Nokia N95 8GB User Guide
Issue 1
DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that this RM-421 product is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/
phones/declaration_of_conformity/.
© 2007 Nokia. All rights reserved.
Nokia, Nokia Connecting People, Nseries, N95, N-Gage, Visual Radio, and Nokia Care are trademarks or registered trademarks of Nokia Corporation. Nokia tune
is a sound mark of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.
Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is
prohibited.
This product includes software licensed from Symbian Software Ltd © 1998-2007. Symbian and Symbian OS are trademarks of Symbian Ltd.
US Patent No 5818437 and other pending patents. T9 text input software Copyright © 1997-2007. Tegic Communications, Inc. All rights reserved.
Java and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.
Portions of the Nokia Maps software are copyright © 1996-2002 The FreeType Project. All rights reserved.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) f or personal and noncommercial use in connecti on with information which has
been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection
with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information, including that
related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See http://www.mpegla.com.
.
Nokia operates a policy of ongoing development. Nokia reserves th e right to make changes and improvements to any of the products described in this document
without prior notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSS OF
DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.
THE CONTENTS OF THIS DO CUMENT ARE PROVIDED "A S IS". EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMP LIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY,
RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
The third-party appl ications provided with your device may have been created and may be owned by persons or entities not affiliated with or related to Nokia.
Nokia does not own the copyrights or intellectual property rights to the third-party applications. As such, Nokia does not take any responsibility for end-user
support, functionality of the applications, or the information in the applications or these materials. Nokia does not provide any warranty for the third-party
applications.
BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO THE
MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. YOU FURTHER ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY REPRESENTATIONS OR
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THAT
THE APPLICATIONS WILL NOT INFRINGE ANY THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.
The availability of particular products and applications and services for these products may vary by region. Please check with your Nokia dealer for details, and
availability of language options.
Export controls
This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to
law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment).The FCC or Industry Canada
can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device
complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved
by Nokia could void the user's authority to operate this equipment.
/Issue 1
Contents
For your safety ...............................................10
Contents
About your device...............................................................11
Network services................................................................12
Enhancements, batteries, and chargers...........................12
Get connected.................................................13
Useful information.........................................14
Help......................................................................................14
Get started...........................................................................14
Additional applications......................................................14
Software updates...............................................................14
Settings................................................................................15
Access codes........................................................................15
Prolong battery life............................................................16
Free memory.......................................................................17
Your device.....................................................18
Welcome..............................................................................18
Switch..................................................................................18
Transfer content...............................................................18
Synchronise, retrieve, or send content..........................19
Display indicators...............................................................20
Volume and loudspeaker control......................................21
Lock the keypad..................................................................21
Offline profile......................................................................22
Games..................................................................................22
Multimedia menu...............................................................23
Fast downloading...............................................................23
Web browser..................................................25
Browse the web..................................................................25
Browser toolbar..................................................................26
Navigate pages...................................................................27
Web feeds and blogs..........................................................27
Widgets................................................................................27
Content search....................................................................28
Download and purchase items..........................................28
Bookmarks...........................................................................28
Empty the cache..................................................................29
End the connection.............................................................29
Connection security............................................................29
Web settings.......................................................................30
Connections....................................................32
Wireless LAN........................................................................32
About WLAN......................................................................32
WLAN connections...........................................................32
WLAN wizard....................................................................33
WLAN internet access points..........................................33
Operating modes.............................................................34
Connection manager..........................................................34
Active data connections..................................................34
Available WLAN networks...............................................34
Bluetooth connectivity.......................................................35
About Bluetooth connectivity.........................................35
Settings.............................................................................35
Security tips......................................................................36
Send data using Bluetooth connectivity........................36
Pair devices.......................................................................36
Receive data using Bluetooth connectivity...................37
Remote SIM mode............................................................37
Infrared................................................................................38
USB.......................................................................................38
PC connections....................................................................39
Nokia Wireless Keyboard...................................................39
Modem.................................................................................40
Nokia Video Centre.........................................41
Find and view videos..........................................................41
Internet videos....................................................................42
Play downloaded videos....................................................42
Transfer videos from your PC............................................42
Settings................................................................................43
Music folder....................................................44
Music player.........................................................................44
Play a song or a podcast episode...................................44
Music menu.......................................................................45
Playlists.............................................................................45
Podcasts............................................................................46
Home network with music player..................................46
Transfer music to your device........................................47
Transfer music from PC.................................................47
Transfer with Windows Media Player.........................47
Nokia Music Store...............................................................48
Radio....................................................................................49
Listen to the radio...........................................................49
View visual content.........................................................50
Saved stations..................................................................50
Settings.............................................................................50
Nokia Podcasting................................................................50
Settings.............................................................................51
Search................................................................................51
Directories........................................................................52
Downloads........................................................................52
Play and manage podcasts.............................................53
Media folder...................................................54
RealPlayer ...........................................................................54
Play video clips.................................................................54
Stream content over the air............................................54
RealPlayer settings..........................................................54
Adobe Flash Player.............................................................55
Nokia Lifeblog.....................................................................55
About Nokia Lifeblog.......................................................55
Installation on your PC....................................................55
Connect your device and PC............................................56
Copy items........................................................................56
Browse time line and favourites....................................56
Post to web.......................................................................57
Import items....................................................................58
Activation keys....................................................................58
Recorder..............................................................................59
Camera............................................................60
About the camera...............................................................60
Image capture.....................................................................60
Still image camera indicators.........................................60
Active toolbar...................................................................61
Take pictures....................................................................62
After taking a picture......................................................63
Flash..................................................................................63
Scenes...............................................................................64
Take pictures in a sequence............................................64
You in the picture—self-timer........................................64
Tips on taking good photographs..................................65
Video recording..................................................................66
Contents
Video capture indicators.................................................66
Record videos...................................................................66
After recording a video...................................................67
Camera settings..................................................................67
Still image camera settings............................................68
Contents
Setup settings—adjust colour and lighting..................68
Video settings...................................................................69
Gallery............................................................71
View and organise files......................................................71
Images and video clips.......................................................71
View images and videos.................................................71
Organise images and videos...........................................72
Active toolbar...................................................................72
Albums..............................................................................73
Print basket......................................................................73
Slide show........................................................................74
Edit images..........................................................................74
Image editor.....................................................................74
Crop image.......................................................................74
Reduce red-eye.................................................................75
Useful shortcuts...............................................................75
Edit videos...........................................................................75
TV-out mode........................................................................75
Presentations......................................................................76
Print images........................................................................76
Image print.......................................................................76
Printer selection............................................................77
Print preview.................................................................77
Print settings.................................................................77
Print online.......................................................................77
Share images and videos online.......................................78
Home network....................................................................78
About home network......................................................78
Important security information.....................................79
Settings for home network.............................................79
Set sharing on and define content.................................80
View and share media files.............................................80
Copy media files...............................................................81
Positioning (GPS)............................................82
About GPS............................................................................82
GPS receiver.........................................................................83
About satellite signals........................................................83
Position requests................................................................84
Maps.....................................................................................84
About Maps.......................................................................84
Browse maps....................................................................85
Download maps...............................................................86
Find a place.......................................................................87
Plan a route......................................................................88
Extra services for Maps....................................................88
Navigation.....................................................................88
Guides.............................................................................89
Landmarks...........................................................................89
GPS data...............................................................................90
Route guidance................................................................90
Retrieve position information........................................91
Trip meter.........................................................................91
Personalise your device.................................92
Themes................................................................................92
Profiles—set tones.............................................................92
3-D tones.............................................................................93
Modify the standby mode..................................................93
Modify the main menu.......................................................94
Time management.........................................95
Clock ....................................................................................95
Alarm clock.......................................................................95
World clock.......................................................................95
Calendar...............................................................................96
Create a calendar entry...................................................96
Calendar views.................................................................96
Manage calendar entries.................................................97
Messaging.......................................................98
Messaging main view.........................................................98
Write text.............................................................................99
Traditional text input......................................................99
Predictive text input........................................................99
Tips on text input..........................................................100
Change the writing language.......................................100
Edit text and lists...........................................................100
Write and send messages................................................100
Messaging inbox...............................................................102
Receive messages..........................................................102
Multimedia messages....................................................102
Data, settings, and web service messages..................103
Mailbox..............................................................................103
Define the e-mail settings............................................103
Open the mailbox..........................................................103
Retrieve e-mail messages.............................................104
Delete e-mail messages................................................104
Disconnect from the mailbox.......................................105
View messages on a SIM card..........................................105
Messaging settings...........................................................105
Text message settings...................................................105
Multimedia message settings.......................................106
E-mail settings...............................................................106
Manage mailboxes......................................................106
Connection settings....................................................107
User settings................................................................107
Retrieval settings........................................................108
Automatic retrieval settings......................................108
Web service message settings.....................................108
Cell broadcast settings..................................................109
Other settings.................................................................109
Make calls.....................................................110
Voice calls..........................................................................110
Options during a call........................................................110
Voice and video mailboxes..............................................111
Answer or decline a call...................................................111
Make a conference call.....................................................111
1-touch dial a phone number.........................................112
Call waiting.......................................................................112
Voice dialling.....................................................................112
Make a video call..............................................................113
Options during a video call..............................................114
Answer or decline a video call.........................................114
Video sharing....................................................................115
Requirements.................................................................115
Settings...........................................................................115
Share live video or video clips......................................116
Accept an invitation.......................................................117
Internet calls.....................................................................117
Create an internet call profile.......................................117
Connect to the internet call service.............................118
Make internet calls ........................................................118
Service settings..............................................................119
Log.....................................................................................119
Recent calls.....................................................................119
Call duration...................................................................120
Packet data.....................................................................120
Monitor all communication events..............................120
Contents
Contacts (phonebook)..................................122
Save and edit names and numbers................................122
Manage names and numbers..........................................122
Default numbers and addresses.....................................123
Add ringing tones for contacts........................................123
Contents
Copy contacts....................................................................123
SIM directory and other SIM services..............................124
Manage contact groups...................................................124
Office folder..................................................125
Quickoffice.........................................................................125
Quickword......................................................................125
Quicksheet......................................................................125
Quickpoint......................................................................125
Quickmanager................................................................126
Notes..................................................................................126
Adobe PDF reader.............................................................126
Converter...........................................................................126
Zip manager......................................................................127
Barcode reader.................................................................127
Applications folder.......................................128
Calculator...........................................................................128
Application manager........................................................128
Install applications and software ...............................129
Remove applications and software.............................130
Settings...........................................................................130
Tools folder..................................................131
File manager.....................................................................131
Mass memory tool............................................................131
Voice commands...............................................................132
Sync....................................................................................132
Device manager................................................................133
Settings........................................................134
General settings................................................................134
Personalisation settings...............................................134
Enhancement settings...................................................135
Security settings............................................................136
Phone and SIM.............................................................136
Certificate management.............................................136
Security module..........................................................138
Restore original settings...............................................138
Positioning settings......................................................138
Phone settings..................................................................138
Call settings....................................................................139
Call divert........................................................................140
Call barring.....................................................................140
Network settings...........................................................140
Connection settings..........................................................141
Data connections and access points............................141
Access points..................................................................142
Create a new access point..........................................142
Packet data access points..........................................142
WLAN internet access points.....................................143
Packet data settings......................................................144
Wireless LAN settings....................................................144
SIP settings.....................................................................145
Internet call settings.....................................................145
Configurations................................................................145
Access point name control............................................145
Application settings.........................................................145
Troubleshooting...........................................146
Battery information.....................................149
Charging and discharging................................................149
Nokia battery authentication guidelines.......................150
Authenticate hologram.................................................150
What if your battery is not authentic?........................150
Care and maintenance.................................151
Disposal.............................................................................152
Additional safety information.....................153
Small children...................................................................153
Operating environment...................................................153
Medical devices.................................................................153
Implanted medical devices...........................................153
Hearing aids...................................................................154
Vehicles..............................................................................154
Potentially explosive environments...............................154
Emergency calls................................................................155
Certification information (SAR).......................................155
Index............................................................157
Contents
For your safety
Read these simple guidelines. Not following them may
be dangerous or illegal. Read the complete user guide
for further information.
For your safety
SWITCH ON SAFELY
Do not switch the device on when wireless
phone use is prohibited or when it may cause
interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free
to operate the vehicle while driving. Your first
consideration while driving should be road
safety.
INTERFERENCE
All wireless devices may be susceptible to
interference, which could affect performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the device off
near medical equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can
cause interference in aircraft.
10
SWITCH OFF WHEN REFUELING
Do not use the device at a refueling point. Do
not use near fuel or chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Do not use the device
where blasting is in progress.
USE SENSIBLY
Use only in the positions as explained in the
product documentation. Do not touch the
antenna areas unnecessarily.
QUALIFIED SERVICE
Only qualified personnel may install or repair
this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and
batteries. Do not connect incompatible
products.
WATER-RESISTANCE
Your device is not water-resistant. Keep it dry.
BACK-UP COPIES
Remember to make back-up copies or keep a
written record of all important information
stored in your device.
CONNECTING TO OTHER DEVICES
When connecting to any other device, read its
user guide for detailed safety instructions. Do
not connect incompatible products.
EMERGENCY CALLS
Ensure the phone function of the device is
switched on and in service. Press the end key as
many times as needed to clear the display and
return to the standby mode. Enter the
emergency number, then press the call key. Give
your location. Do not end the call until given
permission to do so.
About your device
The wireless device described in this guide is approved for
use on the (E)GSM 850, 900, 1800, 1900 MHz, and WCDMA
(HSDPA) 850 and 1900 MHz networks. Contact your service
provider for more information about networks.
When using the features in this device, obey all laws and
respect local customs, privacy and legitimate rights of
others, including copyrights.
Not all networks support all features offered in this device.
For instance, video calls, video sharing, push-to-talk, and
instant messaging are not compatible with the networks
in the United States of America.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred, or forwarded.
Your device supports internet connections and other
methods of connectivity. Like computers, your device may
be exposed to viruses, malicious messages and
applications, and other harmful content. Exercise caution
and open messages, accept connectivity requests,
download content, and accept installations only from
trustworthy sources. To increase the security of your
devices, consider installing, using, and regularly updating
antivirus software, firewall, and other related software on
your device and any connected computer.
Warning: To use any features in this device, other
than the alarm clock, the device must be switched on. Do
not switch the device on when wireless device use may
cause interference or danger.
The office applications support common features of
Microsoft Word, PowerPoint, and Excel (Microsoft Office
2000, XP, and 2003). Not all file formats can be viewed or
modified.
During extended operation, such as an active video
sharing session or high-speed data connection, the device
may feel warm. In most cases, this condition is normal. If
you suspect the device is not working properly, take it to
the nearest authorized service facility.
For your safety
11
Your device may have preinstalled bookmarks and links for
third-party internet sites. You may also access other thirdparty sites through your device. Third-party sites are not
affiliated with Nokia, and Nokia does not endorse or
assume liability for them. If you choose to access such
sites, you should take precautions for security or content.
The images in this guide may differ from your device
display.
For your safety
Network services
To use the phone you must have service from a wireless
service provider. Many of the features require special
network features. These features are not available on all
networks; other networks may require that you make
specific arrangements with your service provider before
you can use the network services. Your service provider
can give you instructions and explain what charges will
apply. Some networks may have limitations that affect
how you can use network services. For instance, some
networks may not support all language-dependent
characters and services.
Your service provider may have requested that certain
features be disabled or not activated in your device. If so,
these features will not appear on your device menu. Your
device may also have a special configuration such as
changes in menu names, menu order, and icons. Contact
your service provider for more information.
12
This device supports WAP 2.0 protocols (HTTP and SSL) that
run on TCP/IP protocols. Some features of this device, such
as MMS, browsing, and e-mail require network support for
these technologies.
Enhancements, batteries, and chargers
Always switch the device off and disconnect the charger
before removing the battery.
Check the model number of any charger before use with
this device. This device is intended for use when supplied
with power from the DC-4, AC-4, or AC-5 charger and from
an AC-1, ACP-8, ACP-9, ACP-12, or LCH-12 charger when
used with the CA-44 charger adapter.
The battery intended for use with this device is BL-6F.
Warning: Use only batteries, chargers, and
enhancements approved by Nokia for use with this
particular model. The use of any other types may
invalidate any approval or warranty, and may be
dangerous.
For availability of approved enhancements, please check
with your dealer. When you disconnect the power cord of
any enhancement, grasp and pull the plug, not the cord.
Get connected
Nokia N95 8GB supports the following connectivity
methods:
● 2G and 3G networks
● Bluetooth connectivity — to transfer files and
connect to compatible enhancements.
"Bluetooth connectivity", p. 35.
● Nokia AV connector (3.5 mm) — to connect to
compatible headsets, headphones, TVs , or home
stereo sets.
● Data cable — to connect to compatible devices, such
as printers and PCs.
● Wireless LAN (WLAN) — to connect to the internet
and WLAN enabled devices.
LAN", p. 32.
● Infrared — to transfer and synchronise data
between compatible devices.
Infrared", p. 38.
● GPS — to connect to GPS satellites to measure your
location.
See "TV-out mode", p. 75.
See "USB", p. 38.
See "Wireless
See "
See "Positioning (GPS)", p. 82.
See
Get connected
13
Useful information
Model number: N95-4
Hereinafter referred to as Nokia N95 8GB.
For local services and warranty information, please
refer to the separate booklet.
Useful information
Help
Your device has context-sensitive help. When an
application is open, select Options > Help to access
help for the current view.
When you are reading the instructions, to switch
between help and the application that is open in the
background, press and hold
To open help from the main menu, select Tools >
Utilities > Help. Select the desired application to view
its help topics.
.
Get started
See the get started guide for keys and parts
information, instructions for setting up the device and
for other essential information.
14
Additional applications
There are various applications provided by Nokia and
different third-party software developers that help you
do more with your device. These applications are
explained in the guides that are available on the
product support pages of the Nokia website.
Software updates
Nokia may produce software updates that may offer
new features, enhanced functions, or improved
performance. You may be able to request these
updates through the Nokia Software Updater PC
application. To update the device software, you need
the Nokia Software Updater application and a
compatible PC with Microsoft Windows 2000, XP, or
Vista operating system, broadband internet access,
and a compatible data cable to connect your device to
the PC.
To get more information and to download the Nokia
Software Updater application, visit
www.nokiausa.com/softwareupdate in the United
States or www.latinoamerica.nokia.com/nsu in Latin
America.
Tip: To check the software version in your device,
enter *#0000# in the standby mode.
