NH-U12F | Installation Manual
Item
NH-U12F
Type
4x Heatpipe-Cooler
with Fan
Language
EN
www.noctua.at
geräuschoptimierte Premium-Komponenten
sound-optimised premium components
Noctua aims at establishing a new level of quality and performance
“Designed in Austria” through paying attention to the users’ needs in a market
burdened with all kinds of frills and furbelows and providing sound-optimised
premium components, which serve their purpose in a smart, precise and reliable
manner.
Competence through cooperation
Noctua arises from a cooperation between the Austrian Rascom Computerdistribution Ges.m.b.H and the Taiwanese Kolink International Corporation
and entertains a development partnership with the Austrian Institute of Heat
Transmission and Fan Technology (Österreichisches Institut für Wärmeübertragung und Ventilatorentechnik, ÖIWV). These connections form the key
to the achievement of our goal: The partnership with the ÖIWV permits the
application of scientific measurement instrumentation, methods of calculation and simulation technology in the R&D process. Rascom’s long, customeroriented experience in developing and distributing sound-optimised highend products ensures a clear focus on the users’ needs. The use of Kolink’s
advanced manufacturing technology and ultra-modern production plants allows
us to efficiently implement our technical edge and provide solutions of the highest
standard in quality and performance at a fair price.
www.noctua.at | www.rascom.at | www.coolink.com.tw | www.oeiwv.at
3x 2 Stepped spring screws
Congratulations on your new
Noctua NH-U cooler!
You have chosen a sound-optimised premium-quality cooler that offers superior
performance at minimum noise levels. In order to achieve the best coolingresults possible, please follow the instructions given in this manual.
Please first check the box contents according to the first chapter of this manual.
The next 3 chapters give you a detailed step-by-step tutorial on how to install
the Noctua NH-U on socket LGA775, K8 (754, 939, 940) and AM2.
The last chapter contains information on warranty and support in case you have
any further questions.
A multilingual version of this manual is available an our website :
http://www.noctua.at
Your Noctua-Team.
Contents
Chapter 1
Box Contents
Chapter 2
LGA 775 Installation
Chapter 3
K8 (Socket 754, 939, 940) Installation
Chapter 4
AM2 Installation
Chapter 5
Warranty & Support
Page
2
3 - 5
5 - 7
7 - 9
10
Item
Noctua NH-U12F
Type
4x Heatpipe-Cooler with Fan
Dimensions
151.5 x 126.0 x 94.5.0 mm
Fan Speed / Acoustical Noise
800/1200 RPM, 8/17 dB(A)
Weight Material
790g Copper/Aluminium
Socket Range
AM2, K8 (754, 939, 940), LGA775
[ Congratulations][ Noctua NH-U12F ]
1
NH-U12F | Installation Manual
3x 2 Stepped spring screws
Chapter 1
Box Contents
Please first check the box contents according to the following lists and
illustrations.
The following items are included in delivery:
LGA 775
Short screws
Washers
4x red, thin
washers
(LGA, K8)
Mainboard Backplates
AM2 K8
8x
short
screws
4x white, thin
washers
(AM2)
short screws
with higher
thread pitch
(AM2 only)
4x red, thick
washers
(AM2)
1x Heatsink
NH-U12F
2x Anti-Vibration Strips
2x Pressure springs
1x Fan
NF-S12-1200
1 Tube of high-grade thermal paste
1x Mounting tool
LGA 775 Backplate
K8 Backplate AM2 Backplate
Mounting bars (LGA775 & AM2)
LGA 775 AM2
Fastening Brackets
4x Steel-clips for
fan-mounting
1x Ultra-Low-Noise-Adapter
U.L.N.A.
Standard fastening brackets
[ Box Contents ][ Noctua NH-U12F ]
2
90° fastening brackets
(K8 & AM2 only)
Chapter 2
LGA775
Installation
NH-U12F | Installation Manual
If your mainboard uses a retention module for CPU cooler installation, you have
to remove it first. Should you experience any difficulties, please consult your
mainboard’s manual. If your previous CPU cooler is attached using a different
mounting mechanism, please remove it according to its manual.
