Nitek FTS324104S00 User Manual
Installation Manual
FTS324104S00 Dual Transmitter
2 Camera Transmitter w/Data and Aux Comm.
Note: This installation should be made by a qualified
service person and conform with local codes.
Reduce risk of fire or electrical shock do
not expose this product to rain or moisture.
!
Specifications
Video Connection
Connector 75 ohm BNC Socket
Input Impedance 75 ohm terminated
Input Level 1 volt p-p nominal
Frequency Response 10Hz to 5.75MHz
Optical Connection
Connector SC Style
Path Loss 20 dB
Wavelength 1310 / 1550nm
Power Connection
Supply 12 to 24 AC/DC @ 300mA
Auxiliary Ports
Data Selectable RS422/RS485/RS232
Alarm In Contact Closure
Alarm Out 100V / 150mA max.
CH1
C
H2
VIDEO CH1
VIDEO CH2
1
2
3
4
DATA / ALARM CH1
5
6
7
8
1
2
3
4
DATA / ALARM CH2
5
6
7
8
POWER
12-24 VDC,
+
300mA, Class 2
NITEK ®
5410 Newport Drive, Suite 24
Rolling Meadows, IL 60008
PHONE (847) 259-8900
FAX (847) 259-1300
WWW.NITEK.NET
680600117 Rev 02102009
POWER
VIDEO / OPTO
DATA OUT
NITEK
Fiber Optic Video Transmission Systems
WWW.NITEK.NET
800-528-4343
CLASS 1
R
DATA CH1
DATA CH2
DATA SWITCHES INSIDE UNIT
ALARM
OUT +
OUT
GND
DATA SWITCH SETTINGS
DATA
IN + (A)
OUT + (A)
OUT
DATA IN
ALARM OUT
ALARM IN
CH1
RS485
RS422
RS232
RS485
RS422
RS232
OPTO IN / OUT
PIN
3
4
5
IN +
6
RS232
RS485
RS422
OPTO IN / OUT
1
2
7
2
-
8
IN - (B)
7
8
7
8
-
8
(B)
-
6
6
6
GND
CH2
CH1
CH2
Installation Instructions
- The fiber transmitter is designed to be mounted using the included bracket.
- Always allow for bend radius of optical and electrical cables when installed.
Power/Video/Opto LED
Color Description
Green System Normal
Yellow (RX) Link working, No video at TX
Red (TX) Power on, No video into TX
(RX) Power on, No opto into RX
Data LED
Color Description
Green Data is Low / Logic 0
Red Data is High / Logic 1 (RS422/485)
Off Data is Tri-state / (High - RS232)
Rear Panel Data Connections
Data RS485 RS422 RS232
IN + (A) 7 1 2
IN - (B) 8 2 --
OUT +
(A)
OUT - (B) 8 8 -GND 6 6 6
Set Data Format with Internal Switch
Data
7 7 8
RS485
RS422
RS232
Alarm Connections
Alarm Pin
OUT + 3
OUT - 4
IN + 5
GND 6
Service Information
There are no user serviceable parts inside the unit. In the event that service is required to this unit please
contact NITEK Technical Support at 800-528-4343.
Typical Installation - FTS324104S00
VIDEO IN
1
2
3
4
DATA / ALARM CH1
5
6
7
8
1
2
3
4
DATA / ALARM CH2
5
6
7
8
Data Connections
AUX COMM IN / OUT
DEPENDING ON SWITCH
SETTING
VIDEO CH1
DATA OUT
VIDEO CH2
1
2
3
4
DATA / ALARM CH1
5
6
7
8
1
2
3
4
DATA / ALARM CH2
5
6
7
8
POWER
12-24 VDC,
+
300mA, Class 2
NITEK
Fiber Optic Video Transmission Systems
WWW.NITEK.NET
800-528-4343
CLASS 1
R
Rear Panel Data Connections
Data RS485 RS422 RS232
IN + (A) 7 1 2
IN - (B) 8 2 --
OUT + (A) 7 7 8
OUT - (B) 8 8 --
GND 6 6 6
Set Data Format with Internal Switch
Data CH1
RS485
DATA CH1
RS422
RS232
RS485
DATA CH2
RS422
RS232
DATA SWITCHES INSIDE UNIT
PIN
ALARM
3
OUT +
4
OUT
5
IN +
6
GND
DATA SWITCH SETTINGS
DATA
RS485
7
IN + (A)
8
IN - (B)
7
OUT + (A)
8
OUT
(B)
-
6
GND
RS485
RS422
RS232
POWER
VIDEO / OPTO
DATA OUT
DATA IN
ALARM OUT
ALARM IN
CH1
CH2
CH1
OPTO IN / OUT
2
8
6
OPTO IN / OUT
CH2
RS232
RS422
1
2
7
8
6
Connect incoming
fiber using SC
connectors
Alarm Connections
Alarm Pin
OUT + 3
OUT - 4
IN + 5
GND 6
Power/Video/Opto LED
Color Description
Green System Normal
Yellow (RX) Link working, No video at TX
Red (TX) Power on, No video into TX
(RX) Power on, No opto into RX
Data LED
Color Description
Green Data is Low / Logic 0
Red Data is High / Logic 1 (RS422/485)
Off Data is Tri-state / (High - RS232)
Loading...