Settings
Your device normally has MMS, GPRS, streaming, and
mobile internet settings automatically configured in
the device, based upon your network service provider
information. You may have settings from your service
providers already installed in your device, or you may
receive or request the settings from the network
service providers as a special message.
You can change the general settings in your device,
such as language, standby mode, display, and keypad
lock settings.
See "General settings", p. 134.
Access codes
If you forget any of the access codes, contact your
service provider.
● Personal identification number (PIN) code — This
code protects your SIM card against unauthorised
use. The PIN code (4 to 8 digits) is usually supplied
with the SIM card. After three consecutive incorrect
PIN code entries, the code is blocked, and you need
the PUK code to unblock it.
● UPIN code — This code may be supplied with the
USIM card. The USIM card is an enhanced version of
the SIM card and is supported by UMTS mobile
phones.
● PIN2 code — This code (4 to 8 digits) is supplied
with some SIM cards, and is required to access some
functions in your device.
● Lock code (also known as security code) — This code
(5 digits) can be used to lock the device to avoid
unauthorised use. The factory setting for the lock
code is 12345. To avoid unauthorised use of your
device, change the lock code. Keep the new code
secret and in a safe place se par ate fr om your dev ice.
Try entering the code only once, if you forget the
code. If the code you entered is not correct, contact
a Nokia Care point or your service provider for
further instructions.
● Personal unblocking key (PUK) code and PUK2
code — These codes (8 digits) are required to
change a blocked PIN code or PIN2 code,
respectively. If the codes are not supplied with the
SIM card, contact the operator whose SIM card is in
your device.
● UPUK code — This code (8 digits) is required to
change a blocked UPIN code. If the code is not
supplied with the USIM card, contact the operator
whose USIM card is in your device.
Useful information
15
Prolong battery life
Many features in your device increase the demand on
battery power and reduce the battery life time. To save
battery power, note the following:
● Features that use Bluetooth technology, or allowing
such features to run in the background while using
other features, increase the demand on battery
power. To prolong the operating time of your
device, turn the Bluetooth technology off when you
Useful information
do not need it.
● Features that use wireless LAN (WLAN), or allowing
such features to run in the background while using
other features, increase the demand on battery
power. WLAN on your Nokia device switches off
when you are not trying to connect, not connected
to another access point, or not scanning for
available networks. To further reduce battery
consumption, you can specify that your device does
not scan, or scans less often, for available networks
in the background. WLAN switches off in between
background scans.
Scan for networks is set to Never, the WLAN
availability icon is not shown in the standby mode.
However, you can still manually scan for available
WLAN networks and connect to WLAN networks as
usual.
● If you have set Packet data connection to When
16
available in connection settings, and there is no
See "Wireless LAN", p. 32. When
pa cket d ata covera ge (GP RS), the device periodically
tries to establish a packet data connection, which
causes increased demand on battery power. To
prolong the operating time of your device, select
Packet data connection > When needed.
● The Maps application downloads new map
information when you scroll to new areas on the
map, which increases the demand on battery power.
You can prevent the device from automatically
downloading new maps.
● If the signal strength of the cellular network varies
much in your area, your device must scan for the
available network repeatedly. This increases the
demand on battery power.
If the network mode is set to dual mode in the
network settings, the device searches for the UMTS
network. If it is not available, the device uses the
available GSM network. To only use the GSM
network, press
Phone > Network > Network mode > GSM.
● The backlight of the display increases the demand
on battery power. To change the time-out after
which the backlight is switched off, press
select Tools > Settings > General >
Personalization > Display > Light time-out. To
adjust the light sensor that observes the lighting
conditions and adjusts the brightness of the display,
in the display settings, select Light sensor.
See "Maps", p. 84.
, and select Tools > Settings >
, and
● Leaving applications running in the background
increases the demand on battery power. To close
the applications you do not use, press and hold
scroll to an application in the list, and press C.
Pressing C does not close Music player. To close Music
player, select it from the list and Options > Exit.
Free memory
Many features of the device use memory to store data.
The device notifies you if the device memory is low.
To view the types of data you have in the device and
how much memory the different data types consume,
press
Memory details. The amount of available memory is
shown in Free memory.
To free device memory, transfer data to a compatible
PC.
To remove data to free memory, use File manager to
delete files you no longer need, or go to the respective
application. You can remove the following:
● Messages in the folders in Messaging and retrieved
● Saved web pages
● Contact information
● Calendar notes
, and select Tools > File mgr. > Options >
e-mail messages from the mailbox
● Applications shown in Application manager that you
do not need
,
● Installation files (.sis or .sisx) of applications you
have installed to your device.
● Images and video clips in Gallery. Back up the files
to a compatible PC using Nokia Nseries PC Suite.
If you are deleting multiple items and one of the
following notes is shown, delete items, one by one,
beginning with the smallest item:
● Not enough memory to perform operation.
Delete some data first.
● Memory low. Delete some data from phone
memory.
Useful information
17
Your device
Welcome
Your device
When you switch on your device, the Welcome
application is displayed.
Select from the following:
● Sett. wizard — to configure various settings, such
as e-mail. For more information on the Settings
wizard application, see the guides available at the
Nokia product support pages or your local Nokia
website.
● Switch — to transfer content, such as contacts and
calendar entries, from a compatible Nokia device.
See "Transfer content", p. 18.
There may also be a demonstration about your device
available in the Welcome application.
To access the Welcome application later, press
select Tools > Utilities > Welcome. You can also
access the individual applications from their menu
locations.
18
Switch
Transfer content
With the Switch application, you can transfer content,
such as contacts, between two compatible Nokia
devices using Bluetooth connectivity or infrared.
The type of content that can be transferred depends on
the model of the device from which you want to
transfer content. If the other device supports
synchronisation, you can also synchronise data
between the other device and your device. Your device
notifies you if the other device is not compatible.
I f t he ot he r d ev ic e c an n ot be powered on without a SIM
card, you can insert your SIM card in it. When your
device is switched on without a SIM card, the offline
profile is automatically activated.
, and
Transfer content
1. To retrieve data from the other device for the first
time, on your device, select Switch in the Welcome
application, or press
Utilities > Switch.
, and select Tools >
2. Select the connection type you want to use to
transfer the data. Both devices must support the
selected connection type.
3. If you select Bluetooth connectivity: To have your
device search for devices with Bluetooth
connectivity, select Continue. Select the device
from which you want to transfer content. You are
asked to enter a code on your device. Enter a code
(1-16 digits), and select OK. Enter the same code on
the other device, and select OK. The devices are now
paired.
See "Pair devices", p. 36.
For some device models, the Switch application is
sent to the other device as a message. To install the
Switch application on the other device, open the
message, and follow the instructions on the display.
If you select infrared, connect the two devices.
" Infrared", p. 38.
4. From your device, select the content you want to
transfer from the other device.
Once the transfer has started, you can cancel it and
continue later.
Transferring time depends on the amount of data to
be transferred.
Content is transferred from the memory of the other
device to the corresponding location in your device.
See
Synchronise, retrieve, or send content
After the first transfer, select from the following to start
a new transfer, depending on the model of the other
device:
to synchronise content between your device and
the other device, if the other device supports
synchronisation. The synchronisation is two-way. If an
item is deleted in one device, it is deleted in both. You
cannot restore deleted items with synchronisation.
to retrieve data from the other device to your
device. With retrieval, data is transferred from the
other device to your device. You may be asked to keep
or delete the original data in the other device,
depending on the device model.
to send data from your device to your other device
If Switch cannot transfer an item, depending on the
type of the other device, you can add the item to the
Nokia folder to C:\Data\Nokia or E:\Data\Nokia and
transfer it from there. When you select the folder to
transfer, the items are synchronised in the
corresponding folder in the other device, and vice
versa.
Use shortcuts to repeat a transfer
After a data transfer, you can save a shortcut with the
transfer settings to the main view to repeat the same
transfer later.
Your device
19
To edit the shortcut, scroll to it, and select Options >
Shortcut settings. You can, for example, create or
change the name of the shortcut.
A transfer log is shown after every transfer. To view the
log of a previous transfer, scroll to a shortcut in the
main view, and select Options > View log.
Your device
Handle transfer conflicts
If an item to be transferred has been edited in both
devices, the device attempts to merge the changes
automatically. If this is not possible, there is a transfer
conflict. Select Check one by one, Priority to this
phone, or Priority to other phone to solve the
conflict. For further instructions, select Options >
Help.
Display indicators
Th e devi ce is b eing us ed in a GSM network (network
service).
The device is being used in a UMTS network
(network service).
You have one or more unread messages in the
Inbox folder in Messaging.
You have received new e-mail in the remote
mailbox.
20
There are messages waiting to be sent in the
Outbox folder.
You have missed calls.
The ringing type is set to silent, and the message
alert tone and e-mail alert tone are set to off.
The device keypad is locked.
A clock alarm is active.
The second phone line is being used (network
service).
All calls to the device are diverted to another
number (network service). If you have two phone lines,
a number indicates the active line.
A compatible headset is connected to the device.
A compatible TV out cable is connected to the
device.
A compatible text phone is connected to the
device.
A data call is active (network service).
A GPRS packet data connection is active (network
service).
that a connection is available.
A packet data connection is active in a part of the
network that supports EGPRS (network service).
indicates the connection is on hold and that a
connection is available. The icons indicate that EGPRS
is available in the network, but your device is not
necessarily using EGPRS in the data transfer.
indicates the connection is on hold and
A UMTS packet data connection is active (network
service).
that a connection is available.
High-speed downlink packet access (HSDPA) is
supported and active (network service).
connection is on hold and
available.
and a wireless LAN is available (network service).
"About WLAN", p. 32.
that has encryption.
that does not have encryption.
Bluetooth connectivity is on. See "Bluetooth
connectivity", p. 35.
connectivity. When the indicator is blinking, your
device is trying to connect with another device.
is blinking, the device is trying to connect to the other
device or the connection has been lost.
indicates the connection is on hold and
indicates the
that a connection is
See "Fast downloading", p. 23.
You have set the device to scan for wireless LANs,
See
A wireless LAN connection is active in a network
A wireless LAN connection is active in a network
Data is being transmitted using Bluetooth
A USB connection is active.
An infrared connection is active. If the indicator
Volume and loudspeaker control
To increase or decrease the volume level when you
have an active call or are listening to a sound, use the
volume key.
The built-in loudspeaker
allows you to speak and listen
from a short distance without
having to hold the device to your ear.
Warning: Do not hold the device near your ear
when the loudspeaker is in use, because the volume
may be extremely loud.
To use the loudspeaker during a call, select Options >
Activate loudspeaker.
To turn off the loudspeaker, sele ct Options > Activate
handset.
Lock the keypad
To lock the keys, press the left selection key, then the
right selection key.
To unlock the keys, open the 2-way slide, or press the
left selection key, then the right selection key.
Your device
21
You can select to lock the keypad automatically after a
time-out or when the 2-way slide is closed.
"Security settings", p. 136.
Offline profile
Your device
Press , and select Tools > Profiles > Offline.
The offline profile lets you use the device without
connecting to the wireless network. When you activate
the offline profile, the connection to the wireless
network is turned off, as indicated by
strength indicator area. All wireless RF signals to and
from the device are prevented. If you try to send
messages, they are placed in the outbox to be sent
later.
When the offline profile is active, you can use your
device without a SIM card.
Important: In the offline profile you cannot
make or receive any calls, or use other features that
require cellular network coverage. Calls may still be
possible to the official emergency number
programmed into your device. To make calls, you must
first activate the phone function by changing profiles.
If the device has been locked, enter the lock code.
When you have activated the offline profile, you can
still use the wireless LAN, for example, to read your email or browse on the internet. Remember to comply
22
with any applicable safety requirements when
See
in the signal
establishing and using a wireless LAN connection. You
can also use Bluetooth connectivity while in the offline
profile.
To leave the offline profile, press the power key briefly,
and select another profile. The device re-enables
wireless transmissions (providing there is sufficient
signal strength).
Games
You can play high-quality multiplayer N-Gage™ games
with your device.
Your device includes either one of the following
applications in the main menu:
● Discover N-Gage application — With this preview
application you can get information about the
upcoming N-Gage gaming experience, try out game
demos, and download and install the full N-Gage
application when it becomes available.
● N-Gage application — The full featured application
gives you access to the complete N-Gage experience
replacing the Discover N-Gage application in the
menu. You can find new games, try and buy games,
find other players, and access scores, events, chat,
and more. Some features may not be available at the
time of software installation on your device, check
www.n-gage.com for software updates.
For the full N-Gage experience, you need internet
access on your device, either through the cellular
network or wireless LAN. Contact your service provider
for more information on data services.
For more information, visit www.n-gage.com.
Multimedia menu
With the multimedia menu,
you can view your most
frequently used multimedia
content. The selected content
is shown in the appropriate
application.
To open or close the
multimedia menu, press the
multimedia key. To browse
the tiles, scroll left or right. To
select items, press the scroll
key. To return to the
multimedia menu from an open application, press the
multimedia key.
Select from the following:
● Music — Enter Music player and the Now playing
view, browse your songs and play lists, or download
and manage podcasts.
● Gallery — View your last taken picture, start a slide
show of your images, or view media files in albums.
● Games — Try out Nokia Nseries games.
● Maps — View your favourite locations in Maps.
● Internet — View your favourite web links in the
browser.
● Contacts — Add your own contacts, send messages,
or make voice calls. To add a new contact to an
empty position on the list, press the scroll key, and
select a contact. To send a message, in the
multimedia menu, select a contact, and Send text
message or Send multimedia msg..
● Videos — View your favourite videos, and video
clips saved in Nokia Video Centre.
To change the order of the tiles, select Options >
Arrange tiles.
Fast downloading
High-speed downlink packet access (HSDPA, also called
3.5G, indicated by
networks and provides high-speed data downloads.
When HSDPA support in the device is activated and the
device is connected to a UMTS network that supports
HSDPA, downloading data such as messages, e-mail,
and browser pages through the cellular network may
be faster. An active HSDPA connection is indicated by
. See "Display indicators", p. 20.
You can activate or deactivate support for HSDPA in the
device settings.
) is a network service in UMTS
See "Packet data settings", p. 144.
Your device
23
For availability and subscription to data connection
services, contact your service provider.
HSDPA only affects the download speed; sending data
to the network, such as messages and e-mail, is not
affected.
Your device
24
Web browser
With the Web browser, you can view hypertext markup
language (HTML) web pages on the internet as
originally designed. You can also browse web pages
that are designed specifically for mobile devices, and
use extensible hypertext markup language (XHTML), or
the wireless markup language (WML).
To browse the web, you need to have an internet
access point configured in your device.
Browse the web
Press , and select Web.
Shortcut: To start the browser, press and hold
0 in the standby mode.
Important: Use only services that you trust and
that offer adequate security and protection against
harmful software.
Important: Only install and use applications and
other software from trusted sources, such as
applications that are Symbian Signed or have passed
the Java Verified
TM
testing.
To browse a web page, in the bookmarks view, select
a bookmark, or enter the address in the field (
press the scroll key.
Some web pages may contain material, such as
graphics and sounds, that requires a large amount of
memory to view. If your device runs out of memory
while loading such a page, the graphics on the page
are not shown.
To browse web pages without graphics, to save
memory, select Options > Settings > Page > Load
content > Text only.
To enter a new web page address you want to visit,
select Options > Go to web address.
Tip: To visit a web page saved as a bookmark in
the bookmarks view, while browsing, press 1,
and select a bookmark.
To retrieve the latest content of the page from the
server, select Options > Navigation options >
Reload.
To save the web address of the current page as a
bookmark, select Options > Save as bookmark.
To use visual history to view snapshots of the pages
you have visited during the current browsing session,
), and
Web browser
25
select Back (available if History list is set on in the
browser settings and the current page is not the first
page you visit). To go to a previously visited page,
select the page.
To save a page while browsing, select Options >
Tools > Save page.
Web browser
You can save pages and browse them later when
offline. You can also group these saved pages into
folders. To access the pages you have saved, select
Options > Bookmarks > Saved pages.
To open a sublist of commands or actions for the page
that is open, select Options > Service options (if
supported by the web page).
To allow or prevent the automatic opening of multiple
windows, select Options > Window > Block pop-
ups or Allow pop-ups.
Shortcuts while browsing
● Press 1 to open your bookmarks.
● Press 2 to search for keywords in the current page.
● Press 3 to return to the previous page.
● Press 5 to list all open windows.
● Press 8 to show the page overview of the current
page. Press 8 again to zoom in and view the desired
section of the page.
● Press 9 to enter a new web address.
26
● Press 0 to go to the home page (if defined in
settings).
● Press * and # to zoom in or out on the page.
Tip: To return to the standby mode with the
browser open in the background, press
or the end key. To return to the browser, press
and hold
, and select the browser from the list.
twice
Browser toolbar
The browser toolbar helps you select frequently used
functions of the browser.
To open the toolbar, press and hold the scroll key on
an empty spot on a web page. To move within the
tool ba r, sc ro ll left or ri gh t. To sel ec t a fe at ure, pres s t he
scroll key.
In the toolbar, select from the following:
● Frequently used links — View a list of the web
addresses you visit frequently.
● Page overview — See an overview of the current
web page.
● Find — Search for keywords within the current
page.
● Reload — Refresh the page.
● Subscribe to web feeds (if available) — View a list
of available web feeds on the current web page, and
subscribe to a web feed.
Navigate pages
Mini Map and page overview help you navigate web
pages that contain a large amount of information.
When Mini Map is set on in the browser settings and
you scroll through a large web page, Mini Map opens
and shows an overview of the web page you browse.
To set Mini Map on, select Options > Settings >
General > Mini map > On.
To move in Mini Map, scroll left, right, up, or down.
When you find the desired location, stop scrolling. Mini
Map disappears and leaves you at the selected location.
When you are browsing a web page that contains a
large amount of information, you can also use Page
overview to view what kind of information the page
contains.
To show the page overview of the current page, press
8. To find the desired spot on the page, scroll up, down,
left, or right. Press 8 again to zoom in and view the
desired section of the page.
Web feeds and blogs
Web feeds are xml files on web pages that are used by
the weblog community and news organisations to
share the latest headlines or text, for example, news
feeds. Blogs or weblogs are web diaries. Most of the
web feeds use RSS and Atom technologies. It is
common to find web feeds on web, blog, and wiki
pages.
The Web application automatically detects if a web
page contains web feeds.
To subscribe to a web feed, select Options >
Subscribe.
To view the web feeds to which you have subscribed,
in the bookmarks view, select Web feeds.
