially configured for your network provider. This configuration may include changes in menu names, menu order and icons. Contact your service provider for more information.

Model number: Nokia E70-1 Hereinafter referred to as Nokia E70.

Insert the SIM card and battery

Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.

1. Always switch the device off, and disconnect the

charger before removing the battery. With the back of the device facing you, press the

cover release button (1), and slide the back cover in the direction of the arrow (2).

2. If the battery is installed, lift the battery from the battery compartment in the direction of the arrow to remove it .

3. To release the SIM card holder, slide it in the direction of the arrow (1), and lift it (2). Insert the SIM card into the SIM card slot (3).

Ensure that the beveled corner of the SIM card is pointing up and the contact area on the card is facing the device. Lower the SIM card holder (4), and slide it until it locks into place (5).

5. Insert the locking catches of the back cover into the

corresponding slots (1), and slide the cover in the direction of the arrow (2).

Get started

4. To insert the battery, align the contacts of the battery with the corresponding connectors on the battery compartment, insert in the direction of the arrow, and gently click the battery into place.

Instead of a SIM card, you may also have a USIM card, which is an enhanced version of the SIM card and is supported by UMTS (network service) mobile phones. Contact your service provider for more information and settings.

Insert a memory card

If you have a memory card, follow the instructions to insert it.

See "Memory," p. 20.

1. Remove the battery cover.

2. Insert the memory card fully into the memory card slot. Ensure that the beveled corner of the memory card is pointing towards the device and the contact area is facing down.

Get started

3. Replace the battery cover.

4. To remove the memory card, press the power key and select Remove mem. card. Remove the battery cover and push the memory card into the device to activate the release mechanism. Then, gently pull the card out of your device.

Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted.

Charge the battery

1. Connect the charger to a wall outlet.

2. Connect the power cord to the bottom of the device. The battery indicator bar starts scrolling on the display. If the battery is completely discharged, it may take a few minutes before the charging indicator is shown. The device can be used while charging.

3. When the battery is fully charged, the bar stops scrolling. Disconnect the charger from the device, then from the outlet.

When the battery charge level is too low for operation, the device switches itself off.

Switch on your device

1. To switch the device on, press the power key.

2. If the device asks for a PIN code (or UPIN code, if you have a USIM card), lock code or security code, enter the code, and select OK.

3. To switch the device off, press the power key.

Tip: When you switch the device on, it may recognize the SIM card provider and configure the correct text message, multimedia message, and GPRS settings automatically. If not, contact your service provider for the correct settings, or use the Sett. wizard application.

The device can be used without the network dependant phone functions when a SIM card is not inserted or when the Offline profile is selected.

The picture shows the location of the power key.

Enter basic settings

When you power on the device for the first time, and when you power on the device after the battery has been empty or removed for a longer period of time, your device asks for the city in which you are located, time, and date. You can change the settings later.

1. Select the city in which you are located from the list and OK. To browse for a city, start to type the name of the city, or scroll to a city. It is important to select the correct city, because scheduled calendar entries that you create can change if the new city is located on a different time zone.

2. Set the time, and select OK.

3. Set the date, and select OK.

You can use your device with the fold closed or open.

1. To open the fold, lift the keypad into the direction of the arrow (1). When you open the fold, you can use the full-size keyboard (2).

Get started

2. The device changes the orientation of the display to

portrait or landscape, depending on whether you use the device with the fold open or closed.

Keys and parts

Fold open

Get started

1 — Keypad light key. Press the key to illuminate your keypad for a period of time.

2 — Power key 3 — Selection keys 4 — Internet key. Press and hold the key in the standby

mode to browse the Web. 5 — Clear (backspace) key 6 — Chr key. Press the Chr key to open a character table

where you can select special characters. 7 — Menu key. Press the Menu key to access the

applications installed in your device. With a long keypress, you can see a list of the active applications and switch between them. In this User Guide, "select

Menu" refers to pressing this key.

8 — Shift key. Press Shift+character key to produce uppercase letters.

9 — Space bar

10 — Call key 11 — Light sensor and earpiece 12 — Joystick. Press the joystick to enter a selection. Use

the joystick to scroll left, right, up, down, or to move around on the screen.

13 — End key Press the end key to reject a call, end active calls and

held calls, close applications, and with a long keypress, end data connections (GPRS, data call).

14 — Space bar 15 — Shift key. Press shift and character key to produce

uppercase letters. 16 — Ctrl key 17 — Enter key

Tip: Press the clear (backspace) key to delete items such as calendar entries and messages. Press the clear (backspace) key to delete characters on the left side of the cursor, or shift +clear (backspace) key to delete characters on the right side of the cursor.

The display changes from portrait to landscape when you open the fold. The application that was active the last time the device was used is shown on the display. When you close the fold, the display changes from landscape to portrait.

Fold closed

6 — Clear key 7 — Menu key. Press the Menu key to access the menu.

In this User Guide, "select Menu" refers to pressing this key.

8 — Internet key. Press and hold the key in the standby mode to browse the Web.

9 — Microphone. Do not cover the microphone with your hand during phone calls.

10 — Pop-Port™ connector for the USB data cable, headset, and loopset

11 — Charger connector 12 — Edit key 13 — Call key 14 — Voice key. 15 — Display 16 — Earpiece 17 — Light sensor

Get started

1 — Power key 2 — Loudspeaker 3 — Infrared port 4 — Left selection key, joystick, and right selection key.

Press either selection key to perform the function shown above it on the display. Press the joystick to enter a selection or access most commonly used functions in different applications. Use the joystick to scroll left, right, up, down, or to move around on the screen. During a call, scroll left or right with the joystick to change volume.

5 — End key

Keypad lock (keyguard)

When the keypad lock is on, calls may be possible to the official emergency number programmed into your device.

Use the keypad lock (keyguard) to prevent the keys on the device from being accidentally pressed.

To lock the keypad in the standby mode, press the left selection key and *. To unlock, press the left selection key and * again.

Get started

Tip: To lock the keypad in the Menu or in an open application, press the power key briefly, and select Lock keypad. To unlock, press the left selection key and *.

You can also lock the device in the standby mode using your lock code. Press the power key, select Lock phone, and enter your lock code. To unlock, press the left selection key and *. Enter your lock code, and press the joystick.

Battery charger connector

Pop-Port connector for headset and other enhancements

Connectors

Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety.

Antennas

Your device has two internal antennas.

Note: As with any other radio transmitting device, do not touch either of the antennas unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Not touching the antenna area during a phone call optimises the antenna performance and the talktime of your device.

The picture shows the normal use of the device at the ear for voice calls.

made other selections, the device is in the active standby mode. In the active standby mode, you can view your service provider and network, different indicators such as indicators for alarms, and applications you want to access fast.

To select applications that you want to access from active standby, select Standby apps. Scroll to the different shortcut settings, and press the joystick. Scroll to the desired application, and press the joystick.

To activate standby, select Menu > Tools > Settings >

Phone > Standby mode > Active standby > Off.

Tip: You can also see the messages in a messaging folder such as inbox or mailbox in the active standby mode. Select Menu >

Messag. > Options > Settings > Other and the

folders in Active standby mode.

Get started

About the display

A small number of missing, discolored, or bright dots may appear on the screen. This is a characteristic of this type of display. Some displays may contain pixels or dots that remain on or off. This is normal, not a fault.

Standby modes

Your device has two different standby modes: standby mode and active standby mode.

Active standby mode

After you have switched on your device and it is ready for use, but you have not entered any characters or

Standby mode

In the standby mode, you can see different information, such as your service provider, time, and different indicators, such as indicators for alarms.

The picture shows a the display in the standby mode.

Get started

To write and send text messages, scroll left.

To open the contacts list, press the joystick.

To change the profile, press the power key briefly, scroll to the profile you want, and press the joystick to activate the profile.

To open Services and connect to the Web, press 0.

To activate the camera, scroll up with the joystick.

To change these shortcuts, select Menu > Tools >

Settings > Phone > Standby mode.

1 — Service provider 2 — Signal strength indicator 3 — Command for left selection key 4 — Command for right selection key 5 — Battery strength indicator

Shortcuts in standby mode

In the standby mode, you can use the following shortcuts. These shortcuts are usually not available in the active standby mode, where the joystick is used for normal scrolling.

To view the most recently dialed numbers , press the call key. Scroll to a number or name, and press the call key again to call the number.

To call your voice mailbox (network service), press and hold 1.

To view calendar information, scroll right.

Display indicators

The device is being used in a GSM network. The bar

next to the icon indicates the signal strength of the network at your current location. The higher the bar, the stronger the signal.

The device is being used in a UMTS network (network service). The bar next to the icon indicates the signal strength of the network at your current location. The higher the bar, the stronger the signal.

The battery charge level. The higher the bar, the

stronger the charge in the battery.

You have one or more unread messages in the

Inbox folder in Messag..

You have received new e-mail in the remote

mailbox.

You have one or more missed phone calls.

An alarm is active.

You have selected the silent profile, and the device

does not ring for an incoming call or message.

Bluetooth is activated.

An infrared connection is active. If the indicator

blinks, your device is trying to connect to the other device, or the connection has been lost.

A GPRS or EGPRS packe t data connection is available.

A GPRS or EGPRS packet data connection is active.

A GPRS or EGPRS packet data connection is on hold.

A UMTS packet data connection is available.

A UMTS packet data connection is active.

A UMTS packet data connection is on hold.

You have set the device to scan for wireless LANs,

and a wireless LAN is available.

A wireless LAN connection is active in a network

that does not have encryption.

A wireless LAN connection is active in a network

that has encryption.

Your device is connected to a PC with a USB data

cable.

A data call is active.

IP passthrough is active.

and Indicate the phone line that you have selected,

if you have subscribed to two phone lines (network service).

All calls are forwarded to another number.

A headset is connected to the device.

The connection to a headset with Bluetooth

connectivity has been lost.

A hands-free car kit is connected to the device.

A loopset is connected to the device.

A Text phone is connected to the device.

Your device is synchronizing.

You have an ongoing push to talk connection.

Volume control

Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

To adjust the volume during a call, scroll left or right.

To adjust the volume when using the loudspeaker, scroll left or right.

Get started

Change writing language

If you are writing text, for example a note or a message, you can change the writing language. When you are writing and press a key several times to reach a specific character, changing the writing language gives you

Get started

access to a different characters. For example, if you are writing text using a non-Latin

alphabet and want to write Latin characters for Web addresses, select Options > Writing language and the writing language to have access to a language that uses Latin characters.

If you are writing with the fold open, press Shift+Chr to change the language.

Memory

There are two types of memory into which you can save data or install applications: device memory and removable memory.

Select Menu > Options > Memory details. You can see how much memory is currently in use, how

much free memory remains, and how much memory is consumed by each data type. For example, you can see how much memory your e-mail messages, text documents, or calendar appointments consume.

Tip: To ensure that you have adequate memory, you should regularly delete or transfer data to a memory card or PC.

Memory card

Use only compatible miniSD cards with this device. Other memory cards, such as MultiMediaCards, reducedsize MultiMediaCards or full-size SD cards, do not fit in the memory card slot and are not compatible with this device. Using an incompatible memory card may damage the memory card as well as the device, and data stored on the incompatible card may be corrupted.

Your Nokia device only supports the FAT16 file system for memory cards. If you use a memory card from another device or if you want to ensure compatibility of the memory card with your Nokia device, you may need to format the memory card with your Nokia device. However, all data in the memory card is permanently deleted if you format the memory card.

It is recommended to back up device memory regularly to the memory card. The information can be restored to your device later. To back up information fro m device memory to a memory card, select Menu > Tools >

Memory card > Options > Backup phone mem. To

restore information from the memory card to the device memory, select Menu > Tools > Memory card >

Options > Restore from card.

To remove the memory card, press the power key and select Remove mem. card.

Do not remove the memory card when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted.

If you cannot use a memory card in your device, you may have the wrong type of memory card, the card may

not be formatted for your device, or the card has a corrupted file system.

MiniSD

This device uses a mini Secure Digital (SD) card.

Check the compatibility of a miniSD with its manufacturer or provider. Use only compatible miniSD cards with this device. Other memory cards, such as MultiMediaCards (MMC) or full-size SD cards, do not fit in the miniSD card slot and are not compatible with this device. Using an incompatible memory card may damage the memory card as well as the device, and data stored on the incompatible card may be cor rupted. Keep all memory cards out of the reach of small children.

CD-ROM

The sales package CD-ROM is compatible with Windows 98SE, Windows ME, Windows 2000, and Windows XP.

You can install Nokia PC Suite from the CD-ROM. Nokia PC Suite can be used only with Windows 2000 and Windows XP.

Nokia support and contact information

Check www.nokia.com/suppor t or your local Nokia Web site for the latest version of this guide, additional

information, downloads, and services related to your Nokia product.

On the Web site, you can get information on the use of Nokia products and services. If you need to contact customer service, check the list of local Nokia contact centers at www.nokia.com/customerservice.

For maintenance services, check your nearest Nokia service center at www.nokia.com/repair.

Transfer content between devices

You can transfer content, such as contacts, from a compatible Nokia device to your Nokia E70 using Bluetooth connectivity or infrared. The type of content that can be transferred depends on the phone model. If the other device supports synchronization, you can also synchronize data between the other device and your Nokia E70.

Transfer data from another device

Tip: If you transfer data from your previous phone, the phone may require you to insert the SIM card. Your Nokia E70 does not need a SIM card when transferring data.

To start transferring data from a compatible device, select Menu > Tools > Transfer.

1. In the information view, select Continue.

2. Select Via Bluetooth. Both devices must support the

selected connection type.

Get started

3. Activate Bluetooth in your other device, and select

Continue in your Nokia E70 to start searching for

devices with active Bluetooth connectivity.

4. Select Stop in your Nokia E70 after it has found your other device.

Get started

5. Select your other device from the list. You are asked to enter a passcode (1 to 16 digits) on your Nokia E70. The passcode is used only once to confirm this connection.

6. Enter the code on your Nokia E70, and select OK. Enter the passcode on your other device, and select

OK. The devices are now paired. See "Pair

devices," p. 60. For some phone models, the Transfer data

application is sent to your other device as a message. To install Transfer data on your other device, open the message, and follow the instructions on the display.

7. From your Nokia E70, select the content you want to transfer from your other device, and OK.

Infrared connectivity

1. In the information view, select Continue.

2. Select Via infrared. Both devices must support the selected connection type.

3. Connect the two devices. See "Infrared," p. 62.

4. From your Nokia E70, select the content you want to transfer from your other device, and OK.

Content is copied from the memory of the other device to the corresponding location in your device. Copying time depends on the amount of data to be transferred.

You can also cancel and continue later.

The necessary steps for data transfer may vary depending on your device, and whether you have interrupted data transfer earlier. The items that you can transfer vary depending on the other device.

Synchronize data with another device

If you have previously transferred data to your Nokia E70, and your other device supports synchronization, you can use Transfer to keep the data of the two devices up to date.

1. Select Phones, and press the joystick.

2. Scroll to the device from which you transferred data, and press the joystick.

3. Select Synchronise, and press the joystick. The devices start synchronizing using the same connection type that you selected when you originally transferred data. Only the data that you originally selected for data transfer is synchronized.

To modify the data transfer and synchronization settings, select Synchronise, scroll to a device, press the joystick, and select Edit.

Your device

Settings

When you switch the device on, it may recognize the SIM card provider and configure the correct text message, multimedia message, and GPRS settings automatically. You may also receive the settings as a special text message from your service provider.

The Menu is a starting point from which you can open all applications in the device or on a memory card. The

Menu contains applications and folders, which are

groups of similar applications. Use the joystick to scroll up and down on the screen.

Applications that you install are saved in the Installat. folder by default.

To open an application, scroll to it, and press the joystick.

To view the applications in a list, select Options >

Change view > List. To return back to the grid view,

select Options > Change view > Grid.

To view the memory consumption of different applications and data stored on the device or memory card and to check the amount of free memory, select

Options > Memory details and the memory.

To rearrange the folder, scroll to the application you want to move, and select Options > Move. A check mark

is placed beside the application. Scroll to a new location, and select OK.

To move an application to a different folder, scroll to the application you want to move to another folder, and select Options > Move to folder, the new folder, and

OK.

To download applications from the Web, select

Options > App. downloads.

To create a new folder, select Options > New folder. You cannot create folders inside folders.

To rename a new folder, select Options > Rename.

Tip: To switch between several open applications, press and hold the menu key. The application-switching window opens and displays the open applications. Scroll to an application, and press the joystick to switch to it.

Help and tutorial

You can find answers to your questions while using the device even with no user guide present, because your device includes both a task-specific help and a tutorial.

Tip: Task-specific means you can access instructions from Options lists.

Your device

Device help

You can access the device help from an open application or from the Menu. When you have an application open, select Options > Help to read instructions for the current view.

Your device

To open help from Menu, select Help > Help. In Help, you can select categories for which you want to see instructions. Scroll to a category, such as Messaging, and press the joystick to see what instructions (help topics) are available. While you are reading the topic, scroll left or right to see the other topics in that category.

When you are reading the instructions, press and hold the menu key to switch between help and the application that is open in the background.

Tutorial

The tutorial provides you information about your device and shows you how to use it.

To access the tutorial in the menu, select Menu > Help, open Tutorial and the section you want to view.

Scroll and make selections

Use the joystick to move and make selections. With the joystick, you can move up, down, left and right in the

Menu or in different applications or lists. You can also

press the joystick to open applications, files, or edit settings.

To select text, press and hold the edit key, and scroll left or right until you have selected the text.

To select different items, such as messages, files, or contacts, scroll up, down, left or right to highlight the item you want to select. Select Options > Mark/

Unmark > Mark to select one item or Options > Mark/ Unmark > Mark all to select all items.

Tip: To select almost all items, first select

Options > Mark/Unmark > Mark all, then select

the items you do not want, and Options > Mark/

Unmark > Unmark.

To select an object (for example, an attachment in a document) scroll to the object so that square markers appear on each side of the object.

Common actions in several applications

You can find the following actions in several applications:

To switch between open applications, press and hold the menu key to see a list of open applications. Select an application.

