Nitek EL4500U, ET4500U, ER1500U Installation And Operation Manual
Model EL4500U (for use with Network cable)
Installation and
Includes one ET4500U Transmitter
Operation Manual
and one ER1500U Receiver
Reduce risk of fire or e lect rical s hock . Do not
expose this product to rain or moisture.
Note: This installation should be made by a
qualified service person and conform with local
codes.
Introduction
The EL4500U system uses a four channel transmitter and a single channel receiver to extend Ethernet & PoE. The
EL4500U can be used on new or existing cable and is designed to greatly extend the distances to which IP cameras and
network devices can operate. In addition to network communication the EL4500U is ideal for PoE applications. It allows
all power to flow from the head end for most camera applications. In unique cases where high power PoE is needed it
can inject up to 25 watts of power at the transmitter end.
TYPE 1 Installation
Install EL4500U with a PoE Source Switch and IP Cameras
Refer to the diagram below when installing. A common hookup involves a length of network cable up to 2,000ft / 600m,
the EL4500U transmitter and receiver pairs (ET4500U & ER1500U), an IP camera or other peripheral network device
(both universally referred to as the Power Device or PD), and a 3rd party PoE network switch or Power Sourcing
Equipment/PSE.
To hook up the EL4500U begin by connecting the ER1500U to the Power Sourcing Equipment, usually a switch (RJ45to-RJ45) via a CAT5/CAT6 patch cable. Next connect the ER1500U “Link Port” to category cable running from the
ER1500U to the ET4500U. The IP cameras interface with the ET4500C via RJ45 and a CAT5/CAT6 patch cords. Power
for the IP Cameras is provides from the PS48 power supply connected to the ET4500U.
IP Camera
IP Camera
IP Camera
Patent Pending
IP
Por t 1
IP
Por t 2
IP
Por t 3
IP
Por t 4
Connec-
NITEK
ET4500U
Transmitter
RoHS
COMPLIANT
tor
Network
Port
Link
Port
48Vdc @ 1Amp
Power Supply
DC
Input
Link
Por t
600m
2000ft
Common Network Cable
LED INDICATORS
LED OFF ON FLASHING
PoE Out
Link Status
Power No Power
10/100 No Link 100Mb 10Mb
No PoE
Power Out
No Ethernet
Link
PoE Power
Good
Ethernet Link
Good
Power
Good
ER1500U
Link
NITEK
Por t
Receiver
RoHS
COMPLIANT
2002/95/EC
PoE
Switch
NITEK ®
5410 Newport Drive, # 24
Rolling Meadows, IL 60008
Phone: (847) 259-8900
Fax: (847) 259-1300
USA
E-mail: info@nitek.net
WWW.NITEK.NET
De Aar 99
8253 PN Dronten
The Netherlands
Tel: +31(0) 321 320 043
E-mail: info@nitekeurope.net
WWW.NITEK.NET
EUROPE
05122014
Loading...