Nobel 120/2, 160/2, 200/3, 160/2.6, 200/4 Maintenance Manual
...
Solar water heaters
Installation, maintenance & use instructions
TECHNICAL MANUAL
3
CLASSIC
Nobel Xilinakis D. & Co preserves the right to change all specications of the products and their accessories without prior notice
CONTENTS
DOMESTIC HOT WATER CONSUMPTION ............................................................................................................... 4
SOLAR WATER HEATER OPERATION - WATER HEATING ..................................................................................... 4
SOLAR WATER HEATERS ......................................................................................................................................... 5
LABELING ................................................................................................................................................................... 5
PACKAGING ............................................................................................................................................................... 6
WATER STORAGE TANK SPECIFICATIONS ............................................................................................................ 7
COLLECTOR APOLLON AL SPECIFICATIONS ........................................................................................................ 8
SOLAR WATER HEATER 120lt/2m
2
LAYOUT .......................................................................................................... 10
SOLAR WATER HEATER 160lt/2m
2
LAYOUT .......................................................................................................... 11
SOLAR WATER HEATER 160lt/2.6m
2
LAYOUT ....................................................................................................... 12
SOLAR WATER HEATER 160lt/3m
2
LAYOUT .......................................................................................................... 13
SOLAR WATER HEATER 200lt/2.6m
2
LAYOUT ....................................................................................................... 14
SOLAR WATER HEATER 200lt/3m
2
LAYOUT .......................................................................................................... 15
SOLAR WATER HEATER 200lt/4m
2
LAYOUT .......................................................................................................... 16
SOLAR WATER HEATER 320lt/4m
2
LAYOUT .......................................................................................................... 17
GENERAL INSTALLATION RULES ..........................................................................................................................18
INSTALLATION POSITION ....................................................................................................................................... 19
GENERAL PREVENTION MEASURES .................................................................................................................... 20
SUPPORT BASE ASSEMBLY ON A FLAT SURFACE (System with 1 collector) ...................................................... 21
SUPPORT BASE ASSEMBLY ON FLAT SURFACE (System with 2 collectors) ....................................................... 24
SUPPORT BASE ASSEMBLY ON AN INCLINED SURFACE (System with 1 collector) ........................................... 27
SUPPORT BASE ASSEMBLY ON AN INCLINED SURFACE (System with 2 collectors) ......................................... 28
HYDRAULIC CONNECTION ..................................................................................................................................... 33
CLOSED LOOP FILLING .......................................................................................................................................... 33
ELECTRICAL CONNECTION ................................................................................................................................... 34
SYSTEM INSTALLATION ON A TILED ROOF WITH THE WATER STORAGE
TANK UNDER THE ROOF (NATURAL CIRCULATION OPERATION) ..................................................................... 35
CONNECTING THE HEAT CHARGER ..................................................................................................................... 35
POSSIBLE PROBLEMS - SOLUTIONS .................................................................................................................... 36
SERVICE - MAINTENANCE ..................................................................................................................................... 37
POST INSTALLATION INSTRUCTIONS ................................................................................................................... 38
CHECK LIST ............................................................................................................................................................. 39
METEOROLOGICAL DATA OF EUROPEAN CITIES ............................................................................................... 40
NOTES ...................................................................................................................................................................... 41
4
Nobel Xilinakis D. & Co preserves the right to change all specications of the products and their accessories without prior notice
NOBEL, Xilinakis D. & Co Industry is active in the Solar Energy Field since 1975, always with high-tech equipment,
ultra-modern facilities and certied products of high quality. Our experience and know-how support our co operations,
before and after sales, both in Greece and abroad.
In the present manual you will nd all necessary instructions with regard to the installation, operation and
maintenance of NOBEL Solar Water Heaters.
Nowadays, the necessity for production and saving of energy without at the same time polluting the
environment has become common knowledge. The planet’s conventional energy resources are diminishing to a
threatening level as our society’s energy requirements are increasing, generating pollutants that affect the climate’s
balance.
Renewable energy sources promise a solution to the energy problem as well as to pollution. Gradually, the
international legislation is changing and encouraging - or even imposing - the use of alternative energy products, with
the aim to satisfy energy requirements without endangering the environment.