To change the profile or switch off or lock the device, press the power key briefly.

To save a file, select Options > Save. There are different save options depending on the application you use.

To send a file, select Options > Send. You can send a file in an e-mail or multimedia message, or using infrared or Bluetooth.

To print to a compatible printer, select Options > Print. You can preview items that you want to print, or edit the way printed pages look. Before you can print, you must define a compatible printer to your device. See "Print," p. 85.

To copy, press the edit key, and select the text with the joystick. Press and hold the edit key, and select Copy. To paste, scroll to where you want to paste the text, press and hold the edit key, and select Paste. This method may not work in applications such as Documents that have their own copy and paste commands.

To delete a file, press the clear key, or select Options >

Delete.

To insert characters such as question marks or parentheses to text, press *.

Your device

Make calls

When the device is locked, calls still may be possible to the official emergency number programmed into your

Make calls

device.

In the offline profile, you may need to enter the lock code and change the device to a calling profile before making any call, including a call to an emergency number.

To make and receive calls, the device must be switched on, the device must have a valid SIM card installed, and you must be located in a service area of the cellular network. The GPRS connection is put on hold during voice calls unless the network supports dual transfer mode or you have a USIM card and are within the coverage of a UMTS network.

Enter the phone number, including the area code, and press the call key. If you enter an incorrect character, press the clear key.

Tip: For international calls, press the * key twice to add the + character that replaces the international access code, and enter the country code, area code (omit the leading 0, if necessary), and phone number.

To end the call or cancel the call attempt, press the end key.

To make a call using the saved contacts, press

Contacts in standby mode. Enter the first letters of the

name, scroll to the name, and press the call key. See

"Contacts," p. 36.

Press the call key to view up to 20 num be rs th at y ou la st called or attempted to call. Scroll to the desired number or name, and press the call key to dial the number.See "Log," p. 29.

To adjust the volume of an active call, scroll left or right with the joystick.

When you open the fold of the device during a call, the loudspeaker is activated.

To call your voice mailbox (network service) in standby mode, press and hold 1, or press 1 then the call key.

Speed dial

Speed dialing allows you to make a call by pressing and holding a number key.

Before using speed dialing, select Menu > Tools >

Settings > Call > Speed dialling > On.

To assign a number key to a phone number, select

Menu > Tools > Speed dial. Scroll to the number key (2

- 9) on the screen, and select Options > Assign. Select

the desired number from the Contacts directory.

To delete the phone number assigned to a number key, scroll to the speed dialing key, and select Options >

Remove.

To modify a phone number assigned to a number key, scroll to the speed dialing key, and select Options >

Change.

Answer a call

Note: The actual invoice for calls and services from your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth.

To answer a call, press the call key.

To reject the call, press the end key.

To mute a ringing tone instead of answering a call, select Silence.

To answer a new call during a call when the Call

waiting function is activated, press the call key. The first

call is put on hold. To end the active call, press the end key.

Divert calls

Select Menu > Tools > Settings > Call divert. Divert incoming calls to your voice mailbox or to

another phone number. For details, contact your service provider.

1. Select a call type from the following:

• Voice calls — Incoming voice calls.

• Data and video calls — Incoming data and video

calls.

• Fax calls — Incoming fax calls.

2. Select one of the following call diverting options:

• All voice calls, All data and vid. calls, or All fax

calls. — Divert all incoming voice, data and video,

or fax calls.

• If busy — Divert incoming calls when you have an active call.

• If not answered — Divert incoming calls after your device rings for a specified period of time. Define the time you let the device ring before diverting the call in the Delay time: field.

• If out of reach — Divert calls when the device is switched off or out of network coverage.

• If not available — Activate the last three settings at the same time. This option diverts calls if your device is busy, not answered, or out of reach.

3. Select Activate.

To check the current diverting status, scroll to the diverting option, and select Options > Check status.

To stop diverting voice calls, scroll to the diverting option, and select Options > Cancel.

Call barring

Call barring and call diverting cannot be active at the same time.

When calls are barred, calls still may be possible to certain official emergency numbers.

Select Menu > Tools > Settings > Call barring. You can bar the calls that can be made or received with

the device (network service). To change the settings, you need the barring password from your service provider. Call barring affects all calls, including data calls.

Make calls

To bar calls, select Cellular call barring and select from the following options:

• Outgoing calls — Prevent making voice calls with your device.

• Incoming calls — Bar incoming calls.

Make calls

• International calls — Prevent calling to foreign countries or regions.

• Incoming if abroad — Bar incoming calls when outside your home country.

• Intern. except home — Prevent calls to foreign countries or regions, but to allow calls to your home country.

To check the status of voice call barrings, scroll to the barring option, and select Options > Check status.

To stop all voice call barrings, scroll to a barring option, and select Options > Cancel all barrings.

Net call barring

To bar net calls, select Menu > Tools > Settings > Call

barring > Internet call barring.

To reject net calls from anonymous callers, select

Anonymous calls > On.

Video calls

To be able to make a video call, you need to be in the coverage of a UMTS network. For availability of and subscription to video call services, contact your network operator or service provider. While talking, you can see a real-time, two-way video between you and the

recipient of the call, if the recipient has a compatible

mobile phone. The video image captured by the camera in your device is shown to the video call recipient. A video call can only be made between two parties.

Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

To make a video call, enter the phone number or select the recipient of the call from Contacts, and select

Options > Call > Video call. When the video call starts,

the camera of your device is activated. If the camera is already in use, video sending is disabled. If the recipient of the call does not want to send a video back to you, a still image is shown instead. You can define the still image in Tools > Settings > Call settings > Image in

video call. You cannot convert the video call to a normal

voice call. During the call, select Options and from the following:

• Disable — Select to disable Sending audio, Sending

video or Sending audio & video.

• Activate loudsp. — Select to use the loudspeaker for

receiving audio.

• Activate handset — Mute the loudspeaker and use

the handset.

• End active call — End the active call.

• Open active standby — Open the active standby

view.

• Change image order — Swap the places of images.

• Zoom in or Zoom out — Zoom the image on the

display.

Log

Select Menu > Log. In the Log, you can view information about the

communication history of the device.

To view the logs for recent voice calls, their approximate duration, and packed data connections, select Recent calls, Call duration, or Packet data; and press the joystick.

To sort the events by type or direction, scroll right to open the general log, and select Options > Filter. Scroll to a filter type, and press the joystick. Select the type or direction, and press the joystick.

To set the time how long all communication events are held in the log, select Options > Settings > Log

duration, an option, and OK.

To clear missed and received calls and dialed numbers, select Recent calls > Options > Clear recent calls.

Push to talk

Select Menu > Connect. > PTT. Push to talk (PTT) (network service) provides direct

voice communication connected with the push of a key. With push to talk, you can use your device as you would use a walkie-talkie.

You can use push to talk to have a conversation with one person or with a group of people, or to join a channel. A channel is like a chat room: you can call the channel to see if anyone is online. The channel call does

not alert the other participants; the participants just join the channel and start speaking with each other.

In push to talk communication, one person talks while the other participants listen through the built-in loudspeaker. Participants take turns responding to each other. Because only one participant can talk at a time, the maximum duration of a speech turn is limited. For details of the speech turn duration for y our network, contact your network operator or service provider.

Remember to hold the device in front of you during a push to talk call so you can see the display. Speak towards the microphone, and do not cover the loudspeaker with your hands.

Phone calls always take priority over push to talk. Before you can use push to talk, you must define the

push to talk access point and push to talk settings. You may receive the settings in a special text message from the service provider that offers the push to talk service.

User settings

Select Options > Settings > User settings. Define the following:

• Incoming PTT calls — Select Notify if you want to see a notification of incoming calls. Select Auto-accept if you want push to talk calls to be answered automatically. Select Not allowed if you want push to talk calls to be rejected automatically.

• PTT call alert tone — Select Set by profile if you want the incoming call alert setting for push to talk to follow your profile settings. If your profile is silent, you are not available to others using push to talk, except for callback requests.

Make calls

• Callback request tone — Define the ringing tone for callback requests.

• Application start-up — Select if you want to log in to the push to talk service when you switch on your device.

• Default nickname — Enter your default nickname

Make calls

(20 characters maximum) that is displayed to other users.

• Show my PTT address — Define if you want callers to see your push to talk address. You can let all callers see the address, show the address only to one-toone callers or channel participants, or hide the address from all callers.

• Show my login status — Define whether your login to the push to talk server is shown or hidden from other users.

Connection settings

Select Options > Settings > Connection settings. Define the following:

• Domain — Enter the domain name obtained from your service provider.

• Access point name — Select the push to talk access point.

• Server address — Enter the IP address or domain name of the push to talk server obtained from your service provider.

• User name — Enter your user name obtained from your service provider.

• Password — Enter a password, if required, to log into the push to talk service. The password is provided by the service provider.

If you have set Application start-up on in User

settings, push to talk automatically logs in to the service

when started. If not, you must log in manually.

To log in to a push to talk service, select Options >

Settings > Connection settings, and enter your User name, Password, Domain, Server address, and Access point name. Select Options > Switch PTT on.

When the Ringing type setting of your device is set to

Beep once or Silent, or there is an ongoing phone call,

you cannot make or receive push to talk calls.

Push to talk calls

Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

Select Options > PTT contacts.

To make a push to talk call, select one or several contacts from the list, and press the voice key. Remember to hold the device in front of you during a push to talk call so you can see the display. The display informs you when it is your turn to speak. Speak towards the microphone, and do not cover the loudspeaker with your hands. Press and hold the voice key the entire time you are talking. When you have finished talking, release the key.

To end the push to talk call, press the end key.

Answer or reject a call, When you receive a push to talk call, press the call key to answer the call or the end key to dismiss the call.

Callback requests

To send a callback request, select Options > PTT

contacts, scroll to the desired contact, and select Options > Send callback request.

To answer a callback request, select Show to open the callback request. To make a push to talk call to the sender, press the voice key.

Contacts view

To view, add, modify, delete, or call contacts, select

Options > PTT contacts. A list of names from your device Contacts application is displayed with information

about their login status.

To call a selected contact, select Options > Talk 1 to 1. To make a group call, select Options > Make PTT group

call.

To send the contact a request to call you, select

Options > Send callback request.

Create a channel

A channel is like a chat room: you can call the channel to see if anyone is online. The channel call does not alert the other participants; the participants just join the channel and start speaking with each other.

To create a channel, select Options > New channel >

Create new.

Select Options and define the following:

• Channel name — Write the channel name.

• Channel privacy — Select Private or Public.

• Nickname in channel — Enter your nickname (20

characters maximum) that is displayed to other

users.

• Channel thumbnail — Insert a pictu re that describes the channel.

To delete a channel, press the clear key. When you log in to push to talk, push to talk

automatically connects to the channels that were active when the application was last closed.

To register a channel to the push to talk service, select

Options > Register.

To edit the channel details, select Options > Edit.

Join a channel

To join a channel, select Options > PTT channels. Select the channel you want to talk to, and press t he voice key. Remember to hold the device in front of you during a push to talk call so you can see the display. The display informs you when it is your turn to speak. Speak towards the microphone, and do not cover the loudspeaker with your hands. Press and hold the voice key the entire time you are talking. When you have finished talking, release the key.

Make calls

To switch between channels during multiple calls, select Swap. The active channel is highlighted.

To view the currently active participants in the channel, select Options > Active members.

To invite a participant to a channel, select Options >

Make calls

Send invitation.

Push to talk log

To open the push to talk log, select Options > PTT log. The log shows the date, time, duration, and other details of your push to talk calls.

Exit push to talk

Select Options > Exit. Select Yes to log out and close the service. Press No if you want to keep the application active on the background.

Net calls

Your device supports voice calls over the Internet (Internet calls). Your device attempts emergency calls primarily over cellular networks. If an emergency call using cellular networks is not successful, then your device attempts an emergency call through your Internet call provider. Due to the established nature of cellular telephony, you should use cellular networks for emergency calls, if possible. If you have cellular network coverage available, please make sure that your cellular phone is switched on and ready to make calls before you attempt an emergency call. The capability for an

emergency call using Internet telephony depends on the availability of a WLAN network and your Internet call provider's implementation of emergency call capabilities. Contact your Internet call provider to check the Internet telephony emergency call capability

VoIP (voice over Internet protocol) technology is a set of protocols that facilitate phone calls over an IP network, such as the Internet. VoIP phone calls can be established between computers, between mobile phones, and between a VoIP device and a traditional telephone. To make or receive a VoIP call, your device must be within WLAN coverage, for example.

Before you can make net calls, you need to create a net telephone profile. When the profile is ready, you can make a net call from all applications where you can create a regular voice call. To mak e a net call in st andb y mode to an address that does not start with a digit, press any number key, then press # for a few seconds to clear the display and to switch the device from number mode to letter mode. Write the address and press the call key. If you have the fold open, and you have created a net telephone profile, write the address and press the call key.

You must define session initiation protocols (SIP) settings in Menu > Tools > Settings > Connection > SIP

settings and VoIP settings in Menu > Tools > Settings > Call and Menu > Tools > Settings > Call > Connection.

Contact your service provider for more information and correct settings.

Preferred profile

Select Menu > Connect. > Internet tel. to change settings.

Before you can select the default profile, you must create profiles in Menu > Tools > Settings >

Connection > Internet tel. settings.

To select the profile that is used by default when you make net calls, select Preferred profile, and press the joystick. Scroll to the desired profile, and press the joystick.

Only those profiles where you have selected

Registration > When needed setting in Menu > Tools > Settings > Connection > Internet tel. settings are shown

in the list.

To change the registration of your net telephone profiles, scroll to the profile that you want to register or unregister, and press the joystick. Press the joystick again to select Registered or Not registered.

To save your settings, select Back.

Device security

Select Menu > Tools > Settings > Security > Phone and

SIM.

You can modify the security settings for the PIN code, automatic lock, and SIM card change, and change codes and passwords.

Avoid using codes that are similar to emergency numbers to prevent accidental dialing of the emergency number.

Codes are shown as asterisks. When you change a code, enter the current code, then the new code twice.

Define security settings

To define device and SIM card settings, select a setting and Options > Change.

When calls are limited to closed user groups, calls may be possible to the official emergency number programmed into your device.

Define the following settings:

• PIN code request — Select On to request that the PIN code is entered each time the device is switched on. This setting cannot be changed if the device is switched off. Some SIM cards do not allow turning off the PIN code request.

• PIN code — Change the PIN code. The PIN code must be 4 to 8 numbers long. The PIN code protects your SIM card against unauthorized use and is provided with the SIM card. After three consecutive incorrect PIN code entries, the PIN code is blocked, and you need to use the PUK code to unblock it before you can use the SIM card again.

• PIN2 code — Change the PIN2 code. The PIN2 code must be 4 to 8 numbers long. The PIN2 code is required to access some functions of the device and is provided with the SIM card. After three consecutive incorrect PIN2 code e ntries, the PIN2 code is blocked, and you need to use the PUK2 code to unblock it before you can use the SIM card again.

Make calls

• Autolock period — Set a time-out after which the

device is automatically locked and can be used only if the correct lock code is entered. Enter a number for the time-out in minutes, or select None to turn off the autolock period. When the device is locked, you can still answer incoming calls and calls may still be

Make calls

possible to the official emergency number programmed into your device.

• Lock code — The new code can be 4-256 characters long. Both alphabets and digits can be used, and both uppercase and lowercase alphabets are possible. The device notifies you if the lock code is not properly formatted. The device remembers the previously used lock codes and prevents you from using the same lock code several times.

• Lock if SIM changed — Set the device to ask for the lock code when an unknown, new SIM card is inserted into your device. The device maintains a list of SIM cards that are recognized as the owner’s cards.

• Allow remote lock — If you set this option on, you can lock the device by sending a predefined text message from another phone. When you set this option on, you need to enter the remote lock message and confirm the message. The message must be at least 5 characters long.

• Closed user group (network service) — Specify a

group of people to whom you can call and who can call you.

• Confirm SIM services (network service) — Set the device to display confirmation messages when you are using a SIM card service.

Change the barring password

To change the password used for barring voice, fax, a nd data calls, select Menu > Tools > Settings > Call

barring > Cellular call barring > Options > Edit barrings passw.. Enter the current code, then the new code twice.

The barring password must be four digits long. For details, contact your service provider.

Fixed dialing

When fixed dialing is activated, calls may be possible to the official emergency number programmed into your device.

Select Menu > Contacts > Options > SIM contacts > Fixed

dialling contacts.

With the fixed dialing service, you can restrict calls from your device to only certain phone numbers. Not all SIM cards support the fixed dialing service. Contact your service provider for more information.

Select Options, and select from the following options:

• Activ. fixed dialling — Restrict calls from your device. To cancel the service, select Deact. fixed dialling. You need your PIN2 code to activate and deactivate fixed dialing or edit your fixed dialing contacts. Contact your service provider if you do not have the code.

• New SIM contact — Add a phone number to the list of numbers to which calls are allowed. Enter the contact name and phone number. To restrict calls by a country prefix, enter the country prefix in New SIM

contact. All phone numbers to which calls are

allowed must start with this country prefix.

• Copy to Contacts — Copy the fixed dialing contact to

Contacts.

• Add from Contacts — Copy a contact from Contacts to your fixed dialing list.

Tip: To send text messages to the SIM contacts while the fixed dialing service is active, you need to add the text message center number to the fixed dialing list.

To view or edit a phone number to which calls from your device are allowed, select Options > SIM contacts >

Fixed dialling contacts.

To call the contact, press the call key.

To edit the phone number, select Options > Edit. You may need your PIN2 code to edit your fixed dialing numbers.

To delete the contact, press the clear key.

Make calls

Contacts

Select Menu > Contacts.

Contacts

Manage all of your contact information, such as phone numbers and addresses. Add a personal ringing tone, voice tag, or a thumbnail image to a contact. Send contact information to compatible devices or receive contact information as business cards from compatible devices, and add them to your own list of contacts.

To add a contact, select Options > New contact. Enter the contact information, and select Done.