To update a web feed, select it and Options >
Refresh.
To define how the web feeds are updated, select
Options > Settings > Web feeds.
Widgets
The web browser supports widgets (network service).
Widgets are small, downloadable web applications
that deliver multimedia, news feeds, and other
information, such as weather reports, to your device.
Installed widgets appear as separate applications in
the Applications folder.
You can download widgets using the Download!
application or from the web.
The default access point for widgets is the same as in
the web browser. When active in the background,
some widgets may update information automatically
to your device.
Web browser
27
Content search
To search for keywords, phone numbers, or e-mail
addresses within the current web page, select
Options > Find and the desired option. To go to the
previous match, scroll up. To go to the next match,
scroll down.
Web browser
Tip: To search for keywords within the page,
press 2.
Download and purchase items
You can download items such as ringing tones, images,
operator logos, themes, and video clips. These items
can be provided free of charge, or you can purchase
them. Downloaded items are handled by the respective
applications in your device, for example, a downloaded
photo or an .mp3 file can be saved in Gallery.
Important: Only install and use applications and
other software from trusted sources, such as
applications that are Symbian Signed or have passed
the Java Verified
To download an item, do the following:
1. Select the link.
2. Select the appropriate option to purchase the item
28
(for example, "Buy").
3. Carefully read all the information provided.
TM
testing.
4. To continue or cancel the download, select the
appropriate option (for example, "Accept" or
"Cancel").
When you start a download, a list of ongoing and
completed downloads from the current browsing
session is displayed.
To modify the list, select Options > Downloads. In
the list, scroll to an item, and select Options to cancel
ongoing downloads, or open, save, or delete
completed downloads.
Bookmarks
The bookmarks view opens when you open the Web
application. You can select web addresses from a list
or from a collection of bookmarks in the Auto.
bookmarks folder. You can also enter the URL address
of th e web page you wan t to vis it di rect ly into the field
(
).
indicates the starting page defined for the default
access point.
You can save URL addresses as bookmarks while
browsing on the internet. You can also save addresses
received in messages to your bookmarks and send
saved bookmarks.
To open the bookmarks view while browsing, press 1,
or select Options > Bookmarks.
To edit the details of a bookmark, such as the title,
select Options > Bookmark manager > Edit.
In the bookmarks view, you can also open other
browser folders. The Web application allows you to
save web pages during browsing. In the Saved
pages folder, you can view the content of the pages
you have saved offline.
Web also keeps track of the web pages you visit during
browsing. In the Auto. bookmarks folder, you can
view the list of visited web pages.
In Web feeds, you can view saved links to web feeds
and blogs to which you have subscribed. Web feeds are
commonly found on major news organisation web
pages, personal weblogs, online communities that
offer the latest headlines, and article summaries. Web
feeds use RSS and Atom technologies.
To empty the cache, select Options > Clear privacy
data > Clear cache.
End the connection
To end the connection and view the browser page
offline, select Options > Tools > Disconnect; or to
end the connection and close the browser, select
Options > Exit.
To take the browser to the background, press the end
key once. To end the connection, press and hold the
end key.
To delete the information the network server collects
about your visits to various web pages, select
Options > Clear privacy data > Delete cookies.
Web browser
Empty the cache
The information or services you have accessed are
stored in the cache memory of the device.
A cache is a memory location that is used to store data
temporarily. If you have tried to access or have
accessed confidential information requiring
passwords, empty the cache after each use. The
information or services you have accessed are stored
in the cache.
Connection security
If the security indicator ( ) is displayed during a
connection, the data transmission between the device
and the internet gateway or server is encrypted.
The security icon does not indicate that the data
transmission between the gateway and the content
server (or place where the requested resource is
stored) is secure. The service provider secures the data
transmission between the gateway and the content
server.
29
Security certificates may be required for some services,
such as banking services. You are notified if the identity
of the server is not authentic or if you do not have the
correct security certificate in your device. For more
information, contact your service provider.
Web browser
Web settings
Press , and select Web.
Select Options > Settings and from the following:
General settings
● Access point — Change the default access point.
Some or all access points may be preset for your
device by your service provider; you may not be able
to change, create, edit, or remove them.
● Homepage — Define the home page.
● Mini map — Set Mini Map on or off.
pages", p. 27.
● History list — While browsing, to select Back to see
a list of the pages you have visited during the
current browsing session, set History list on.
● Security warnings — Hide or show security
notifications.
● Java/ECMA script — Enable or disable the use of
scripts.
See "Navigate
Page settings
● Load content — Select whether you want to load
30
images and other objects while browsing. If you
select Text only, to load images or objects later
during browsing, select Options > Tools > Load
images.
● Screen size — Select between full screen and the
normal view with the options list.
● Default encoding — If text characters are not
shown correctly, you can select another encoding
according to language for the current page.
● Block pop-ups — Allow or block automatic opening
of different pop-ups while browsing.
● Automatic reload — If you want the web pages to
be refreshed automatically while browsing, select
On.
● Font size — D ef ine th e fo nt siz e t hat is use d f or w eb
pages.
Privacy settings
● Auto. bookmarks — Enable or disable automatic
bookmark collecting. If you want to continue saving
the addresses of the visited web pages into the
Auto. bookmarks folder, but hide the folder from
the bookmarks view, select Hide folder.
● Form data saving — If you do not want the data
you enter to different forms on a web page to be
saved and used the next time you open the page,
select Off.
● Cookies — Enable or disable the receiving and
sending of cookies.
Web feed settings
● Automatic updates — Define whether you want
the web feeds to be updated automatically and how
often you want to update them. Setting the
application to retrieve web feeds automatically may
involve the transmission of large amounts of data
through your service provider's network. Contact
your service provider for information about data
transmission charges.
● Acc. point for auto-update — Select the desired
access point for updating. This option is only
available when Automatic updates is on.
Web browser
31
Connections
Your device offers several options to connect to the
internet or to another compatible device or PC.
Connections
Wireless LAN
Your device supports wireless local area network
(WLAN). With WLAN, you can connect your device to the
internet and compatible devices that have WLAN.
About WLAN
To use WLAN, it must be available in the location, and
your device must be connected to the WLAN.
Some places, like France, have restrictions on the use
of wireless LAN. Check with your local authorities for
more information.
Features that use WLAN, or that are allowed to run in
the background while using other features, increase
the demand on battery power and reduce the battery
life.
Your device supports the following WLAN features:
● IEEE 802.11b/g standard
● Operation at 2.4 GHz
32
● Wired equivalent privacy (WEP) with keys up to 128
bits, Wi-Fi protected access (WPA), and 802.1x
encryption methods. These functions can be used
only if they are supported by the network.
WLAN connections
To use WLAN, you must create an internet access point
(IAP) for WLAN. Use the access point for applications
that need to connect to the internet.
internet access points", p. 33.
Important: Always enable one of the available
encryption methods to increase the security of your
wireless LAN connection. Using encryption reduces the
risk of unauthorized access to your data.
A WLAN connection is established when you create a
data connection using a WLAN internet access point.
The active WLAN connection ends when you end the
data connection.
You can use WLAN during a voice call or when packet
data is active. You can only be connected to one WLAN
access point device at a time, but several applications
can use the same internet access point.
See "WLAN
When the device is in the offline profile, you can still
use WLAN (if available). Remember to comply with any
applicable safety requirements when establishing and
using a WLAN connection.
Tip: To check the unique media access control
(MAC) address that identifies your device, enter
*#62209526# in the standby mode.
WLAN wizard
The WLAN wizard helps you to connect to a WLAN and
manage your WLAN connections.
The WLAN wizard shows the status of your WLAN
connections in the active standby mode. To view the
available options, scroll to the row showing the status,
and select it.
If the search finds WLANs, for example, WLAN network
found is displayed, to create an internet access point
(IAP) and start the web browser using this IAP, select
the status and Start Web browsing.
If you select a secured WLAN network, you are asked to
enter the relevant passcodes. To connect to a hidden
network, you must enter the correct network name
(service set identifier, SSID). To create a new access
point for a hidden WLAN, select New WLAN.
If you are connected to a WLAN, the IAP name is
displayed. To start the web browser using this IAP,
select the status and Continue Web browsing. To end
the connection in the WLAN, select the status and
Disconnect WLAN.
If WLAN scanning is off and you are not connected to
any WLAN, WLAN scanning off is displayed. To set
scanning on and search for available WLANs, select the
status and press the scroll key.
To start a search for available WLANs, select the status
and Search for WLAN. To set WLAN scanning off, select
the status and select WLAN scanning off.
To access the WLAN wizard application in the menu,
press
, and select Tools > WLAN wiz..
WLAN internet access points
Press , and select Tools > WLAN wiz.
Select Options and from the following:
● Filter WLAN networks — Filter out WLANs in the
list of found networks. The selected networks are
filtered out the next time the application searches
for WLANs.
● Details — View the details of a network shown in
the list. If you select an active connection, the
connection details are displayed.
● Define access point — Create an internet access
point (IAP) in a WLAN.
● Edit access point — Edit the details of an existing
IAP.
Connections
33
You can also use connection manager to create
internet access points.
connections", p. 34.
See "Active data
Operating modes
There are two operating modes in WLAN:
Connections
infrastructure and ad hoc.
The infrastructure operating mode allows two kinds of
communication: wireless devices are connected to
each other through a WLAN access point device, or
wireless devices are connected to a wired LAN through
a WLAN access point device.
In the ad hoc operating mode, devices can send and
receive data directly with each other.
Connection manager
Active data connections
Press , and select Tools > Connectivity > Conn.
mgr. > Active data connections.
In the active data connections view, you can see the
open data connections:
data calls
packet data connections
WLAN connections
34
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To end a connection, select Options > Disconnect. To
close all open connections, select Options >
Disconnect all.
To view the details of a connection, select Options >
Details. The details shown depend on the connection
type.
Available WLAN networks
Press , and select Tools > Connectivity > Conn.
mgr. > Available WLAN networks.
The available WLAN view shows a list of WLANs within
range, their network mode (infrastructure or ad hoc),
and signal strength indicator.
with encryption, and
connection in the network.
To view the details of a network, select Options >
Details.
To create an internet access point in a network, select
Options > Define access point.
is shown for networks
if your device has an active
Bluetooth connectivity
About Bluetooth connectivity
You can make a wireless connection to other
compatible devices with Bluetooth connectivity.
Compatible devices may include mobile phones,
computers, and enhancements such as headsets and
car kits. You can use Bluetooth connectivity to send
images, video clips, music and sound clips, and notes;
make a wireless connection to your compatible PC (for
example, to transfer files); and connect to a compatible
printer to print images with Image print.
Since devices with Bluetooth wireless technology
communicate using radio waves, they do not need to
be in direct line-of-sight. H ow ev e r, th e y m us t b e wi th i n
10 metres (33 feet) of each other, although the
connection may be subject to interference from
obstructions such as walls or from other electronic
devices.
This device is compliant with Bluetooth Specification
2.0 supporting the following profiles: Advanced Audio
Distribution Profile, Audio/Video Remote Control
Profile, Basic Imaging Profile, Basic Printing Profile,
Dial-up Networking Profile, File Transfer Profile, HandsFree Profile, Headset Profile, Human Interface Device
Profile, Object Push Profile, SIM Access Profile, and
Synchronization Profile. To ensure interoperability
between other devices supporting Bluetooth
technology, use Nokia approved enhancements for this
model. Check with the manufacturers of other devices
to determine their compatibility with this device.
There may be restrictions on using Bluetooth
technology in some locations. Check with your local
authorities or service provider.
Features using Bluetooth technology, or allowing such
features to run in the background while using other
features, increase the demand on battery power and
reduce the battery life.
When the device is locked, you cannot use Bluetooth
connectivity.
See "Phone and SIM", p. 136.
Settings
Press , and select Tools > Bluetooth.
When you open the application for the first time, you
are asked to define a name for your device. You can
change the name later on.
Select from the following:
● Bluetooth — To make a wireless connection to
another compatible device, first set Bluetooth
connectivity On, then establish a connection. To
switch off Bluetooth connectivity, select Off.
● My phone's visibility — To a llow y our dev ice to be
found by other devices with Bluetooth wireless
technology, select Shown to all. To set a time after
which the visibility is set from shown to hidden,
select Define period. To hide your device from
other devices, select Hidden.
Connections
35
● My phone's name — E di t th e n ame sh own to othe r
devices with Bluetooth wireless technology.
● Remote SIM mode — To enable another device,
such as a compatible car kit enhancement, to use
the SIM card in your device to connect to the
network, select On.
Connections
mode", p. 37.
See "Remote SIM
Security tips
Press , and select Tools > Bluetooth.
When you are not using Bluetooth connectivity, to
control who can find your device and connect to it,
select Bluetooth > Off or My phone's visibility >
Hidden.
Do no t pa ir with or acc ep t co nn ect io n re qu est s f rom an
unknown device. This protects your device from
harmful content.
Send data using Bluetooth connectivity
Several Bluetooth connections can be active at a time.
For example, if you are connected to a compatible
headset, you can also transfer files to another
compatible device at the same time.
1. Open the application where the item you want to
36
send is stored. For example, to send an image to
another compatible device, open Gallery.
2. Select the item and Options > Send > Via
Bluetooth.
Devices with Bluetooth wireless technology that
are within range are displayed. Device icons are as
follows:
computer
phone
audio or video device
other device
To interrupt the search, select Stop.
3. Select the device with which you want to connect.
4. If the other device requires pairing before data can
be transmitted, a tone sounds, and you are asked
to enter a passcode.
When the connection is established, Sending
data is displayed.
Tip: When searching for devices, some devices
may show only the unique address (device
address). To find the unique address of your
device, enter *#2820# in the standby mode.
See "Pair devices", p. 36.
Pair devices
To pair with compatible devices and view your paired
devices, in the main view of Bluetooth connectivity,
scroll right.
Before pairing, create your own passcode (1 to 16
digits), and agree with the owner of the other device
to use the same code. Devices that do not have a user
interface have a factory-set passcode. The passcode is
used only once.
1. To pair with a device, select Options > New
paired device. Devices that are within range are
displayed.
2. Select the device, and enter the passcode. The same
passcode must be entered on the other device as
well.
3. Some audio enhancements connect automatically
to your device after pairing. Otherwise, scroll to the
enhancement, and select Options > Connect to
audio device.
Paired devices are indicated by
To set a device as authorised or unauthorised, scroll to
the device, and select from the following options:
● Set as authorized — Connections between your
device and the authorised device can be made
without your knowledge. No separate acceptance or
authorisation is needed. Use this status for your own
devices, such as your compatible headset or PC or
devices that belong to someone you trust.
indicates authorised devices in the paired devices
view.
● Set as unauthorized — Connection requests from
this device must be accepted separately every time.
in the device search.
To cancel a pairing, scroll to the device, and select
Options > Delete.
If you want to cancel all pairings, select Options >
Delete all.
Receive data using Bluetooth connectivity
When you receive data through Bluetooth
connectivity, a tone sounds, and you are asked if you
want to accept the message. If you accept,
displayed, and the item is placed in the Inbox folder in
Messaging. Messages received through Bluetooth
connectivity are indicated by
.
is
Remote SIM mode
Before the remote SIM mode can be activated, the two
devices must be paired and the pairing initiated from
the other device. When pairing, use a 16-digit
passcode, and set the other device as authorised.
To use the remote SIM mode with a compatible car kit
enhancement, activate Bluetooth connectivity, and
enable the use of the remote SIM mode with your
device. Activate the remote SIM mode from the other
device.
When the remote SIM mode is on in your device,
Remote SIM mode is displayed in the standby mode.
The connection to the wireless network is turned off,
Connections
37
as indicated by in the signal strength indicator area,
and you cannot use SIM card services or features
requiring cellular network coverage.
When the wireless device is in the remote SIM mode,
you can only use a compatible connected
e nh an c em en t , s uc h a s a c ar k it , t o ma ke o r r ec e iv e c a ll s.
Connections
Your wireless device will not make any calls while in
this mode, except to the emergency numbers
programmed into your device. To make calls from your
device, you must leave the remote SIM mode. If the
device is locked, enter the lock code to unlock it.
To leave the remote SIM mode, press the power key,
and select Exit remote SIM mode.
Infrared
With infrared, you can transfer data (such as business
cards, calendar notes, and media files) with a
compatible device.
Do not point the infrared (IR) beam at anyone's eye or
allow it to interfere with other IR devices. This device
is a Class 1 laser product.
To send and receive data using infrared, do the
following:
1. Ensure that the infrared ports of the sending and
receiving devices are pointing at each other, and
38
that there are no obstructions between the devices.
The distance between the two devices is not more
than 1 meter (3 feet).
2. The user of the receiving device activates the
infrared port.
3. To activate the infrared port of your device to
receive data through infrared, press
Tools > Connectivity > Infrared.
4. The user of the sending device selects the desired
infrared function to start the data transfer.
5. To send data using infrared, locate the desired file
in an application or the file manager, and select
Options > Send > Via infrared.
If the data transfer is not started within 1 minute after
the activation of the infrared port, the connection is
cancelled and must be started again.
Items received using infrared are placed in the Inbox
folder in Messaging. New infrared messages are
indicated by
.
, and select
USB
Press , and select Tools > Connectivity > USB.
To have the device ask the purpose of the connection
each time a compatible data cable is connected, select
Ask on connection > Yes.
If Ask on connection is set to off or you want to change
the mode during an active connection, select USB
mode and from the following:
● PC Suite — Use Nokia PC applications such as Nokia
Nseries PC suite, Nokia Lifeblog, and Nokia Software
Updater.
● Data transfer — Transfer data between your device
and a compatible PC. Use this mode also for
downloading maps with the Nokia Map Loader PC
application.
● Image print — Print images on a compatible
printer.
● Media player — Synchronise music with Windows
Media Player.
PC connections
You can use your device with a variety of compatible
PC connectivity and data communications appli cations.
With Nokia Nseries PC Suite you can, for example,
transfer images between your device and a compatible
PC.
Always create the connection from the PC to
synchronise with your device.
Nokia Wireless Keyboard
To set up a Nokia Wireless Keyboard or other
compatible wireless keyboard supporting the
Bluetooth Human Interface Devices (HID) profile for use
with your device, use the Wireless keyboard
application. The keyboard enables you to enter text in
comfort, using the full QWERTY layout, for text
messages, e-mail, and calendar entries.
1. Activate Bluetooth connectivity on your device.
2. Switch on the keyboard.
3. Press
keybd..
4. To start searching for devices with Bluetooth
connectivity, select Options > Find keyboard.