DOMESTIC HOT WATER CONSUMPTION
Statistically, it is estimated that the mean family consumption is 35 to 50 litres daily per person. If we add the
consumption of a washing machine and a dishwasher, when these are connected to the solar water storage tank,
then each requires 20 litres per day (per wash).
Thus, a family of four, for example, with a mean hot water consumption of 40 litres per person, needs an 160
litres solar water heater. If household appliances connected to the solar water heater are added, then the demand
increases by at least 40 litres daily. In order to take full advantage of the solar water heater, maximum use of hot water
should be made during daytime, so that the system can continuously produce hot water during the daylight hours,
maintaining thus its maximum efciency.
SOLAR WATER HEATER OPERATION - WATER HEATING
The collecting surface absorbs solar energy and heats the liquid (water or antifreeze mixture) that circulates in the
water element. This liquid when heated becomes lighter and is directed to the water storage tank where it heats the
water. The ow of the collector’s liquid is accomplished naturally and not forced (thermosiphonic ow).
The factors that affect the temperature of the water supplied by a solar system are many and their values vary according
to the season, the time of day and the location. Keeping in mind that the solar system is a system that is exposed to
the weather conditions, basic parameters affecting its performance are the mains water temperature, the available
solar energy and the ambient temperature. The mains water does not have a constant temperature throughout the
year, being much colder in winter compared to summer. Considering 45°C as a satisfactory temperature for the
domestic hot water (in order to full the needs of a home) and based on statistic values, in winter the temperature
of the mains water has to be increased by approximately 35°C, whereas during the summer the increase is 20°C.
Similarly, the available solar energy does not remain the same throughout the year, being much less in the winter
months than in the summer months. During periods of reduced sunlight and low ambient temperatures, the solar
water storage tank assures the preheating of the water and is assisted by an electrical heating element or the
central heating water storage tank (triple action solar water storage tanks). As far as night-time temperature losses
are concerned, these are limited as much as possible by the solar system’s powerful thermal insulation. They are
nevertheless affected by ambient temperatures, which vary depending on the location and the weather.
5
CLASSIC
Nobel Xilinakis D. & Co preserves the right to change all specications of the products and their accessories without prior notice
SOLAR WATER HEATERS
RELIABILITY - HARMONY - AESTHETICS
NOBEL Solar Systems constitute an ecological
proposal and an effective energy solution, combining high
output, autonomy, aesthetics, facility in the installation
and money saving. They are made of excellent materials
according to international specications and have all the
certications and tests that conrm their quality.
They are highly aesthetic systems, which can be
simply and quickly installed to blend with the traditional or
modern architecture of a building and to provide free hot
water almost the whole year round. Even in regions with
low sunlight they achieve the preheating of the water,
which contributes to a drastically reduced consumption
of conventional energy.
With the use of solar systems, thermosiphonic or forced circulation, is achieved energy saving of 70-100%. At the
same time the operation time of the water tank or electric resistance is decreased, depending on the sunlight of each
region and the system’s size, with simultaneous reduction of emission of carbon dioxide.
LABELING
NOBEL solar water heaters are identied by two labels, one of them on the tank and the other on the collector. On
these one can nd all the details of the system. The information provided is important for the future identication of
the system.
Dimensions [mm]
Length: XXXXX
Width: XXXXX
Height: XXXXX
Overall area m
2
: XXXXX
Absorber area m
2
: XXXXX
Overall collector weight [kg]: XXXXX
Volume of heat transfer uid [lt]: XXXXX
Absorber coating: High selective vacum coating
Standstill temperature: XXXXX °C
Max. operating pressure: XXXXX MPa (XXXXX bar)
Transparent cover: Tempered, low-iron solar glass
Heat transfer medium: Polypropylene glycol / water mixture
Solar Collector
APOLLON AL 2000
S/N:
DATE:
???
??/????
MADE IN EU
5209999000861
· Absorber area: XXX m
2
· Aperture area: XXX m
2
· Nominal capacity: XXX It
· Design pressure: XXX KPa
· Heat transfer medium:
Propylene glycol / water mixture
· Permissible operating pressure
of the collector heat transfer medium:
XXX KPa
· Electrical Power: XXX W
· Storage Tank S/N: ??????
