Service Junction Box JBU-8 has been designed for service use:
- To make connection between transceiver to FLA-5 for flash loading.
- To enable functional tests, making the connection from transceiver to
test devices.
- To generate accurate 4,1V and 8.4V voltage for transceiver.
- To generate accurate 500mA current to charging current calibration.
- To generate 10ms IBI-pulse to BTMP-line
Service Junction Box JBU-8 is only forGo/NoGo testing.
Product Code
Service Junction Box JBU-8:0770186
PAMS Technical Documentation
View of JBU-8
Page 4
Nokia Mobile Phones Ltd.
Issue 1 12/99
Page 5
PAMS Technical Documentation
Module Jig JBS-25
The purpose of the JBS-25 module service jig is to provide a method of
applying voltage from an external power supply when the phone engine is
out of its mechanics.
The engine module of NSW-6 products can be tested with JBS-25.
The jig contains four connector pcbs, keyboard module and assembly
parts.
Module Jig JBS-25:0770185
NSW-6
Service Tools
Note: The nominal supply voltage for the JBS-25 is +4.1V.
The purpose of the JBS-25 module service jig is to provide a method of
applying voltage from an external power supply when the phone engine is
out of its mechanics.
Issue 1 12/99
The supply voltage must not exceed +5.0 V
Nokia Mobile Phones Ltd.
Page 5
Page 6
NSW-6
Service Tools
Service Tool AAX-1
The function of the AAX-1 is to provide galvanic contact for RF
measurements.
Product code
Service Tool AAX-1:0770200
View of AAX-1
PAMS Technical Documentation
Page 6
Nokia Mobile Phones Ltd.
Issue 1 12/99
Page 7
PAMS Technical Documentation
Battery Adapter BDS-6
The Battery Adapter BDS-6 is used along with an external battery capacity
meter to check battery capacity.
Note that Li-ion batteries have an internal protection circuit to prevent
deep discharge.
Product Code
Battery Adapter BDS-6:0750121
View of BDS-6
NSW-6
Service Tools
Issue 1 12/99
Nokia Mobile Phones Ltd.
Page 7
Page 8
NSW-6
Service Tools
Flash Adapter FLA-9
Flash Adapter FLA-9 is used in modifying the contents of the phone Flash
memory, e.g.warranty data transfer.
Product Code
Flash Adapter FLA-9:0770187
View of FLA-9
PAMS Technical Documentation
Page 8
Nokia Mobile Phones Ltd.
Issue 1 12/99
Page 9
PAMS Technical Documentation
Flash Loading Adapter FLA-5 (Sales Pack)
The Flash Loading Adapter FLA-5 is used with the Flash Adapter FLA-9
and Service Cable XMS-3. Power is supplied to the FLA-5 from the Flash
Security Box TDF-4 via the DC cable PCC-1B, (The PCC-1B cable can be
replaced with a Travel Charger ACH-6), and is connected to the Flash
Prommer FPS-4S with the cable AXS-5.
The sales pack includes:
- Flash Loader Adapter FLA-50770085
- Service cable SCH-50730098
- D15 - D15 Cable AXS-50730091
- Installation software for FPS-48400041
Product Code
NSW-6
Service Tools
Flash Loading Adapter FLA-5:0080178
View of FLA-5
Issue 1 12/99
Nokia Mobile Phones Ltd.
Page 9
Page 10
NSW-6
Service Tools
PAMS Technical Documentation
Flash Prommer FPS-4S (Sales Pack)
The Flash Prommer FPS-4S is used to update the main software of the
phone. Updating is done by first loading the new MCU software from the
PC to the flash prommer, and then loading the new SW from the prommer
to the phone. When updating more than one phone in succession, the
MCU software only needs to be loaded to the prommer once.
The sales pack includes:
- Charger ACL-3E0680015
- Printer Cable 0730029
- D9 - D9 Cable AXS-40730090
- Installation software for FPS-48400041
Product Code
Flash Prommer FPS-4S:0085095
View of FPS-4S
Page 10
Nokia Mobile Phones Ltd.
Issue 1 12/99
Page 11
PAMS Technical Documentation
Security Box TDF-4
The Security Box TDF-4 is required for updating MCU software, and infra
red testing.
Note:TDF-4 is delivered in de-activated mode. Fill in the enclosed
Activation Request Form, and fax to NMP Salo to get the
activation code
Product Code
Security Box TDF-4:0770106
View of TDF-4
NSW-6
Service Tools
Issue 1 12/99
Nokia Mobile Phones Ltd.
