Nitek RK170 User Manual

Model RK170

Media Converter Rack

Installation and

Operation Manual

Specifications

Size 1.7”H x 19”W x 5.75”D
(mm) (45H x 19”W x 146D)

Power Requirements 15 VDC @ 1 Amp
Class 2 Only

Note: This installation should be made by a
qualified service person and conform with local
codes.

Reduce risk of fire or electrical shock. Do not
expose this product to rain or moisture.

!

Installation

The RK170 provides mounting and power for the Media Converter units. Media Converter units should be inserted
from left to right into the unit. Units are designed to fit tightly next to the adjacent unit (see pictures).

STEP 1

Align unit to left side and front
edge of RK170.

STEP 2

Slide unit backwards to mate it with
the power connector.

STEP 3

Align multiple units
side by side.

USA Office:
5410 Newport Drive, Rolling Meadows, IL 60008
Phone: [phone]
Fax: [phone]
E-mail: [e-mail]
WWW.NITEK.NET

680250101

STEP 4

Connect power supply on
rear of RK170.

NITEK®

15VDC
1Amp

Class 2 only

MADE IN U.S.A.

Europe Office:
De Schans 19-21 2a, 8231 KA Lelystad
The Netherlands
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
WWW.NITEK.NL

NITEK

WWW.NITEK.NET

Model RK170

540440111

R

Rev 021511