· Date of manufacture: ?????
Solar Water Heater
160ltt/2m
2
MADE IN EU
XILINAKIS D & CO.
5209999000861
6
Nobel Xilinakis D. & Co preserves the right to change all specications of the products and their accessories without prior notice
SOLAR WATER HEATERS FITTINGS & ACCESSORIES
1 COLLECTOR 2 COLLECTORS
Quantity Description Quantity Description
2 PCS ELBOW Ø22 COPPER X DN16 INOX 2 TEM.
T-PIECE Ø22 COPPER X DN16 INOX
X Ø22 COPPER
1 PC FEMALE CONNECTOR 3/4 X DN16 2 PCS FEMALE CONNECTOR 3/4 X DN16
1 PC
ELBOW FEMALE CONNECTOR
3/4 X DN16
1 PC ONE WAY SAFETY VALVE 10 bar
2 PCS END CAP Ø22 1 PC CLOSED LOOP SAFETY VALVE 3.5 bar
1 PC ONE WAY SAFETY VALVE 10 bar 2 PCS INOX TUBE DN16
1 PC CLOSED LOOP SAFETY VALVE 3.5 bar 1 PC INSULATION ARMAFLEX Ø22
2 PCS INOX TUBE DN16 3-5 PCS. ANTI-FREEZE LIQUID 1lt
1 PC INSULATION ARMAFLEX Ø22
2 PCS ANTI-FREEZE LIQUID 1lt
Each model packaging contains all the necessary equipment:
1. The water storage tank
2. The collector (s)
3. The support base system & ttings and accessories
The water storage tank is placed between two round styrofoam covers, which are tightened on the storage tank with
stretch lm. The collector is packed in a carton box. All the parts of the support base system, with the connection
ttings, the antifreeze liquid and the other accessories are packed in a carton box. The ttings and the accessories
of each appliance appears in the following table:
PACKAGING
PRODUCT RANGE
APOLLON series thermosiphon systems
are available in the following models:
1
3
2
4
1. Boiler
2. Collector(s)
3. Support base, ttings
& Accessories
4. Palette
MODEL
NOBEL 120/2
NOBEL 160/2
NOBEL 160/2.6
NOBEL 160/3
NOBEL 200/2.6
NOBEL 200/3
NOBEL 200/4
NOBEL 320/4
DESCRIPTION
120lt tank, 2m
2
collector
160lt tank, 2m2 collector
160lt tank, 2.6m2 collector
160lt tank, 2 x 1.5m2 collector
200lt tank, 2.6m2 collector
200lt tank, 2 x 1.5m2 collector
200lt tank, 2 x 2m2 collector
320lt tank, 2 x 2m2 collector
7
CLASSIC
Nobel Xilinakis D. & Co preserves the right to change all specications of the products and their accessories without prior notice
WATER STORAGE TANK SPECIFICATIONS
STEEL - ENAMEL
1. Water tank: 2.5mm thickness cold rolled steel with a double internal layer of enamel, red at 860°C according to
DIN 4753. The enameling is done in our own high tech industrial facilities. The water storage tanks are checked
individually upon exit from the enameling unit, assuring the top quality of the enamel.
2. Surrounding heat exchanger (Jacket) with internal expansion tank of cold rolled steel, for the operation of the
closed loop, which is compulsory at low temperatures and also in areas with water with high mineral content.
3. Thermal insulation: the ecological, expanded polyurethane of high-density (>50kg/m
3
) ensures minimum heat
loss, maintaining the hot water temperature.
4. External housing: naval aluminium alloy.
5. Cathode protection by magnesium anode
Ø26x500mm/500gr for effective protection
against corrosion and mineral deposits caused
by electrolytic reactions.
6. Large round galvanized steel ange
rubber protected: innovative, smart design
for the quick cleaning of minerals, fast
replacement of anode and immediate access
to the electrical components.
7. Complete sealing rubber of silicone, non
toxic material, which does not permit water to
contact the ange, thus protecting it against
electrolysis and corrosion, specially made to
withstand the generally accepted specications
with regard to the heat resistance.
