Nitek FTS311000S00 User Manual
Installation Manual
NITEK
OPTO OUT
VIDEO IN
12-24 AC\DC
150mA 50\60 Hz
Class 2 only
POWER
VIDEO / OPTO
FTS311000S00 Mini Transmitter
Single Camera Transmitter
Note: This installation should be made by a qualified
service person and conform with local codes.
Reduce risk of fire or electrical shock do
!
not expose this product to rain or moisture.
Specifications
Video Connection
Connector 75 ohm BNC Socket
Input Impedance 75 ohm terminated
Input Level 1 volt p-p nominal
Frequency Response 10Hz to 5.75MHz
Optical Connection
Connector SC Style
Path Loss 20 dB
No Customer adjustments are available within the unit.
Wavelength 1310 / 1550nm
Power Connection
Supply 12 to 24VDC @ 150mA
POWER
VIDEO / OPTO
OPTO OUT
VIDEO IN
NITEK
NITEK ®
5410 Newport Drive, Suite 24
Rolling Meadows, IL 60008
PHONE (847) 259-8900
FAX (847) 259-1300
WWW.NITEK.NET
680600114 Rev 02052009
12-24 AC\DC
150mA 50\60 Hz
Class 2 only
Installation Instructions
- The mini fiber transmitter is designed to be mounted using the included bracket.
- Always allow for bend radius of optical and electrical cables when installed.
- There are no adjustments required when using this product.
Power/Video/Opto LED
Color Description
Green System Normal
Yellow (RX) Link working, No video at TX
Red (TX) Power on, No video into TX
(RX) Power on, No opto into RX
Data LED
Color Description
Green Data is Low / Logic 0
Red Data is High / Logic 1 (RS422/485)
Off Data is Tri-state / (High - RS232)
Video Source
SC FIBER OUT
BNC Coax IN
POWER
SUPPLY
Service Information
There are no user serviceable parts inside the unit. In the event that service is required to this unit please
contact NITEK Technical Support at 800-528-4343.
Loading...