Nitecore SRT 7 Revenger User Manual

User Manual

Features

· Purpose-designed for law enforcement, hunting and tactical

applications.

· The world’s first line of flashlights to feature third generation SSR

(smart selector ring) technology

· Smoothly and rapidly select brightness levels and function by rotating a

smart selector ring

· Utilizes the latest CREE XM-L (XM-L2 T6) LED for a maximum output of

up to 960 lumens

· Second generation of ‘Crystal Coating Technology’ along with ‘Precision

Digital Optics Technology’ provide extreme reflector performance

· Boasts a peak beam intensity of 23,256cd and a throw distance of up to

308 meters (ANSI FL1)

· High efficiency circuit board provides up to 200 hours runtime on lowest

output level

· Equipped with unique multi-colored (red, green and blue) tactical /

signaling lights

· Infinite brightness adjustment from 0 to 960 lumens

· Six rapidly switchable functions to select from

· Multi-functional power indicator light displays low battery status

· Patented spring-loaded impact absorption mechanism with reverse

polarity protection

· Stainless steel titanium-plated two-way clip

· Stainless steel retaining ring protects core components from damage

· Toughened ultra-clear mineral glass with anti-reflective coating

· Constructed from aero grade aluminum alloy

· Robust HAIII military grade hard-anodized

· Waterproof in accordance with IPX-8 (two meters submersible)

· Impact resistant to 1.5 meters

· Tail stand capability

Dimensions

Length: 158mm (6.22”)
Head diameter: 40 mm (1.57”)
Tube diameter: 25.4mm (1”)
Weight: 173g (6.1oz)(without battery)

Accessories

Quality holster, removable clip, tactical ring, lanyard, spare tail cap button
and spare O-ring

Battery Options

NOTE:

1. Ensure batteries are inserted with the positive (+) end pointing to the
head. The SRT7 will not operate with incorrectly inserted batteries.

2. Ensure when turning the SRT7 on, the beam is directed away from the
eyes of people or animals.

Switching ON/OFF

To switch ON: Press the button on the tailcap until a “click” is heard.
To switch OFF: Press the button on the tailcap a second time until a
“click” is heard.

Momentary Illumination

Momentary illumination can be achieved by switching the flashlight off
and then half pressing and holding the tail switch. Release switch to turn
the light off.

Adjusting Output

With the light turned on, slowly rotate the Smart Selector Ring (adjacent
to the bezel) in a counter-clockwise direction to cycle through the
following brightness levels: beacon -> police warning signal -> blue mode

-> green mode -> red mode -> standby mode -> infinite brightness modes

-> turbo mode -> strobe mode. These modes may be cycled through in

reverse by rotating the Smart Selector Ring in a clockwise direction.

Thanks for purchasing NITECORE!

®

ALL-ROUND Flashlight Expert

NOTICE

The above data has been measured in
accordance with the international
flashlight testing standards
ANSI/NEMA FL1 using one x 3.7V
2600mAh Nitecore 18650 battery and
2 x 3V 1550mAh Nitecore CR123
batteries under laboratory conditions.
The data may vary slightly during
real-world use due to battery type,
individual usage habits and
environmental factors.

*

Infinite brightness adjustment varies
from 0.1 to 960 lumens and is
manually adjusted by rotation of the
Smart Selector Ring. Subsequently,
runtimes will vary anywhere from 105
minutes to 200 hours depending on
chosen level of output.

Battery Installation

Insert one 18650 battery or two CR123 batteries with the positive pole
pointing forward (toward the light head).

TYPE

Nominal voltage

Compatible

Primary Lithium battery

CR123 3V

Y (Recommended)

18650 Rechargeable Li-ion battery

18650 3.7V

Y (Recommended)

Rechargeable Li-ion battery

RCR123 3.7V

Y

Output & Runtime

TURBO

LUMENS

960*

1h45

min

1h15

min

LOWER

LUMENS

0.1*

200

h

120

h

308m

(Beam Distance)

23256cd

(Peak Beam Intensity)

IPX-8, 2m

(Waterproof

AND Submersible)

1.5m

(Impact Resistant)

2×CR1231×18650

SYSMAX Industry Co., Ltd.

TEL: [phone]
FAX: [phone]
E-mail: [e-mail]
Web: www.nitecore.com
Address： Rm1401-03, Glorious Tower, 850 East Dongfeng Road,

Guangzhou, China 510600

Warranty Service

All NITECORE® products are warranted for quality. Any defective /
malfunctioning NITECORE® product can be repaired free of charge for a
period of 60 months (5 years) from the date of purchase. Beyond 60
months (5 years), a limited warranty applies, covering the cost of labor
and maintenance, but not the cost of accessories or replacement parts.
The warranty is nullified in all of the following situations:

1. The product(s) is/are broken down, reconstructed and/or modified by
unauthorized parties.

2. The product(s) is/are damaged through improper use.

3. The product(s) is/are damaged by leakage of batteries.

For the latest information on NITECORE® products and services, please
contact a local NITECORE® distributor or send an email to
[e-mail]

※All images, text and statements specified herein this user manual are
for reference purpose only. Should any discrepancy occurs between this
manual and information specified on www.nitecore.com, information on
our official website shall prevail.Sysmax Industry Co., Ltd. reserves the
rights to interpret and amend the content of this document at any time
without prior notice.

®

ALL-ROUND Flashlight Expert

Note: When using the SRT7 in infinite brightness mode, runtime will
increase when lower levels of output are selected. On its lowest setting,
the SRT7 will run continuously for up to 200 hours and on its highest
setting continuously for up to one hour and 45 minutes.

NB:

1. For user safety and to prevent overheating / failure, the SRT7 will
automatically switch to high mode after twenty minutes of use in Turbo
mode. Slowly rotate the Smart Selector Ring or press the tail switch
again to reactivate turbo mode when needed.

2. When the SRT7 is switched on standby mode, it will consume small
amounts of power to maintain the settings in the MCU (micro control
unit) but appear to be turned off. The power indicator on the light head
will blink once every two seconds to indicate the SRT7 is in standby
mode and to act as a locator.

Power Tips

1. With the light switched on, the power indicator will blink once every two

seconds when power levels reach 50%.

2. With the light switched on, the power indicator will blink rapidly when

power levels are low.

Changing Batteries

When the power indicator blinks rapidly it means the batteries need to be
replaced. Alternatively if the light becomes dim or unresponsive to
adjustment this also indicates batteries need to be replaced.

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a
thin coating of silicon-based lubricant.

Thanks for purchasing NITECORE!

Please find us on facebook: NITECORE Flashlights

20150821