8. Heating element rated according to the country of destination local regulations. (Optional, for the use of electricity
as an auxiliary power source). All electrical components carry the CE marking according to EN 60335-1 and
EN60335-2-21 standards.
9. Overheating protection with closed loop connection through a stainless steel exible hose.
10. Automatic regulated thermostat with bipolar protection and auxiliary fuse. All electrical components carry the
CE marking according to EN 60335-1 and EN60335-2-21 standards.
11. Protective cover: designed to ensure the proper ventilation of the electrical section and its protection from the
environmental conditions.
Gland: for sealing the passage of the heating element’s connection cable.
12. Cold water inlet: 1/2” BSP male threaded pipe end for water stratication and 10 bar safety valve for releasing
pressure.
13. Hot water outlet: 1/2” BSP male threaded pipe end.
14. Jacket inlet: 3/4” BSP male threaded pipe end.
15. Jacket outlet: 3/4” BSP male threaded pipe end.
16. 3.5 bar safety valve connection location: brass 1/2” BSP male threaded pipe end.
17. Closed loop circuit lling point: brass 1/2” BSP male threaded pipe end.
18. Heat exchanger with 3/4” BSP female threaded pipe ends, made of stainless steel house, large exchange
surface (160lt & 200lt: 0.38m
2
, 320lt: 0.76m2) for use of the heating produced by central heating systems during
the winter (optional)
8
Nobel Xilinakis D. & Co preserves the right to change all specications of the products and their accessories without prior notice
COLLECTOR APOLLON AL SPECIFICATIONS
1. External one piece aluminium trough of high aesthetics, shaped by deep drawing method in 400 tn capacity
press, made of naval aluminium alloy, rich in magnesium. Robust construction for perfect tightness.
2. High density, eco-friendly thermal insulation achieved with a 60mm thick layer of prepressed rockwool with a
covering of black glass fabric for the minimization of thermal losses.
Rockwool insulation thermal conductivity: λ=0.035 W/m grd (DIN 56612, measured at 0°C)
3. Water frame of copper pipes of suitable gauge and thickness (headers: Ø22, manifolds: Ø8) Headers are
punched with upper expansion, for perfect manifolds tting, thus avoiding pressure drop in the collectors.
(tube pitch) = 93mm (EN 1652).
4. Sun-Selective complete area absorber made of selective aluminium sheet with a special titan coating formed
in vacuum,of high absorbency and low radiation, covers the complete window area as well as the headers, thus
increasing the collector’s absorbency, Laser Welded to the water frame.
5. Special plastic parts for supporting and sealing the water frame to the trough, specially designed for the
collector’s ventilation, with sensor supporting option.
Special silicone rubber seals allow uctuation of the absorber’s length (contraction - expansion) in a -40°C
to +200°C temperature range.
6. Tempered solar glass low iron, with a stable coefcient of expansion and high light transmittance, can withstand
adverse weather conditions (e.g. hail storm, extreme temperature changes, etc.).
7. Solar glass rubber seal: UV proofed
8. Alluminium prole electrostatically painted (Al Mg Si 05): for solar glass seating and supporting.
Solar Keymark
Certied
E 22
9
CLASSIC
Nobel Xilinakis D. & Co preserves the right to change all specications of the products and their accessories without prior notice
YEARLY ENERGY OUTPUT (kWh/m2)
ATHENS - GREECE 614
DAVOS - SWITZERLAND 795
WÜRZBURG - GERMANY 571
STOCKHOLM - SWEDEN 535
Normal absorber design with louvers.
