Nix X12C User Manual

1
Contents
Getting Started............................................................................................................................ 2
Diagrams and Specifications........................................................................................................ 9
Remote Control.......................................................................................................................... 11
Notes Of Importance................................................................................................................... 12
Safety & Compliance................................................................................................................... 12
Cleaning Your Digital Photo Frame....................................................................................…....... 13
Frequently Asked Questions and Troubleshooting...................................................................... 13
2
Getting Started
1) To set up your Digital Photo Frame, you need to screw the stand into the slot near the rear right corner on the back.
Note: This frame and its stand are designed so that the frame sits horizontally on a flat surface. Please do NOT attempt to stand the frame up in the vertical/portrait position. If you wish to have the frame in a vertical/portrait position, you can consider wall-mounting it in this position, using the VESA Mounting Holes on the back of the frame.
2) Insert the power lead into the Digital Photo Frame’s socket marked DC
3) Turn on the Digital Photo Frame by switching the POWER button to the ON position
Main Menu:
After turning on the unit, this screen will appear:
If you have memory devices inserted into the frame (ie SD/SDHC or USB Flash Drive), they will appear as an extra icon in this Menu. For Example:
Use the [◀][▶] buttons to navigate, then press ENTER to select an option.
3
Viewing Your Photos
This Digital Photo Frame allows you to view JPEG Photo files only.
After selecting the memory device you want to view your photos from, you will see
several options displayed in the diagram below. Select ‘Picture’ to view your photos by pressing ENTER. You will now have access to your photos in thumbnail view. You can navigate through your photos using the [◀][▶][▲][▼] buttons. Press ENTER to start playing your photos.
Note: If there are no photos on your memory device, you will not continue to the next screen.
During a slideshow, you can press the MENU button and an info bar will appear on the screen. This allows you to skip back and forth through the slideshow, rotate a photo, stop the slideshow or zoom in on a photo. Press [◀][▶] and ENTER to make a selection.
Note: To remove the info bar from the screen, just press ‘MENU’ again.
4
Viewing Your Photos from a Folder
If you have photos in a specific folder that you want to view separately, go to ‘Edit’ in the Menu and press ENTER:
You should see a list of individual files and folders on the device. Locate the folder you wish to open, so it is highlighted yellow. Then press ENTER. Now press ENTER again to start viewing photos from just this folder.
Viewing Your Videos
This Digital Photo Frame allows you to view MPEG-4/AVI Video files only. It is not “HD Ready”.
If you encounter problems with video playback, please refer to our website FAQ section where there are links to Video Conversion programs.
Select the Movie icon from the Menu, then press ENTER. Your Video files will list on the
screen.
Press [▲][▼] to choose the video you want to view and press ENTER to play.
During the video, you can press the MENU button and an info bar will appear on the
screen. This allows you to fast forward or rewind, skip back and forth through the video collection, stop the video or zoom in on the screen.
Press [◀][▶] and ENTER to make a selection.
Note: If there are no videos on your memory device, you will not continue to the next screen.
Loading...
+ 14 hidden pages