Page 11
Page 12
NSW-6
Service Tools
Service Audio Box JBA-6
The Service Audio Box JBA-6 is used between the phone or JBS-25 and
test equipment.
Product Code
Service Audio Box JBA-6:0770184
View of JBA-6
PAMS Technical Documentation
Page 12
Nokia Mobile Phones Ltd.
Issue 1 12/99
Page 13
PAMS Technical Documentation
D15-D15 Cable AXS-5
The D15-D15 Cable AXS-5 is used to connect two 15 pin D connectors.
e.g. between FLA-5 and FPS-4S.
Product Code
D15-D15 Cable AXS-5:0730091
View of AXS-5
NSW-6
Service Tools
DC Cable PCC-1B
The DC Cable PCC-1B is used e.g. to connect FLA-5 and TDF-4.
Product Code
DC Cable PCC-1B:0770053
View of PCC-1
Issue 1 12/99
Nokia Mobile Phones Ltd.
Page 13
Page 14
NSW-6
Service Tools
DC Cable SCB-3
The DC Cable SCB-3 is used to connect the Service Box to the charger
connection Vin of the phone when doing the charger calibration service
procedure.
Product Code
DC Cable SCB-3:0730114
View of SCB-3
PAMS Technical Documentation
MBUS Cable DAU-9S
The MBUS Cable DAU-9S has a modular connector, and is used with the
JBS-25.
Product Code
MBUS Cable DAU-9S:0730108
View of DAU-9S
Page 14
Nokia Mobile Phones Ltd.
Issue 1 12/99
Page 15
PAMS Technical Documentation
Power Cable PCS-1
The Power Cable PCS-1 is used to connect the module jigs JBS-25 and
JBU-8 to an external power supply.
Product Code
Power Cable PCS-1:0730012
View of PCS-1
NSW-6
Service Tools
Modular Service Cable XMS-3
XMS-3 is a modular cable for flashing and warranty transfer.
Product code
Service Cable XMS-3:0730174
View of XMS-3
Issue 1 12/99
Nokia Mobile Phones Ltd.
Page 15
Page 16
NSW-6
Service Tools
Service Cable XRC-2
XRC-2 is a modular cable with N connector for RF measurements.
Product code
Service Cable XRC-2:0730180
View of XRC-2
PAMS Technical Documentation
Antenna Removal Tool ART-5
ART-5 is the antenna removal tool.
Product code
Antenna Removal Tool ART-5:0774232
Views of ART-5
Page 16
Nokia Mobile Phones Ltd.
Issue 1 12/99
Page 17
PAMS Technical Documentation
SW Security Device PKD-1
SW security device is a piece of hardware enabling the use of the service
software when connected to the parallel (LPT) port of the PC. Whitout the
dongle present it is not possible to use the service software. Printer or any
such device can be connected to the PC through the dongle if needed.
Caution: Make sure thet you have switched off the PC and the printer
before making connections!
Caution: Do not connected the PKD-1 to the serial port. You may
damage your PKD-1!
Product Code
NSW-6
Service Tools
SW Security Device PKD-1:0750018
View of SW Security Device
Issue 1 12/99
Nokia Mobile Phones Ltd.
Page 17
Page 18
NSW-6
БББББББББББББББББББББББ
БББББББББББББББББББББББ
БББББББББББББББББББББББ
БББББББББББББББББББББББ
БББББББББББББББББББББББ
БББББББББББББББББББББББ
БББББББББББББББББББББББ
БББББББББББББББББББББББ
БББББББББББББББББББББББ
Service Tools
PAMS Technical Documentation
Dongle/Flash Device FLS-2D (Sales Pack)
FLS-2D is a dongle and flash device incorporated into one package,
developed specifically for POS use.
FLS-2D Flash Device.
AXS-4U Cable.
Disk- Installation package,16bit Dongle Drivers.
Disk - Installation package, 32bit Dongle Drivers.
Disk - Installation package for the FLE-5 Drivers.
Disk - Remote Update Application Installation Package.
Installation and User Guide
Registration Request Form
Note: in addition to this Sales Pack, a Service Cable will be required to connect the
FLS-2D to the Product/Phone to be flashed, e.g. XMS-3, and a software package to run
the flashing process.
The picture overleaf shows how to connect the FLS-2 device and
associated cables to the PC and Product/Phone.