Air turbulence increases heat loss
Complete area technology
The uniform area prevents heat loss
FLAT SURFACE INCLINED SURFACE
One type of supporting base
system, electrostatically painted,
made of 2.5mm thick galvanised
steel, with stainless steel screws
and nuts for installation on at
or inclined surfaces
SUPPORT BASE
10
Nobel Xilinakis D. & Co preserves the right to change all specications of the products and their accessories without prior notice
WATER STORAGE TANK 120lt
DIMENSIONS (mm) 560x1095
WEIGHT EMPTY (kg) 49
JACKET CAPACITY (lt) 8.6
JACKET SURFACE (m
2
) 0.6
MAX. TEST PRESSURE (bar) 15
MAX. OPERATING PRESSURE (bar) 10
COLLECTOR APOLLON AL 2000
TOTAL AREA (m
2
)
2.03
NUMBER OF MANIFOLDS
10
HEAT TRANSFER MEDIUM PROPYLENE GLYCOL SOLUTION
CAPACITY (lt)
1.75
ABSORBER SURFACE (m2)
1.8
TOTAL DIMENSIONS (mm)
2010x1010x110
COLLECTOR TOTAL WEIGHT (without liquid) (kg)
38
ABSORBER SUN - SELECTIVE ALUMINIUM
ABSORBENCY / RADIATION COEFFICIENT
95% +/-2% / 5% +/-2%
TOTAL SYSTEM 120lt/2m
2
NUMBER OF COLLECTORS 1
SYSTEM WEIGHT EMPTY (Packed) / FULL (kg) 108 / 227
MAX. WATER TANK OPERATING PRESSURE (bar) 10
MAXIMUM PRESSURE CLOSED CIRCUIT (bar) 3.5
Note: All dimensions measured in mm
SOLAR WATER HEATER 120lt/2m2
120lt/2m2
FLAT SURFACE
120lt/2m2
INCLINED SURFACE
ITEM PART ΝΑΜΕ DIMΕΝSIONS QTY.
1 Beam Π 100x2x1800mm 2
2 Beam Π 90x2x2550mm 2
3 Beam Π 80x2x500mm 2
4 Collector Support 870mm 2
5 Beam (Lam. section 33x2mm) 1400mm 2
6 Screw Rod M8x1770mm 2
7 Hexagon Head Bolt M8 M8x20 13
8 Hexagon Head Bolt M8 M8x25 4
9 Hex Nut M8 25
10 Hexagon Head Bolt M6 M6x50 4
11 Hex Nut M6 4
12 Washer Ø8 12
13 Washer Ø10 4
14 Screw 8x60 4
15 Upat D10 4
ITEM PART ΝΑΜΕ DIMΕΝSIONS QTY.
1 Beam Π 90x2x2500mm 2
2 Beam Π 80x2x2690mm 2
3 Beam Π 90x2x135mm 2
4 Collector Support 870mm 2
5 Beam Π 125x1252mm 2
6 Angle Adjuster 2
7 Screw Rod Μ20xØ9 4
8 Hexagon Head Bolt M8 M8x20 20
9 Hexagon Head Bolt M8 M8x25 4
10 Hexagon Head Bolt M8 M8x60 4
11 Hexagon Head Bolt M6 M6x50 2
12 Hex Nut M20 8
13 Hex Nut M8 26
14 Hex Nut M6 2
15 Washer Ø20 8
16 Washer Ø10 4
17 Washer Ø8 12
18 Rivet with Thread M8 FAR 2
1
2
4
5
3
6
7
8
10
2
1
5
4
6
3
9
10
11
8
1252
684
2601
2853
820
1128
1996
2084
2130
11
CLASSIC
Nobel Xilinakis D. & Co preserves the right to change all specications of the products and their accessories without prior notice
WATER STORAGE TANK 160lt
DIMENSIONS (mm) 560x1325
WEIGHT EMPTY (kg) 60
JACKET CAPACITY (lt) 12.9
JACKET SURFACE (m
2
) 0.9
MAX. TEST PRESSURE (bar) 15
MAX. OPERATING PRESSURE (bar) 10
COLLECTOR APOLLON AL 2000
TOTAL AREA (m
2
)
2.03
NUMBER OF MANIFOLDS
10
HEAT TRANSFER MEDIUM PROPYLENE GLYCOL SOLUTION
CAPACITY (lt)
1.75
ABSORBER SURFACE (m2)
1.8
TOTAL DIMENSIONS (mm)
2010x1010x110
COLLECTOR TOTAL WEIGHT (without liquid) (kg)
38
ABSORBER SUN - SELECTIVE ALUMINIUM
ABSORBENCY / RADIATION COEFFICIENT
95% +/-2% / 5% +/-2%
TOTAL SYSTEM 160lt/2m
2
NUMBER OF COLLECTORS 1
SYSTEM WEIGHT EMPTY (Packed) / FULL (kg) 122 / 278
MAX. WATER TANK OPERATING PRESSURE (bar) 10
MAXIMUM PRESSURE CLOSED CIRCUIT (bar) 3.5
Note: All dimensions measured in mm
SOLAR WATER HEATER 160lt/2m2
160lt/2m2
FLAT SURFACE
160lt/2m2
INCLINED SURFACE
ITEM PART ΝΑΜΕ DIMΕΝSIONS QTY.
