Page 1
NM Engineering ∞ 3300 Corte Malpaso, Camarillo, CA 93012 ∞ 805.388.7171 ∞ 805.388.0030 FAX
engineer@nm-eng.com ∞ www.nm-eng.com!
!
!
!
PARTS INCLUDED: TOOLS REQUIRED:
[1] Carbon Fiber Rear Spoiler Extension [1] Cleaning Solvent or Degreaser [1] Soft Towel
1. Using a soft towel, clean factory rear spoiler with paint
cleaning solvent or degreaser.
2. Test fit NM Rear Spoiler Extension to vehicle before
removing double-sided tape backing. Note: Front lip
hooks onto factory spoiler first.
3. When ready to install, pull off tape backing.
4. Center NM Spoiler Extension to factory spoiler,
then hook-on front lip. Note: Do not let tape
touch factory spoiler while doing this step.
5. Now push down rear section until snaps in place.
6. Then push down outside ends.
©2012 NM Engineering, a division of Automotive Performance Systems, Inc.
All rights reserved. Reproduction in whole or in part is prohibited.
DOC. NM.958857 Rev. 05.28.12
CARBON FIBER REAR SPOILER EXTENSION – NM.958857
[R56] MINI Cooper Hardtop ALL & JCW 2007-12
Loading...