Step 2:
Attaching the backplate on the back side of the mainboard
Place the backplate on the back side of the mainboard, aligning the backplate’s
screw sockets with the mainboard’s screwholes.
Caution: The rubber foam square of the LGA backplate has to face the mainboard. Don’t remove the white protection film!
Mounting hardware:
8x Short screws
1x LGA-backplate
(black, x-shaped without cut-out)
2x Long mounting bars
(fitting the backplane)
4x Red, thin
washers
2x
Standard fastening brackets
2x Pressure springs
Caution: Don’t forget to put 4 washers between the mainboard and the
mounting bars to avoid damage to the mainboard.
Choose the alignment of the mounting bars according to the desired final
orientation of the cooler:
2x
Short, silver-coloured springscrews
Step 1:
Removing the mainboard and retention module
In case you want to use the NH-U on an assembled system, you first have to
remove the mainboard from the case as the cooler has to be screwed together
with the backplate on the back side of the mainboard.
Orientation A Orientation B
[ LGA775 Installation ][ Noctua NH-U12F ]
3
Caution: Make sure that the straight sides of the mounting bars face
the socket and the bulgings are pointing outwards.
Now screw the mounting bars to the backplate using small screws and
washers.
NH-U12F | Installation Manual
Step 4:
Applying thermal paste
If there are traces of thermal paste or thermal pads on your CPU, please clean
them off first. Spread a thin coating of the supplied thermal paste on the CPU.
Caution: Applying too much thermal paste will lower the heat conductivity and
cooling performance!
Step 5:
Attaching the heatsink to the CPU
Caution: Peel off the protection film at the bottom side of the heatsink first!
Place the heatsink on the CPU, so that the mounting holes of the fastening
brackets screwed to the base of the cooler align with those of the mounting bars.
Now screw the fastening brackets to the mounting bars employing the pressure
springs and the respective screws
Step 3:
Attaching the fastening brackets to the heatsink
Tightly screw the fastening brackets to the copper base of the heatsink using 4
short screws.
Caution: Tighten the screws until they stop.
Step 6:
Attaching the fan
First stick the 2 anti-vibration strips onto the cooling fins in order to
dampen minor vibrations emitted by the fan.
[ LGA775 Installation][ Noctua NH-U12F ]
4
NH-U12F | Installation Manual
Then attach the fan to the heatsink using 2 steel clips, placing it so that
it blows onto the heatsink (You can optionally use the second pair of clips
to install a second fan).
Depending on the orientation of the cooler, the fan should either blow towards
the rear side of the case or the power supply in accordance with the airflow
within the case.
Mounting hardware:
1x K8-backplate (silver-coloured, rectangular with 2 rectangular cut-outs
in the center)
Connect the fan to the mainboard, power supply or fan controller. Depending
on your CPU and the temperature inside the case, you may interconnect the
supplied Ultra-Low-Noise Adapter (U.L.N.A.) in order to further reduce the fan’s
operating noise.
Caution: When using the U.L.N.A., check the temperature of your CPU
using appropriate software (e.g. the respective applications of your mainboard
manufacturer), in order to evade automatic throttling of the CPU due to the
increased temperature. If the cooling performance is insufficient, please increase
case ventilation or remove the U.L.N.A.
2x Long, black springscrews
4x Short Screws 2x Pressure springs
2x Standard
fastening brackets
Step 1:
2x 90°-
Fastening brackets
Removing the mainboard and retention module
In case you want to use the NH-U on an assembled system, you first have to
remove the mainboard from the case as the cooler has to be screwed together
with the backplate on the back side of the mainboard.
Chapter 3
K8
(Socket 754, 939,
940) Installation
If your mainboard uses a retention module for CPU cooler installation, you have
to remove it first. Should you experience any difficulties, please consult your
mainboard’s manual. If your previous CPU cooler is attached using a different
mounting mechanism, please remove it according to its manual.