1 Beam Π 100x2x1800mm 2
2 Beam Π 90x2x2550mm 2
3 Beam Π 80x2x500mm 2
4 Beam Π 80x2x1465mm 2
5 Collector Support 870mm 2
6 Beam (Lam. section 33x2mm) 1400mm 2
7 Screw Rod M8x1770mm 2
8 Hexagon Head Bolt M8 M8x20 13
9 Hexagon Head Bolt M8 M8x25 4
10 Hex Nut M8 25
11 Hexagon Head Bolt M6 M6x50 6
12 Hex Nut M6 6
13 Washer Ø8 12
14 Washer Ø10 4
15 Screw 8x60 4
16 Upat D10 4
ITEM PART ΝΑΜΕ DIMΕΝSIONS QTY.
1 Beam Π 90x2x2500mm 2
2 Beam Π 80x2x2690mm 2
3 Beam Π 90x2x135mm 2
4 Collector Support 870mm 2
5 Beam Π 125x1252mm 2
6 Angle Adjuster 2
7 Screw Rod Μ20xØ9 4
8 Hexagon Head Bolt M8 M8x20 20
9 Hexagon Head Bolt M8 M8x25 4
10 Hexagon Head Bolt M8 M8x60 4
11 Hexagon Head Bolt M6 M6x50 2
12 Hex Nut M20 8
13 Hex Nut M8 26
14 Hex Nut M6 2
15 Washer Ø20 8
16 Washer Ø10 4
17 Washer Ø8 12
18 Rivet with Thread M8 FAR 2
2
1
5
4
6
3
9
10
11
8
1
2
5
6
4
3
7
8
11
9
1252
1325
684
2601
2853
820
1325
1996
2084
2130
12
Nobel Xilinakis D. & Co preserves the right to change all specications of the products and their accessories without prior notice
WATER STORAGE TANK 160lt
DIMENSIONS (mm) 560x1325
WEIGHT EMPTY (kg) 60
JACKET CAPACITY (lt) 12.9
JACKET SURFACE (m
2
) 0.9
MAX. TEST PRESSURE (bar) 15
MAX. OPERATING PRESSURE (bar) 10
COLLECTOR APOLLON AL 2600
TOTAL AREA (m
2
)
2.53
NUMBER OF MANIFOLDS
13
HEAT TRANSFER MEDIUM PROPYLENE GLYCOL SOLUTION
CAPACITY (lt)
2.12
ABSORBER SURFACE (m2)
2.3
TOTAL DIMENSIONS (mm)
2010x1260x110
COLLECTOR TOTAL WEIGHT (without liquid) (kg)
45.4
ABSORBER SUN - SELECTIVE ALUMINIUM
ABSORBENCY / RADIATION COEFFICIENT
95% +/-2% / 5% +/-2%
TOTAL SYSTEM 160lt/2.6m
2
NUMBER OF COLLECTORS 1
SYSTEM WEIGHT EMPTY (Packed) / FULL (kg) 132 / 288
MAX. WATER TANK OPERATING PRESSURE (bar) 10
MAXIMUM PRESSURE CLOSED CIRCUIT (bar) 3.5
Note: All dimensions measured in mm
SOLAR WATER HEATER 160lt/2.6m2
160lt/2.6m2
FLAT SURFACE
160lt/2.6m2
INCLINED SURFACE
ITEM PART ΝΑΜΕ DIMΕΝSIONS QTY.