5. Select the keyboard from the list, and press the
scroll key to start the connection.
6. To pair the keyboard with your device, enter a
passcode of your choice (1 to 9 digits) on the device
and the same passcode on your keyboard.
To enter the digits of the passcode, you may need
to press the Fn key first.
7. If you are asked for a keyboard layout, select it from
a list on your device.
When the name of the keyboard appears, its status
changes to Keyboard connected, and the green
indicator of your keyboard blinks slowly; the keyboard
is ready for use.
For details on the operation and maintenance of your
keyboard, see its user guide.
, and select Tools > Connectivity > Wlss.
Connections
39
Modem
Press , and select Tools > Connectivity >
Modem.
To connect your device as a modem to a compatible PC
using infrared, press the scroll key.
Connections
See " Infrared", p. 38.
40
Nokia Video Centre
With Nokia Video Centre (network service), you can
download and stream video clips over the air from
compatible internet video services using packet data
or WLAN. You can also transfer video clips from a
compatible PC to your device and view them in Video
Centre.
Video Centre supports the same file formats as
RealPlayer. All videos are played in the landscape mode
by default.
Your device may have predefined services.
Service providers may provide free content or charge a
fee. Check the pricing in the service or from the service
provider.
Find and view videos
1. Press , and select Video center.
2. To connect to a service, scroll left or right, and select
the desired video service.
The device updates and displays the content
available in the service.
3. To view videos by categories (if available), scroll left
or right to view the other tabs.
4. To view information about a video, select
Options > Video details.
5. Some video clips can be streamed over the air, but
others must be first downloaded to your device. To
download a video clip, select Options >
Download.
To stream a video clip or view a downloaded clip,
select Options > Play.
Nokia Video Centre
41
6. When the clip is playing, use the media keys to
control the player. To adjust the volume, press the
volume key.
Downloads continue in the background if you exit the
application. The downloaded videos are saved in
Video center > My videos.
To connect to the internet to browse available services
that you can add to the main view, select Add new
services.
Nokia Video Centre
Internet videos
Internet videos are video clips distributed in the
internet using RSS-based feeds. You can add new feeds
to Internet videos in the settings.
You can view your feeds in the Internet videos folder
in Video Centre.
To add or delete feeds, select Options > Feed
subscriptions.
To view the videos available in a feed, scroll to it, and
press the scroll key.
To view information about a video, select Options >
Video details.
To download a video, scroll to it, and select Options >
Download.
To play the downloaded video, press the scroll key.
42
Play downloaded videos
The downloaded videos are saved in Video center >
My videos.
To play a downloaded video, press the scroll key.
To play a downloaded video in the home network,
select Options > Show via home network. Home
network must be configured first.
network", p. 78.
When the clip is playing, use the media keys to control
the player. To adjust the volume, press the volume key.
If there is not enough free space in the device memory,
the application automatically deletes some of the
oldest videos when new videos are downloaded.
indicates videos that may soon be deleted.
To prevent a video from being automatically deleted
(
), select Options > Protect.
See "About home
Transfer videos from your PC
Transfer your own videos to Video Centre from
compatible devices using a compatible USB data cable.
To transfer videos from a compatible PC, do the
following:
1. To view your device on a PC as a mass memory
device (E:\) where you can transfer any data files,
make the connection with a compatible USB data
cable.
2. Select Data transfer as the connection mode.
3. Select the videos you want to copy from your PC.
4. Transfer the videos to E:\My Videos in the mass
memory of your device.
The transferred videos appear in the My videos
folder in Video Centre. Video files in other folders of
your device are not displayed.
Settings
In the Video Centre main view, select Options >
Settings and from the following:
● Video service selection — Select the video services
you want to appear in the main view of the
application. You can also view the details of a video
service.
Some services require a user name and a password
that you receive from the service provider.
● Default access points — Select the access points
used for the data connection. Using packet data
access points to download files may involve the
transmission of large amounts of data through your
service provider's network. Contact your service
provider for information about data transmission
charges.
● Parental control — Activate the parental lock for
video services.
● Preferred memory — Select whether downloaded
videos are saved in the device memory or mass
memory. If the selected memory becomes full, the
device saves the content in the other memory, if
available. If there is not enough space in the other
memory, the application automatically deletes
some of the oldest videos.
● Thumbnails — Select whether to view thumbnail
images in video lists.
Nokia Video Centre
43
Music folder
Music player
Music folder
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damag e your
hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be
extremely loud.
Music player supports files formats such as AAC, AAC+,
eAAC+, MP3, and WMA. Music player does not
necessarily support all features of a file format or all
the variations of file formats.
You can also use Music player to listen to podcast
episodes. Podcasting is the method for delivering
audio or video content over the internet using either
RSS or Atom technologies for playback on mobile
devices and PCs.
You can transfer music from other compatible devices
to your device.
device", p. 47.
Play a song or a podcast episode
You may have to refresh the music and podcast
44
libraries after you have updated the song or podcast
selection in your device. To add all available items to
See "Transfer music to your
the library, in the Music player main view, select
Options > Refresh.
To play a song or a podcast episode, do the following:
1. Press
2. Select Music or Podcasts.
3. Select categories to navigate
to the song or podcast episode
you want to hear.
4. To play the selected files, press
To pause playback, press
resume, press
playback, press
, and select Music > Music player.
.
; to
again. To stop
.
To fast forward or rewind, press and hold or
.
To go to the next item,
press
to the beginning of
the item, press
To skip to the previous
item, press
within 2 seconds after
a song or podcast has
started.
To sw itc h r and om pla y (
Shuffle.
To repeat the current item (
switch repeat off, select Options > Repeat.
If you play podcasts, shuffle and repeat are
automatically switched off.
To adjust the volume, press the volume key.
To modify the tone of the music playback, select
Options > Equalizer.
To modify the balance and stereo image or to enhance
bass, select Options > Audio settings.
To view a visualisation during playback, select
Options > Show visualization.
To return to the standby mode and leave the player
playing in the background, press the end key, or to
. To return
.
again
) on or off, select Options >
), all items ( ), or to
switch to another open application, press and hold
.
To close the player, select Options > Exit.
Music menu
Press , and select Music > Music player > Music.
The music menu shows the available music. Select the
desired option in the music menu to view all songs,
sorted songs, or playlists.
When the Music player is playing in the background, to
open the Now playing view, press and hold the
multimedia key.
Playlists
Press , and select Music > Music player > Music.
To view and manage playlists, in the music menu,
select Playlists.
To view details of the playlist, select Options >
Playlist details.
Create a playlist
1. Select Options > Create playlist.
2. Enter a name for the playlist, and select OK.
3. To add songs now, select Yes; or to add the songs
later, select No.
Music folder
45
4. If you select Yes, select artists to find the songs you
want to include in the playlist. Press the scroll key
to add items.
To show the song list under an artist title, scroll
right. To hide the song list, scroll left.
5. When you have made your selections, select Done.
Music folder
The playlist is saved to the mass memory of your
device.
To add more songs later, when viewing the playlist,
select Options > Add songs.
To add songs, albums, artists, genres, and composers
to a playlist from the different views of the music
menu, select an item and Options > Add to a
playlist > Saved playlist or New playlist.
To remove a song from a playlist, select Options >
Remove. This does not delete the song from the
device; it only removes it from the playlist.
To reorder songs in a playlist, scroll to the song you
want to move, and select Options > Reorder list. To
grab songs and drop them to a new position, use the
scroll key.
Podcasts
Press , and select Music > Music player >
Podcasts.
The podcast menu displays the podcasts available in
46
the device.
Podcast episodes have three states: never played,
partially played, and completely played. If an episode
is partially played, it plays from the last playback
position the next time it is played. If an episode is never
played or completely played, it plays from the
beginning.
Home network with music player
You can play content stored in your Nokia device
remotely on compatible devices in a home network.
You can also copy files from your Nokia device to other
devices that are connected to the home network. Home
network must be configured first.
network", p. 78.
Play a song or a podcast remotely
1. Press , and select Music > Music player.
2. Select Music or Podcasts.
3. Select categories to navigate to the song or podcast
episode you want to hear.
4. Select the desired song or podcast and Options >
Play > Via home network.
5. Select the device in which the file is played.
Copy songs or podcasts wirelessly
To copy or transfer media files from your device to
another compatible device in a home network, select
a file and Options > Move and copy > Copy to home
network or Move to home net.. Content sharing does
See "About home
not have to be switched on in the home network
settings.
content", p. 80.
See "Set sharing on and define
Transfer music to your device
You can transfer music from a compatible PC or other
compatible devices using a compatible USB data cable
or Bluetooth connectivity.
PC requirements for music transfer:
● Microsoft Windows XP operating system (or later)
● A compatible version of the Windows Media Player
application. You can get more detailed information
about Windows Media Player compatibility from
your device's product pages on the Nokia website.
● Nokia Nseries PC Suite 1.6 or later
Windows Media Player 10 may cause playback delays
to WMDRM technology protected files after they have
been transferred to your device. Check Microsoft
support website for a hotfix to Windows Media Player
10 or get a newer compatible version of Windows
Media Player.
Transfer music from PC
You can use three different methods to transfer music:
● To view your device on a PC as a mass memory
device where you can transfer any data files, make
the connection with a compatible USB data cable or
Bluetooth connectivity. If you are using the USB
cable, select Data transfer as the connection mode.
● To synchronise music with Windows Media Player,
connect the compatible USB data cable and select
Media player as the connection mode.
● To use Nokia Music Manager in Nokia Nseries PC
Suite, connect the compatible USB data cable and
select PC Suite as the connection mode.
Use Data transfer and Media player modes to transfer
files to the mass memory of your device.
To change the default USB connection mode, press
, and select Tools > Connectivity > USB > USB
mode.
Both Windows Media Player and Nokia Music Manager
in Nokia Nseries PC Suite have been optimised to
transfer music files. For information about transferring
music with Nokia Music Manager, see the help function
on Nokia Nseries PC Suite or visit the Nokia support
pages.
Transfer with Windows Media Player
Music synchronisation functions may vary between
different versions of the Windows Media Player
application. For more information, see the
corresponding Windows Media Player guides and help.
Manual synchronisation
With manual synchronisation, you can select the songs
and playlists that you want to move, copy, or remove.
Music folder
47
1. After your device is connected with Windows Media
Player, select your device in the navigation pane on
the right, if more than one device is connected.
2. In the left navigation pane, browse the music files
on your PC which you want to synchronise.
3. Drag and drop songs to the Sync List on the right.
Music folder
You can see the amount of available memory in your
device above the Sync List.
4. To remove songs or albums, select an item in the
Sync List, right-click, and select Remove from
list.
5. To start the synchronisation, click Start Sync.
Automatic synchronisation
1. To activate the automatic synchronisation function
in Windows Media Player, click the Sync tab, select
Nokia Handset > Set Up Sync..., and check the
Sync this device automatically check box.
2. Select the playlists you want to synchronise
automatically in the Available playlists pane, and
click Add.
The selected items are transferred to the Playlists
to sync pane.
3. To finalise the setup for automatic synchronisation,
click Finish.
When the Sync this device automatically check box
is checked and you connect your device to the PC, the
48
music library in your device is automatically updated
based on the playlists you select for synchronisation in
Windows Media Player. If no playlists have been
selected, the whole PC music library is selected for
synchronisation. If there is not enough free memory in
your device, Windows Media Player selects manual
synchronisation automatically.
To stop automatic synchronisation, click the Sync tab,
and select Stop Sync to 'Nokia Handset'.
Nokia Music Store
In the Nokia Music Store (network service) you can
search, browse, and purchase music to download to
your device. To purchase music, you first need to
register for the service.
To check the Nokia Music Store availability in your
country, visit music.nokia.com.
To access the Nokia Music Store, you must have a valid
internet access point in the device.
To open Nokia Music Store, press
Music > Music store.
To find more music in different categories of the music
menu, select Options > Find in Music store.
Nokia Music Store settings
The availability and appearance of the music store
settings may vary. The settings may also be predefined
and not editable. If the settings are not predefined, you
, and select
may be asked to select the access point to use when
connecting to the music store. To select the access
point, select Default acc. pt..
In the music store, you may be able to edit the settings
by selecting Options > Settings.
Radio
You can use the radio as a traditional FM radio with
automatic tuning and saved stations or with parallel
visual information related to the radio programme on
the display if you tune to stations that offer Visual
Radio service. The Visual Radio service uses packet data
(network service).
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be
extremely loud.
When you open the radio for the first time, a wizard
helps you to save local radio stations (network service).
If you do not have access to the Visual Radio service,
the operators and radio stations in your area may not
support Visual Radio.
Listen to the radio
The FM radio depends on an antenna other than the
wireless device antenna. A compatible headset or
enhancement needs to be attached to the device for
the FM radio to function properly.
Press
Note that the quality of the radio broadcast depends
on the coverage of the radio station in that particular
area.
You can normally make a call or answer an incoming
call while listening to the radio. The radio is muted
when there is an active call.
To start a station search, select
the frequency manually, select Options > Manual
tuning.
If you have previously saved radio stations, to go to the
next or previous saved station, select
To adjust the volume, press the volume key.
To listen to the radio using the loudspeaker, select
Options > Activate loudspeaker.
To view available stations based on location, select
Options > Station directory (network service).
To save the current tuned station to your station list,
select Options > Save station. To open the list of your
saved stations, select Options > Stations.
, and select Music > Radio.
or . To change
or .
Music folder
49
To return to the standby mode and allow the FM radio
to play in the background, select Options > Play in
background.
View visual content
To check availability and costs and to subscribe to the
Music folder
service, contact your service provider.
To view available visual content for a tuned station,
select
visual service ID has not been saved for the station,
enter it, or select Retrieve to se ar ch fo r it in the station
directory (network service).
When the connection to the visual service is
established, the current visual content is displayed.
or Options > Start visual service. If the
Saved stations
To open the list of your saved stations, select
Options > Stations.
To listen to a saved station, select Options >
Station > Listen. To view available visual content for
a station with Visual Radio service, select Options >
Station > Start visual service.
To change station details, select Options > Station >
Edit.
Settings
50
Press , and select Music > Radio.
Select Options > Settings and from the following:
● Start-up tone — Select whether a tone is played
when the application is started.
● Auto-start service — To start Visual Radio
automatically when you select a saved station that
offers Visual Radio service, select Yes.
● Access point — Select the access point used for the
data connection. You do not need an access point to
use the application as an ordinary FM radio.
● Current region — Select the region in which you
are currently located. This setting is displayed only
if there is no network coverage when the
application is started.
Nokia Podcasting
With the Nokia Podcasting application (network
service), you can search, discover, subscribe to, and
download podcasts over the air, and play, manage, and
share audio and video podcasts with your device.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be
extremely loud.
Settings
Before using Nokia Podcasting, set your connection
and download settings.
The recommended connection method is WLAN. Check
with your service provider for terms and data service
fees before using other connections. For example, a flat
rate data plan can allow large data transfers for one
monthly fee.
Connection settings
To edit the connection settings, press , and select
Music > Podcasting > Options > Settings >
Connection. Define the following:
● Default access point — Select the access point to
define your connection to the internet.
● Search service URL — Define the podcast search
service to be used in searches.
Download settings
To edit the download settings, press , and select
Music > Podcasting > Options > Settings >
Download. Define the following:
● Save to — Define the location where you want to
save your podcasts. For optimal use of storage
space, mass memory is recommended.
● Update interval — Define how often podcasts are
updated.
● Next update date — Define the date of the next
automatic update.
● Next update time — Define the time of next
automatic update.
Automatic updates only occur if a specific default
access point is selected and Nokia Podcasting is
running. If Nokia Podcasting is not running, the
automatic updates are not activated.
● Download limit (%) — Define the size of the
memory that is used for podcast downloads.
● If limit exceeds — Define what to do if the
downloads exceed the download limit.
Setting the application to retrieve podcasts
automatically may involve the transmission of large
amounts of data through your service provider’s
network. Contact your service provider for information
about data transmission charges.
To restore the default settings, select Options >
Restore default in the settings view.
Search
Search helps you to find podcasts by keyword or title.
The search engine uses the podcast search service you
set up in Podcasting > Options > Settings >
Connection > Search service URL.
To search for podcasts, press
Podcasting > Search, and enter the desired
keywords.
, select Music >
Music folder
51
Tip: Search looks for podcast titles and keywords
in descriptions, not specific episodes. General
topics, such as football or hip-hop, usually give
better results than a specific team or artist.
To subscribe to marked channels and add them to your
podcasts, select Options > Subscribe. You can also
Music folder
add a podcast by selecting one.
To start a new search, select Options > New search.
To go the website of the podcast, select Options >
Open web page (network service).
To see the details of a podcast, select Options >
Description.
To send selected podcasts to another compatible
device, select Options > Send.
Directories
Directories help you to find new podcast episodes to
which to subscribe.
To open directories, press
Podcasting > Directories.
Contents of the directories change. Select the desired
directory folder to update it (network service). When
the colour of the folder changes, press the scroll key
again to open it.
Directories can include top podcasts listed by
52
popularity or themed folders.
, and select Music >
To open the desired folder topic, press the scroll key. A
list of podcasts is displayed.
To subscribe to a podcast, select the title, and press the
scroll key. After you have subscribed to episodes of a
podcast, you can download, manage, and play them in
the podcasts menu.
To add a new directory or folder, select Options >
New > Web directory or Folder. Select a title, URL of
the .opml (outline processor markup language) file,
and Done.
To edit the selected folder, web link, or web directory,
select Options > Edit.
To import an .opml file stored on your device, select
Options > Import OPML file. Select the location of
the file, and import it.
To send a directory folder as a multimedia message or
using Bluetooth connectivity, select the folder and
Options > Send.
When you receive a message with an .opml file using
Bluetooth connectivity, open the file to save the file
into the Received fo ld er in di rec to rie s. Ope n t he f ol der
to subscribe to any of the links to add to your podcasts.
Downloads
After you have subscribed to a podcast, from
directories, search, or by entering a URL, you can
manage, download, and play episodes in Podcasts.
To see the podcasts you have subscribed to, select
Podcasting > Podcasts.
To see individual episode titles (an episode is a
particular media file of a podcast), select the podcast
title.
To start a download, select the episode title. To
download or to continue to download selected or
marked episodes, select Options > Download or
Continue download. You can download multiple
episodes at the same time.
To play a portion of a podcast during download or after
partial downloading, select the podcast and Options >
Play preview.
Fully downloaded podcasts can be found in the
Podcasts folder, but are not shown until the library is
refreshed.