To edit information in a contact card, scroll to the contact, and select Options > Edit. Select from the following options:

• Add thumbnail — Add a thumbnail image that will display when a contact calls you. The image must be previously saved to your device or memory card.

• Remove thumbnail — Remove the image from the contact card.

• Add detail — Add fields of information to a contact card, such as Job title.

• Delete detail — Delete any details that you added to a contact card.

• Edit label — Edit the field names of the contact card.

Manage contact groups

Create a contact group so that you can send text or email messages to several recipients at the same time.

1. Scroll to the right, and select Options > New group.

2. Enter a name for the group or use the default name, and select OK.

3. Open the group, and select Options > Add

members.

4. Scroll to each contact you want to add to the group, and press the joystick to mark it.

5. Select OK to add all marked contacts to the group. The following options are available when you select

Options in the contact groups view:

• PTT options — Make a push to talk call either to

an individual or to a group, or send a callback request.

• Open — Open the contact group and view the

group members.

• Create message — Send a message.

• New group — Create a new contact group.

• Delete — Delete a contact group.

• Rename — Rename the contact group.

• Ringing tone — Assign a ringing tone to a contact

group.

• Contacts info — View the information for a

contact group.

• Settings — Set the name display settings for

contact group members.

Manage default information

Assign a default number or address to a contact so you can easily call or send a message to the default number or address, even if several numbers or addresses are saved to that contact.

To change default information for a contact, open the contact, and select Options > Defaults. Select the number or address you want to set as a default, and select OK.

The default number or address is underlined in the contact.

Copy contacts between SIM and device memory

For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.

To copy contacts from a SIM card to device memory, select Options > SIM contacts > SIM directory to open the SIM directory. Mark the contacts you want to copy, or select Mark all to copy all contacts. Select Options >

Copy to Contacts.

To copy contacts from the device memory to a SIM card, select Options > Copy to SIM direct.. Mark the contacts you want to copy, or select Mark all to copy all contacts. Select Options > Copy to SIM direct..

Select Options > SIM contacts > SIM directory to see the names and numbers stored on the SIM card. In SIM directory you can add, edit, or copy numbers to

Contacts, and you can make calls.

Select ringing tones for contacts

Select a ringing tone for a contact or contact group. If the caller's phone number is sent with the call and your device recognizes the number, the ringing tone plays when the contact calls you.

To select a ringing tone for a contact or contacts group, open the contact or contact group, and select Options >

Ringing tone. A list of ringing tones opens. Select the

ringing tone you want to use, and select OK.

To remove the ringing tone, select Default tone from the list of ringing tones.

Business cards

Select Menu > Contacts. You can send, receive, view, and save contact cards as

business cards in vCard or Nokia Compact Business Card format.

You can send business cards to compatible devices using SMS, MMS, or e-mail, or an infrared or Bluetooth connection.

To send a business card, select the contact card from the contacts list, and select Options > Send. Select Via

Contacts

text message, Via multimedia, Via e-mail, Via Bluetooth, or Via infrared. Enter the phone number or

address, or add a recipient from the contacts list. Select

Options > Send. If you select SMS as the sending method,

contact cards are sent without images.

Contacts

To view a received business card, select Open from the displayed notification, or open the message from the inbox folder in Messag..

To save a business card, select Options > Save business

card when the incoming message appears on the

device.

To save a received business card, select Options > Save

business card.

To delete a received business card, select Options >

Delete.

Messages

Select Menu > Messag.. Before sending or receiving messages, you may need to

do the following:

• Insert a valid SIM card in the device and be located in a service area of the cellular network.

• Verify that the network supports the messaging features you want to use and that they are activated on your SIM card.

• Define Internet access point (IAP) settings on the device. See "Access points," p. 88.

• Define e-mail account settings on the device. See "Email account settings," p. 49.

• Define SMS settings on the device. See "Text message settings," p. 41.

• Define MMS settings on the device. See "Multimedia message settings," p. 45.

The device may recognize the SIM card provider and automatically configure some of the message settings. If not, you may need to define the settings manually, or contact your service provider, network operator, or Internet service provider to configure the settings.

The Messag. application displays each type of messaging folder in a list format with the newest message displayed first in each folder.

Select one of the following:

• New message — Create and send a new text, multimedia, or e-mail message.

• Inbox — View received messages, except e-mails and cell broadcast messages.

• My folders — Create your own folders to store messages and templates.

• Mailbox — View and reply to received e-mail.

• Drafts — Store messages that have not been sent.

• Sent — Store messages that have been sent.

• Outbox — View messages waiting to be sent.

• Reports — View information about the delivery of

sent messages.

Organize messages

To create a new folder to organize your messages, select My folders > Options > New folder. Enter the folder name, and select OK.

To rename a folder, select the folder and Options >

Rename folder. Enter the new folder name, and select OK. You can only rename folders that you have created.

To move a message to another folder, open the message, and select Options > Move to folder, the folder, and OK.

To sort messages in a specific order, select Options >

Sort by. You can sort the messages by Date, Sender, Subject, or Message type.

Messages

Search for messages

To search for a message, open the folder in which you want to search, select Options > Find. Enter the search term, and select OK.

Messages

Messaging settings

Select Options > Settings.

To define or edit settings for different message types, select Text message, Multimedia message, E-mail,

Service message, Cell broadcast, or Other.

See "Text message settings," p. 41. See "Multimedia message settings," p. 45. See "E-mail account settings," p. 49.

• Active standby mode — Select the messaging folder (for example, your inbox or an e-mail account) that you want to see in the active standby mode.

• Folder view — Define how you want the messages in the inbox to be shown.

The settings available for editing may vary.

Text messages

Your device supports the sending of text messages beyond the character limit for a single message. Longer messages are sent as a series of two or more messages. Your service provider may charge accordingly. Characters that use accents or other marks, and characters from some language options like Chinese, take up more space limiting the number of characters that can be sent in a single message.

Other settings

Select Menu > Messag. > Options > Settings > Other. Select from the following:

• Save sent messages — Select whether to store sent messages in the Sent folder.

• No. of saved msgs. — Enter the number of sent messages that you want to save. When the limit is reached, the oldest message is deleted.

• Memory in use — Select where to save your received messages. You can save messages to memory card only if a memory card is inserted.

• New e-mail alerts — Select whether you want to be alerted when a new message arrives in your

mailbox.

Write and send text messages

Select Menu > Messag. > New message > Text

message.

1. In the To field, press the joystick to select recipients from Contacts, or enter the recipients' mobile phone numbers manually. If you enter more than one number, separate the numbers with a semicolon. To insert a semicolon, press *.

2. Enter the text of the message. To use a template, select Options > Insert > Template.

3. Select Options > Send to send the message.

Note: When sending messages, your device may display Message Sent. This is an indication that the message has been sent by your device to the message center number programmed into your device. This is not an indication that the message has been received at the intended destination. For more details about messaging services, check with your service provider.

Reply to received text messages

To reply to a text message, open the message from the

Inbox. Select Options > Reply. Enter the text of the

message, and select Options > Send.

To call the sender of a text message, open the message from the Inbox, and select Options > Call.

Text messages on the SIM card

Text messages may be stored on your SIM card. Before you can view SIM messages, you must copy the messages to a folder in the device. After copying the messages to a folder, you can view them in the folder or delete them from the SIM card.

Select Options > SIM messages.

1. Select Options > Mark/Unmark > Mark or Mark all to mark every message.

2. Select Options > Copy.

3. Select a folder and OK to begin copying.

To view SIM card messages, open the folder where you copied the messages, and open a message.

To delete a text message from the SIM card, select the message, and press the clear key.

Text message settings

Select Options > Settings > Text msg.. Define the following:

• Message centres — View the available message centers for your device.

• Msg. centre in use — Select a message center to send the message.

• Character encoding — Select Reduced support to use automatic character conversion to another encoding system when available.

• Receive report — Select Yes if you want that the network sends you delivery reports on your messages (network service).

• Message validity — Select how long the message center resends your message if the first attempt fails (network service). If the recipient cannot be reached within the validity period, the message is deleted from the message center.

• Message sent as — Convert the message to another format, such as Text, Fax, Paging or E-mail. Change this option only if you are sure that your message center is able to convert text messages into these other formats. Contact your network operator.

• Preferred conn. — Select the preferred method of connection when sending text messages from your device.

Messages

• Reply via same ctr. — Select whether you want the reply message to be sent using the same text message center number (network service).

Tip: To remove the picture from the message, select Options > Remove picture.

Messages

Picture messages

Note: Picture message function can be used only if it is supported by your network operator or service provider. Only devices that offer picture message features can receive and display picture messages.

Select Menu > Messag..

To view a picture message, open the message from the

Inbox folder.

Forward picture messages

Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred or forwarded.

1. In the Inbox, open a picture message and select

Options > Forward.

2. In the To field, enter a recipient's number, or press

the joystick to add a recipient from Contacts. If you enter more than one number, separate the numbers with a semicolon. To insert a semicolon, press *.

3. Enter the text of your message. The text can have

120 characters. To use a template, select Options >

Insert > Template.

4. To send the message, press the call key.

Multimedia messages

A multimedia message (MMS) can contain text and objects such as images, sound clips, or video clips.

Note: On ly d ev i ce s th a t h a ve compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device.

Before you can send or receive multimedia messages on your device, you must define the multimedia message settings. Your device may have recognized the SIM card provider and automatically configured the multimedia message settings. If not, contact your service provider. See "Multimedia message settings," p. 45.

Create and send multimedia messages

The default setting of the multimedia message service is generally on.

Select New message > Multimedia message. Copyright protections may prevent some images,

ringing tones, and other content from being copied, modified, transferred or forwarded.

1. In the To field, press the joystick to select recipients from Contacts, or enter the recipients' mobile phone numbers or e-mail addresses manually.

2. In the Subject field, enter a subject for the message. To change the fields that are visible, select Options >

Address fields.

3. Enter the text of the message, and select Options >

Insert object to add media objects. You can add

objects such as Image, Sound clip, or Video clip. The wireless network may limit the size of MMS

messages. If the inserted picture exceeds this limit, th e de vi ce m ay ma ke i t s mal ler so tha t it can b e se nt by MMS.

4. Each slide of your message can contain only one video or audio clip. To add more slides to your message, select Options > Insert new > Slide. To change the order of slides in your message, select

Options > Move.

5. To preview a multimedia message before sending it, select Options > Preview.

6. Press the joystick to send the multimedia message.

Create presentations

Select New message > Multimedia message.

1. In the To field, press the joystick to select recipients from Contacts, or enter the recipients' mobile phone numbers or e-mail addresses manually.

2. Select Options > Create presentation and a presentation template.

Tip: A template may define which media objects you can include in the presentation, where they appear, and which effects are displayed between images and slides.

3. Scroll to a text area and enter the text.

4. To insert images, sound, video, or notes in your presentation, scroll to the corresponding object area, and select Options > Insert.

Tip: To move between object areas, scroll up and down.

5. To add slides, select Insert > New slide.

6. Select Options and from the following:

• Preview — See what your multimedia presentation

looks like when it is opened. Multimedia presentations may only be viewed in compatible devices that support presentations. They may appear different in different devices.

• Backgrnd. settings — Select the background color for

the presentation and background images for different slides.

• Effect settings — Select effects between images or

slides.

Creating multimedia presentations is not possible if

MMS creation mode is Restricted. To change MMS creation mode, select Messag. > Options > Settings > Multimedia message.

The available options may vary. To send your multimedia presentation, press the call

key.

Messages

Tip: To save the message in Drafts without sending it, select Done.

Receive and reply to multimedia

Messages

messages

Important: Multimedia message objects may contain viruses or otherwise be harmful to your device or PC. Do not open any attachment if you are not sure of the trustworthiness of the sender.

If you receive multimedia messages containing objects unsupported by your device, you cannot open them.

1. To reply to a multimedia message, open the

message from the Inbox, and select Options >

Reply.

2. Select Options > To sender to reply to the sender

with a multimedia message or Options > Via text

message to reply to the sender with a text message.

3. Enter the text of the message, and press the joystick

to send it.

View presentations

Open the Inbox, scroll to a multimedia message that contains a presentation, and press the joystick. Scroll to the presentation, and press the joystick.

To pause the presentation, press either selection key below the display.

After you pause the presentation or playing finishes, select Options and from the following:

• Open link — Open a Web link and browse the Web page.

• Activate scrolling — Scroll text or images too large to fit on the display.

• Continue — Resume playing the presentation.

• Play — Replay the presentation from the start.

• Find — Find phone numbers and e-mail or Web

addresses the presentation may contain. You may use these numbers and addresses to make calls, send messages, or create bookmarks, for example.

The available options may vary.

View media objects

Open the Inbox, scroll to a received multimedia message and press the joystick. Select Options >

Objects.

To view or play a media object, scroll to it, and press the joystick.

Media objects and message attachments may contain viruses or other harmful software. Do not open any objects or attachments unless you are sure of the trustworthiness of the sender.

To save a media object in its corresponding application, scroll to the object, select Options > Save.

To send a media object to compatible devices, scroll to it, and select Options > Send.

Tip: If you receive multimedia messages that contain media objects your device cannot open, you may be able to send these objects to another device such as a computer.

Multimedia message settings

Select Options > Settings > Multimedia message. Define the following settings:

• Image size — Select Small or Large to scale images in multimedia messages. Select Original to maintain the original image size of multimedia messages.

• MMS creation mode — Select Restricted to have your device prevent you from including content in multimedia messages that may not be supported by the network or the receiving device. To receive warnings about including such content, select

Guided. To create a multimedia message with no

restrictions on attachment type, select Free. If you select Restricted, creating multimedia presentations is not possible.

• Access point in use — Select the default access point to connect to the multimedia message center. You may not be able to change the default access point if it is preset in your device by your service provider.

• Multimedia retrieval — Select Always automatic to always receive multimedia messages automatically,

Auto. in home network to receive notification of a

new multimedia message that you can retrieve from the message center (for example, when you are traveling abroad and are outside your home network), Manual to retrieve multimedia messages from the message center manually, or Off to prevent receipt of any multimedia messages.

• Allow anon. msgs. — Select whether you want to receive messages from unknown senders.

• Receive adverts — Select whether you want to receive messages defined as advertisements.

• Receive report — Select Yes to have the status of the sent message to be shown in the log (network service). Receiving a delivery report of a multimedia message that has been sent to an e-mail address may not be possible.

• Deny report sending — Select Yes to not send delivery reports from your device for received multimedia messages.

• Message validity — Select how long the messaging center tries to send the message (network service). If the recipient of a message cannot be reached within the validity period, the message is removed from the multimedia messaging center. Maximum

time is the maximum amount of time allowed by the

network.

E-mail messages

To receive and send mail, you must have a remote mailbox service. This service may be offered by an Internet service provider, a network service provider, or your company. Your device is compliant with Internet standards SMTP, IMAP4 (revision 1), and POP3, and with different push e-mail solutions. Other e-mail providers

Messages

may offer services with different settings or features than those described in this user guide. Contact your email provider or service provider for more details.

Before you can send, receive, retrieve, reply to, and forward mail on your device, you must also do the

Messages

following:

• Configure an Internet access point (IAP). See "Access points," p. 88.

• Set up an e-mail account, and define the e-mail settings correctly. See "E-mail account settings," p. 49.

Follow the instructions from your remote mailbox and Internet service providers. Contact your network and Internet service providers or operator for the correct settings.

Set up your e-mail

If you select Mailbox and have not set up your e-mail account, you are prompted to do so. To start setting up the e-mail account with the mailbox guide, select Yes.

1. To start entering the e-mail settings, select Start.

2. In Mailbox type, select IMAP4 or POP3, and select

Next.

Tip: POP3 is a version of the post office protocol that is used to store and retrieve e-mail or Internet mail messages. IMAP4 is a version of the Internet message access protocol that lets you access and manage e-mail messages while the messages are

still on the e-mail server. You can then

choose which messages to download to your device.

3. In My e-mail address, enter your e-mail address. To insert @ or other special characters, press *. To insert a full stop, press 1. Select Next.

4. In Incoming mail serv., enter the name of the remote server that receives your e-mail, and select

Next.

5. In Outgoing mail serv., enter the name of the remote server that sends your e-mail, and select Next. Depending on your mobile operator, you might have to use your mobile operator's outgoing mail server instead of your e-mail provider's.

6. In Access point, select the Internet access point your device should use when it retrieves the e-mails. If you select Always ask, each time the device starts to retrieve e-mail, it asks which Internet access point it should use, but if you select an access point, the device makes the connection automatically. Select

Next.

Tip: If you select Select group, the device makes the connection automatically using the best available Internet access point from the access point group. Select the access point group, and Back to save the selection.

7. Enter a name for your new mailbox, and select

Finish.

When you create a new mailbox, the name you give to the mailbox replaces Mailbox in the Messag. main view. You can have up to six mailboxes.

Select your default mailbox

If you have defined several mailboxes, you can select one of them as your default mailbox. To define the default mailbox, select Options > Settings > E-mail >

Mailbox in use and the mailbox.

If you have defined several mailboxes, you must select the mailbox that you want to use every time you start composing a new e-mail message.

Connect to mailbox

E-mail addressed to you is not automatically received by your device, but by your remote mailbox. To read your e-mail, you must first connect to the remote mailbox; then select the e-mails you wish to retrieve into your device. To receive and send e-mail, you need to register for an e-mail service. To set up a mailbox in your device, select Messag. > Options > Settings > E-

mail > Options > New mailbox. Contact your service

provider for the correct settings.

T o r e tr i ev e re c ei v ed e -m a il me s s ag e s t o yo ur d ev i ce a nd view them offline, select your mailbox in the Messag. main view. When the device asks Connect to mailbox?, select Yes.

To view e-mail messages in a folder, scroll to the folder, and press the joystick. Scroll to a message, and press the joystick.

To retrieve e-mail messages to your device, select

Options > Retrieve e-mail > New to retrieve new

messages that you have neither read nor retrieved,

Selected to retrieve only messages you select from the

remote mailbox, or All to retrieve all messages not previously retrieved.

To disconnect from a remote mailbox, select Options >

Disconnect.