1 Beam Π 100x2x1800mm 2
2 Beam Π 90x2x2550mm 2
3 Beam Π 80x2x500mm 2
4 Beam Π 80x2x1465mm 2
5 Collector Support 1100mm 2
6 Beam (Lam. section 33x2mm) 1400mm 2
7 Screw Rod M8x1770mm 2
8 Hexagon Head Bolt M8 M8x20 13
9 Hexagon Head Bolt M8 M8x25 4
10 Hex Nut M8 25
11 Hexagon Head Bolt M6 M6x50 6
12 Hex Nut M6 6
13 Washer Ø8 12
14 Washer Ø10 4
15 Screw 8x60 4
16 Upat D10 4
ITEM PART ΝΑΜΕ DIMΕΝSIONS QTY.
1 Beam Π 90x2x2500mm 2
2 Beam Π 90x2x135mm 2
3 Beam Π 80x2x2690mm 2
4 Collector Support 1100mm 2
5 Beam Π 125x1252mm 2
6 Angle Adjuster 2
7 Screw Rod Μ20xØ9 4
8 Hexagon Head Bolt M8 M8x20 20
9 Hexagon Head Bolt M8 M8x25 4
10 Hexagon Head Bolt M8 M8x60 4
11 Hexagon Head Bolt M6 M6x50 2
12 Hex Nut M20 8
13 Hex Nut M8 26
14 Hex Nut M6 2
15 Washer Ø20 8
16 Washer Ø10 4
17 Washer Ø8 12
18 Rivet with Thread M8 FAR 2
1
2
5
6
4
3
7
8
11
9
3
1
5
4
6
2
9
8
10
11
1252
1401
684
2601
2853
1050
1401
1996
2084
2130
13
CLASSIC
Nobel Xilinakis D. & Co preserves the right to change all specications of the products and their accessories without prior notice
WATER STORAGE TANK 160lt
DIMENSIONS (mm) 560x1325
WEIGHT EMPTY (kg) 60
JACKET CAPACITY (lt) 12.9
JACKET SURFACE (m
2
) 0.9
MAX. TEST PRESSURE (bar) 15
MAX. OPERATING PRESSURE (bar) 10
COLLECTOR APOLLON AL 1500
TOTAL AREA (m
2
)
1.52
NUMBER OF MANIFOLDS
10
HEAT TRANSFER MEDIUM PROPYLENE GLYCOL SOLUTION
CAPACITY (lt)
1.45
ABSORBER SURFACE (m2)
1.3
TOTAL DIMENSIONS (mm)
1510x1010x110
COLLECTOR TOTAL WEIGHT (without liquid) (kg)
28
ABSORBER SUN - SELECTIVE ALUMINIUM
ABSORBENCY / RADIATION COEFFICIENT
95% +/-2% / 5% +/-2%
TOTAL SYSTEM 160lt/3m
2
NUMBER OF COLLECTORS 2
SYSTEM WEIGHT EMPTY (Packed) / FULL (kg) 138 / 293
MAX. WATER TANK OPERATING PRESSURE (bar) 10
MAXIMUM PRESSURE CLOSED CIRCUIT (bar) 3.5
SOLAR WATER HEATER 160lt/3m2
160lt/3m2
FLAT SURFACE
160lt/3m2
INCLINED SURFACE
ITEM PART ΝΑΜΕ DIMΕΝSIONS QTY.
1 Beam Π 90x2x2000mm 2
2 Beam Π 80x2x2170mm 2
3 Collector Support 1600mm 2
4 Beam Π 125x1252mm 2
5 Angle Adjuster 2
6 Screw Rod Μ20xØ9 4
7 Hexagon Head Bolt M8 M8X20 20
8 Hexagon Head Bolt M8 M8x25 4
9 Hexagon Head Bolt M8 M8x60 4
10 Hexagon Head Bolt M6 M6x50 2
11 Hex Nut M20 8
12 Hex Nut M8 22
13 Hex Nut M6 2
14 Washer Ø20 8
15 Washer Ø10 4
16 Washer Ø8 16
17 Rivet with Thread M8 FAR 2
ITEM PART ΝΑΜΕ DIMΕΝSIONS QTY.