Step 2:
Attaching the backplate on the back side of the mainboard
Place the K8 backplate on the back side of the mainboard, so that the backplate’s screw sockets stick out through the mainboard’s screwholes.
[ K8 (Socket 754, 939, 940) Installation ][ Noctua NH-U12F ]
5
NH-U12F | Installation Manual
Caution: As the fastening brackets are screwed directly to the backplate
on K8 mainboards, no mounting bars are requiered.
Step 3:
Attaching the fastening brackets to the heatsink
Chose the fastening brackets according to the desired orientation of the
cooler.
Step 4:
Applying thermal paste
If there are traces of thermal paste or thermal pads on your CPU, please clean
them off first. Spread a thin coating of the supplied thermal paste on the CPU.
Caution: Applying too much thermal paste will lower the heat conductivity and
cooling performance!
Step 5:
Attaching the heatsink to the CPU
Caution: Peel off the protection film at the bottom side of the heatsink first!
Place the heatsink on the CPU, so that the mounting holes of the fastening brackets screwed to the base of the cooler align with those of the
mainboard and the backplate.
Now screw the fastening brackets to the backplate employing the pressure springs and the respective screws.
Socket-Orientation A
When employing the 90° fastening brackets, please use the supplied
mounting-tool to tighten the springscrews.
When using the 90° fastening
brackets, first stick the spring screws
and springs into the fastening
brackets. Then screw them to the
copper base of the heatsink tightly
using 4 short screws.
When using the standard fastening
brackets, tightly screw them to the
copper base of the heatsink using 4
short screws.
Caution: Tighten the screws until they stop.
[ K8 (Socket 754, 939, 940) Installation ][ Noctua NH-U12F ]
6
Step 6:
Attaching the fan
First stick the 2 anti-vibration strips onto the cooling fins in order to
dampen minor vibrations emitted by the fan.
NH-U12F | Installation Manual
Chapter 4
AM2
Installation
Then attach the fan to the heatsink using 2 steel clips, placing it so that
it blows onto the heatsink (You can optionally use the second pair of clips
to install a second fan).
Depending on the orientation of the cooler, the fan should either blow towards
the rear side of the case or the power supply in accordance with the airflow
within the case.
Connect the fan to the mainboard, power supply or fan controller. Depending
on your CPU and the temperature inside the case, you may interconnect the
supplied Ultra-Low-Noise Adapter (U.L.N.A.) in order to further reduce the fan’s
operating noise.
Mounting hardware:
2x Standard
fastening brackets
4x Short
screws
1x AM2 backplate
2x Short mounting bars (fitting the
backplane)
2x 90° -
fastening brackets
4xShort screws
with higher
thread pitch
(from the
AM2 bag)
Caution: When using the U.L.N.A., check the temperature of your CPU
using appropriate software (e.g. the respective applications of your mainboard
manufacturer), in order to evade automatic throttling of the CPU due to the
increased temperature. If the cooling performance is insufficient, please increase
case ventilation or remove the U.L.N.A.
2x
Pressure springs
4x White, thin washers
(from the AM2 bag)
[ AM2 Installation ][ Noctua NH-U12F ]
7
2x Mid-sized, silver
springscrews
4x Red, thick washers
(from the AM2 bag)
NH-U12F | Installation Manual
Step 1:
Removing the mainboard and retention module
In case you want to use the NH-U on an assembled system, you first have to
remove the mainboard from the case as the cooler has to be screwed together
with the backplate on the back side of the mainboard.
If your mainboard uses a retention module for CPU cooler installation, you have
to remove it first. Should you experience any difficulties, please consult your
mainboard’s manual. If your previous CPU cooler is attached using a different
mounting mechanism, please remove it according to its manual.