View e-mail offline

Working offline means that your device is not connected to a remote mailbox. Managing your e-mail offline enables you to save in connection costs and work in conditions that do not allow a data connection. Any changes you make in the remote mailbox folders while offline take effect in your remote mailbox the next time you go online and synchronize. For example, if you delete an e-mail from your device when offline, the email is deleted from the remote mailbox the next time you connect to the mailbox.

1. Select Messag. > Options > Settings > E-mail. Select

the e-mail account, and press the joystick. Select

Retrieval settings > E-mail to retrieve > Msgs. & attachs. to retrieve entire messages with their

attachments to your device.

2. Open your mailbox, and se lect Options > Retrieve e-

mail. Select New to retrieve new messages that you

have neither read nor retrieved, Selected to retrieve only messages you select from the remote mailbox, or All to retrieve all messages not previously retrieved. The device goes online and connects to the mailbox to retrieve the mails.

3. After retrieving the e-mails, select Options >

Disconnect to return to the offline mode.

4. To view an e-mail message, scroll to it, and press the

joystick.

Messages

Some options require you to connect to your remote mailbox.

Tip: To subscribe to other folders in your remote mailbox, select E-mail settings >

Messages

Retrieval settings > Folder subscriptions. E-mail

in all subscribed folders is updated when you retrieve e-mail from your remote mailbox.

Read and reply to e-mail

Important: E-mail messages may contain viruses or otherwise be harmful to your device or PC. Do not open any attachment if you are not sure of the trustworthiness of the sender.

To read a received e-mail, scroll to the e-mail, and press the joystick.

To search for an e-mail in your mailbox, select Options >

Find. Enter the search term, and select OK.

To open an attachment, select Options > Attachments. Scroll to the attachment, and press the joystick.

To reply only to the sender of an e-mail, open the e-mail, and select Options > Reply > To sender.

To reply to all recipients of an e-mail, open the e-mail, and select Options > Reply > To all.

To delete an attachment from an e-mail that you are sending, select the attachment and Options >

Attachments > Remove.

Tip: If you reply to an e-mail that contains

attached files, the attachments are not

included in the reply. If you forward the received e-mail, attachments are included.

To set the message priority, select Options > Sending

options > Priority and from the available options.

To call the sender of the e-mail, open the e-mail, and select Options > Call.

To reply to the sender of the e-mail with a text message or multimedia message, open the e-mail, and select

Options > Create message.

To forward an e-mail, open the e-mail, and select

Options > Forward.

Delete messages

To free up memory space on your device, regularly delete messages from the Inbox and Sent folders, and delete retrieved e-mail messages.

To delete a message, scroll to it, and press the clear key. You can select to delete local e-mail messages on the

device and keep the original on the server, or you can delete both the local e-mail messages on the device and the original messages on the server.

To delete e-mails from the device only, select Options >

Delete > Phone only.

To delete e-mail both from the device and from the remote server, open an e-mail, and select Options >

Delete > Phone and server.

E-mail folders

If you create subfolders in your IMAP4 mailboxes on a remote server, you can view and manage these folders with your device. You can only subscribe to folders in your IMAP4 mailboxes. Subscribing to folders in a remote mailbox allows you to view those folders on your device.

To view folders in your IMAP4 mailbox, establish a connection, and select Options > E-mail sett. > Retrieval

settings > Folder subscriptions.

To view a remote folder, select a folder and Options >

Subscribe. Every time you go online, the subscribed

folders are updated. This may take some time if the folders are large.

To update the list of folders, select a folder and

Options > Update folder list.

Write and send e-mail

To write an e-mail, select Options > Add recipient to select the recipients' e-mail addresses from the contacts list, or enter the e-mail addresses in the To field. Use a semicolon to separate entries. Scroll down, and use the Cc field to copy other recipients, or the

Bcc field to blind copy recipients. In the Subject field,

enter the subject of the e-mail. Enter your e-mail message in the text area, and select Options > Send.

To attach a file to an e-mail, select Options > Insert, and select the attachment you want to add. For example, you can insert images, sound clips, notes and other files such as office files.

To set the sending time for an e-mail message, select

Options > Sending options > Send message. Select Immediately or During next conn. if you are working

offline. E-mail messages are stored in the Outbox before

sending. Unless the e-mail is sent immediately, you can open the Outbox and suspend and resume sending or view the e-mail.

E-mail account settings

Select Menu > Messag. > Mailbox. The settings available for editing may vary. Some

settings may be preset by your service provider. If you try to edit mailbox settings but have not set up

an e-mail account, the mailbox guide opens and helps you set up your e-mail account.

Settings for the received e-mail Select Incoming e-mail and from the following settings:

• User name — Enter the user name for the e-mail service.

• Password — Enter the password for the e-mail service.

• Incoming mail serv. — Enter the IP address or host name of the server that receives your e-mail.

• Access point in use — Select the Internet access point that the device uses for retrieving the e-mail messages that you receive.

• Default mailbox — Enter a name for the mailbox.

• Mailbox type — Select the mailbox protocol that your

remote mailbox service provider recommends. The options are POP3 and IMAP4. This setting can be

Messages

selected only once and cannot be changed if you have saved or exited from the mailbox settings. If you use the POP3 protocol, e-mail messages are not updated automatically when you are online. To see the latest e-mail messages, you must disconnect and

Messages

make a new connection to your mailbox.

• Security (ports) — Select the security option used to increase the security of the connection.

• Port — Define a port for connection.

• APOP secure login (for POP3 only) — Use with the

POP3 protocol to encrypt the sending of passwords to the remote e-mail server while connecting to the mailbox.

Settings for sent e-mail Select Outgoing e-mail and from the following settings:

• My e-mail address — Enter the e-mail address given to you by your service provider. Replies to your messages are sent to this address.

• User name — Enter the user name for the e-mail service.

• Password — Enter the password for the e-mail service.

• Outgoing mail serv. — Enter the IP address or host name of the mail server that sends your e-mail. You may only be able to use the outgoing server of your network operator. Contact your service provider for more information.

• Access point in use — Select the Internet access point that the device uses for sending the e-mail messages that you send.

• Security (ports) — Select the security option used to secure the connection to the remote mailbox.

• Port — Define a port for connection.

User settings

Select User settings and from the following settings:

• My name — Enter a name to appear before your email address when you send e-mail.

• Reply-to — Select whether you want replies to be redirected to a different address. Select On, and enter the e-mail address to which you want to direct the replies. You can only enter one address to which replies are directed.

• Delete e-mails from — Select whether you want to delete the e-mails only from the device or from both the device and the server. Select Always ask if you want to confirm from where the e-mail should be deleted every time you delete an e-mail.

• Send message — Select to send the e-mail as soon as possible, to send it the next time you retrieve email, or to store the e-mail in the Outbox, from where you can send it later.

• Send copy to self — Select whether you want to save a copy of the e-mail to your remote mailbox and to the address defined in My e-mail address in the settings for Outgoing e-mail.

• Include signature — Select whether you want to attach a signature to your e-mail messages.

• New e-mail alerts — Select whether you want to receive the new e-mail indications, a tone and a note, when new mail is received to the mailbox.

• Default encoding — Select the preferred method for character encoding.

Retrieval settings

Select Retrieval settings and from the following settings:

• E-mail to retrieve (for POP3 mailboxes only) — Select whether you want to retrieve only the e-mail header information such as sender, subject and date, e-mail, or e-mail with attachments.

• Retrieval amount — Select the number of e-mails you want to retrieve from the remote server to your mailbox.

• IMAP4 folder path (for IMAP4 mailboxes only) — Define the folder path for folders to be subscribed.

• Folder subscriptions (for IMAP4 mailboxes only) — Subscribe to other folders in the remote mailbox and retrieve content from those folders.

Automatic retrieval settings

Select Automatic retrieval and from the following settings:

• E-mail notifications — Select whether you want to receive notifications when new e-mail is received in your remote mailbox. Select Always enabled to always automatically retrieve new e-mail messages from your remote mailbox, or Only in home net. to automatically retrieve new e-mail messages from your remote mailbox only when you are in your home network and not, for example, traveling.

• Retrieval days — Select the days on which e-mails are retrieved to your device.

• Retrieval hours — Define the hours between which the e-mails are retrieved.

• Retrieval interval — Select the time interval between retrieving new e-mails.

Instant messaging

Select Menu > Connect. > IM. Instant messaging (IM) (network service) allows you to

converse with other people using instant messages a nd join discussion forums (IM groups) with specific topics. Various service providers maintain IM servers that you can log in to after you register to an IM service. Service providers may differ in their support of features.

If IM is not available from your wireless service provider, it may not appear in the menu of your device. Contact your service provider for more information about signing up for IM services and costs for services. For more information on the availability of IM settings, contact your network operator, service provider, or dealer.

You may receive the settings in a special text message from the network operator or service provider that offers the IM service. You must save the settings to access the service that you want to use. You can also enter the settings manually.

Connect to an IM server

To converse with an IM user or users, and to view and edit your IM contacts, you must log into the instant messaging server. Open IM, and select Options >

joystick to log in. You can obtain the user name, password, and other settings to log in from yo ur service provider when you register for the service.

Messages

Search IM users or IM groups

To search for IM users and user IDs, select IM contacts >

Options > New IM contact > Search. You can search by User's name, User ID, Phone number, and E-mail

Messages

address.

To search for IM groups and group IDs, select IM

groups > Options > Search. You can search by Group name, Topic, and Members (user ID).

Conversations with a single IM user

The Conversations view shows a list of the individual conversation participants with whom you have an ongoing conversation. Ongoing conversations are automatically closed when you exit IM.

To view a conversation, scroll to a participant, and press the joystick.

To continue the conversation, enter your message, and press the joystick.

To return to the conversations list without closing the conversation, select Back. To close the conversation, select Options > End conversation.

To start a new conversation, select Options > New

conversation. You can start a new conversation with a

different contact while you are inside another active conversation. However, you cannot have two active conversations with the same contact.

To insert an image to an instant message, select

Options > Send image, and select the image you want

to send.

To save a conversation participant to your IM contacts, select Options > Add to IM contacts.

To save a conversation, while in the conversation view, select Options > Record chat. The conversation is saved as a text file that can be opened and viewed in the

Notes application.

To send automatic replies to incoming messages, select

Options > Set auto reply on. You can still receive

messages.

IM groups

The IM groups view shows a list of the IM groups that you have saved or to which you are currently joined.

IM groups is available only if you logged into an IM

server when you opened the IM application, and the server supports IM groups.

To create an IM group, select Options > Create new

group.

To join an IM group or to continue a group conversation, scroll to the group, and press the joystick. Enter a message, and press the call key to send it.

To join an IM group that is not on the list, but for which you know the group ID, select Options > Join new

group.

To leave the IM group, select Options > Leave IM

group.

To remove an IM group, press the clear key.

Ban from groups

Scroll to the IM group, and select Options > Group >

Settings > Banned list.

To prevent IM users from joining the group, select

Options > Add to banned list and from the following:

• From IM contacts — Ban one or several of your IM contacts.

• Enter user ID — Enter the ID of the IM user.

To allow a banned user to join the group, select

Options > Remove.

IM contacts

When login to an IM service is complete, your contact list for the service provider is retrieved automatically. If your contact list is not available, wait a few minutes and try to retrieve your contacts list manually.

Tip: The online status of your IM contacts is shown by an indicator next to the contact name.

To create an IM contact card, select Options > New IM

contact. Enter the user ID and a nickname, and select Done. The user ID can be up to 50 characters, and the

IM service provider may require the user ID to be in the username@domain.com format. The nickname is optional.

To view a different list of your IM contacts, select

Options > Change contact list.

Scroll to an IM contact, select Options and from the following:

• Open conversation — Start or continue instant messaging with the contact.

• Contact details — View the contact card.

• Editing options — Edit or delete the contact card,

move it to another contact list, or receive a note when the contact's online status changes.

• Belongs to groups — See the IM groups the contact has joined.

• New contact list — Create a contact list for a specific group of IM contacts.

• Reload users' availab. — Update the online status of your IM contacts.

• Blocking options — Prevent or allow the reception of messages from the contact.

• Login — Connect to an instant messaging server if you did not log in when you opened the application.

• Logout — Disconnect from the IM server.

• Settings — Edit instant messaging application or

server settings.

The available options may vary.

To delete an IM contact, press the clear key.

Blocked contacts

Select IM contacts > Options > Blocking options > View

blocked list.

To find a blocked IM user, enter the first letters of the user's name. Matching names appear in a list.

To allow receiving messages from a blocked IM user, select Options > Unblock.

Messages

To prevent receiving messages from other IM users, select Options > Block new contacts. Select the IM user from your IM contacts, or enter the user ID.

Messages

Settings

Select Options > Settings > IM settings. Select from the following settings:

• Use screen name — To change the name that identifies you in IM groups, select Yes.

• Allow messages from — Select to receive instant messages from all other IM users, your IM contacts only, or not to receive messages at all.

• Allow invitations from — Select to receive invitations to IM groups from all IM users, your IM contacts only, or not to receive invitations at all.

• Msg. scrolling speed — To decrease or increase the

speed at which new messages are displayed, scroll left or right.

• Sort IM contacts — Select to list your IM contacts alphabetically or by their online status.

• Availabil. reloading — To update the online status of your IM contacts automatically, select Automatic.

• Offline contacts — Select if IM contacts with an offline status are shown in the IM contacts list.

The settings available for editing may vary. Contact your service provider for more information.

IM server settings

Select Options > Settings > Server settings. Scroll to the following options, and press the joystick to

configure your IM server:

• Servers — Add new, edit, or delete servers.

• Default server — Change the server to which your

device automatically logs into, scroll to the desired server, and press the joystick.

• IM login type — To establish a connection between your device and the default server automatically, select Automatic. Select Auto. in home network to automate the connection when in your home network. Select On app. start-up to connect to the server when you open the messaging application. Select Manual to connect to the server manually at any time.

Special messages

Your device can receive many kinds of messages that contain data:

• Operator logo — To save the logo, select Options >

Save.

• Ringing tone — To save a ring tone, select Options >

Save.

• Configuration message — You may receive settings from your network operator, service provider, or company information management department in a configuration message. To accept the settings, open the message, and select Options > Save all.

• E-mail notification — The note tells you how many new e-mails you have in your remote mailbox. An extended notification may list more detailed information.

Send service commands

Send a service request message to your service provider and request activation for certain network services.

To send a service request to your service provider, select

Options > Service command. Enter the service request

as a text message, and select Options > Send.

Messages

Connectivity

Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.

Connectivity

Your device offers several options to connect to the Internet, a corporate intranet, or to another device or PC. Wireless methods include wireless LAN, Bluetooth, and infrared. Your device supports a wired solution with a USB (Universal Serial Bus) cable connection for Nokia PC Suite or IP passthrough. Your device also allows you to communicate using net calls (Voice over IP), push to talk, instant messaging (chat), and modembased connections.

Internet access points

An access point is where your device connects to a network. To use e-mail and multimedia services or to connect to the Internet and browse web pages, you must first define Internet access points for these services. You may need to set up several Internet access points, depending on the sites you want to access. For example, browsing the Web may require one access point, and accessing your company intranet may require another. To connect to the Internet over GPRS, your device may have predefined, default Internet access point settings.

When you switch on your device for the first time, the access points may be configured automatically based

on the service provider information in your SIM card.

You can also receive the access points settings in a message from your service provider. This might reduce the number of settings you need to enter yourself.

The available options may vary. Some or all access points may be preset for your device by your service provider. You may not be able to add, edit, or delete access points.

Contact your service provider and e-mail service provider for more information on access points and their settings.

See "Connection settings," p. 88.

Set up an Internet access point for packet data (GPRS)

1. Select Menu > Tools > Settings > Connection > Access

points.

2. Select Options > New access point. To use an

existing access point as a basis for the new one, select Use existing settings. To start with an empty access point, select Use default settings.

3. Define the following settings.

• Connection name — Enter a descriptive name for the connection.

• Data bearer — Select Packet data.

• Access point name — Enter the name for the

access point. The name is usually provided by your service provider or network operator.

• User name — Enter your user name if required by the service provider. User names are often case-sensitive and provided by your service provider.

• Prompt password — Select Yes to enter your password each time you log into a server or No to save the password in your device memory and automate the login.

• Password — Enter your password if required by the service provider. The password is often casesensitive provided by the service provider.

• Authentication — Select Secure to always send your password encrypted or Normal to send your password encrypted when possible.

• Homepage — Enter the Web address of the page you want to display as a home page when you use this access point.

4. After defining the settings, select Options >

Advanced settings to define the advanced settings

or Back to save the settings and exit.

For information on the advanced settings, see the extended user guide on the Web.

Set up an Internet access point for wireless LAN

1. Select Menu > Tools > Settings > Connection > Access

points.

2. Select Options > New access point. To use an existing access point as a basis for the new one,

select Use existing settings. To start with an empty access point, select Use default settings.

3. Define the following settings.

• Connection name — Enter a descriptive name for the connection.

• Data bearer — Select Wireless LAN.

• WLAN netw. name — To enter the service set

identifier (SSID), that is, the name that identifies the specific wireless LAN, select Enter manually. To select the network from the wireless LANs in range, select Search for netw..

• Network status — Select Hidden if the network you are connecting to is hidden, or Public if it is not hidden.

• WLAN netw. mode — If you select

Infrastructure, devices can communicate with

each other and with wired LAN devices through a wireless LAN access point. If you select Ad-hoc, devices can send and receive data directly with each other, and no wireless LAN access point is needed.

• WLAN security mode — You must select the same security mode that is used in the wireless LAN access point. If you select WEP (wired equivalent privacy), 802.1x, or WPA (Wi-Fi protected access), you must also configure the relevant additional settings. See the extended user guide on the Web or the device help for more information.

• WLAN security sett. — Edit the security settings for the selected WLAN security mode.

• Homepage — Enter the Web address of the page you want to display as a home page when you use this access point.

The settings available for editing may vary.

Connectivity

Cable connection

Install the USB data cable driver to your PC before you use a cable connection. You can use the Data transfer without installing the USB data cable drivers.