Play and manage podcasts
To display the available episodes from the selected
podcast, select Options > Open. Under each episode,
you see the file format, the size of the file, and time of
the upload.
When the podcast is fully downloaded, to play the full
episode, select Podcasts > Options > Play, or press
and select Music > Music player > Podcasts.
To update the selected podcast or marked podcasts, for
a new episode, select Options > Update.
To stop the updating, select Options > Stop
update.
To add a new podcast by entering the URL of the
podcast, select Options > New podcast. If you do not
have an access point defined or if during packet data
connection you are asked to enter a user name and
password, contact your service provider.
To edit the URL of the selected podcast, select
Options > Edit.
To delete a downloaded podcast or marked podcasts
from your device, select Options > Delete.
To send the selected podcast or marked podcasts to
another compatible device as .opml files as a
multimedia message or by Bluetooth connectivity,
select Options > Send.
To update, delete, and send a group of selected
podcasts at once, select Options > Mark/Unmark,
mark the desired podcasts, and select Options to
choose the desired action.
To open the website of the podcast (network service),
select Options > Open web page.
Some podcasts provide the opportunity to interact
with the creators by commenting and voting. To
connect to the internet to do this, select Options >
View comments.
Music folder
53
Media folder
RealPlayer
Media folder
With RealPlayer, you can play video clips or stream
media files over the air without saving them to the
device first.
RealPlayer supports files with extensions such as .
3gp, .mp4, or .rm. However, RealPlayer does not
necessarily support all file formats or all the variations
of file formats.
When playback is active, in the landscape view, use the
media keys to control the player.
Play video clips
Press , and select Applications > Media >
RealPlayer.
1. To play a saved media file, select Options >
Open and from the following:
● Most recent clips — Play one of the last six files
played in RealPlayer.
● Saved clip — Play a file saved in Gallery.
2. Scroll to a file, and press the scroll key to play the
file.
54
To adjust the volume, use the volume key.
Stream content over the air
Many service providers require you to use an internet
access point (IAP) for your default access point. Other
service providers allow you to use a WAP access point.
In RealPlayer, you can only open an rtsp:// URL address.
However, RealPlayer plays a .ram file if you open an
http link to it in a browser.
To stream content over the air (network service), select
a streaming link saved in Gallery, on a web page, or
received in a text message or multimedia message.
Before live content begins streaming, your device
connects to the site and starts loading the content. The
content is not saved in your device.
RealPlayer settings
Press , and select Applications > Media >
RealPlayer.
You may receive RealPlayer settings in a special
message from the service provider. For more
information, contact your service provider.
Select Options > Settings and from the following:
● Video — Select whether video clips are
automatically repeated after they finish playing.
● Streaming — Select whether to use a proxy server,
change the default access point, and set the port
range used when connecting. Contact your service
provider for the correct settings.
Adobe Flash Player
Press , and select Applications > Media > Flash
Player.
Use Adobe Flash Player to view, play, and interact with
compatible flash files made for mobile devices.
To open a flash file, scroll to it, and select it.
Nokia Lifeblog
Press , and select Applications > Media >
Lifeblog.
About Nokia Lifeblog
Lifeblog is a combination of software for mobile phone
and PC that keeps a multimedia diary of the items that
you collect with your device. Lifeblog organises your
photos, videos, sounds, text messages, multimedia
messages, and weblog posts into a chronology that
you can browse, search, share, publish, and back up.
Both Nokia Lifeblog PC and Nokia Lifeblog mobile let
you send or blog your items for others to see.
Lifeblog mobile automatically keeps track of your
multimedia items. Use Lifeblog on your device to
browse your items, send them to others, or publish
them on the web. Connect your device to a compatible
PC using a compatible USB data cable or Bluetooth
connectivity to transfer and synchronise the items on
the device with your compatible PC.
Lifeblog PC provides easy browsing and searching of
the items that you collected with your device. With
one-button transfer using a compatible USB data cable
or Bluetooth connectivity, your favourite photos,
videos, text, and multimedia messages are transferred
back to your device.
For safekeeping, you can back up your Nokia Lifeblog
database using the hard disk of your compatible PC,
CDs, DVDs, removable drive, or network drive.
Additionally, you can post items to your weblog (blog).
For more information on weblog services and their
compatibility with Nokia Lifeblog, visit
www.nokia.com/lifeblog, or press F1 in the Nokia
Lifeblog PC application to open the Nokia Lifeblog help.
Installation on your PC
Before you install Nokia Lifeblog on a compatible PC,
you need the following:
● 1 GHz Intel Pentium or equivalent, 128 MB RAM
● 400 MB of available hard disk space (if Microsoft
DirectX and Nokia Nseries PC Suite must be installed)
Media folder
55
● Graphics capability of 1024x768 and 24-bit colour
● 32 MB graphics card
● Microsoft Windows 2000 or Windows XP
To install Nokia Lifeblog on your PC, do the following:
1. Insert the CD-ROM or DVD-ROM supplied with your
device.
Media folder
2. Install Nokia Nseries PC Suite (includes Nokia
connectivity cable drivers for USB connection).
3. Install Nokia Lifeblog for PC.
If Microsoft DirectX 9.0 is not already installed on your
PC, it is installed at the same time with Nokia Lifeblog
for PC.
Connect your device and PC
To connect your device and a compatible PC using a USB
data cable, do the following:
1. Ensure that you have installed Nokia Nseries PC
Suite.
2. Connect the USB data cable to the device and the PC.
The USB mode should be PC Suite.
"USB", p. 38. When you connect your device to the
PC for the first time after you have installed Nokia
Nseries PC Suite, the PC installs the specific driver
for your device. This may take a while.
3. Start the Nokia Lifeblog PC application.
56
See
To connect your device and a compatible PC using
Bluetooth wireless technology, do the following:
1. Ensure that you have installed Nokia Nseries PC
Suite on your PC.
2. Ensure that you have paired your device and the PC
through Bluetooth connectivity with Get
Connected in Nokia Nseries PC Suite.
3. Activate Bluetooth connectivity on your device and
on your PC.
See "Settings", p. 35.
Copy items
To copy new or edited items from your device to your
PC, and copy the selected items from your PC to your
device:
1. Connect your device to the PC.
2. Start the Nokia Lifeblog application on your PC.
3. In the Nokia Lifeblog PC application, select File >
Copy from Phone and to Phone.
The new items from your device are copied to your
PC. The items on the To Phone tab on your PC are
copied to your device.
Browse time line and favourites
Press , and select Applications > Media >
Lifeblog.
When you start Nokia Lifeblog on your device, the time
line view opens and shows your multimedia items.
To open your saved favourites, select Options > View
Favorites.
When you start Nokia Lifeblog on your PC, you have
several ways to move around in the time line and
favourites views. The fastest way is to move the slider
handle forward or backward. Alternatively, click the
time bar to select a date, use the 'Go to date' feature,
or use the arrow keys.
Post to web
Press , and select Applications > Media >
Lifeblog.
To share your best Nokia Lifeblog items, send them to
your weblog on the internet for others to see.
You must first create an account with a weblog service,
create one or more weblogs that you use as the
destination of your posts, and add the weblog account
to Nokia Lifeblog. The recommended weblog service
for Nokia Lifeblog is TypePad from Six Apart,
www.typepad.com.
On your device, to add the weblog account in Nokia
Lifeblog, select Options > Settings > Blog. On your
PC, to edit accounts, select File > Blog Account
Manager....
Post items to the web from your device
1. In Timeline or Favorites, select the items that you
want to post to the web.
2. Select Options > Post to Web.
If you use the feature for the first time, Nokia
Lifeblog retrieves a weblog list from the weblog
server.
The weblog post dialogue opens.
3. Select the weblog you want to use from the Post
to: list. If you have created new weblogs, to update
the weblog list, select Options > Refresh blog
list.
4. Enter a title and a caption for the post. You can also
write a longer story or description in the body text
field.
5. When everything is ready, select Options > Send.
Post items to the web from your PC
1. In the time line or favourites, select the items (a
maximum of 50) that you want to post to the web.
2. Select File > Post to the Web....
3. Enter a title and a caption for the post. You can also
write a longer story or description in the body text
field.
4. Select the weblog that you want to use from the
Post to: list.
5. When everything is ready, click Send.
Media folder
57
Import items
In addition to the .jpg images of your device, you can
also import .jpg images and .3gp and .mp4 video
clips, .amr sound files, and .txt text files from other
sources (such as a compatible CD or DVD, or folders on
the hard disk of your compatible PC) into Nokia
Media folder
Lifeblog.
To import images or videos from a compatible PC to
Nokia Lifeblog for PC, do the following:
1. In the time line or favourites view, select File >
Import from PC....
2. Browse the list to find the image or video file, or
sound or text file from the list, or navigate to other
folders to find the file that you want to import. Use
the Look in list to browse other drives or
appliances.
3. Select a folder, file, or several files. You can view
their content in the preview pane.
4. To import the folder (including subfolders) or the
selected files, click Open.
Activation keys
To vie w the dig ital rig hts a cti vat ion k eys sto red in yo ur
device, press
Actv. keys.
58
Digital rights management
, and select Applications > Media >
Content owners may use different types of digital
rights management (DRM) technologies to protect
their intellectual property, including copyrights. This
device uses various types of DRM software to access
DRM-protected content. With this device you can access
content protected with WMDRM 10, OMA DRM 1.0, and
OMA DRM 2.0. If certain DRM software fails to protect
the content, content owners may ask that such DRM
software's ability to access new DRM-protected
content be revoked. Revocation may also prevent
renewal of such DRM-protected content already in your
device. Revocation of such DRM software does not
affect the use of content protected with other types of
DRM or the use of non-DRM-protected content.
Digital rights management (DRM) protected content
comes with an associated activation key that defines
your rights to use the content.
If your device has OMA DRM protected content, to back
up both the activation keys and the content, use the
backup feature of Nokia PC Suite. Other transfer
methods may not transfer the activation keys which
ne ed to b e re store d with the conte nt for y ou to b e able
to continue the use of OMA DRM protected content after
the device memory is formatted. You may also need to
restore the activation keys in case the files on your
device get corrupted.
If your device has WMDRM protected content, both the
activation keys and the content will be lost if the device
memory is formatted. You may also lose the activation
keys and the content in case the files on your device
get corrupted. Losing the activation keys or the content
may limit your ability to use the same content on your
device again. For more information, contact your
service provider.
Some activation keys may be connected to a specific
SIM card, and the protected content can be accessed
only if the SIM card is inserted in the device.
In the activation keys main view, select from the
following:
● Valid keys — View keys that are connected to one
or more media files and keys whose validity period
has not started yet.
● Invalid keys — View keys that are not valid; the
time period for using the media file is exceeded or
there is a protected media file in the device but no
connected activation key.
● Not in use — View keys that have no media files
connected to them in the device.
To buy more usage time or extend the usage period for
a media file, select an invalid activation key and
Options > Get new key. Activation keys cannot be
updated if web service message reception is disabled.
See "Web service message settings", p. 108.
To view detailed information, such as the validity
status and ability to send the file, scroll to an activation
key, and press the scroll key.
Recorder
Press , and select Applications > Media >
Recorder.
With Recorder, you can record voice memos and
telephone conversations.
To record a telephone conversation, open Recorder
during a voice call. Both parties hear a tone every 5
seconds during recording.
Media folder
59
Camera
Camera
To activate the main camera, press and hold the
capture key, or press
Camera.
To close the main camera, press Exit.
About the camera
Your Nokia N95 8GB has two cameras, a highresolution camera on the back of the device (the main
camera, up to 5 megapixels, in landscape mode) and a
lower resolution camera on the front (the secondary
camera in portrait mode). You can use both cameras to
take still pictures and record videos.
Your device supports an image capture resolution of
2592x1944 pixels. The image resolution in this guide
may appear different.
The images and video clips are automatically saved in
Images & videos in Gallery. The cameras
produce .jpeg images. Video clips are recorded in the
MPEG-4 file format with the .mp4 file extension, or in
the 3GPP file format with the .3gp file extension
(sharing quality).
You can send images and video clips in a multimedia
60
message, as an e-mail attachment, or by using other
, and select Applications >
See "Video settings", p. 69.
connection methods, such as Bluetooth connectivity or
wireless LAN connection. You can also upload them to
a compatible online album.
videos online", p. 78.
To optimise the size of the image or video clip for
sending, select the proper image or video quality from
the camera settings. Check the size limits of MMS and
e-mail messages with your service provider.
See "Share images and
Image capture
To activate the main camera, press and hold the
capture key, or press
Camera.
Still image camera indicators
The still image camera viewfinder displays the
following:
, and select Applications >
1 — Capture mode indicator
2 — Active toolbar. The toolbar is not displayed during
image capture.
3 — Battery charge level indicator
4 — Image resolution indicator, which indicates
whether the quality of the image is Print 5M - Large,
Print 3M - Medium, Print 2M - Medium, E-mail 0.8M
- Med., or MMS 0.3M - Small. The quality of a digitally
zoomed picture is lower than that of an unzoomed
picture.
5 — Image counter, which displays the estimated
number of images you can capture using the current
image quality setting and memory in use. The counter
is not displayed during image capture.
6 — The device memory (
indicators, which show where images are saved
See "Active toolbar", p. 61.
) and mass memory ( )
Active toolbar
The active toolbar provides you with shortcuts to
different items and settings before and after taking a
picture or recording a video. Scroll to items, and select
them by pressing the scroll key. You can also define
when the active toolbar is visible on the display.
The settings in the active toolbar return to the default
settings after you close the camera.
To view the active toolbar before and after taking a
picture or recording a video, select Options > Show
icons. To view the active toolbar only when you need
it, select Options > Hide icons. Only the capture
mode and battery level indicators are shown on the
display. To activate the active toolbar, press the scroll
key. The toolbar is visible for 5 seconds.
Before taking a picture or recording a video, in the
active toolbar, select from the following:
to switch between the video and image modes
to select the scene
to select the flash mode (images only)
to activate the self-timer (images only). See "You in
the picture—self-timer", p. 64.
to activate the sequence mode (images only). See
"Take pictures in a sequence", p. 64.
to select a colour effect
to show or hide the viewfinder grid (images only)
Camera
61
to adjust white balance
to adjust the exposure compensation (images only)
to adjust sharpness (images only)
Camera
to adjust contrast (images only)
to adjust light sensitivity (images only)
The icons change to reflect the current status of the
setting.
The available options vary depending on the capture
mode and view you are in.
picture", p. 63. See "After recording a
video", p. 67. The active toolbar in Gallery has
different options.
See "Active toolbar", p. 72.
See "After taking a
Take pictures
Before taking a picture, note the following:
● To make lighting and colour adjustments, use the
scroll key to scroll through the active toolbar.
"Setup settings—adjust colour and
lighting", p. 68. Saving the captured image may
take longer if you change the zoom, lighting, or
colour settings.
● To free memory for new pictures, transfer files to a
compatible PC using a compatible USB data cable,
for example, and delete the files from your device.
The device informs you when the memory is full, and
62
asks whether you want to change the memory in
use.
See
When taking a picture, note the following:
● Use both hands to keep the camera still.
● The quality of a digitally zoomed picture is lower
than that of a nonzoomed picture.
● The camera goes into the battery saving mode if
there are no keypresses for a moment. To continue
taking pictures, press the capture key.
To take a picture, do the following:
1. If the camera is in the video mode, select the image
mode from the active toolbar.
2. To lock the focus on an
object, press the capture key
halfway down (main camera
only, not available in
landscape and sports
scenes). The green locked
focus indicator appears on
the display. If the focus was
not locked, the red focus
indicator appears. Release
the capture key, and press it halfway down again.
You can, however, take the picture without locking
the focus.
3. To take a picture, press the capture key. Do not
move the device before the image is saved.
To zoom in or out when taking a picture, use the zoom
key in your device.
Tip: To open Gallery and view the pictures you
have taken, press
device twice.
To activate the front camera, select Options > Use
secondary camera. To take a picture, press the scroll
key. To zoom in or out, scroll up or down.
To leave the camera open in the background and use
other applications, press
press and hold the capture key.
on the side of your
. To return to the camera,
After taking a picture
Select the following from the active toolbar (available
only if you select Show captured image > On in the
still image camera settings):
● If you do not want to keep the image, select
Delete (
● To send the image using a multimedia message, e-
mail, or other connection methods, such as
Bluetooth connectivity, press the call key, or select
Send (
This option is not available during an active call.
You can also send the image to a call recipient during
an active call. Select Send to caller (
available during an active call).
● To tag images to the print basket for later printing,
select Add to Print basket (
).
). See "Write and send messages", p. 100.
) (only
).
● To send the image to a compatible online album,
select
account for a compatible online album).
images and videos online", p. 78.
To zoom in an image after taking it, press
open the image in Gallery, and select the zooming
option from the options list.
To use the image as wallpaper in the active standby,
select Options > Set as wallpaper.
To set the image as a call image for a contact, select
Options > Set as contact call img. > Assign to
contact.
To return to the viewfinder to capture a new image,
press the capture key.
(available only if you have set up an
See "Share
to
Flash
The flash is available only in the main camera.
Keep a safe distance when using the flash. Do not use
the flash on people or animals at close range. Do not
cover the flash while taking a picture.
The camera of your device has an LED flash for low light
conditions. The following flash modes are available for
the still image camera: Automatic (
), and Off ( ).
On (
To change the flash mode, in the active toolbar, select
the desired flash mode.
), Red-eye ( ),
Camera
63
Scenes
Scenes are only available in the main camera.
A scene helps you to find the right colour and lighting
Camera
settings for the current environment. The settings of
each scene have been set according to a certain style
or environment.
The default scene in the image mode is Auto, and in
the video mode Automatic (both indicated with
To change the scene, in the active toolbar, select Scene
modes and a scene.
To make your own scene suitable for a certain
environment, scroll to User defined, and select
Options > Change. In the user defined scene you can
adjust different lighting and colour settings. To copy
the settings of another scene, select Based on scene
mode and the desired scene. To save the changes and
return to the scenes list, press Back. To activate your
own scene, scroll to User defined, press the scroll key,
and select Select.
Take pictures in a sequence
The sequence mode is available only in the main
camera.
To set the camera to take six pictures or the desired
number of pictures in sequence (if enough memory is
available), in the active toolbar, select Sequence
64
mode.
To take six pictures, select Burst. To capture the
pictures, press the capture key.
To take two or more pictures in a sequence, select the
desired time interval. To capture pictures using the
selected time interval, press the capture key. To stop
taking pictures, select Cancel. The number of pictures
taken depends on the available memory.