Step 2:
Attaching the backplate on the back side of the mainboard
Place the backplate on the back side of the mainboard, aligning the backplate’s
screw sockets with the mainboard’s screwholes.
Caution: Don’t forget to put 4 washers between the mainboard and the
mounting bars to avoid damage to the mainboard.
Put the 4 white, thin washers under the mounting bars and the 4 red,
thick washers onto the mounting bars. Now screw the mounting bars
to the backplate using the small screws with higher thread-pitch (from
the AM2 bag).
Step 3:
Attaching the fastening brackets to the heatsink
Chose the fastening brackets according to the desired orientation of the
cooler.
Caution: Make sure that the bulgings of the mounting bars are
pointing towards the socket.
Socket-Orientation A Socket-Orientation B
When using the 90° fastening
brackets, first stick the spring screws
and springs into the fastening
brackets. Then screw them to the
copper base of the heatsink tightly
using 4 short screws.
[ AM2 Installation ][ Noctua NH-U12F ]
8
When using the standard fastening
brackets, tightly screw them to the
copper base of the heatsink using 4
short screws (not those with higher
thread pitch from the AM2 bag!).
NH-U12F | Installation Manual
Step 4:
Applying thermal paste
If there are traces of thermal paste or thermal pads on your CPU, please clean
them off first. Spread a thin coating of the supplied thermal paste on the CPU.
Caution: Applying too much thermal paste will lower the heat conductivity and
cooling performance!
Step 5:
Attaching the heatsink to the CPU
Caution: Peel off the protection film at the bottom side of the heatsink first!
Place the heatsink on the CPU, so that the mounting holes of the fastening
brackets screwed to the base of the cooler align with those of the mounting
bars.
Now screw the fastening brackets to the mounting bars employing the
pressure springs and the respective screws.
Step 6:
Attaching the fan
First stick the 2 anti-vibration strips onto the cooling fins in order to
dampen minor vibrations emitted by the fan.
Then attach the fan to the heatsink using 2 steel clips, placing it so that
it blows onto the heatsink (You can optionally use the second pair of
clips to install a second fan).
When employing the 90° fastening brackets, please use the supplied
mounting-tool to tighten the springscrews.
Caution: Tighten the screws until they stop.
Depending on the orientation of the cooler, the fan should either blow towards
the rear side of the case or the power supply in accordance with the airflow
within the case.
Connect the fan to the mainboard, power supply or fan controller. Depending
on your CPU and the temperature inside the case, you may interconnect the
supplied Ultra-Low-Noise Adapter (U.L.N.A.) in order to further reduce the fan’s
operating noise.
Caution: When using the U.L.N.A., check the temperature of your CPU using appropriate software (e.g. the respective applications of your mainboard
manufacturer), in order to evade automatic throttling of the CPU due to the
increased temperature. If the cooling performance is insufficient, please increase
case ventilation or remove the U.L.N.A.
[ AM2 Installation ][ Noctua NH-U12F ]
9
Warranty
NH-U12F | Installation Manual
Chapter 5
Warranty
& Support
Even with high-grade products and strict quality control, the possibility of defects
cannot be eliminated entirely. Therefore, we aim at providing the highest possible level of dependability and convenience by offering a warranty period of up
to 60 months and direct, fast and straightforward RMA service.
In addition to the implied warranty, your Noctua NH-U cooler has a 3 years
manufacturer’s guarantee as well as an option to extend warranty up to 5 years
at no additional cost by joining the Noctua Extended Warranty Program. To
participate, free registration is required at www.noctua.at.
In case of warranty, you can either request RMA at your retailer or use our Direct
RMA Service. For further information, please consult www.noctua.at.
Support
For all enquiries concerning your Noctua NH-U cooler, both your retailer and
the international Noctua support team at support@noctua.at are at your
service.
Please also note the FAQ section on our homepage www.noctua.at, where we
elaborate on questions that frequently arise in connection with our products.
[ Warranty & Support ][ Noctua NH-U12F ]
10
Loading...