Select Menu > Connect. > Data cbl..

Connectivity

Using a USB data cable, you can connect your device to a compatible PC . Connect the USB data cable to the bottom of the device. To change the device type you normally connect to your device with the data cable, press the joystick.

Select from the following:

• Ask on connection — Select whether you want to be asked for the device type every time you connect the data cable to your device.

• PC Suite — Connect the PC Suite to your device with the data cable, and use your device as a modem.

• Data transfer — Access and transfer data such as

music or image files from your computer using the data cable connection. To use the Data transfer mode, make sure that you have not selected USB as a connection type in the Manage connections settings in Nokia PC Suite. Insert a memory card to your device, connect the device to a compatible computer with the USB data cable, and select Data

transfer when the device asks which mode is used.

In this mode, your device acts as a mass storage device and you can see it as a removable hard drive in your computer. The device will switch into the

Offline profile if this is selected. End the connection

from the PC (for example, from an Unplug or Eject

Hardware wizard in Windows) to avoid damaging the memory card. After you end the connection, the

device returns to the profile in which it was before using the data transfer mode.

• IP passthrough — Select an access point through which to transfer data using the Internet protocol.

To save your selection, select Back.

Bluetooth

There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.

Features using Bluetooth technology, or allowing such features to run in the background while using other features, increase the demand on battery power and reduces the battery life.

This device is compliant with Bluetooth Specification

1.2 supporting the following profiles: Generic Access

Profile, Serial Port Profile, Dial-up Networking Profile, Headset Profile, Handsfree Profile, Generic Object Exchange Profile, Object Push Profile, File Transfer Profile, SIM Access Profile, and Basic Imaging Profile. To ensure interoperability between other devices supporting Bluetooth technology, use Nokia approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device.

Bluetooth technology enables wireless connections between electronic devices within a range of 10 meters (33 feet). A Bluetooth connection can be used to send images, videos, texts, business cards, calendar notes, or to connect wirelessly to devices using Bluetooth technology, such as computers.

Since devices using Bluetooth technology communicate using radio waves, your device and the other devices do not need to be in direct line-of-sight. The two devices only need to be within a maximum of 10 meters of each other, although the connection can be subject to interference from obstructions such as walls or from other electronic devices.

Start using Bluetooth

Select Menu > Connect. > Bluetooth.

1. When you activate Bluetooth for the first time, you are asked to give a name to your device. Give your device a unique name to make it easy to recognize if there are several Bluetooth devices in the vicinity.

2. Select Bluetooth > On.

3. Select My phone's visibility > Shown to all.

Your device and the name you entered can now be seen by other users with devices using Bluetooth technology.

Settings

Define the following settings:

• Bluetooth — Select On to be able to connect to

another compatible device using Bluetooth connectivity.

• My phone's visibility — Select Shown to all to allow

other devices using Bluetooth technology to find your device when you have set Bluetooth > On. To prevent other devices from finding your device,

select Hidden. Even if you select Hidden, paired devices can still detect your device.

• My phone's name — Enter a name for your device. The name is visible to other devices that search for devices using Bluetooth technology. The maximum length of the name is 30 characters.

• Remote SIM mode — Select On to enable another device, such as a compatible car kit enhancement, to use the SIM card in your device to connect to the network. See "SIM access profile," p. 61.

If Bluetooth was turned off as a result of entering

Offline profile, you must re-enable Bluetooth manually.

Security tips

When you are not using Bluetooth connectivity, select

Bluetooth > Off or My phone's visibility > Hidden.

Do not pair with an unknown device.

Send data

Several Bluetooth connections can be active at a time. For example, if you are connected to a headset, you can also transfer files to another compatible device at the same time.

1. Open the application where the item you want to

send is stored.

2. Select the item, and select Options > Send > Via

Bluetooth. The device searches for other devices

using Bluetooth technology within range and lists them.

Connectivity

Tip: If you have sent data using Bluetooth before, a list of the previous search results is displayed. To search for more Bluetooth devices, select More devices.

3. Select the device with which you want to connect,

Connectivity

and press the joystick to set up the connection. If the other device requires pairing before data can be transmitted, you are asked to enter a passcode.

4. When the connection has been established, Sending

data is shown.

The Sent folder in Messag. does not store messages sent using Bluetooth connectivity.

Bluetooth connectivity indicators

Bluetooth is active.

When the icon is blinking, your device is trying to

connect to the other device. When the icon is shown continuously, the Bluetooth connection is active.

Pair devices

Select Menu > Connect. > Bluetooth, and scroll right to open the Paired devices page.

Before pairing, create your own passcode (1-16 digits), and agree with the user of the other device to use the same code. Devices that do not have a user interface have a fixed passcode. You need the passcode only when you connect the devices for the first time. After pairing, it is possible to authorize the connection. See

"Authorize a device," p. 61. Pairing and authorizing

the connection makes connecting quicker and easier, as you do not have to accept a connection between paired devices every time you establish the connection.

The passcode for remote SIM access must have 16 digits.

1. Select Options > New paired device. The device starts to search for Bluetooth devices within range.

Tip: If you have sent data using Bluetooth before, a list of the previous search results is displayed. To search for more Bluetooth devices, select More devices.

2. Select the device with which you want to pair, and enter the passcode. The same passcode must be entered to the other device as well.

3. Select Yes to make the connection between your device and the other device automatic or No to confirm the connection manually every time a connection attempt is made. After pairing, the device is saved to the paired devices page.

To give a nickname to a paired device that is only displayed in your device, scroll to the device with which you have paired, and select Options > Assign short

name.

To delete a pairing, select the device whose pairing you want to delete and Options > Delete. To delete all pairings, select Options > Delete all.

Tip: If you are currently connected to a device and cancel the pairing with that device, pairing is removed immediately, and the connection is switched off.

Authorize a device

If you trust a paired device, you can allow it to connect automatically to your device. You can select from the following options:

• Set as authorised — Connections between your device and the other device can be made without your knowledge. No separate acceptance or authorization is needed. Use this status for your own devices, such as your compatible headset or PC, or devices that belong to someone you trust.

• Set as unauthorised — Co nnection requests from the other device must be accepted separately every time.

Receive data

If you want to receive data using Bluetooth, select

Bluetooth > On and My phone's visibility > Shown to all. When you receive data through Bluetooth

connectivity, a tone sounds, and you are asked if you want to accept the message. If you accept, the message is placed in the Inbox folder in Messag.

Tip: You can access the files in the device or on the memory card using a compatible accessory that supports the File Transfer Profile Client service (for example, a laptop computer).

SIM access profile

When the wireless device is in the remote SIM mode, you can only use a compatible connected enhancement, such as a car kit, to make or receive calls. Your wireless

device will not make any calls, except to the emergency numbers programmed into your device, while in this mode. To make calls from your device, you must first leave the remote SIM mode. If the device has been locked, enter the code to unlock it first.

With the SIM access profile, you can access the SIM card of your device from a compatible car kit device. This way, you do not need a separate SIM card to access SIM card data and connect to the GSM network.

To use the SIM access profile, you need the following:

• Compatible car kit device that supports Bluetooth wireless technology

• Valid SIM card in your device

For more information about car kit devices and compatibility with your device, see www.nokia.com and your car kit user guide.

Manage the SIM access profile

1. Select Menu > Connect. > Bluetooth to activate

Bluetooth connectivity in your device.

2. To enable remote SIM access, scroll to Remote SIM

mode, and press the joystick.

3. Activate Bluetooth in the car kit device.

4. Use your car kit device to start a search for

compatible devices. For instructions, see the user guide of your car kit device.

5. Select your device from the list of compatible

devices.

6. To pair the devices, enter the Bluetooth passcode

shown on the display of the car kit device to your device.

Connectivity

7. Authorize the car kit device. Select Menu >

Connect. > Bluetooth, and scroll to the Paired devices page. Scroll to the car kit device, and enter

the Bluetooth passcode. When the device asks to make the connection automatic, select Yes. Connections between your device and the car kit

Connectivity

device can be made without separate acceptance or authorization. If you select No, connection requests from this device must be accepted separately every time.

Tip: If you have already accessed the SIM card from the car kit with the active user profile, the car kit searches automatically for a device with the SIM card. If it finds your device, and automatic authorization is activated, the car device automatically connects to the GSM network when you switch on the car ignition.

When you activate the remote SIM access profile, you can use applications on your device that do not need network or SIM services.

To end the remote SIM access connection from your device, select Menu > Connect. > Bluetooth > Remote

SIM mode > Off.

such as business cards, calendar notes, and media files with a compatible device.

Send and receive data

1. Ensure that the infrared ports of the devices face each other. The positioning of the devices is more important than angle or distance.

2. Select Menu > Connect. > Infrared, and press the joystick to turn on infrared on your device. Turn on infrared on the other device.

3. Wait a few seconds until an infrared connection is established.

4. To send, locate the desired file in an application or the file manager, and select Options > Send > Via

infrared.

If data transfer is not started within 1 minute after the activation of the infrared port, the connection is cancelled and must be started again.

All items received through infrared are placed in the Inbox folder in Messag..

Positioning devices away from each other breaks a connection, but the infrared light beam remains active on your device until it is deactivated.

Infrared

Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This device is a Class 1 laser product.

Use infrared to connect two devices and transfer data between them. With infrared, you can transfer data

Data connections

Packet data

GPRS (general packet radio service) enables wireless access for mobile phones to data networks (network service). GPRS uses packet data technology where

information is sent in short bursts of data over the mobile network. The benefit of sending data in packets is that the network is occupied only when sending or receiving data. As GPRS uses the network efficiently, it allows for quick data connection set-up and fast data transmission speeds.

You must subscribe to the GPRS service. For availability and subscription to GPRS, contact your network operator or service provider.

Enhanced GPRS (EGPRS) is similar to GPRS, but it enables faster connection. For more information on the availability of EGPRS and data transfer speed, contact your network operator or service provider. Note that when you have selected GPRS as a data bearer, the device uses EGPRS instead of GPRS if this is available in the network.

During a voice call, you cannot establish a GPRS connection, and any existing GPRS connection is put on hold unless the network supports dual transfer mode.

UMTS

UMTS (universal mobile telecommunications system) is 3G mobile communication system. Besides voice and data, UMTS enables audio and video delivery to wireless devices.

Your device can automatically switch between the GSM and UMTS networks.

To select which network to use, select Menu > Tools >

Settings > Network and the network in Network mode. If you want the device to switch between the

networks automatically, select Dual mode.

The GSM network is indicated with , the UMTS network with When you use your device in GSM and UMTS networks,

multiple data connections can be active at the same time, and access points can share a data connection. In the UMTS network, data connections remain active during voice calls. You can, for example, surf the Web faster than previously possible while simultaneously speaking on the phone.

Wireless local area network (WLAN)

Some places, like France, have restrictions on the use of wireless LAN. Check with your local authorities for more information.

Features using wireless LAN, or allowing such features to run in the background while using other features, increase the demand on battery power and reduce the battery life.

This device can detect and connect to a wireless local area network.

If you move the device to another location within the wireless LAN and out of range of a wireless LAN access point, the roaming functionality can automatically connect your device to another access point that belongs to the same network. As long as you remain within range of access points that belong to the same network, your device can stay connected to the network.

Connectivity

Tip: A wireless LAN connection is established when you create a data connection using a wireless LAN Internet access point. The active wireless LAN connection is ended when you end the data connection.

Your device enables different types of communication

Connectivity

in a wireless LAN. The two operating modes are infrastructure and ad hoc.

• The infrastructure operating mode allows two kinds of communication: wireless devices communicate with each other through a wireless LAN access point or wireless devices communicate with a wired LAN device through a wireless LAN access point. The advantage of the infrastructure operating mode is that you can have more control over network connections because they pass through an access point. A wireless device can access the services that are available in a regular wired LAN: company database, e-mail, the Internet, and other network resources, for example.

• In the ad hoc operating mode you can send data to and receive it from other devices with compatible wireless LAN support , for example, to be printed. These functions may require an additional third party application to work. No wireless LAN access point is required. Simply make the necessary configurations and start communicating. Ad hoc networking is easy to set up, but communication is limited to devices that are within range and support compatible wireless LAN technology.

Connection manager

Select Menu > Connect. > Conn. mgr..

To view the status of data connections or end connections, select Act. data conn..

To search for wireless LANs available within range, select Availab. WLAN.

View and end active connections

Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding off for billing, and so forth.

In the active connections view, you can see the open data connections: data calls, packet data connections, and wireless LAN connections.

To view detailed information about network connections, select the connection from the list and

Options > Details. The type of information shown

depends on the connection type.

To end a network connection, select the connection from the list and Options > Disconnect.

To end all active network connections simultaneously, select Options > Disconnect all.

To view the details of a network, press the joystick.

Search for wireless LAN

To search for wireless LANs available within range, select Menu > Connect. > Conn. mgr. > Availab. WLAN. A list of found networks is displayed.

The available wireless LAN view shows a list of wireless LANs within range, their network mode (infrastructure or ad-hoc), signal strength indicator and network encryption indicators, and if your device has an active connection with the network.

To view the details of a network, press the joystick.

To create an Internet access point in a network, select

Options > Define access point.

of the device and computer are directly facing each other with no obstacles between them.

To connect your device to a computer using Bluetooth wireless technology, initiate the connection from the computer. To activate Bluetooth in your device, select

Menu > Connect. > Bluetooth and select Bluetooth > On.

If you use a cable to connect your device to a computer, initiate the connection from the computer.

Note that you may not be able to use some of the other communication features when the device is used as a modem.

Connectivity

Modem

Select Menu > Connect. > Modem. Together with a compatible computer, you can use your

device as a modem to connect to the Web. Before you can use your device as a modem

• You need the appropriate data communications software on your computer.

• You must subscribe to the appropriate network services from your service provider or Internet service provider.

• You must have the appropriate drivers installed on your computer. You must install drivers for your cable connection, and you may need to install or update Bluetooth or infrared drivers.

To connect the device to a compatible computer using infrared, press the joystick. Make sure the infrared ports

Mobile VPN

Select Menu > Tools > Settings > Connection > VPN. The Nokia mobile virtual private network (VPN) client

creates a secure connection to compatible corporate Intranet and services, such as e-mail. Your device connects from a mobile network, through the Internet, to a corporate VPN gateway that acts as a front door to the compatible corporate network. VPN client uses IP Security (IPSec) technology. IPSec is a framework of open standards for supporting secure exchange of data over IP networks.

VPN policies define the method used by VPN client and a VPN gateway to authenticate each other, and the encryption algorithms that they use to help protect the confidentiality of data. Contact your corporation for a VPN policy.

To use VPN with an application, the application must be associated with a VPN access point. A VPN access point is made up of an Internet access point and a VPN policy.

To manage VPN, select VPN management > Options >

Open and from the following options:

• VPN policy — Install, view, and update VPN policies.

Connectivity

• VPN policy servers — Edit the connection settings of VPN policy servers from which you can install and update VPN policies.

• VPN log — View the log for your VPN policy installations, updates and synchronizations, and other VPN connections.

Email data roaming

Select Menu > Tools > Settings > Connection > Access

point groups.

Your device allows roaming between wireless access technologies, such as WLAN and GPRS, for e-mail. For example, you can start an e-mail session at home and continue the session on your way to work. While your session continues uninterrupted, your handheld device switches from WLAN to GPRS and back to WLAN when you arrive at your workplace.

Access point groups

To create an access point group, select Access point

groups > Options > New group. In the Group name field,

enter a name for the group. Define in the Conn.

switching field whether to show the connection

switching process on the display of your device. Choose

and edit the access points that belong to this group in the Access points section.

To remove an access point in an access point group, select the access point and Options > Remove.

Web

Select Menu > Web (network service).

Web is one of the two browsers in your device. With Web, you can browse regular Web sites. These pages

use the extensible hypertext markup language (XHTML) or hypertext markup language (HTML). If you want to browse WAP pages, use Menu > Media > Services. Both of the browsers use the same bookmarks. The links in your received messages open in the Services browser.

Check the availability of services, pricing, and fees with your network operator or service provider. Service providers will also give you instructions on how to use their services.

Access points

To browse the Web, you need to configure Internet access point settings. If you are using a data call or a GPRS connection, your wireless network must support data calls or GPRS, and the data service must be activated for your SIM card. Your device might have configured the Internet access point settings automatically based on your SIM card. If not, contact your service provider for the correct settings.

Tip: You may receive the Internet access point settings from your service provider as a special text message or from the network operator's or service provider's Web pages.

You can also enter the Internet access point settings manually. See "Internet access points," p. 56.

Browse the Web

Use the joystick for browsing. The joystick is shown as a pointer on a Web page, and you can scroll the pages up, down, left and right with it. When you move the pointer over a link, the pointer changes into a hand. Press the joystick to open the link.

To browse the Web, select a bookmark, and press the joystick. You can also enter the Web address, and press the joystick. Use only services that you trust and that offer adequate security and protection against harmful software.

Tip: When you start to enter the address, addresses of pages you have previously visited that match your input are displayed. To open a page, scroll to the address, and press the joystick.

To open a Web link, scroll to it and press the joystick. On a Web page, new links appear underlined in blue and previously visited links in purple. Images that act as links have a blue border around them.

Addresses of the pages you visit are saved in the Auto.

bookmarks folder.

Keyboard shortcuts:

• Press 1 to open your Bookmarks.

• press 2 to find text.

Web

• Press 3 to return to the previous page.

• Press 5 to switch between your open browser

windows.

• Press 8 to open page overview.

• Press 9 to go to a different Web page.

Bookmarks

Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site.

To view a bookmarked Web page, scroll to the bookmark, and press the joystick.

To browse another Web pages, select Options >

Navigation options > Go to web address, enter the page

address, and select Go to.

To delete a bookmark, scroll to it, and press the clear key.

To add a bookmark, select Menu > Web > Options >

Bookmark manager > Add bookmark. Scroll to Name to

enter a descriptive name for the bookmark, Address to enter the Web page address, Access point to change the access point to connect to the Web page, and User

name or Password to enter your user name and

password, if required by the service provider. To save

the bookmark, select Back.