After you take the pictures in the burst mode, they are
).
shown in a grid on the display. To view a picture, press
the scroll key to open it. If you used a time interval, only
the last taken picture is shown on the display. You can
view the other pictures in Images & videos in Gallery.
You can also use the sequence mode with the selftimer.
To return to the sequence mode viewfinder, press the
capture key.
To switch off the sequence mode, in the active toolbar,
select Sequence mode > Single shot.
You in the picture—self-timer
The self-timer is available only in the main camera. Use
the self-timer to delay the capture so that you can
include yourself in the picture.
To set the self-timer delay, in the active toolbar, select
Self timer > 2 seconds, 10 seconds, or 20 seconds.
To activate the self-timer, select Activate. The device
beeps when the timer is running and the quadrangle
blinks just before the image capture. The camera takes
the picture after the selected delay elapses.
To switch off the self-timer, in the active toolbar, select
Self timer > Off.
Tip: In the active toolbar, select Self timer > 2
seconds to keep your hand steady when taking
a picture.
Tips on taking good photographs
Picture quality
Use the appropriate picture quality. The camera has
several picture quality modes. Use the highest setting
to ma ke su re th at th e c am er a p ro du ce s t he be st pi ct ur e
quality available. Note however, that better picture
quality requires more storage space. For multimedia
message (MMS) and e-mail attachments it may be
necessary to use the smallest picture quality mode
optimised for MMS sending. You can define the quality
in the camera settings.
settings", p. 68.
Background
Use a simple background. For portraits and other
pictures with people, avoid having your subject in front
of a cluttered, complex background that may distract
attention from the subject. Move the camera, or the
subject, when these conditions cannot be met. Move
the camera closer to the object to ta ke clearer portraits.
See "Still image camera
Depth
When shooting landscapes and sceneries, add depth to
your pictures by placing objects in the foreground. If
the foreground object is too close to the camera, it may
be blurred.
Lighting conditions
Changing the source, amount, and direction of light
can change photographs dramatically. Here are some
typical lighting conditions:
● Light source behind the subject. Avoid placing your
subject in front of a strong light source. If the light
source is behind the subject or visible in the display,
the resulting picture may have weak contrast, may
be too dark, and may contain unwanted light
effects.
● Sidelit subject. Strong side light gives a dramatic
effect but may be too harsh, resulting in too much
contrast.
● Light source in front of the subject. Harsh sunlight
may cause the subjects to squint their eyes. The
contrast may also be too high.
● Optimal lighting is found in situations where there
is plenty of diffused, soft light available, for
example, on a bright, partially cloudy day or on a
sunny day in the shadow of trees.
Camera
65
Video recording
To activate the main camera, press and hold the
capture key, or press
Camera
Camera.
Video capture indicators
The video viewfinder displays the following:
1 — Capture mode indicator
2 — Audio mute on indicator
3 — Active toolbar. The toolbar is not displayed during
recording.
4 — The battery charge level indicator
5 — Video quality indicator that indicates whether the
quality of the video is TV high quality, TV normal
quality, E-mail high quality, E-mail norm. quality,
or Sharing quality
6 — The video clip file type
66
See "Active toolbar", p. 61.
, and select Applications >
7 — Total available video recording time. When you
are recording, the current video length indicator also
shows the elapsed time and time remaining.
8 — The device memory (
indicators that show where videos are saved
9 — The video stabilisation is turned on (
"Video settings", p. 69.
To display all viewfinder indicators, select Options >
Show icons. Select Hide icons to display only the
video status indicators, and during the recording, the
available record time, zoom bar when zooming, and
the selection keys.
) and mass memory ( )
). See
Record videos
Before recording a video, note the following:
● To make lighting and colour adjustments, scroll
through the active toolbar.
adjust colour and lighting", p. 68. See
"Scenes", p. 64.
● To free memory for new video clips, transfer files to
a compatible PC using a compatible USB data cable,
for example, and remove the files from your device.
The device informs you when the memory is full, and
asks whether you want to change the memory in
use.
To record a video, do the following:
See "Setup settings—
1. If the camera is in the image mode, select the video
mode from the active toolbar.
2. To start recording, press the capture key. The red
record icon (
indicating that recording has started.
3. To pause recording at any time, press Pause. Video
recording automatically stops if recording is set to
pause and there are no keypresses within a minute.
Select Continue to resume recording.
To zoom in or out of the subject, use the zoom key
in your device.
4. To stop recording, select Stop. The video clip is
automatically saved to the Images & videos folder
of Gallery. The maximum length of the video clip
depends on the available memory.
To activate the front camera, select Options > Use
secondary camera. To start recording a video, press
the scroll key. To zoom in or out, scroll up or down.
) is shown and a tone sounds,
● To send the video clip using a multimedia message,
e-mail, or other connection methods, such as
Bluetooth connectivity, press the call key, or select
Send (
See "Send data using Bluetooth
connectivity", p. 36. This option is not available
during an active call. You may not be able to send
video clips saved in the .mp4 file format in a
multimedia message.
You can also send the video clip to a call recipient
du rin g an a cti ve ca ll. Sel ect Send to caller (
available during an active call).
● To upload the video clip to a compatible online
album, select
an account for a compatible online album).
"Share images and videos online", p. 78.
● To return to the viewfinder to record a new video
clip, press the capture key.
). See "Write and send messages", p. 100.
) (only
(only available if you have set up
See
Camera
After recording a video
After you record a video clip, select the following from
the active toolbar (available only if Show captured
video is set to On in the video settings):
● To immediately play the video clip you just recorded,
select Play (
● If you do not want to keep the video, select Delete
).
(
).
Camera settings
There are two kinds of settings for the camera: setup
settings and main settings. The setup settings return
to the default settings after you close the camera, but
the main settings remain the same until you change
them again. To adjust the setup settings, use the
options in the active toolbar.
adjust colour and lighting", p. 68. To change the main
See "Setup settings—
67
settings, in the image or video mode, select Options >
Settings.
Still image camera settings
Camera
To change the main settings, in the image mode, select
Options > Settings and from the following:
● Image quality — Select Print 5M - Large
(2592x1944 resolution), Print 3M - Medium
(2048x1536 resolution), Print 2M - Medium
(1600x1200 resolution), E-mail 0.8M - Med.
(1024x768 resolution), or MMS 0.3M - Small
(640x480 resolution). The better the image quality,
the more memory the image consumes. If you want
to print the image, select Print 5M - Large, Print 3M
- Medium, or Print 2M - Medium. If you want to
send it using e-mail, select E-mail 0.8M - Med.. To
send the image using a multimedia message, select
MMS 0.3M - Small.
These resolutions are only available in the main
camera.
● Add to album — Select whether you want to save
the image to a certain album in Gallery. If you select
Yes, a list of available albums opens.
● Show captured image — Select On if you want to
see the captured image after it is taken or Off if you
want to continue taking pictures immediately.
● Default image name — Define the default name
68
for the captured images.
● Extended digital zoom (main camera only) — On
(continuous) allows the zoom increments to be
smooth and continuous between digital and
extended digital zoom, On (paused) allows the
zoom increments to pause at the digital and
extended digital step point, and Off allows a limited
amount of zoom while retaining the image
resolution.
● Capture tone — Select the tone you want to hear
when you take a picture.
● Memory in use — Select where you want to store
your images.
● Rotate image — Select whether you want images
that are captured when the device is held upright to
be rotated when you open them in Gallery.
● Restore camera settings — Select Yes to return
the default values to the camera settings.
Setup settings—adjust colour and lighting
To enable the camera to reproduce colours and lighting
more accurately or to add effects to your pictures or
videos, scroll through the active toolbar, and select
from the following options:
● Flash mode (
flash mode.
● Color tone (
list.
) (images only) — Select the desired
) — Select a colour effect from the
● White balance ( ) — Select the current lighting
condition from the list. This allows the camera to
reproduce colours more accurately.
● Exposure compensation (
you are shooting a dark subject against a very light
background, such as snow, adjust the exposure to
+1 or +2 to compensate the background brightness.
For light subjects against a dark background, use -1
or -2.
● Sharpness (
sharpness of the image.
● Contrast (
between the lightest and darkest parts of the image.
● Light sensitivity (
light sensitivity in low light conditions to decrease
the risk of images that are too dark.
The screen display changes to match any settings you
make so that you see how the change affects the
pictures or videos.
The available settings vary depending on the selected
camera.
The setup settings are camera specific; if you change
the settings in the secondary camera, the settings in
the main camera do not change. The setup settings are
also shooting mode specific; if you change the settings
in the image mode, the settings in the video mode do
not change. Switching between the modes does not
reset the defined setup settings.
) (images only) — Adjust the
) (images only) — Adjust the difference
) (images only) — Increase the
) (images only) — If
The setup settings return to the default settings when
you close the camera.
If you select a new scene, the colour and lighting
settings are replaced by the selected scene. You can
change the setup settings after selecting a scene if
needed.
Video settings
To change the main settings, in the video mode, select
Options > Settings and from the following:
● Video quality — Set the quality of the video clip to
TV high quality, TV normal quality, E-mail high
quality, E-mail norm. quality (standard quality for
playback through your handset), or Sharing
quality. If you want to view the video on a
compatible TV or PC, select TV high quality or TV
normal quality, which have VGA resolution
(640x480) and the .mp4 file format. You may not be
able to send video clips saved in the .mp4 file format
in a multimedia message. To send the video clip
using a multimedia message, select Sharing
quality, which has QCIF resolution and the .3gp file
format.
● Video stabilization — Select On to reduce camera
shaking when recording the video.
● Audio recording — Select Mute if you do not want
to record sound.
Camera
69
● Add to album — Select whether you want to add
the recorded video clip to a certain album in Gallery.
Select Yes to open a list of available albums.
● Show captured video — Select whether you want
Camera
the first frame of the recorded video clip to be
displayed after the recording stops. Select Play from
the active toolbar (main camera) or Options >
Play (secondary camera) to view the video clip.
● Default video name — Define the default name for
the captured video clips.
● Memory in use — Select where you want to store
your videos.
● Restore camera settings — Select Yes to return
the default values to the camera settings.
70
Gallery
To store and organise your images, video clips, sound
clips, and streaming links, or share your files with other
compatible Universal Plug and Play (UPnP) devices
through wireless LAN (WLAN), press
Gallery.
Tip: If you are in another appl ic ati on , t o v ie w t he
last saved picture in Gallery, press
side of your device. To enter the Images &
videos folder main view, press the review key
again.
View and organise files
Press , and select Gallery.
In Gallery, select Images & videos
Sound clips
, or All files , and press the scroll key to open it.
, Streaming links , Presentations
, and select
on the
, Tracks ,
You can browse and open
folders; and mark, copy, and
move items to folders. You
can also create albums and
mark, copy, and add items to
albums.
"Albums", p. 73.
To open a file, press the scroll
key. Video clips, .ram files, and
streaming links open and play
in RealPlayer, and music and
sound clips in Music player.
See "RealPlayer ", p. 54. See "Music player", p. 44.
See
Images and video clips
View images and videos
To view your images and video clips, press , and
select Gallery > Images & videos.
Pictures taken and video clips recorded with the
camera of your device are stored in Images &
videos. Images and video clips can also be sent to you
in a multimedia message, as an e-mail attachment, or
through Bluetooth connectivity or infrared. To be able
Gallery
71
to view a received image or video clip in Gallery or in
the RealPlayer, you must first save it.
The video clips saved in Nokia Video Centre are not
Gallery
shown in Images & videos in Gallery.
Centre", p. 41.
The images and video
clip files in Images &
videos are in a loop
and ordered by date
and time. The number
of files is displayed. To
browse the files one
by one, scroll left or
right. To browse files
in groups, scroll up or down.
To open a file, press the scroll key. When an image is
opened, to zoom in the image, press the zoom key on
the side of your device. The zooming ratio is not stored
permanently.
If you want the display to be automatically rotated
based on the orientation of the device, set the display
rotation on in the settings.
settings", p. 134.
To edit a video clip or a photo, select Options > Edit.
See "Edit images", p. 74.
To print your images on a compatible printer, select
72
Options > Print.
See "Image print", p. 76. You can
See "Personalisation
See "Nokia Video
also tag images for later printing to the print basket in
Gallery.
See "Print basket", p. 73.
Organise images and videos
To add an image or a video clip to an album in Gallery,
select Options > Albums > Add to album.
"Albums", p. 73.
To tag an image for later printing, select the image and
Add to Print basket from the active toolbar.
basket", p. 73.
To use the picture as a background image, select the
picture and Options > Use image > Set as
wallpaper.
To delete an image or video clip, select Options >
Delete.
Some of the options may also be available through the
active toolbar (available when you open an image or a
video clip).
See "Active toolbar", p. 72.
See
See "Print
Active toolbar
In the Images & videos folder, you can use the active
toolbar as a shortcut to different tasks. The active
toolbar is available only when you have selected an
image or a video clip.
In the active toolbar, scroll up or down to different
items, and select them by pressing the scroll key. The
available options vary depending on the view you are
in and whether you have selected an image or a video
clip.
The settings in the active toolbar return to the default
settings after you close the camera.
If you want the active toolbar to always be visible on
the display, select Options > Show icons.
To view the active toolbar only when you need it, select
Options > Hide icons. To activate the active toolbar,
press the scroll key.
Select from the following:
to play the selected video clip
to send the selected image or video clip
to upload the selected image or video clip to a
compatible online album (only available if you have set
up an account for a compatible online album).
"Share images and videos online", p. 78.
or to add or remove an image from the print
See "Print basket", p. 73.
basket.
to print the viewed image
to start a slide show of your images
to delete the selected image or video clip
The available options may vary depending on the view
you are in.
See
Albums
With albums, you can conveniently manage your
images and video clips. To view the albums list in
Gallery, select Images & videos > Options >
Albums > View albums.
To create a new album, in the albums list view, select
Options > New album.
To add a picture or a video clip to an album in Gallery,
scroll to a picture or video clip, and select Options >
Albums > Add to album. A list of albums opens.
Select the album to which you want to add the picture
or video clip. The item you added to the album is still
visible in Images & videos in Gallery.
To remove a file from an album, open the album, scroll
to the file, and press C. The file is not deleted from
Images & videos in Gallery.
Print basket
You can tag images to the print basket, and print them
later with a compatible printer or in a compatible
printing kiosk, if available.
The tagged images are indicated with
videos and albums.
To tag an image for later printing, select an image, and
Add to Print basket from the active toolbar.
To view the images in the print basket, select
Images & videos ( av a il a bl e on l y w h e n y o u h a ve a dd e d
See "Image print", p. 76.
in Images &
from
Gallery
73
pictures to the print basket), or Options > Print >
View Print basket.
To remove an image from the print basket, select an
Gallery
image in Images & videos or in an album, and
Options > Remove from basket.
● Zoom and pan — to make the slide show move
smoothly from one slide to another, and let Gallery
randomly zoom in and out in the images
To decrease or increase the volume during the slide
show, use the volume key in your device.
Slide show
To view your images as a slide show, select an image
in Gallery, and Start slide show (
toolbar. The slide show starts from the selected file.
To view only the selected images as a slide show, select
Options > Mark/Unmark > Mark to mark images,
and Options > Slide show > Start to start the slide
show.
Select from the following:
● Pause — to pause the slide show
● Continue — to resume the slide show, if paused
● End — to close the slide show
To browse the images, scroll left or right.
Before starting the slide show, adjust the slide show
settings. Select Options > Slide show > Settings,
and from the following:
● Music — to add sound to the slide show. Select
On or Off.
● Song — to select a music file from the list
● Delay between slides — to adjust the tempo of
74
the slide show
) in the active
Edit images
Image editor
To edit the pictures after taking them or the ones
already saved in Gallery, select Options > Edit. The
image editor opens.
Select Options > Apply effect to open a grid where
you can select different edit options indicated by small
icons. You can crop and rotate the image; adjust the
brightness, colour, contrast, and resolution; and add
effects, text, clip art, or a frame to the picture.
Crop image
To crop an image, select Options > Apply effect >
Crop, and a predefined aspect ratio from the list. To
crop the image size manually, select Manual.
If you select Manual, a cross appears in the upper left
corner of the image. Use the scroll key to select the area
to crop, and select Set. Another cross appears in the
lower right corner. Again select the area to be cropped.
To adjust the first selected area, select Back. The
selected areas form a rectangle that forms the cropped
image.
If you select a predefined aspect ratio, select the upper
left corner of the area to be cropped. To resize the
highlighted area, use the scroll key. To freeze the
selected area, press the scroll key. To move the area
within the picture, use the scroll key. To select the area
to be cropped, press the scroll key.
Reduce red-eye
To reduce red-eye in an image, select Options >
Apply effect > Red eye reduction.
Move the cross onto the eye, and press the scroll key.
A loop appears on the display. To resize the loop to fit
the size of the eye, use the scroll key. To reduce the
redness, press the scroll key. When you finish editing
the image, press Done.
To save the changes, and return to Images & videos,
press Back.
Useful shortcuts
You can use the following shortcuts when editing
images:
● To view a full-screen image, press *. To return to the
normal view, press * again.
● To rotate an image clockwise or counterclockwise,
press 3 or 1.
● To zoom in or out, press 5 or 0.
● To move on a zoomed image, scroll up, down, left,
or right.
Edit videos
To edit video clips in Gallery, scroll to a video clip, and
select Options > Edit and an editing option.
The video editor supports .3gp and .mp4 video file
formats, and .aac, .amr, .mp3, and .wav audio file
formats. It does not necessarily support all features of
a file format or all the variations of file formats.
TV-out mode
To view the captured images and video clips on a
compatible TV, use a Nokia Video Connectivity Cable.
Before viewing the images and video clips on TV, you
may need to configure the TV-out settings for the
applicable TV system and TV aspect ratio.
"Enhancement settings", p. 135.
To watch images and video clips on TV, do the
following:
1. Connect a Nokia Video Connectivity Cable to the
video input of a compatible TV.
2. Connect the other end of the Nokia Video
Connectivity Cable to the Nokia AV Conn ector of your
device.
See
Gallery
75
3. You may need to select the cable mode.
4. Press
and the file you want to view.
Gallery
The images are
shown in the
image viewer, and
the video clips are
played in
RealPlayer.
All audio, including
the active calls,
stereo video clip sound, key tone, and ringing tone is
routed to the TV when the Nokia Video Connectivity
Cable is connected to the device. You can use the device
microphone normally.