1 Beam Π 100x2x1600mm 2
2 Beam Π 90x2x2050mm 2
3 Beam Π 80x2x500mm 2
4 Collector Support 1600mm 2
5 Beam (Lam. section 33x2mm) 1400mm 2
6 Screw Rod M8x1290mm 2
7 Hexagon Head Bolt M8 M8x20 17
8 Hexagon Head Bolt M8 M8x25 4
9 Hex Nut M8 25
10 Hexagon Head Bolt M6 M6x50 4
11 Hex Nut M6 4
12 Washer Ø8 16
13 Washer Ø10 4
14 Screw 8x60 4
15 Upat D10 4
1
2
4
5
6
7
8
3
10
2
1
4
3
5
8
7
9
10
2154
1252
685
2087
2334
1050
2154
6281
1533
1599
14
Nobel Xilinakis D. & Co preserves the right to change all specications of the products and their accessories without prior notice
WATER STORAGE TANK 200lt
DIMENSIONS (mm) 560x1475
WEIGHT EMPTY (kg) 72
JACKET CAPACITY (lt) 18.3
JACKET SURFACE (m
2
) 1.3
MAX. TEST PRESSURE (bar) 15
MAX. OPERATING PRESSURE (bar) 10
COLLECTOR APOLLON AL 2600
TOTAL AREA (m
2
)
2.53
NUMBER OF MANIFOLDS
13
HEAT TRANSFER MEDIUM PROPYLENE GLYCOL SOLUTION
CAPACITY (lt)
2.12
ABSORBER SURFACE (m2)
2.3
TOTAL DIMENSIONS (mm)
2010x1260x110
COLLECTOR TOTAL WEIGHT (without liquid) (kg)
45.4
ABSORBER SUN - SELECTIVE ALUMINIUM
ABSORBENCY / RADIATION COEFFICIENT
95% +/-2% / 5% +/-2%
TOTAL SYSTEM 200lt/2.6m
2
NUMBER OF COLLECTORS 1
SYSTEM WEIGHT EMPTY (Packed) / FULL (kg) 145 / 346
MAX. WATER TANK OPERATING PRESSURE (bar) 10
MAXIMUM PRESSURE CLOSED CIRCUIT (bar) 3.5
Note: All dimensions measured in mm
SOLAR WATER HEATER 200lt/2.6m2
200lt/2.6m2
FLAT SURFACE
200lt/2.6m2
INCLINED SURFACE
ITEM PART ΝΑΜΕ DIMΕΝSIONS QTY.
1 Beam Π 100x2x1800mm 2
2 Beam Π 90x2x2550mm 2
3 Beam Π 80x2x500mm 2
4 Beam Π 80x2x1465mm 2
5 Collector Support 1100mm 2
6 Beam (Lam. section 33x2mm) 1400mm 2
7 Screw Rod M8x1770mm 2
8 Hexagon Head Bolt M8 M8x20 13
9 Hexagon Head Bolt M8 M8x25 4
10 Hex Nut M8 25
11 Hexagon Head Bolt M6 M6x50 6
12 Hex Nut M6 6
13 Washer Ø8 12
14 Washer Ø10 4
15 Screw 8x60 4
16 Upat D10 4
ITEM PART ΝΑΜΕ DIMΕΝSIONS QTY.
1 Beam Π 90x2x2500mm 2
2 Beam Π 90x2x135mm 2
3 Beam Π 80x2x2690mm 2
4 Collector Support 1100mm 2
5 Beam Π 125x1252mm 2
6 Angle Adjuster 2
7 Screw Rod Μ20xØ9 4
8 Hexagon Head Bolt M8 M8x20 20
9 Hexagon Head Bolt M8 M8x25 4
10 Hexagon Head Bolt M8 M8x60 4
11 Hexagon Head Bolt M6 M6x50 2
12 Hex Nut M20 8
13 Hex Nut M8 26
14 Hex Nut M6 2
15 Washer Ø20 8
16 Washer Ø10 4
17 Washer Ø8 12
18 Rivet with Thread M8 FAR 2
1
2
5
6
4
3
7
8
11
9
3
1
5
4
6
2
9
8
10
11
1252
1475
684
2601
2853
1050
1475
1996
2084
2130
Loading...