Download items

Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software.

You can download different items such as ri nging tones, images, operator logos, themes, and video clips. To download an item, scroll to it, and press the joystick. These items can be provided free, or you can purchase them. Downloaded items are handled by the respective applications in your device.

When you start a download, a list of ongoing, paused, and completed downloads from the current browsing session is displayed. To view the list, you can also select

Options > Tools > Downloads. In the list, scroll to an

item, and select Options to pause, resume, or cancel ongoing downloads; or open, save, or delete completed downloads.

To purchase items:

1. To download the item, scroll to the link, and press

the joystick.

2. Select the appropriate option to purchase the item.

3. Carefully read all the information provided. To

continue the download, select Accept. To cancel the download, select Cancel.

End a connection

To end the connection and view the browser page offline, select Options > Advanced options >

Disconnect; or to end the connection and close the

browser, select Options > Exit.

Clear the cache

A cache is a memory location that is used to store data temporarily. If you have tried t o a cc e ss or h av e a c ce ss ed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed are stored in the cache.

To clear the cache, select Options > Advanced options >

Clear cache.

News feeds and blogs

Select Menu > Web > Web feeds. Feeds usually contain headlines and articles, often

about recent news or other topics.

Tip: Blog is a shortening of Weblog, which is a continuously updated Web diary . Often the author's personality is an important factor in the blog.

To download a feed or blog, scroll to it, and press the joystick.

To add a feed or blog, select Options > Manage feed >

New feed, and enter the information.

To edit a feed or blog, scroll to a feed, select Options >

Manage feed > Edit, and modify the information.

Web settings

Select Menu > Web > Options > Settings. Define the following settings:

• Access point — Scroll to the access point to connect to Web pages, and press the joystick.

• Load imgs. & sounds — Select No to load pages faster when browsing by not loading the images on them.

• Default encoding — Select the correct character encoding for your language.

• Auto. bookmarks — Select On to save Web page addresses that you visit automatically in the Auto.

bookmarks folder. To hide the folder, select Hide folder.

• Screen size — Select Full screen to use the whole display area for viewing Web pages. You can press the left selection key to open Options and use the available options while browsing in full screen mode.

• Homepage — Select the page that you want to appear as your homepage. Select Default to use the access point homepage, User defined to enter the homepage address, or Use current page to use the currently open Web page.

• Mini map — Select whether you want to see an overview of the page as a miniature on top of the page you are viewing.

• History list — Select whether you want to see miniatures of the pages you have visited when you want to go back in your browsing history.

• Cookies — Select to allow or reject the sending and receiving of cookies. Cookies are info the network server collects about your visits to various Web pages. They are necessary if you shop on the Web

Web

(for example, to retain the items you buy until you reach the cashier page). However, the information

Web

may be misused (for example, you may receive unwanted advertisements in your device).

• Java/ECMA script — Some Web pages may include program commands that affect the appearance of the page or interaction between the page and its browsers. To deny the use of such scripts, select

Disabled (for example, if you have trouble

downloading).

• Security warnings — Select Show or Hide to see or hide the security warnings you may receive during browsing.

• Block pop-ups — Select whether you want to allow pop-ups. Some pop-ups may be necessary (for example, smaller windows where you write e-mails in Web-based mail systems), but they may also contain unwanted advertising.

Services

Select Menu > Media > Services (network service).

Services is one of the two browsers in your device. With Services, you can browse WAP pages that have been

designed specially for mobile devices. For example, operators may have WAP pages for mobile devices. To browse regular Web pages, use the other browser in

Menu > Web.

Check the availability of services, pricing, and fees with your network operator or service provider. Service providers will also give you instructions on how to use their services.

Tip: To start a connection, press and hold 0 in the standby mode.

Media applications

Copyright protections may prevent some images, mus ic (including ringing tones), and other content from being copied, modified, transferred or forwarded.

Select Menu > Media.

Media contains different media applications that allow

you to save and view images, record sounds, and play sound clips.

Gallery

Select Menu > Media > Gallery. Use Gallery to access and use different types of media,

including images, videos, music, and sounds. All viewed images and videos and all received music and sounds are automatically saved to Gallery. You can browse, open, and create folders; and mark, copy, and move items to folders. Sound clips are opened in the Music Player, and video clips and streaming links in the RealPlayer application.

To open a file or a folder, press the joystick. Images are opened in the image viewer.

To create a new folder, select Options > Organise > New

folder.

To copy or move files, select a file and Options >

Organise > Move to folder, New folder, Move to memory card, Copy to memory card, Copy to phone mem., or Move to phone mem..

To download files into the Gallery in one of the main folders using the browser, select Graphic downl., Video

downl., Track downl., or Sound downl.. The browser

opens, and you can choose a bookmark or enter the address for the site to download from.

To search for a file, select Options > Find. Start to enter a search string (for example, the name or date of the file you are searching for). Files that match the search are shown.

Images

Select Menu > Media > Gallery > Images.

Images consists of two views:

• In the image browser view you can send, organize, delete, and rename images stored in your device or memory card. You can set images as wallpaper for your display.

• In the image viewer, which opens when you select an image in the image browser view, you can view, and send individual images.

The following file formats are supported: JPEG, BMP, PNG, and GIF 87a/89a. The device does not necessarily support all variations of the file formats.

To open an image for viewing, select an image in the image browser view, and select Options > Open. The image opens in the image viewer.

Media applications

To open the next or previous image for viewing, scroll right or left in the image viewer.

To enlarge the viewed image on the display, select

Options > Zoom in, or press 5 or 7. To reduce the viewed

image on the display, select Zoom out or press 0.

To view the image in full screen size, select Options >

Full screen or press 7 twice. To return to normal view,

select Options > Normal screen.

To rotate an image, select an image, and Options >

Media applications

Rotate. Select Right to rotate the image clockwise by 90

degrees, or select Left to rotate the image counterclockwise by 90 degrees.

Manage image files

Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred or forwarded.

To view detailed information about an image, select an image and Options > View details. Size and format of the file, the time and date the file was last modified and the resolution of the image in pixels are displayed.

To send an image, select the image, Options > Send, and the method for sending.

To rename an image, select an image and Options >

Rename. Enter a new name, and select OK.

To set an image as wallpaper, select the image and

Options > Set as wallpaper.

To add an image to a contact card, select an image and

Options > Assign to contact. The contacts view opens,

and you can select the contact for the image.

RealPlayer

Copyright protections may prevent some images, ringing tones, and other content from being copied, modified, transferred or forwarded.

Select Menu > Media > RealPlayer.

RealPlayer can play video clips and audio files that are

stored in the device memory or on a memory card, transferred to your device from e-mail or compatible PC, or streamed to your device over the Web.

Formats supported by RealPlayer include MPEG-4, MP4 (not streaming), 3GP, RV, RA, AAC, AMR, and Midi.RealPlayer does not necessarily support all variations of a media file format.

Tip: Streaming audio and video files means playing them directly from the Web without downloading them first to your device.

Play video clips and stream links

To select audio and video files to play with RealPlayer, select Options > Open, and scroll to a media clip in your device or on a memory card.

To play streaming media, select a Web link that points to a media clip, and select Play; or connect to the Web, browse to a video clip or audio file, and select Play.

RealPlayer recognizes two kinds of links: an rtsp:// URL

and an http:// URL that points to a RAM file. Before the content begins streaming, your device must connect to a Web site and buffer the content. If a network connection problem causes a playback error,

RealPlayer attempts automatically to reconnect to the

Internet access point.

To save a media clip, select Options > Save, scroll to a folder in device memory or on a memory card, and select Save. To save a link to a media file on the Web, select Save link.

To fast-forward or rewind the clip during playback, scroll up or down.

To increase or decrease the volume during playback, scroll right or left.

Settings

Select Menu > Media > RealPlayer > Options > Settings.

Video settings

Select Video > Loop > On, if you want to replay video clips automatically after they finish playing.

Connection settings

Select Connection, scroll to the following settings, and press the joystick to edit:

• Proxy — Select whether to use a proxy server and to key in the proxy server's IP address and port number.

• Network — Change the access point to connect to the Internet and to set the port range used when connecting.

Proxy settings

Proxy servers are intermediate servers between media servers and their users. Some service providers use

them for additional security or to speed up access to Web pages that contain media files.

Contact your service provider for the correct settings. Select Connection > Proxy, scroll to the following

settings, and press the joystick to edit:

• Use proxy — Select Enable to use a proxy server.

• Proxy serv. address — Enter the IP address of the

proxy server. This setting is only available if you select to use a proxy server.

• Proxy port number — Enter the port number of the proxy server. This setting is only available if you select to use a proxy server.

Network settings

Contact your service provider for the correct settings. Select Connection > Network, scroll to the following

settings, and press the joystick to edit:

• Default access point — Scroll to the access point to connect to the Internet, and press the joystick.

• Online time — Set the time when RealPlayer disconnects from the network when you pause a media clip that plays using a network link. Select

User defined, and press the joystick. Enter the time,

and select OK.

• Lowest UDP port — Enter the lowest port number of the server port range. The minimum value is 1024.

• Highest UDP port — Enter the highest port number of the server port range. The maximum value is

65535.

Media applications

Music player

Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

Select Menu > Media > Music player. With the music player, you can play music files and

create and listen to track lists. The music player supports files with extensions such as MP3 and AAC.

Media applications

Listen to music

Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing.

To select a music track, select Options > Music library.

All tracks lists all music on your device. To view sorted

songs, select Albums, Artists, Genres, or Composers. To play a track, scroll to the track, and select Options >

Play. When a track is playing, to change between play

and pause, press

After you add or remove music files in the device, update your Music library. Select Options > Update

Music library. The player searches the device memory

for music files and updates them to the Music library.

To select the previous or next track, scroll the joystick up or down.

To play the music tracks repeatedly, select Options >

Loop. Select All to repeat all the tracks in the current

and . To stop a track, press .

folder, One to repeat the selected track, or Off to set off the repeating.

To play music in random order, select a folder and

Options > Random play.

To view music track information, scroll to the desired track and select Options > View details.

Adjust music volume

To control the music volume, scroll left or right. To mute the volume, scroll left until the volume is muted.

Track lists

You can create a new track list and add tracks to it, or select a saved track list.

To create a new track list, select Options > Music

library > Track lists > Options > New track list. Write the

name of the new track list, and select OK.

To add a track to a track list, open the track list, and select Options > Add tracks.

Equalizer

Select Menu > Media > Music player > Options >

Equaliser.

You can personalize the sound of your music files with

Equaliser. You can use preset frequency settings based

on styles of music, like classical or rock. You can also create customized settings based on your own listening preferences.

You cannot use other functions of Music player while

Equaliser is open.

With Equaliser, you can enhance or diminish frequencies during music playback and modify how your music sounds. There are preset frequency settings in your device, for example, Classical and Rock.

To use a preset frequency setting when playing music, scroll to the frequency setting you want to use, and select Options > Activate.

Create your own frequency setting

1. To create your own frequency setting, select

Options > New preset.

2. Enter a name for the preset frequency setting, and select OK.

3. Scroll up or down to move between the frequency bands and set the frequency on each band. To move between bands, scroll left or right.

4. Select Back to save the new frequency setting or select Options > Reset to defaults to set the bands at a neutral frequency and start over.

Voice recorder

Select Menu > Media > Recorder. With Recorder, you can record up to 60 seconds of a

voice memo, save the voice recording as a sound clip, and play the sound clip. Recorder supports the AMR format.

To record a voice memo, select Options > Record sound

clip. Select Pause to pause the recording and Record to

resume recording . When you finish recording, select

Stop. The sound clip is automatically saved.

The maximum length of a voice recording is 60 seconds, but it also depends on the storage space available in device memory or on a memory card.

Play a voice recording

To listen to a voice recording that you just recorder, select the play icon. (

The progress bar displays the playing time, position, and length of a voice recording.

To pause playback of a voice recording, select Pause. Playback resumes when you select Play.

Voice recordings that you receive or record are temporary files. You must save the files that you want to keep.

). Select Stop to cancel playback.

Flash player

Select Menu > Media > Flash Player. With Flash Player, you can view, play, and interact with

flash files made for mobile devices. The flash files originally designed for the portrait mode

may not fully support the landscape mode of your device. For example, the command text may be on the bottom of the display and not directly next to the selection keys.

To open a folder or play a flash file, scroll to the folder or file, and press the joystick.

Media applications

To send a flash file to compatible devices, scroll to it, and press the call key. Copyright protection may prevent the sending of some flash files.

To switch between flash files saved on your device memory or memory card, scroll left or right.

The available options may vary.

Media applications

Camera

When taking and using images or video clips, obey all laws, and respect local customs as well as privacy and legitimate rights of others.

You can take photos or record video clips with the builtin camera. The camera lens is on the back of the device, and the display works as a viewfinder. The camera produces pictures in .jpeg format and video clips in . 3gpp format.

Take a picture

1. Select Menu > Media > Camera. The Nokia E70 device supports an image capture

resolution of up to 1600 x 1200 pixels. The image resolution in these materials may appear different.

2. Use the display as a viewfinder, aim at your subject, and press the joystick. The device saves the photo in the default folder, or in the folder you have defined.

Tip: To zoom in or out before taking a picture, scroll up or down.

3. If you do not want to keep the saved photo, select

Options > Delete. Select Back to return to the

viewfinder to take another picture. Select Options >

Go to Gallery to view the photo in Gallery.

If the light is dim, select Options > Night mode after you have opened Camera but before taking a picture.

To adjust the image, select Options > Adjust > White

balance or Colour tone.

To take pictures in a sequence, select Options >

Sequence mode. The camera takes six pictures in a row.

To take timed pictures, select Options > Self-timer, select the desired timeout, and press Activate. The camera takes a picture after the timeout has passed.

Tip: You can view and modify photos in Menu >

Media > Gallery > Images.

Record a video clip

1. Select Camera, and scroll right to activate the video recorder.

2. To start recording a video clip, press the joystick.

3. The remaining recording time is shown on the top of the display. To pause the recording, select

Pause; to resume the recording, select Continue.

4. To stop the recording, select Stop. The device saves the clip in the default folder, or in the folder you have defined.

5. If you do not want to keep the saved video clip, select Options > Delete. Select Back to return to the viewfinder to record another video clip. Select

Options > Play to view the video clip in the RealPlayer application.

Camera

Insert pictures into messages

Camera

When you are creating a new multimedia message, you can open the camera to insert a new picture into the message.

To insert a picture into a multimedia message, select

Options > Insert new > Image. The viewfinder shows

you the image to be captured. To take a picture, press the joystick. To insert the picture in the message, press the joystick.

Insert videos into messages

When you are creating a new multimedia message, you can open the camera to insert a new video into the message.

To insert a video into a multimedia message, select

Options > Insert new > Video clip. Press the joystick to

start recording. To insert the video in the message, select Options > Select.

Settings

To edit the image settings, select Options > Settings >

Image, and define the following:

• Image quality — Define how much the picture is compressed when being saved. High provides the best image quality, but takes more memory.

Normal is the default quality setting. Basic takes the

least amount of memory.

• Show captured img. — Select whether you want the captured image to be displayed after the capture.

• Image resolution — Select the resolution of the images you capture.

• Default image name — Select Date or Text for the default title assigned to a picture. Date assigns the date of the capture as the title. Text assigns the term you define and a number to the picture.

• Memory in use — Select the memory to use for storing images: Phone memory or Memory card.

To edit the video settings, select Options > Settings >

Video, and define the following:

• Length — Select the length of the video clips that you record. The maximum length of a video clip depends on the available memory.

• Video resolution — Select the resolution to use

during video recording. The default setting for the resolution is always the lowest setting.

• Default video name — Select Date or Text for the default title assigned to a recorded video. Date assigns the date of the recording as the title. Text assigns the term you define and a number to the recorded video.

• Memory in use — Select the memory to use for storing recorded videos: Phone memory or Memory

card.

Office applications

Select Menu > Office. Some office applications are not available in all

languages. Opening a large file may not be possible or it may take

a while.

File manager

With File mgr., you can manage the contents and properties of files and folders. You can open, create, move, copy, rename, and search for files and folders. Copyright protection may prevent sending some files.

Documents

You can open, edit, and save documents created with Microsoft Word for Windows versions 97 or later. Note that not all features and formatting of the original files are supported.

Select Menu > Office > Docum..

To open an existing document, browse for the folder and document, and press the joystick. To read the document, select the middle view.

Tip: To open a recently used document, select

Options > Most recent files, select the

document, and press the joystick.

To create a new document, select Options > New file. Select Blank to create a new document without using a template or Use template to create a document based on an existing template.

To read a document, select the middle view and

Options. You can browse for different types of objects

in the document, zoom in or out, switch between full and normal screen views, or view objects, such as images. You can also search for text and edit application settings such as zooming, scrolling, and handling of invisible characters.

Tip: To switch between full and normal screen views in an open document, press *. To zoom in, press 5, and to zoom out, press 0.

View objects in a document

To view all objects, such as tables, comments, workbooks, and video clips in their place in the document, select the middle view and Options >

Browse > Pages and objects.

To open a table or comment, scroll to the object or its icon, and press the joystick twice.

To open an image or go to a hyperlink or reference, scroll to the object, and press the joystick three times.

Office applications

Edit documents

To be able to edit a document, you must activate the edit mode: select the middle view and Options > Edit

document. Select Options > Format, and the

appropriate formatting option. For example, you can add bold, italic, and underline formatting, change the font size and color, and add bullets. You can also modify the paragraph settings such as text alignment and line spacing.

Office applications

Tip: To cancel an action in the editing mode, select Options > Undo.

To insert a new object to the document, select

Options > Insert object. Scroll to the desired object type,

and select Options > Insert. If you want to insert a new document, workbook, or presentation, select Insert

new. To insert an existing document, workbook,

presentation, select Insert existing.

To format the style settings of a paragraph, select

Options > Format > Style. Select the style you want to

format and Options > Edit. Select New style to add a new style. In the style editing view, select Options >

Format, and the style you want. You can modify the font,

formatting, paragraph, bullet, and border styles.