For all applications other than the Images & videos
folder in Gallery and RealPlayer, the TV screen displays
what is displayed on the screen of your device.
The opened image is displayed in full-screen on the TV.
When you open an image in the thumbnail view while
it is viewed on the TV, zooming in is not available.
When you open a highlighted video clip, RealPlayer
starts playing the video clip on the device display and
the TV screen.
You can view images as a slide show on TV. All items in
an album or marked images are displayed on the TV in
full-screen while the selected music plays.
76
show", p. 74.
, and select Gallery > Images & videos
See "RealPlayer ", p. 54.
See "Slide
Presentations
With presentations, you can view SVG (scalable vector
graphics) files, such as cartoons and maps. SVG images
maintain their appearance when printed or viewed
with different screen sizes and resolutions.
To view SVG files, press
Presentations. Scroll to an image, and select
Options > Play. To pause playing, select Options >
Pause.
To zoom in, press 5. To zoom out, press 0.
To rotate the image 90 degrees clockwise or
counterclockwise, press 1 or 3, respectively. To rotate
the image 45 degrees, press 7 or 9.
To switch between full and normal screen, press *.
, and select Gallery >
Print images
Image print
To print images with Image print, select the image you
want to print, and the print option in Gallery, camera,
image editor, or image viewer.
Use Image print to print your images using a
compatible USB data cable, or Bluetooth connectivity.
You can also print images using wireless LAN.
You can only print images that are in .jpeg format. The
pictures taken with the camera are automatically
saved in .jpeg format.
Printer selection
To print images with Image print, select the image you
want to print, and the print option in Gallery, camera,
image editor, or image viewer.
When you use Image print for the first time, a list of
available compatible printers is displayed after you
select the image. Select a printer. The printer is set as
the default printer.
To print to a printer compatible with PictBridge,
connect the compatible data cable before you select
the print option, and check that the data cable mode
is set to Image print or Ask on connection.
"USB", p. 38. The printer is automatically displayed
when you select the print option.
If the default printer is not available, a list of available
printing devices is displayed.
To change the default printer, select Options >
Settings > Default printer.
See
Print preview
After you select the printer, the selected images are
displayed using predefined layouts.
To change the layout, scroll left or right to browse
through the available layouts for the selected printer.
If the images do not fit on a single page, scroll up or
down to display the additional pages.
Print settings
The available options vary depending on the
capabilities of the printing device you selected.
To set a default printer, select Options > Default
printer.
To select the paper size, select Paper size, the size of
paper from the list, and OK. Select Cancel to return to
the previous view.
Print online
With Print online, you can order prints of images online
directly to your home or to a store where you can pick
them up. You can also order different products with the
selected image, such as mugs or mouse pads. The
available products depend on the service provider.
To use Print online, you must have at least one printing
service configuration file installed. The files can be
obtained from printing service providers that support
Print online.
For more information on the application, see the
guides available at the Nokia product support pages or
your local Nokia website.
Gallery
77
Share images and videos online
Gallery
You can share images and video clips in compatible
online albums, weblogs, or in other compatible online
sharing services on the web. You can upload content,
save unfinished posts as drafts and continue later, and
view the content of the albums. The supported content
types may vary depending on the service provider.
Before sharing images and videos online, you must
subscribe to the service with an online image sharing
service provider, and create a new account. You can
usually subscribe to the service on the web page of the
service provider. Contact your service provider for
details on subscribing to the service.
To upload a file from Gallery to the online service, press
, and select Gallery > Images & videos. Scroll to
the desired file, and select Options > Send > Post
to web, or s el e ct t he f il e an d
For more information on the application and
compatible service providers, see the Nokia product
support pages or your local Nokia website.
78
from the active toolbar.
Home network
About home network
Your device is compatible with Universal Plug and Play
architecture (UPnP). Using a wireless LAN (WLAN)
access point device or a WLAN router, you can create a
home network and connect compatible UPnP devices
that support WLAN to the network, such as your device,
a compatible PC, a compatible printer, and a
compatible sound system or TV, or a sound system or
TV equipped with a compatible wireless multimedia
receiver.
To use the WLAN function of your device in a home
network, you must have a working WLAN home
connection setup and have other UPnP enabled home
devices to connect to the same home network.
"Wireless LAN", p. 32.
The home network uses the security settings of the
WLAN connection. Use the home network feature in a
WLAN infrastructure network with a WLAN access point
device and encryption enabled.
You can share media files saved in Gallery with other
compatible UPnP devices using the home network. To
manage your home network settings, press
select Tools > Connectivity > Home media. You can
also use the home network to view, play, copy, or print
compatible media files from Gallery.
share media files", p. 80.
See "View and
See
, and
Your device is connected to the home network only if
you accept a connection request from another
compatible device, or in Gallery, select the option to
view, play, print, or copy media files on your device or
search for other devices in the Home network folder.
Important security information
When you configure your WLAN home network, enable
an encryption method on your access point device,
then on the other devices you intend to connect to your
home network. Refer to the documentation of the
devices. Keep any passcodes secret and in a safe place
separate from the devices.
You can view or change the settings of the WLAN
internet access point in your device.
points", p. 142.
If you use the ad hoc operating mode to create a home
network with a compatible device, enable one of the
encryption methods in WLAN security mode when
you configure the internet access point.
"Connection settings", p. 141. This step reduces the
risk of an unwanted party joining the ad hoc network.
Your device notifies you if another device attempts to
connect to it and the home network. Do not accept
connection requests from an unknown device.
If you use WLAN in a network that does not have
encryption, switch off sharing your files with other
See "Access
See
devices, or do not share any private media files. See
"Settings for home network", p. 79.
Settings for home network
To share media files saved in Gallery with other
compatible UPnP devices through WLAN, you must
create and configure your WLAN home internet access
point, then configure the settings for home network in
the Home media application.
access points", p. 33. See "Connection
settings", p. 141.
The options related to home network are not available
in applications before the settings in the Home
media application have been configured.
When you access the Home media application for the
first time, the setup wizard opens and helps you define
the home network settings for your device. To use the
setup wizard later, in the Home media main view,
select Options > Run wizard, and follow the
instructions on the display.
To connect a compatible PC to the home network, on
the PC, you must install the related software. You get
the software from the CD-ROM or DVD-ROM supplied
with your device, or you can download it from the
device support pages on the Nokia website.
Configure settings
See "WLAN internet
Gallery
79
To configure the settings for home network, select
Tools > Connectivity > Home media > Settings
and from the following:
Gallery
● Home access point — Select Always ask if you
want the device to ask for the home access point
every time you connect to the home network,
Create new to define a new access point that is used
automatically when you use the home network, or
None. If your home network does not have WLAN
security settings enabled, you get a security
warning. You can continue and switch the WLAN
security on later; or cancel defining the access point
and first switch on the WLAN security.
points", p. 142.
● Device name — Enter a name for your device that
is shown to the other compatible devices in the
home network.
● Copy to — Select the memory where you want to
save copied media files.
Set sharing on and define content
Select Tools > Connectivity > Home media >
Share content and from the following:
● Content sharing — Allow or deny sharing media
files with compatible devices. Do not set content
sharing on before you have configured all the other
settings. If you set content sharing on, the other
80
UPnP compatible devices in the home network can
view and copy your files you have selected for
See "Access
sharing in the Images & videos folder. If you do not
want the other devices to access your files, set
content sharing off.
● Images & video — Select media files for sharing
with other devices, or view the sharing status of
images and videos. To update the content of the
folder, select Options > Refresh content.
● Music — Select playlists for sharing with other
devices, or view the sharing content of playlists. To
update the content of the folder, select Options >
Refresh content.
View and share media files
To share your media files with other UPnP compatible
devices in the home network, set content sharing on.
See "Set sharing on and define content", p. 80. If
content sharing is off in your device, you can still view
and copy the media files stored in another home
network device if it is allowed by the other device.
Show media files stored in your device
To show your images, videos, and sound clips in
another home network device, such as a compatible
TV, do the following:
1. In Ga llery, select an image, video cl ip, or sound clip,
and Options > Show via home network.
2. Select a compatible device in which the media file
is shown. The images are shown both in the other
home network device and your device, and the
video clips and sound clips are played only in the
other device.
3. To stop sharing, select Options > Stop showing.
Show media files stored in the other device
To show media files that are stored on another home
network device in your device (or in a compatible TV,
for example), do the following:
1. Press
Home media > Browse home. Your device starts
the search of other compatible devices. Device
names start to appear on the display.
2. Select a device from the list.
3. Select the type of media you want to view from the
other device. The available file types depend on the
features of the other device.
To search files with different criteria, select
Options > Find. To sort the found files, select
Options > Sort by.
4. Select the media file or folder you want to view.
5. Press the scroll key, and select Play or Show, and
On device or Via home network.
6. Select the device in which the file is shown.
To adjust the volume when playing a video or sound
clip, scroll left or right.
To stop sharing the media file, select Back or Stop
(available when playing videos and music).
, and select Tools > Connectivity >
Tip: You can print images saved in Gallery
through a home network with a UPnP
compatible printer.
Content sharing does not have to be switched on.
See "Image print", p. 76.
Copy media files
To copy or transfer media files from your device to
another compatible device, such as a UPnP compatible
PC, select a file in Gallery and Options > Move and
copy > Copy to home network or Move to home
net.. Content sharing does not have to be switched on.
To copy or transfer files from the other device to your
device, select a file in the other device and the desired
copying option from the options list. Content sharing
does not have to be switched on.
Gallery
81
Positioning (GPS)
About GPS
The Global Positioning System (GPS) is a worldwide
radio navigation system that includes 24 satellites and
their ground stations that monitor the operation of the
Positioning (GPS)
satellites. Your device has an internal GPS receiver.
A GPS terminal receives low-power radio signals from
the satellites and measures the travel time of the
signals. From the travel time, the GPS receiver can
calculate its location to the accuracy of meters.
The coordinates in the GPS are expressed in degrees
and decimal degrees format using the international
WGS-84 coordinate system.
The Global Positioning System (GPS) is operated by the
government of the United States, which is solely
responsible for its accuracy and maintenance. The
accuracy of location data can be affected by
adjustments to GPS satellites made by the United
States government and is subject to change with the
United States Department of Defense civil GPS policy
and the Federal Radionavigation Plan. Accuracy can
also be affected by poor satellite geometry. Availability
and quality of GPS signals may be affected by your
location, buildings, natural obstacles, and weather
82
conditions. The GPS receiver should only be used
outdoors to allow reception of GPS signals.
Any GPS should not be used for precise location
measurement, and you should never rely solely on
location data from the GPS receiver and cellular radio
networks for positioning or navigation.
Your device also supports Assisted GPS (A-GPS).
Assisted GPS (A-GPS) is used to retrieve assistance data
over a packet data connection, which assists in
calculating the coordinates of your current location
when your device is receiving signals from satellites.
A-GPS is a network service.
Your device is preconfigured to use the Nokia A-GPS
service, if no service provider specific A-GPS settings are
available. The assistance data is retrieved from the
Nokia A-GPS service server only when needed.
You must have a packet data internet access point
defined in the device to retrieve assistance data from
the Nokia A-GPS service. To define an access point for
A-GPS, press
General > Positioning > Positioning server >
Access point. A wireless LAN access point cannot be
used for this service. The packet data internet access
, and select Tools > Settings >
point is asked when GPS is used for the first time in your
device.
To enable or disable different positioning methods,
such as Bluetooth GPS, press
Settings > General > Positioning > Positioning
methods.
, and select Tools >
GPS receiver
The GPS receiver is located in the bottom of the device.
When using the receiver, slide the numeric keypad
open, and from an upright position, move the device
to an angle of about 45 degrees, with an unobstructed
view of the sky. Do not cover the numeric keypad with
your hand.
Establishing a GPS
connection may take
from a couple of seconds
to several minutes.
Establishing a GPS
connection in the car may
take longer.
The GPS receiver draws
its power from the device
battery. Using the GPS receiver may drain the battery
faster.
About satellite signals
If your device cannot find the satellite signal, consider
the following:
● If you are indoors, go outdoors to receive a better
signal.
● If the numeric keypad slide is closed, open it.
● If you are outdoors, move to a more open space.
● Ensure that your
hand does not
cover the GPS
antenna of your
device.
See "GPS
receiver", p. 83.
● If the weather
conditions are
bad, the signal
strength may be affected.
● If the power saver turns on while the device is
attempting to establish a GPS connection, the
attempt is interrupted.
● Establishing a GPS connection may take from a
couple of seconds to several minutes.
Satellite status
To check how many satellites your device has found,
and whether your device is receiving satellite signals,
press
, and select Tools > Connectivity > GPS
Positioning (GPS)
83
data > Position > Options > Satellite status. Or,
in the Maps application, select Options > Map
options > Satellite info.
If your device has found
satellites, a bar for each
satellite is shown in the
satellite info view. The longer
the bar, the stronger the
satellite signal. When your
Positioning (GPS)
device has received enough
data from the satellite signal
to calculate the coordinates of
your location, the bar turns
black.
Initially your device must
receive signals from at least
four satellites to be able to
calculate the coordinates of
your location. When the initial
calculation has been made, it
may be possible to continue
calculating the coordinates of
your location with three
satellites. However, the
accuracy is generally better when more satellites are
found.
84
Position requests
You may receive a request from a network service to
receive your position information. Service providers
may offer information about local topics, such as
weather or traffic conditions, based on the location of
your device.
When you receive a position request, a message is
displayed showing the service that is making the
request. Select Accept to allow your position
information to be sent or Reject to deny the request.
Maps
About Maps
Press , and select Maps.
With Maps, you can see your current location on the
map, browse maps for different cities and countries,
search for addresses and different points of interest,
plan routes from one location to another, and save
locations as landmarks and send them to compatible
devices.
You can also purchase extra services, such as guides
and a turn-by-turn navigation service with voice
guidance.
Maps uses GPS. You can define the positioning methods
used with your device in the device settings.
"Positioning settings", p. 138. For the most accurate
See
location information, use either the internal GPS or a
compatible external GPS receiver.
When you use Maps for the first time, you may need to
define an internet access point for downloading map
information for your current location. To change the
default access point later, select Options >
Settings > Network > Default access point.
Almost all digital cartography is inaccurate and
incomplete to some extent. Never rely solely on the
cartography provided for use in this device.
Downloading maps may involve the transmission of
large amounts of data through your service provider's
network. Contact your service provider for information
about data transmission charges.
Tip: You can also download maps by using a
wireless LAN connection or through the internet
using Nokia Map Loader PC software.
"Download maps", p. 86.
To receive a note when your device registers to a
network outside your home cellular network, select
Options > Settings > Network > Roaming
warning > On. Contact your network service provider
for details and roaming costs.
See
Browse maps
The map coverage varies by country.
When you open the Maps application, Maps zooms in
to the location that was saved from your last session.
If no position was saved from the last session, the Maps
application zooms in to the capital city of the country
you are in based on the information the device receives
from the cellular network. At the same time, the map
of the location is downloaded, if it has not been
downloaded during previous sessions.
To establish a GPS connection and zoom in to your
current location, select Options > Find place > GPS
position [0], or press 0
A GPS indicator
you browse maps. When the device tries to establish a
GPS connection, the circles are yellow. When the device
receives enough data from the satellites to calculate
the coordinates of your current location, the circles
turn green.
To view information about satellites when you are
using Maps, select Options > Map options >
Satellite info.
Your current location is indicated on the map with
is shown on the display when
Positioning (GPS)
.
85
To move on the map, scroll up,
down, left, or right.
To zoom in or out, press * or
#.
To switch between the 2D and
3D views, select Options >
Map options > 2D/3D.
To find a location, select
Positioning (GPS)
Options > Find place. You
can choose to go to your GPS
position, find an address, find
a point of interest by entering a keyword, find locations
nearby, or browse a guide (extra service).
To use a location on the map, for example, as a starting
point for a nearby search, to plan a route, view its
details, or start navigation (extra service), press the
scroll key, and select the desired option.
When you browse the map on the display, for example,
move to another country, a new map is downloaded
automatically. These downloaded maps are free of
charge, but downloading may involve the transmission
of large amounts of data through your service
provider's network. For more information on data
transmission charges, contact your service provider.
The maps are automatically saved in the device
memory.
86
To define what kinds of points of interest are shown
on the map, select Options > Map options >
Categories and the desired categories.
To save a location as a landmark, in the desired
location, press the scroll key, select Save > As
landmark, enter a name for the landmark, and select
the categories you want to include it in. To take a
screen shot of your location, select Save > As
image. The screen shot is saved in Gallery. To send the
screen shot, in Gallery, select the screen shot, and
from the active toolbar.
To view saved landmarks, select Options > Find
place > Landmark.
To send a landmark to a compatible device, in the
landmarks view, press the scroll key, and select Send.
If you send the landmark in a text message, the
information is converted to plain text.
To adjust the network, routing, and general settings,
select Options > Settings.
Download maps
When you browse the map on the display, for example,
move to another country, a new map is downloaded
automatically. These downloaded maps are free of
charge, but downloading may involve transmission of
large amounts of data through your service provider's
network. For more information on data transmission
charges, contact your service provider.
You can view the amount of transferred data from the
data counter (kB) shown on the display. The counter
shows the amount of network traffic when you browse
maps, create routes, or search for locations online.
To prevent the device from automatically downloading
maps through the internet, for example, when you are
outside your home cellular network, select Options >
Settings > Network > Use network > Never.
To define how much of the mass memory you want to
use for saving maps data or voice guidance files, select
Options > Settings > Network > Max. mass mem.
use (%). When the memory is full, the oldest map data
is deleted. The saved maps data can be deleted using
Nokia Map Loader PC software.
Nokia Map Loader
Nokia Map Loader is PC software that you can use to
download and install maps for different countries to
your device from the internet. You can also use it to
download voice files for turn-by-turn navigation.
To use Nokia Map Loader, you must first install it to a
compatible PC. You can download the PC software from
the internet at www.nokia.com/maps. Follow the
instructions on the screen.
You must use the Maps application before using Nokia
Map Loader. Nokia Map Loader uses the Maps history
information to check the version of map data to be
downloaded.
After you have installed the PC software to your PC, to
download maps, do the following:
1. Connect your device to the PC by using a compatible
USB data cable. Select Data transfer as the USB
connection mode.
2. Open Nokia Map Loader in your PC. Nokia Map
Loader checks the version of map data to be
downloaded.
3. Select the maps or voice guidance files you want,
and download and install them to your device.
Find a place
To view points of interest near your current location or
other locations on the map, select Options > Find
place > Nearby and a category.
