Nitek FRS322000S00, FRS311000S00, FRS344000S00 Installation Manual
Installation Manual
FRS311000S00 Single Receiver
FRS322000S00 Dual Receiver
FRS344000S00 Quad Receiver
1, 2 and 4 Camera Stand Alone Receiver
Note: This installation should be made by a qualified service
person and conform with local codes.
Reduce risk of fire or electrical shock do
not expose this product to rain or moisture.
!
Specifications
Video Connection
Connector 75 ohm BNC Socket
Output Impedance 75 ohm terminated
Output Level 1 volt p-p nominal
Frequency Response 10Hz to 5.75MHz
Optical Connection
Connector SC Style
Path Loss 20dB
No Customer adjustments are available within the unit.
Wavelength 1310 / 1550nm
Power Connection
Supply 12 to 24VDC @ 300mA
CH1
CH3 CH4
CH2
CH1
CH2
NITEK ®
5410 Newport Drive, Suite 24
Rolling Meadows, IL 60008
PHONE (847) 259-8900
FAX (847) 259-1300
WWW.NITEK.NET
680600120 Rev 02092009
VIDEO CH1
VIDEO CH3
VIDEO CH2
VIDEO CH4
POWER
12-18 VDC,
+
300mA, Class 2
NITEK
Fiber Optic Video Transmission Systems
WWW.NITEK.NET
800-528-4343
CLASS 1
FRS344000S00
VIDEO CH1
NITEK
Fiber Optic Video Transmission Systems
WWW.NITEK.NET
VIDEO CH2
800-528-4343
R
R
CH1
CH3
POWER
VIDEO / OPTO
OPTO IN / OUT
CH1
CH2
POWER
VIDEO / OPTO
OPTO IN / OUT
CH2
CH4
CH1
CH2
CH3
CH4
CH1
CH2
POWER
12-24 VDC,
+
Power/Video/Opto LED
CLASS 1
300mA, Class 2
FRS322000S00
Color Description
Green System Normal
Yellow (RX) Link working, No video at TX
CH1
CH2
VIDEO CH1
VIDEO CH2
NITEK
Fiber Optic Video Transmission Systems
WWW.NITEK.NET
800-528-4343
Red (TX) Power on, No video into TX
(RX) Power on, No opto into RX
POWER
12-24 VDC,
+
300mA, Class 2
CLASS 1
FRS311000S00
Installation Instructions
- The fiber receiver is designed to be mounted using the included bracket.
- Always allow for bend radius of optical and electrical cables when installed.
- There are no adjustments required when using this product.
CH1
CH2
R
POWER
VIDEO / OPTO
OPTO IN / OUT
CH1
CH2
Service Information
There are no user serviceable parts inside the unit. In the event that service is required to this unit please
contact NITEK Technical Support at 800-528-4343.
Video Out
Typical Installation - Stand Alone Receiver
VIDEO CH1
VIDEO CH3
VIDEO CH2
VIDEO CH4
POWER
12-18 VDC,
+
300mA, Class 2
POWER
SUPPLY
NITEK
Fiber Optic Video Transmission Systems
WWW.NITEK.NET
800-528-4343
CLASS 1
R
Color Description
Green System Normal
Yellow (RX) Link working, No video at TX
POWER
VIDEO / OPTO
CH2
CH4
CH1
CH3
SC FIBER IN
CH1
CH2
OPTO IN / OUT
CH3
CH4
Power/Video/Opto LED
Red (TX) Power on, No video into TX
(RX) Power on, No opto into RX
Loading...