View document structure

To view the document outline, select the left view. Select Options > Expand or Collapse to show only main chapters or all subchapters. If there are objects in the document, select Options > Display objects or Display

headings to switch between object list and chapter

heading views.

Tip: To open a selected chapter in the normal view, scroll to the chapter, and press the joystick.

Preview the page layout

To preview the page layout, select the view on the right and Options.

Define the following options:

• Normal view — Show the current open page in normal view.

• Pan and zoom — Zoom the page layout view.

• View — Select Full screen or Normal screen to switch

between full screen and normal views.

To zoom the page layout, select the view on the right, scroll to the desired page, and select Options > Pan and

zoom. A black selection frame appears above the page

layout, showing the area to zoom. Select the area and

Options > Zoom.

Select from the following options:

• In or Out — Select In to zoom in one step in the selected area, or Out to zoom out one step in the selected area.

• Fit to screen — Adjust the zoom level to fit the page to the screen width.

• Ratio — Edit the zoom level, enter the zoom ratio between 10 and 999, and select OK.

Find text

To find a piece of text from the document, select

Options > Find, enter the text in the Find: field, and press

the joystick.

To change search options such as case sensitivity and search direction, select Options > Search options.

Table editor

You can view tables created in applications, like documents and MS Word.

To view a table in a file, scroll to the file so that a dotted line appears around it, and press the joystick.

To change the selected cell, scroll up, down, left or right. If the selected cell does not fit into visible area, pressing the joystick pans the whole content first before the cell changes.

To edit the text in a cell, select the cell, and press the joystick. To end editing, press the joystick again.

Select Options and from the following options:

• Zoom — Zoom the table view in, out and to edit a zoom ratio.

• Format — Modify the font style and formatting, paragraphs, bullets, and borders.

• Cell size — Change the size of the cells, rows and columns.

• Cells — Select option to insert, delete, merge or separate cells.

• Copy table — Copy the text of the whole table to the clipboard.

Sheet

Select Menu > Office > Sheet.

To open an existing workbook, browse for the folder where the file is saved, and press the joystick.

To create a new workbook, select Options > New file. Select Blank to create a new file without using any template or Use template to create a file based on an existing template. Select the worksheet in the outline view, and press the joystick to open the file.

Work with worksheets

To insert data into cells, open the worksheet view. Use the joystick to move to the cell, and select Options >

Show cell field > Edit cell field. An upper part editing

field opens. Enter the data, and select Done to finish editing.

To select a range of cells, press and hold the edit key while you scroll right.

To modify the worksheet view, select Options > View. Select from the following options:

• Pan worksheet — Define the size of the visible area of the whole worksheet.

• Full screen — Switch to the full screen view.

• Hide headers — Hide header field and release more

space for the worksheet grid.

• Hide gridlines — Hide gridlines.

To change the font and number formatting, borders, and alignments, select Options > Format and the appropriate option.

Office applications

Work with cells

To insert cells, select the area where you want to insert new cells and Options > Cells > Insert. You can insert cells above (Shift cells down) or to the left (Shift cells

right) of the selected range. If you select only one cell,

only one new cell is inserted. If you select a range of cells, a corresponding range of blank cells is inserted. You can also insert a new row or column.

To delete cells, rows, or columns, select the items you

Office applications

want to delete and Options > Cells > Delete. You can delete an entire row or column. If you select Shift cells

left, the selected cells are deleted, and the cells right of

the selected cells are shifted left. If you select Shift cells

up, the cells below the deleted cells are shifted up.

To insert a function into a cell, select a cell. Select

Options > Insert > Function and a function from the list.

For example, #MIN finds the lowest value in the numeric contents of a selected range of cells, #AVERAGE calculates the average of the values, and #SUM adds the values together. Once you have selected a function, press the joystick. The function is inserted into the selected cell. On the worksheet, enter the cells you want to include in the function inside the brackets, and press the joystick.

Tip: Before inserting a function, verify that

Options > Show cell field > Edit grid is active

and that the selected cell is empty or starts with =.

Create and modify charts

When you change the information on a worksheet, the chart is updated simultaneously.

To open a chart, open the outline view, select the worksheet and chart, and press the joystick. If charts are not visible, select Options > Expand.

To create a new chart, select the worksheet cells that contain the information you want to include in the chart and Options > Insert > Chart. To change the general appearance of an existing chart, open a chart view. Select Options > View > Chart. You can change the name of the chart and define the cell area. You can change the type of the chart, and make the chart two or three-dimensional or change the color of the background and axis. Scroll right to add a title to the chart and axis.

To format a chart in more detail, open a chart view. Select Options > View and the object you want to edit. You can change the series, X-axis, and Y-axis settings (such as the tick marks of either axis).

Presentation

You can open, view, edit, and save presentations created with Microsoft PowerPoint 97 or later. You can also create new presentations. Note that not all features and formatting of the original files are supported.

Select Menu > Office > Presentat..

To open an existing presentation, browse for the folder and file, and press the joystick.

To create a new presentation, select Options > New

file. Select Blank to create a new presentation without

using a template or Use template to create a presentation based on an existing template.

View slide shows

To start a slide show, select Options > Presentation. Select from the following options:

• Manual — Move from one slide to another manually.

• Slide show — Move from one slide to another

manually, or use the automatic slide switching. You must specify the duration for a slide.

• Manual looped — The slide show continues from the beginning when the last slide of a presentation has been shown.

• Looped slide show — The slide show continues automatically from the beginning when the last slide of a presentation has been shown.

To move between slides in a slide show, scroll up to display a previous slide and down to display the next slide.

To end the slide show, press the right selection key.

Work with different views

The presentation application consists of different views that help you when reading and creating presentations.

To switch between the different views, scroll right and left with the joystick.

Layout view

To open the layout view, select the view in the middle. To enable or disable the visibility of charts, comments, tables, images, and shapes, select Options > Settings, scroll to the settings item, and press the joystick.

Outline view

The outline view is used to navigate through long presentation documents. The view enables fast vertical scrolling, rearranging of slides, and editing of objects.

To open the outline view, scroll to the view on the left. In the outline view, each slide has its own main level entry. Under the main level there is a sublevel for each text field and object.

To view the slide content, select Options > Expand. To hide the content, select Options > Collapse. To collapse or expand all entries, select Options > View > Collapse

all or Expand all.

To change the order of slides, scroll to the slide you want to move, and select Options > Slide > Move. Scroll up and down to select a new location, and select OK.

Notes view

In the notes view, you can read notes that are attached to slides in the presentation. You can also add your own notes.

To open the notes view, scroll to the view on the right. Each slide has its own main level entry. Under the main level there is a sublevel for notes. If notes are not visible,

Office applications

select Options > View > Expand all. To edit a note, scroll to the note, and press the joystick.

Edit presentations

To edit a presentation, open the layout view, and select

Options > Edit slide. Scroll right or down with the

joystick to move forward and left or up to move backward. Select Options.

Office applications

Define the following options:

• Add title, Add subtitle, Add text, Insert table, Insert

image — Add a new text or object inside the selected

area.

• Edit text, Edit table, Edit document, Edit

workbook — Edit the selected object.

• Edit object — Select Move to move the object, scroll to the item, and press the joystick. Select Resize to change the size of the object. Scroll right and left to change the horizontal size of the object and up and down to change the vertical size. To accept the changes, press the joystick. Select Rotate to rotate the object. Scroll right to rotate the object clockwise and left to rotate counterclockwise. To accept the changes, press the joystick. Select Properties to edit text, line, border, or background properties of the object.

• Object — Delete, copy, paste, or add a link to the selected object.

• Object position — Change the layered position of the selected object in the presentation: up, down, front, or back.

• Insert — Add a new text box, image, shape, table, or

comment to the presentation.

• Undo, Redo — Withdraw the latest modifications.

Find text in a presentation

To find a piece of text from in the presentation, select any of the views. Select Options > Find, enter the text in the Find: field, and press the joystick.

To change the search option for case and whole words, select Options > Search options.

Screen export

You can show the screen of the device to an audience with a compatible data projector, or other compatible projection system. The screen content is transferred to the data projector using, for example, a Bluetooth connection.

Select Menu > Office > Screen export. To be able to show screen content with a compatible

data projector, you must install the drivers of the data projector. For more information, check with the data projector manufacturer or its representative.

Not all applications support this feature. You can start the external viewer in two ways: from the Office folder or inside an application that supports it.

Show screen content

To show screen content with a data projector, open the screen export application, and select Options > Select

device. In the list of available devices, scroll to the device

you want to use, and select OK. Select Options >

Enable to show screen content.

To hide the screen content, select Options > Hide. The screen exporter application is moved to the background.

To stop showing screen content, select Options >

Disable.

Print a message or file from the device. Preview a print job, define page layout options, select a printer, or pr int to a file.

Before you print, make sure that your device is properly connected to the printer.

To print a message or file, open the message or file, and select Options > Printing options.

Define the following options:

• Printer — Select an available printer from the list.

• Print — Select All pages, Even pages, or Odd pages

as the print range.

• Print range — Select All pages in range, Current

page, or Defined pages as the page range.

• Number of copies — Select the number of copies to print.

• Print to file — Select to print to a file and determine the location for the file.

You may not be able to print all messages, such as multimedia messages or other special message types.

To preview a file or message before you print, select

Options > Printing options > Preview.

To change the page layout before printing, select

Options > Printing options > Page setup and from the

following tabs:

• Paper size — Change the paper size or orientation and customize the height and width.

• Margins — Change the size of the left, right, top, or bottom margins.

• Header — The maximum length of the header is 128 characters. You can set the distance from the header to the text and choose to include the header on the first page of the document.

• Footer — The maximum length of the footer is 128 characters. You can set the distance from the footer to the text.

To add or delete a printer, select Menu > Office >

Printers > Options > Add or Delete.

Office applications

Settings

Select Menu > Tools > Settings. You can define and modify various settings of your

device. Modifying these settings affects the operation of your device across several applications.

Some settings may be preset for the device or sent to you in a configuration message by your network operator or service provider. You may not be able to change such settings.

Scroll to the setting that you want to edit, and press the joystick to do the following:

• Switch between two values, such as on or off.

• Select a value from a list.

• Open a text editor to enter a value.

• Open a slider to decrease or increase the value by

scrolling left or right.

Phone settings

Select Phone to change the language settings, standby mode settings, and display settings of your device.

General settings

Select General and from the following:

• Phone language — Select a language from the list.

Changing the device language affects every

application in your device. When you change the language, the device restarts.

• Writing language — Select a language from the list. Changing the writing language also affects the characters that are available when writing text and the predictive text dictionary that is used.

• Predictive text — Select On to use predictive text input. The predictive text dictionary is not available for all languages.

• Welcome note / logo — Select Default to use the default image, Text to enter a welcome note of your own, or Image to select an image from the Gallery. The welcome note or image is displayed briefly each time you switch on the device.

• Orig. phone settings — Restore the original device settings. To do this, you need your device lock code. After resetting, the device may take a longer time to power on. Documents, contact information, calendar entries, and files are unaffected.

Standby mode settings

Select Standby mode and from the following:

• Active standby — Select On to have shortcuts to different applications available in the active standby mode.

• Left selection key, Right selection key — Change the shortcuts that open from the left and right selection keys in the standby screen.

• Navigation key right, Navigation key left, Navigat.

key down, Navigation key up, Selection key — Change the shortcuts that open when you

scroll to different directions. These settings are not available if you select Active standby > On.

Display settings

Select Display and from the following:

• Light sensor — Adjust the amount of light required to illuminate the device display.

• Power saver time-out — Select the amount of time before the screen saver is activated. Activating the screen saver lengthens the device operating time.

• Light time-out — Set how quickly after last keypress the display dims.

Call settings

Select Call and from the following:

• Send my caller ID — Select Yes to display your phone number to the person you are calling or Set by

network to let the network to determine whether

your caller ID is sent.

• Send my net call ID — Set this feature on if you want to display your net caller ID to the person you are calling.

• Call waiting — Select Activate to be n oti fi ed o f a n ew incoming call while you have a call in progress or

Check status to check if the function is active on the

network.

• Internet call waiting — Activate this feature to be notified of a new incoming call while you have a net call in progress.

• Internet call alert — Set this on if you want the device to respond to the caller that it is busy. If you set this off, the device emits a busy tone to the caller and you receive a notification about the missed call.

• Default call type — Select Cellular to make normal calls to the phone number or Internet to use VoIP to call the number or address.

• Reject call with SMS — Select Yes to send a text message automatically to the person who is calling you informing why you cannot answer their incoming call.

• Message text — Enter the text that is sent when you cannot answer an incoming call and want to automatically send a text message as a reply.

• Image in video call — Select Use selected to select a still image to be displayed instead of a video during a video call or None to not send any image during a video call.

• Automatic redial — Select On to redial a number if it was busy at the first call attempt. Your device makes a maximum of 10 attempts to connect the call.

• Summary after call — Select On to briefly display the approximate duration of the last call.

• Speed dialling — Select On to activate speed dialing on your device. To dial a phone number assigned to the speed dialing keys (2-9), press and hold the key.

See "Speed dial," p. 26.

• Anykey answer — Select On to answer an incoming call by briefly pressing any key, except the end key.

• Line in use — Select Line 1 or Line 2 to change the phone line for outgoing calls and text messages

Settings

(network service). This setting is displayed only if th e SIM card supports the alternate line service and a subscription to two phone lines.

• Line change — Select Disable to prevent line

Settings

selection (network service). To change this setting, you need the PIN2 code.

• Internet call alert — Select Off to notify incoming net calls that your device is busy or On to accept incoming net calls.

Connection settings

Select Menu > Tools > Settings > Connection and from the following:

• Access points — Set up new or edit existing access points. Some or all access points may be preset for your device by your service provider, and you may not be able to create, edit, or remove them.

• Access point groups — Set up new or edit existing access point groups that are used in automatic connection establishment and e-mail roaming.

• Packet data — Determine when packet data connections are used, and enter the access point if you use your device as a modem for a computer.

• Internet tel. settings — Define settings for net calls.

• SIP settings — View or create session initiation

protocol (SIP) profiles.

• Data call — Set the time-out period after which data call connections automatically end.

• VPN — Install and manage VPN policies, manage VPN policy servers, see the VPN log, and create and manage VPN access points.

• Wireless LAN — Determine if the device displays an indicator when a wireless LAN is available, and how often the device searches for networks.

• Configs. — View and delete trusted servers from which your device may receive configuration settings.

To obtain information about wireless LAN or subscribing to a packet data service and the appropriate connection and configuration settings, contact your network operator or service provider.

The settings available for editing may vary.

Access points

Select Menu > Tools > Settings > Connection > Access

points.

An access point is where your device connects to the network by way of a data connection. To use e-mail and multimedia services or to browse web pages, you must first define access points for these services.

An access point group is used for grouping and prioritizing access points. An application can use a group as a connection method instead of a single access point. In that case, the best available access point inside a group is used for making the connection, and in case of e-mail, also for roaming.

Some or all access points may be preset for your device by your service provider, and you may not be able to create, edit, or remove them.

See "Internet access points," p. 56.

Access point groups

Select Menu > Tools > Settings > Connection > Access

point groups.

An access point group is used for grouping and prioritizing access points. An application can use a group as a connection method instead of a single access point. In that case the best available access point inside a group is used for making connection and in case of email, also for roaming. See "Access point groups," p. 66.

Packet data

Select Menu > Tools > Settings > Connection > Packet

data.

Your device supports packet data connections, such as GPRS in the GSM network. When you are using your device in GSM and UMTS networks, it is possible to have multiple data connections active at the same time; access points can share a data connection, and data connections remain active (for example, during voice calls). See "Connection manager," p. 64.

Packet data settings

The packet data settings affect all access points using a packet data connection.

Select from the following:

• Packet data conn. — Select When available to register the device to the packet data network when you switch the device on in a supported network. Select When needed to establish a packet data

connection only when an application or action requires it.

• Access point — Enter the access point name provided by your service provider to use the device as a packet data modem to your computer.

These settings affect all access points for packet data connections.

Net call settings

Select Menu > Tools > Settings > Connection > Internet

tel. settings. Select Options > New profile or Options > Edit.

Scroll to Name, press the joystick, enter a name for the profile, and select OK.

Scroll to SIP profiles, press the joystick, select a profile and OK. SIP protocols are used for creating, modifying, and terminating communications sessions such as net calls with one or more participants. SIP profiles include settings for these sessions.

To save your settings, press Back.

Data call settings

Select Menu > Tools > Settings > Connection > Data

call.

To set the time-out period after which data calls automatically end if no data has been transferred, select Online time, and press the joystick. Select User

defined to enter the time yourself or Unlimited to keep

the connection active until you select Options >

Disconnect.

Settings

VPN

VPN access points

To manage VPN access points, select VPN > VPN access

Settings

points > Options, and from the following:

• Edit — Edit the selected access point. If the access point is in use or its settings are protected, you cannot edit it.

• New access point — Create a new VPN access point.

• Delete — Delete the selected access point.

VPN access point settings

Contact your service provider for the correct access point settings.

To edit VPN access point settings, select the access point and Options.

Select from the following:

• Connection name — Enter a name for the VPN connection. The maximum length of the name is 30 characters.

• VPN policy — Select a VPN policy to be used with this access point.

• Internet access pt. — Select the Internet access point to be used with this VPN access point.

• Proxy serv. address — Enter the proxy server address

of this VPN access point.

• Proxy port number — Enter the number of the proxy port.

Wireless LAN

Select Menu > Tools > Settings > Connection > Wireless

LAN.

To have an indicator displayed when there is a wireless LAN available in your current location, select Show

availability > Yes.

To select the time interval for your device to scan for available wireless LANs and update the indicator, select

Scan for networks. This setting is not visible unless you

select Show availability > Yes.

Advanced WLAN settings

Select Menu > Tools > Settings > Connection > Wireless

LAN > Options > Advanced settings. The wireless LAN

advanced settings are normally defined automatically, and changing them is not recommended.

To edit the settings manually, select Automatic

config. > Disabled, and define the following:

• Long retry limit — Enter the maximum number of transmission attempts if the device does not receive a receiving acknowledgement signal from the network.

