The All-Round Flashlight Expert
®
MT06
User Manual
On/Off Operation
With the light turned off, press the switch until a click is heard to enter low output directly. Press the
switch again to turn the light off.
Features
·Features a CREE XQ-E R2 LED with max output of
165 lumens
·Powered by 2xAAA batteries for max runtime of 5
hours and 15 minutes
·Two brightness levels available
·Reverse rear switch design for one-handed
operations
·High efficiency constant current circuitry provides
unwavering and dependable output
·Stainless steel clip included
·Toughened ultra-clear mineral glass with
anti-reflective coating
·Constructed from aerospace grade aluminum alloy
·HAIII military grade hard-anodized
·Waterproof in accordance with IPX8 (2-meter
submersible)
·Impact resistant to 1.5 meters
Dimensions
Length: 5.04’’ (128mm)
Head diameter: 0.55’’ (14mm)
Tail diameter: 0.55’’ (14mm)
Weight: 0.78oz (22g) (without battery)
Accessories
Spare o-ring
Battery Options
Nominal voltage
Primary AAA battery
Rechargeable AAA battery
LiFePO4 battery
Rechargeable Li-ion battery
TYPE
AAA 1.5V
AAA 1.2V
10400 3.2V
10400 3.7V
Compatible
Y (Recommended)
Y (Recommended)
N (Banned)
N (Banned)
Brightness & Runtime
HIGH LOW
165
LUMENS
min
5h15
(Beam Distance)
2120cd
(Impact Resistant)
IPX8,2m
32
min
LUMENS
45
92m
(Peak Beam Intensity)
1.5m
(Waterproof AND Submersible)
NOTICE:
The above data has been measured in
accordance with the international flashlight
testing standards ANSI/NEMA FL1 using 2 x
1.2 V 750mAh AAA batteries under laboratory
conditions. The data may vary slightly during
real-world use due to battery type, individual
usage habits and environmental factors.
Operating Instructions
Battery Installation
Please install 2xAAA batteries as illustrated.
WARNIG: Insert the battery with the positive
pole (+) pointing towards the head. The MT06
is not operational with incorrectly inserted
batteries.
AAA
AAA
Brightness Levels
With the light turned on, reactivate the MT06 within 2 seconds or simply press the switch halfway to
switch between high mode and low mode.
NOTE: The MT06 will begin adjusting output lumens automatically after 5 minutes of use, thus
preventing overheating and extending battery life.
Changing Batteries
Batteries should be replaced when output appears to be dim or the flashlight becomes unresponsive.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based
lubricant.
Warranty Service
All NITECORE® products are warranted for quality. Any defective / malfunctioning NITECORE® product
can be repaired free of charge for a period of 60 months (5 years) from the date of purchase. Beyond 60
months (5 years), a limited warranty applies, covering the cost of labor and maintenance, but not the
cost of accessories or replacement parts.
The warranty is nullified in all of the following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORE® products and services, please contact a local NITECORE®
distributor or send an email to service@nitecore.com
※All images, text and statements specified herein this user manual are for reference purpose only.
Should any discrepancy occurs between this manual and information specified on www.nitecore.com,
information on our official website shall prevail. Sysmax Industry Co., Ltd. reserves the rights to interpret
and amend the content of this document at any time without prior notice.
Please find us on facebook:
SYSMAX Industry Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address: Rm1401-03, Glorious Tower, 850 East Dongfeng Road,
Guangzhou, China 510600
Nitecore Flashlight
20170119
Thanks for purchasing NITECORE! Thanks for purchasing NITECORE!