To search for a point of interest by name, select
Options > Find place > Keyword search or start
entering the first letters of the name, and select Find.
To search for a location by address, select Options >
Find place > By address. You must enter the city and
country. To use an address you have saved to a contact
card in Contacts, select Options > Find place > By
address > Options > Select from contacts.
To vi ew a se arc h r esu lt on the map, press the scroll key,
and select Show on map. To return to the results list,
select Back.
Positioning (GPS)
87
To view a list of your previous locations, select
Options > Find place > Recent.
Plan a route
To plan a route from one location to another (for
example, from your home to your office), do the
following:
1. Scroll to a point on the map, press the scroll key,
Positioning (GPS)
and select Route from.
2. Scroll to From, and select Options > Select and
the desired option.
To adjust the routing settings, such as the mode of
transportation, select Options > Settings >
Routing.
3. To select the destination, scroll to To, and select
Options > Select and the desired option.
4. To view the route itiner ary, select Options > Show
route. The route is calculated using the selected
routing settings.
To view the itinerary route on the map, select
Options > Show on map.
To run a simulation of the route, select Options >
Start simulation.
Tip: You can also use a compatible GPS receiver
with Bluetooth connectivity with Maps. For
88
example, in a car, an external GPS receiver can be
positioned so that it has a clear view of the sky.
Enable the use of an external GPS receiver in
positioning settings.
settings", p. 138.
See "Positioning
Extra services for Maps
You can purchase and download different kinds of
guides, such as city and travel guides, for different
cities to your device. You can also purchase a turn-byturn navigation service with voice guidance to use it in
Maps.
The downloaded guides are automatically saved to
your device.
The licence you purchase for a guide or navigation is
device-specific and cannot be transferred from your
device to another device.
Navigation
To purchase a navigation service with voice guidance
to use in Maps, select Options > Extra services >
Add navigation.
After purchasing the navigation upgrade, the service is
available through Maps.
After creating a route in Maps, to start navigation to
the desired destination with GPS using voice guidance,
select Options > Start navigation.
route", p. 88. You can also start navigation by selecting
any location on the map or in a results list, and
Navigate to.
See "Plan a
When you use navigation for the first time, you are
prompted to select the language of the voice guidance
and download the voice guidance files of the selected
language. You can also download voice guidance files
using Nokia Map Loader.
To change the language later, in the Maps main view,
select Options > Settings > General > Voice
guidance and a language, and download the voice
guidance files for the selected language.
To discard the created route and use another route,
select Options > Alternative route.
To view only the next turns and hide the map, select
Options > Map options > Arrow mode.
To stop navigation, select Options > Stop
navigation.
See "Download maps", p. 86.
Guides
To purchase and download different kinds of guides,
such as city and travel guides, for different cities to your
device, select Options > Extra services > Guides.
The guides provide information about attractions,
restaurants, hotels, and other points of interest. The
guides must be downloaded and purchased before
use.
To browse a downloaded guide, on the My guides tab
in Guides, select a guide and a subcategory (if
available).
To download a new guide to your device, in Guides,
scroll right to the Nearest guides or All guides tab,
select the desired guide, and press Yes. The purchase
process starts automatically. You can pay for the guides
through a credit card or have the amount charged to
your phone bill (if supported by your cellular network
service provider).
To confirm the purchase, select OK twice. To receive a
confirmation of the purchase through e-mail, enter
your name and e-mail address, and select OK.
Landmarks
Press , and select Tools > Connectivity >
Landmarks.
With Landmarks, you can save the position information
of specific locations in your device. You can sort the
saved locations into different categories, such as
business, and add other information to them, such as
addresses. You can use your saved landmarks in
compatible applications, such as GPS data and Maps.
GPS coordinates are expressed in degrees and decimal
degrees format using the international WGS-84
coordinate system.
To create a new landmark, select Options > New
landmark. To make a positioning request for your
current location, select Current position. To enter the
Positioning (GPS)
89
position information manually, select Enter
manually.
To edit or add information to a saved landmark (for
example, a street address), scroll to a landmark, and
select Options > Edit. Scroll to the desired field, and
enter the information.
To view the landmark on the map, select Options >
Show on map. To create a route to the location, select
Positioning (GPS)
Options > Navigate using map.
You can sort your landmarks into preset categories,
and create new categories. To edit and create new
landmark categories, scroll right in Landmarks, and
select Options > Edit categories.
To add a landmark to a category, scroll to the landmark
in Landmarks, and select Options > Add to
category. Scroll to each category to which you want to
add the landmark, and select it.
To send one or several landmarks to a compatible
device, select Options > Send. Your received
landmarks are placed in the Inbox folder in Messaging.
GPS data
GPS data is designed to provide route guidance
information to a selected destination, position
information about your current location, and traveling
information, such as the approximate distance to the
90
destination and approximate duration of travel.
Press , and select Tools > Connectivity > GPS
data.
The coordinates in the GPS are expressed in degrees
and decimal degrees format using the international
WGS-84 coordinate system.
To use GPS data, the GPS receiver of your device must
initially receive position information from at least four
satellites to calculate the coordinates of your location.
When the initial calculation has been made, it may be
possible to continue calculating the coordinates of
your location with three satellites. However, the
accuracy is generally better when more satellites are
found.
Route guidance
Press , and select Tools > Connectivity > GPS
data > Navigation.
Start the route guidance outdoors. If started indoors,
the GPS receiver may not receive the necessary
information from the satellites.
Route guidance uses a rotating compass on the device
display. A red ball shows the direction to the
destination, and the approximate distance to it is
shown inside the compass ring.
Route guidance is designed to show the straightest
route and the shortest distance to the destination,
measured in a straight line. Any obstacles on the route,
such as buildings and natural obstacles, are ignored.
Differences in altitude are not taken into account when
calculating the distance. Route guidance is active only
when you move.
To set your trip destination, select Options > Set
destination and a landmark as the destination, or
enter the latitude and longitude coordinates. Select
Stop navigation to clear the destination set for your
trip.
Retrieve position information
Press , and select Tools > Connectivity > GPS
data > Position.
In the position view, you can view the position
information of your current location. An estimate of
the accuracy of the location is displayed.
To save your current location as a landmark, select
Options > Save position. Landmarks are saved
locations with more information, and they can be used
in other compatible applications and transferred
between compatible devices.
Trip meter
Press , and select Tools > Connectivity > GPS
data > Trip distance.
Select Options > Start to activate trip distance
calculation, and Stop to deactivate it. The calculated
values remain on the display. Use this feature outdoors
to receive a better GPS signal.
Select Reset to set the trip distance and time and
average and maximum speeds to zero, and to start a
new calculation. Select Restart to set the odometer
and total time to zero.
The trip meter has limited accuracy, and rounding
errors may occur. Accuracy can also be affected by
availability and quality of GPS signals.
Positioning (GPS)
91
Personalise your device
You can personalise your device by changing the
standby mode, main menu, tones, themes, or font size.
Most of the personalisation options, such as changing
the font size, can be accessed through the device
settings.
See "Personalisation settings", p. 134.
Themes
Personalise your device
Press , and select Tools > Settings > General >
Personalization > Themes.
You can change the look of the display, such as the
wallpaper and icons.
To change the theme that is used for all the
applications in your device, select General.
To preview a theme before activating it, select
Options > Preview. To activate the theme, select
Options > Set. The active theme is indicated by
The themes in the mass memory of your device are
indicated by
To change the layout of the main menu, select Menu
view.
92
.
To open a browser connection and download more
themes, in General or Menu view, select Download
themes (network service).
Important: Use only services that you trust and
that offer adequate security and protection against
harmful software.
To edit the wallpaper and power saver of the current
theme that appear in the standby mode, select
Wallpaper to change the background image or Power
saver to change the power saver.
Profiles—set tones
Press , and select Tools > Profiles.
You can set and customise the ringing tones, message
alert tones, and other tones for different events,
.
environments, or caller groups.
To change the profile, select a profile, and Options >
Activate. To also change the profile, press the power
key in the standby mode. Scroll to the profile you want
to activate, and select OK.
Tip: To switch between the general and silent
profiles in the standby mode, press and hold #.
To modify a profile, scroll to the profile, and select
Options > Customize. Scroll to the setting you want
to change, and press the scroll key to open the choices.
Tones stored in the mass memory of your device are
indicated with
In the tones list, select Download sounds (network
service) to open a list of bookmarks. You can select a
bookmark and start connection to a web page to
download more tones.
If you want the caller’s name to be spoken when your
device rings, select Options > Customize, and set Say
caller's name to On. The caller’s name must be saved
in Contacts.
To create a new profile, select Options > Create
new.
.
3-D tones
Press , select Tools > Utilities > 3-D tones.
With 3-D tones, you can enable three-dimensional
sound effects for ringing tones. Not all ringing tones
support 3-D effects.
To enable the 3-D effects, select 3-D ringing tone
effects > On. To change the ringing tone, select
Ringing tone and the desired ringing tone.
To change the 3-D effect that is applied to the ringing
tone, select Sound trajectory and the desired effect.
To modify the effect, select from the following settings:
● Trajectory speed — Scroll left or right to adjust the
speed at which sound moves from one direction to
another. This setting is not available for all ringing
tones.
● Reverberation — Select the type of echo.
● Doppler effect — Select On to have the ringing tone
sound louder when you are closer to your device,
and softer when you are farther away. When you get
closer to the device, the ringing tone appears to
become louder, and softer when you move away
from it. This setting is not available for all ringing
tones.
To listen to the ringing tone with the 3-D effect, select
Options > Play tone. If you enable the 3-D tones but
do not select any 3-D effect, stereo widening is applied
to the ringing tone.
To adjust the ringing tone volume, select Tools >
Profiles > Options > Customize > Ringing
volume.
Modify the standby mode
To switch the active standby on or off, press , and
select Tools > Settings > General >
Personalization > Standby mode > Active
Personalise your device
93
standby. The active standby display shows
application shortcuts, and
events from applications such
as calendar and player.
To change the selection key
shortcuts or the default
shortcut icons in the active
standby mode, select Tools >
Settings > General >
Personalization > Standby
mode. Some shortcuts may
be fixed, and you cannot
Personalise your device
change them.
To change the clock shown in the standby mode, press
, and select Applications > Clock > Options >
Settings > Clock type.
You can also change the standby mode background
image or what is shown in the power saver.
"Themes", p. 92.
Modify the main menu
To change the main menu view, in the main menu,
select Options > Change Menu view > Grid or
List.
To rearrange the main menu, in the main menu, select
Options > Move, Move to folder, or New folder. You
94
can move less used applications into folders and place
applications that you use more often into the main
menu.
To use animated icons in your device, in the main
menu, select Options > Icon animation > On.
See
Time management
Clock
Alarm clock
Press , and select Applications > Clock.
To set a new quick alarm, select Options > New quick
alarm. Quick alarms are set for the next 24 hours and
they cannot be repeated.
To view your active and inactive alarms, scroll right to
the alarm tab. To set a new alarm, select Options >
New alarm. Define the repetition, if needed. When an
alarm is active,
To turn off the sounding alarm, select Stop. To stop the
alarm for 5 minutes, select Snooze.
If the alarm time is reached while the device is
switched off, the device switches itself on and starts
sounding the alarm tone. If you select Stop, the device
asks whether you want to activate the device for calls.
Select No to switch off the device or Yes to make and
receive calls. Do not select Yes when wireless phone
use may cause interference or danger.
To cancel an alarm, select Options > Remove
alarm.
is shown.
To change the time, date, and clock t ype settings, select
Options > Settings.
To allow the mobile phone ne twork to update the time,
date, and time zone information to your device
(network service), in the settings, select Network
operator time > Auto-update.
World clock
Press , and select Applications > Clock.
To open the world clock view, scroll right to the world
clock tab. In the world clock view, you can view the
time in different cities. To add cities to the list, select
Options > Add city. You can add a maximum of 15
cities to the list.
To set your current city, scroll to a city, and select
Options > Set as current city. The city is displayed in
the clock main view, and the time in your device is
changed according to the city selected. Ensure that the
time is correct and matches your time zone.
Time management
95
Calendar
Create a calendar entry
Press , and select Applications > Calendar.
1. To add a new calendar
entry, scroll to the desired
date, and select
Options > New entry
and one of the following:
Time management
● Meeting — to remind
you of an appointment
that has a specific date
and time
● Memo — to write a
general entry for a day
● Anniversary — to
remind you of birthdays or special dates (entries
are repeated annually)
● To-do — to remind you of a task that must be
done by a specific date
2. Fill in the fields. To set an alarm, select Alarm >
On, and enter the alarm time and date.
To add a description for an entry, select Options >
Add description.
3. To save the entry, select Done.
96
Tip: In the day, week, or month calendar view,
press any key (1-0). An appointment entry opens,
and the characters you enter are added to the
subject field. In the to-do view, a to-do note entry
opens.
When the calendar alarm sounds for a note, select
Silence to turn off the calendar alarm tone. The
reminder text stays on the screen. To stop the calendar
alarm, select Stop. To set the alarm to snooze, select
Snooze.
Calendar views
To change the starting day of the week or the view that
is shown when you open the calendar, select
Options > Settings.
To go to a certain date, select Options > Go to date.
To jump to today, press #.
To switch between the month view, week view, day
view, and to-do view, press *.
To send a calendar note to a compatible device, select
Options > Send.
If the other device is not compatible with Coordinated
Universal Time (UTC), the time information of received
calendar entries may not be displayed correctly.
To modify the calendar, select Options > Settings >
Calendar alarm tone, Default view, Week starts
on, or Week view title.
Manage calendar entries
To delete several events at a time, go to the month
view, and select Options > Delete entry > Before
date or All entries.
To mark a task as completed, scroll to it in the to-do
view, and select Options > Mark as done.
You can synchronise your calendar with a compatible
PC using Nokia Nseries PC Suite. When creating a
calendar entry, set the desired synchronisation option.
Time management
97
Messaging
Only devices that have compatible features can receive
Messaging
and display multimedia messages. The appearance of
a message may vary depending on the receiving
device.
Messaging main view
Press , and select Messaging (network service).
To create a new message, select New message.
Messaging contains the following folders:
Inbox — Received messages, except e-mail and
●
cell broadcast messages, are stored here.
●
My folders — Organise your messages into
folders.
Tip: To avoid rewriting messages that you send
often, use texts in the Templates folder in My
folders. You can also create and save your own
templates.
●
Mailbox — Connect to your remote mailbox to
retrieve your new e-mail messages, or view your
previously retrieved e-mail messages offline.
●
Drafts — Draft messages that have not been
98
sent are stored here.
● Sent — The last messages that have been sent,
excluding messages sent using Bluetooth
connectivity or infrared, are stored here. You can
change the number of messages to save in this
folder.
●
Outbox — Messages waiting to be sent are
temporarily stored in the outbox, for example, when
your device is outside network coverage.
●
Reports — You can request the network to send
you a delivery report of the text messages and
multimedia messages you have sent (network
service).
To enter and send service requests (also known as USSD
commands), such as activation commands for network
services, to your service provider, select Options >
Service command in the Messaging main view.
Cell broadcast (network service) allows you to receive
messages on various topics, such as weather or traffic
conditions, from your service provider. For available
topics and relevant topic numbers, contact your service
provider. In the Messaging main view, select
Options > Cell broadcast.
Cell broadcast messages cannot be received in UMTS
networks. A packet data connection may prevent cell
broadcast reception.
Write text
Your device supports traditional text input and
predictive text input. With predictive text, you can
enter any letter with a single keypress. Predictive text
input is based on a built-in dictionary to which you can
add new words.
When you write text,
text using traditional text input and
predictive text input.
Traditional text input
Press a number key (1–9) repeatedly until the desired
character appears. There are more characters available
for a number key than are printed on the key.
If the next letter is located on the same key as the
present one, wait until the cursor appears (or scroll
right to end the time-out period), and enter the letter.
To insert a space, press 0. To move the cursor to the
next line, press 0 three times.
Predictive text input
With predictive input, you can enter any letter with a
single keypress. Predictive text input is based on a
built-in dictionary to which you can add new words.
is displayed when you write
when using
1. To activate predictive text input for all editors in the
device, press
text.
2. To write the desired word, press the keys 2–9. Press
each key only once for one letter. For example, to
write "Nokia" when the English dictionary is
selected, press 6 for N, 6 for o, 5 for k, 4 for i, and
2 for a.
The word suggestion changes after each keypress.
3. When you finish writing the word correctly, scroll
right to confirm it, or press 0 to add a space.
If the word is not correct, press * repeatedly to view
the matching words the dictionary has found one
by one, or press
Matches.
If the ? character is shown after the word, the word
is not in the dictionary. To add a word to the
dictionary, select Spell, enter the word using
traditional text input, and select OK. The word is
added to the dictionary. When the dictionary is full,
a new word replaces the oldest added word.
4. Start writing the next word.
To turn predictive text input off for all editors in the
device, press
, and select Activate predictive
, and select Predictive text >
, and select Predictive text > Off.
Messaging
99
Tips on text input
To insert a number in the letter mode, press and hold
the desired number key.
To switch between the letter and number mode, press
Messaging
and hold #.
To switch between the different character modes,
press #.
To delete a character, press C. To d elet e more than one
character, press and hold C.
The most common punctuation marks are available
under 1. To scroll them through one by one, press 1,
and then * repeatedly.
To open a list of special characters, press *.
Tip: To select several special characters from the
special characters list, press 5 after each
highlighted character.
Change the writing language
When you are writing text, you can change the writing
language. For example, if you are writing text using a
non-Latin alphabet and want to write Latin characters,
such as e-mail or web addresses, you may need to
change the writing language.
To change the writing language, select Options >
Writing language and a writing language that uses
100
Latin characters.
After changing the writing language, for example, if
you press 6 repeatedly to reach a specific character,
changing the writing language gives you access to
characters in a different order.
Edit text and lists
To copy and paste text, while pressing and holding
, scroll left or right to highlight text. To copy the text
to the clipboard, while still holding
insert the text into a document, press and hold
select Paste.
To mark an item in a list, scroll to it, and press
the scroll key at the same time.
To mark multiple items in a list, press and hold
you scroll up or down. To end the selection, stop
scrolling, and release
.
, select Copy. To
, and
and
while
Write and send messages
Press , and select Messaging.
Before you can create a multimedia message or write
an e-mail, you must have the correct connection
settings in place.
settings", p. 103.
The wireless network may limit the size of MMS
messages. If the inserted picture exceeds this limit, the
device may make it smaller so that it can be sent by
MMS.
See "Define the e-mail
Loading...