• Short retry limit — Enter the maximum number of transmission attempts if the device does not receive a clear-to-send signal from the network.

• RTS threshold — Select the data packet size at which the wireless LAN access point device issues a request to send before sending the packet.

• TX power level — Select the power level of your device when sending data.

• Radio measurements — Enable or disable the radio measurements.

To restore all settings to their original values, select

Options > Restore defaults.

Security settings for wireless LAN access points

WEP security settings Select Menu > Tools > Settings > Connection > Access

points. Select Options > New access point, or select an

access point and Options > Edit. In the access point settings, select WLAN security

mode > WEP.

Wired equivalent privacy (WEP) encryption method encrypts data before it is transmitted. Access to the network is denied to users who do not have the required WEP keys. When WEP security mode is in use, if your device receives a data packet not encrypted with the WEP keys, the data is discarded.

In an Ad-hoc network, all devices must use the same WEP key.

Select from the following:

• WEP key in use — Select the desired WEP key.

• Authentication type — Select Open or Shared.

• WEP key settings — Edit the settings for the WEP key.

WEP key settings Select Menu > Tools > Settings > Connection > Access

points. Select Options > New access point, or select an

access point and Options > Edit.

In the access point settings, select WLAN security

mode > WEP.

In an Ad-hoc network, all devices must use the same WEP key.

Select WLAN security sett. > WEP key settings and from the following:

• WEP encryption — Select the desired WEP encryption key length.

• WEP key format — Select whether you want to enter the WEP key data in ASCII or Hexadecimal format.

• WEP key — Enter the WEP key data.

802.1x security settings

Select Menu > Tools > Settings > Connection > Access

points. Select Options > New access point, or select an

access point and Options > Edit. In the access point settings, select WLAN security

mode > 802.1x.

802.1x authenticates and authorizes devices to access

a wireless network, and prevents access if the authorization process fails.

Select WLAN security sett.. and from the following:

• WPA mode — Select EAP (Extensible Authentication Protocol) or Pre-shared key (a secret key used for device identification).

• EAP plug-in settings — If you selected WPA mode >

EAP, select which EAP plug-ins defined in your device

to use with the access point.

• Pre-shared key — If you selected WPA mode > Pre-

shared key, enter the shared private key that

identifies your device to the wireless LAN to which you connect.

Settings

The settings available for editing may vary. WPA security settings Select Menu > Tools > Settings > Connection > Access

points. Select Options > New access point, or select an

Settings

access point and Options > Edit. In the access point settings, select WLAN security

mode > WPA/WPA2.

Select WLAN security sett.. and from the following:

• WPA mode — Select EAP (Extensible Authentication Protocol) or Pre-shared key (a secret key used for device identification).

• EAP plug-in settings — If you select WPA mode >

EAP, select which EAP plug-ins defined in your device

to use with the access point.

• Pre-shared key — If you select WPA mode > Pre-

shared key, enter the shared private key that

identifies your device to the wireless LAN to which you connect.

• TKIP encryption — To enable TKIP encryption, based on transient keys changed often enough to prevent misuse, select Allowed. All devices in the wireless LAN must either allow or prevent the use of TKIP encryption.

The settings available for editing may vary. EAP To view the EAP (extensible authentication protocol)

plug-ins currently installed in your device (network service), select Menu > Tools > Settings > Connection >

Access points. Select Options > New access point and

define an access point that uses wireless LAN as a data bearer and 802.1x or WPA/WPA2 as their security mode.

Select WLAN security sett. > WPA mode > EAP, scroll to

EAP plug-in settings, and press the joystick.

EAP settings Select Menu > Tools > Settings > Connection > Access

points. Select Options > New access point, or select an

access point and Options > Edit. Select WLAN security mode > 802.1x or WPA/WPA2. Select WLAN security sett. > WPA mode > EAP, scroll to

EAP plug-in settings, and press the joystick.

The extensible authentication protocol (EAP) plug-ins are used in wireless networks to authenticate wireless devices and authentication servers, and the different EAP plug-ins make possible the use of various EAP methods (network service).

To use an EAP plug-in when you connect to a WLAN using the access point, select the desired plug-in and

Options > Enable. The EAP plug-ins enabled for use with

this access point have a check mark next to them. To not use a plug-in, select Options > Disable.

To edit the EAP plug-in settings, select Options >

Configure.

To change the priority of the EAP plug-in settings, select

Options > Raise priority to attempt to use the plug-in

before other plug-ins when connecting to the network with the access point, or Options > Lower priority to use this plug-in for network authentication after attempting to use other plug-ins.

The available options may vary. See the device help for more information on EAP

plugins.

Configurations

To view and delete configurations for trusted servers, select Menu > Tools > Settings > Connection >

Configs..

You can receive messages from your network operator, service provider, or company information management that contain configuration settings for trusted servers. These settings are automatically saved in Configs.. You may receive configuration settings for access points, multimedia or e-mail services, and IM or synchronization settings from trusted servers.

To delete configurations for a trusted server, scroll to the server, and press the clear key. The configuration settings for other applications provided by this server are also deleted.

Date and time settings

See "Clock settings," p. 97.

Security settings

See "Define security settings," p. 33.

Enhancement settings

Select Menu > Tools > Settings > Enhancement.

Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety.

With most enhancements, you can select from the following settings:

• Default profile — Select the profile that is activated when you attach an enhancement to your device.

• Automatic answer — Let the device answer phone calls automatically when an enhancement is attached. Select On to have the device answer an incoming call automatically after 5 seconds. If the ringing type is set to Beep once or Silent in the Profiles menu, automatic answer is disabled.

• Lights — Select On to illuminate the device while it is attached to an enhancement.

Settings

Organiser

Select Menu > Organiser.

Organiser

Organiser includes tools that help you organize and

manage the details of different events in your personal and business life.

Calendar

Select Menu > Organiser > Calendar. In Calendar, you can create and view scheduled events

and appointments. You can also set alarms for calendar entries.

You can synchronize your calendar data with a compatible computer using Nokia PC Suite. For information on synchronization, see the PC Suite guide.

Create calendar entries

You can create four types of calendar entries:

• Meeting entries have a specific date and time.

• Memo entries are related to the whole day but not

to a specific time of the day. Memo entries do not appear in the weekly time schedule view.

• Anniversary entries remind you of birthdays and special dates. They refer to a certain day but not a specific time of the day. Anniversary entries are

repeated every year.

• To-do note entries remind you of a task that has a due date but not a specific time of the day.

To create a calendar entry, scroll to a date, and select

Options > New entry. Select an entry type. Available

settings for meeting, memo, anniversary, and to-do entries vary.

To open and edit an existing entry, scroll to the entry, and select Options > Open. Edit the details in the various fields.

Tip: When you edit or delete a repeated entry, choose how you want the change to take effect. If you select All calendar entries deleted, all repeated entries are deleted. If you select

Delete entry, only the current entry is deleted.

To-do

You can create and maintain a task or list of tasks that must be done by a certain day. Each task can be assigned a due date, but not a specific time of the day.

To open the list of to-do notes, select Options > To-do

list.

To add a to-do note, select Options > New entry > To-

do. Start to write the task in the Subject field. You can

set a due date for the task, and specify a priority. The priority icons are ( ! ) High and ( - ) Low. There is no icon for Normal.

To mark a task as completed, scroll to the task in the todo list, and select Options > Mark as done.

To restore a task, scroll to it in the todo list, and select

Options > Mark as not done.

Calendar views

To switch between the different calendar views, select

Options in any calendar view. Select a type of view from

the list. To set the default calendar view, select Options >

Settings > Default view > Month view , Week view, Day view, or To-do view.

To view a specific date in the calendar view, select

Options > Go to date. Enter the date, and select OK.

Add a received calendar entry to your calendar

You can receive a calendar entry as an attachment to a multimedia or e-mail message.

To add a received calendar entry to your calendar, open the calendar entry attachment in the message, and select Options > Save to Calendar. The entry is added to your default calendar.

Notes

Select Menu > Organiser > Notes.

You can create and send notes to other compatible devices, and save plain text files (.txt format) that you receive to Notes.

To write a new note, select Options > New note, write the text and press Done.

Calculator

Note: This calculator has limited accuracy and is

designed for simple calculations. Select Menu > Organiser > Calculator.

To make a calculation, enter the first number of the calculation. Scroll to and select a function such as add or subtract from the function map. Enter the second number of the calculation, and select =. To add a decimal point, press #.

The calculator performs operations in the order they are entered. The result of the calculation remains in the editor field and can be used as the first number of a new calculation.

To save the results of a calculation, select Options >

Memory > Save. The saved result replaces the previously

stored number in memory.

To retrieve the results of a calculation from memory and use them in a calculation, select Options > Memory >

Recall.

To view the last saved result, select Options > Last

result.

Exiting the calculator application or turning off the device does not clear the memory. You can recall the

Organiser

last saved result the next time you open the calculator application.

Converter

Organiser

Select Menu > Organiser > Converter. The converter has limited accuracy, and rounding errors

may occur.

Convert measurements

1. Scroll to the Type field, and select Options >

Conversion type to open a list of measures. Scroll to

the measure you want to use, and select OK.

2. Scroll to the first Unit field, and select Options >

Select unit. Select the unit from which you want to

convert, and select OK. Scroll to the next Unit field, and select the unit to which you want to convert.

3. Scroll to the first Amount field, and enter the value you want to convert. The other Amount field changes automatically to show the converted value.

Press # to add a decimal and * for + and - (for temperature), and E (exponent) symbols.

Set base currency and exchange rate

Before you can make currency conversions, you must choose a base currency and add exchange rates. The rate of the ba se currency is alw ays 1. The base cur rency determines the conversion rates of the other currencies.

1. To set the rate of exchange for the unit of currency, scroll to the Type field, and select Options > Currency

rates.

2. A list of currencies opens, and you can see the current base currency at the top. Scroll to the currency type and enter the exchange rate you would like to set per single unit of currency.

3. To change the base currency, scroll to the currency, and select Options > Set as base curr..

4. Select Done > Yes to save the changes.

After you have inserted all the necessary exchange rates, you can make currency conversions.

Voice mailbox

Select Menu > Organiser > Voic. mail. When you open the voice mailbox application for the

first time, you are asked to enter the number of your voice mailbox. To change the number, select Options >

Change number. To call the number, select Options > Call voice mailbox.

Note: Wh en yo u ch an ge b ase cu rre ncy , y ou m ust enter new exchange rates because all previously set exchange rates are cleared.

Clock

Select Menu > Clock.

Clock settings

If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger.

To change the clock type, select Options > Settings >

Clock type > Analogue or Digital.

To set an alarm, select Options > Set alarm. Enter the alarm time, and select OK.

To view and change alarms, select Reset alarm.

To remove an alarm, select Remove alarm. Date and time settings To change the date and time, their display formats,

alarm tone, and to define whether you want to use automatic time update, select Options > Settings and from the following:

• Time — Enter the time, and select OK.

• Time zone — Enter the time zone, and select OK.

• Date — Enter the date, and select OK.

• Date format — Change how the date is displayed.

Scroll to the desired format, and select OK.

• Date separator — Change the symbol that separates days, months, and years. Scroll to the symbol you want, and select OK.

• Time format — Select 24-hour or 12-hour.

• Time separator — Select the symbol that separates

hours and minutes.

• Clock type — Select Analogue or Digital.

• Clock alarm tone — Select the tone that you want to

use for the alarm clock.

• Network operator time — Update time, date, and time zone information automatically (network service). Select Auto-update to activate. This service may not be available in all networks.

Add and delete cities

To add a city, scroll right, and select Options > Add

city. Scroll to a city, and select Options > Select.

Tip: To search for a city in the Cities list, select

Options > Add city > Options > Find. Enter the

city name in the search field.

To delete a city, scroll right, scroll to the city, and select

Options > Remove.

Changing the home city may change the general system time of your device.

Organiser

Tools

Select Menu > Tools. The Tools folder contains applications used to configure

your device and to configure other applications.

Memory card—See "Memory card," p. 20. Transfer—See "Transfer content between

devices," p. 21.

Profiles—See "Profiles," p. 105. Settings—See "Settings," p. 86.

Positioning

With the positioning service you can receive information from service providers about local issues such as weather or traffic conditions, based on the location of your device (network service).

Select Menu > Tools > Positioning. To select a positioning method, scroll to the positioning

method, and select Options > Enable. To stop using it, select Options > Disable. The Bluetooth positioning method enables you to use Bluetooth GPS enhancements for positioning. The Network based positioning method is provided by your network operator or service provider. Both positioning methods can be used simultaneously.

Navigator

This feature is not designed to support positioning requests for related calls. Contact your service provider for more information about how your phone complies with government regulations on location based emergency calling services.

GPS should not be used for precise location measurement, and you should never rely solely on location data from the GPS receiver.

Select Menu > Tools > Navigator.

Navigator is a GPS application that enables you to view

your current location, find your way to a desired location, and track distance. The application requires a Bluetooth GPS accessory to operate. You must also have Bluetooth GPS positioning method enabled in Menu >

Tools > Positioning.

The application must receive positioning info from at least three satellites to use it as a traveling aid. Changes to this application may affect your privacy, so you must control how it is used.

The application requires a Bluetooth GPS accessory to operate.

Select from the following:

• Navigator — View navigating information to your trip destination.

• Position — View positioning inform ation about your current location.

• Trip dist. — View your traveling information such as the distance and duration you have traveled and your average and maximum speeds.

Landmarks

Select Menu > Tools > Landmarks. Landmarks are coordinates to geographic locations

that you can save to your device for later use in different location-based services. You can create landmarks using a Bluetooth GPS enhancement or network (network service). See "Navigator," p. 98.

To create a landmark, select Options > New landmark. Select Current position to make a network request for the latitude and longitude coordinates of your current location or Enter manually to fill in the necessary location information such as a name, category, addres s, latitude, longitude and altitude.

To delete a landmark, scroll to it, and press the clear key. For more information, see the extended User's Guide on

the Web.

Voice commands

Before using voice tags, note that:

• Voice tags are not language-dependent. They are dependent on the speaker's voice.

• You must say the name exactly as you said it when you recorded it.

• Voice tags are sensitive to background noise. Record voice tags and use them in a quiet environment.

• Very short names are not accepted. Use long names, and avoid similar names for different numbers.

Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.

Select Menu > Tools > Voice commands. Use voice commands to make phone calls and to launch

applications, profiles, or other functions on the device. The device creates a voice tag for the entries in the

contacts list and for the functions designated in the

Voice commands application. When a voice command

is spoken, the device compares the spoken words to the voice tag in the device.

Use a voice command to make a call

The voice tag for a contact is the name or nickname that is saved on the contact card in Contacts. To listen to the voice tag, open a contact card, and select Options >

Playback.

1. To make a call using a voice command, press and

hold the voice key.

2. When you hear the tone or see the visual display,

clearly speak the name saved on the contact card.

3. The device plays a synthesized voice tag for the

recognized contact in the selected device language, and displays the name and number. After a timeout

Tools

of 1.5 seconds, the device dials the number. If the recognized contact was not correct, select Next to

Tools

view a list of other matches or Quit to cancel dialing.

Use a voice command to launch an application

The device creates voice tags for the applications listed in the Voice commands application.

To launch an application using a voice command, press and hold the voice key, and clearly speak the voice command. If the recognized application was not correct, select Next to view a list of other matches or

Quit to cancel.

To add more applications to the list, select Options >

New application.

To change the voice command of an application, scroll to the application, and select Options > Change

command. Type the new voice command, and select OK.

Use voice commands for profiles

The device creates a voice tag for each profile. To set on a profile using a voice command, press and hold the voice key, and say the name of the profile.

To change the voice command, scroll to the desired profile, and select Profiles > Options > Change

command.

Voice command settings

To switch off the synthesizer that plays recognized voice commands in the selected device language, select

Settings > Synthesiser > Off.

To reset voice recognition learning when the main user of the device has changed, select Reset voice adapts..

Voice aid

Select Menu > Tools > Voice aid. The voice aid application allows you to operate the

basic functions of your device without watching the display.

Select from the following:

• Contacts — View the entries in your contacts list.

• Recent calls — View your missed and received calls,

dialed numbers, and frequent calls.

• Voice mailbox — Retrieve your voice messages.

• Dialler — Dial a telephone number.

• Clock — Hear the current time and date.

To hear more options, select Options.

Sett. wizard

Sett. wizard configures your device for operator (MMS,

GPRS, and Internet), e-mail, push-to-talk (network service), and video sharing (network service) settings based on your network operator information.

100

To use these services, you may have to contact your network operator or service provider to activate a data connection or other services.

To edit settings, select Menu > Tools > Sett. wizard and the item you want to configure.

If you are not able to use Sett. wizard, visit the Nokia phone settings Web site at www.nokia.com.

Application manager

Select Menu > Tools > Application manager. When you open the application manager, you see all

the software packages that have been installed, with their name, version number, type, and size. You can view the details of installed applications, remove them from your device, and specify installation settings.

Certificate manager

Important: Note that even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime. If Expired certificate or Certificate not valid yet is shown even if the certificate should be valid, check that the current date and time in your device are correct.

Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner.

Digital certificates are used to verify the origins of software but do not guarantee safety. There are three different types of certificates: authority certificates, personal certificates, and server certificates. During a secure connection, a server may send a server certificate to your device. Upon receipt, it is checked through an authority certificate stored on your device. You receive notification if the identity of the server is not authentic or if you do not have the correct certificate in your device.

Download a certificate from a web site, or receive a certificate as an e-mail attachment, or as a message sent through a Bluetooth or infrared connection. Certificates should be used when you connect to an online bank or a remote server to transfer confidential information. They should also be used if you want to reduce the risk of viruses or other malicious software, and to check the authenticity of software when you download and install software to your device.

Tip: When you add a new certificate, check its authenticity.

Nokia Catalogs

Select Menu > Tools > Catalogs. Select OK if you accept the disclaimer.

Nokia Catalogs (network service) is a mobile content shop available on your device. With Nokia Catalogs you

Tools

101

Nokia RM-10 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual