NITECORE CB6 User Manual

The All-Round Flashlight Expert

Features

• Featuring five individual light sources: two main LEDs plus secondary red, green and blue LEDs.

• Four selectable modes of output (red, green, blue and white)

• Dual side switches offer increased control of color modes

• Purpose-designed for law enforcement, hunting and tactical applications

• White light mode is powered by a premium CREE XP-G2(R5) LED, providing up to 440 lumens of output

• Up to 400 hours runtime on low

• Integrated “Precision Digital Optics Technology” provides extreme reflector performance

• Equipped with a unique multi-colored (red, green and blue) signaling mode

• Dual side switches control white and colored LEDs independently.

• Side switch features integrated power indicator light for displaying remaining battery power (patented)

• Instant-start - enter turbo mode directly

• Physical reverse polarity protection mechanism (patented)

• Stainless steel titanium-plated clip

• Stainless steel retaining ring protects the core components from damage

• Toughened ultra-clear mineral glass with anti-reflective coating

• Constructed from aero-grade aluminum alloy

• HAIII military grade hard-anodized finish

• Waterproof in accordance with IPX-8 (two meters submersible)

• Impact resistant to 1.5 meters

• Tail stand capability

Dimensions

Length: 143mm (5.63”) Head Diameter: 40mm (1.57”) Tail Diameter: 25.4mm (1”) Weight: 138grams (4.87oz)(without battery)

CR6, CG6, CB6

User Manual

CB6: Main blue light modes is powered by a premium CREE XP-E(D4) LED

White Light

TURBO

440

LUMENS

1h45

min

2×CR1231×18650

1h45

min2h45min5h45min

White Light

MID

LOW

160

LUMENS25LUMENS1LUMENS35LUMENS15LUMENS3LUMENS

7h43h400

LUMENS

3h30

HIGH

280

min

32h260

190m

(Beam Distance)

9000cd

(Peak Beam Intensity)

1.5m

(Impact Resistant)

IPX-8, 2m

(Waterproof AND Submersible)

White Light

LOWER

Blue Light

HIGH

2h45

1100cd

min

66m

Blue Light

MID

LOW

11h45

(Beam Distance)

(Peak Beam Intensity)

NOTICE

The above data has been measured in accordance with the international flashlight testing standards ANSI/NEMA FL1 using one x 3.7V 2600mAh Nitecore 18650 battery and 2 x 3V 1550mAh Nitecore CR123 batteries under laboratory conditions. The data may vary slightly during real-world use due to battery type, individual usage habits and environmental factors. NITECORE (SYSMAX) is a member of PLATO, participating in and helping to develop the ANSI FL1 standard of measurement. Product testing data is in accordance with these internationally recognized scientific standards.

Operation Instructions

Battery Installation

Insert one 18650 battery or two CR123 / RCR123 batteries with the positive pole pointing forward (toward the light head).

Accessories

Quality holster, clip, tactical ring, lanyard, spare tail cap, spare O-ring

Optional accessories

Remote switch (RSW1), Gun Mount (GM02, GM03, GM04)

Battery Options

Nominal voltage

Compatible

Y (Recommended)

Primary Lithium battery

18650 Rechargeable Li-ion battery

Rechargeable Li-ion battery

SIZE

CR123 3V

18650 3.7V

RCR123 3.7V

Brightness & Runtime

CR6: Main red light mode is powered by a premium CREE XP-E(R2) LED

White Light

TURBO

HIGH

440

280

LUMENS

1h45

min

3h30

2×CR1231×18650

1h45

min

min2h45min5h45min

190m

9000cd

CG6: Main green light mode is powered by a premium CREE XP-E(G2) LED

White Light

TURBO

HIGH

440

280

LUMENS

1h45

min

3h30

2×CR1231×18650

1h45

min

min2h45min5h45min

190m

9000cd

White Light

MID

LOW

160

LUMENS25LUMENS1LUMENS

7h43h400

32h260

(Beam Distance)

(Peak Beam Intensity)

1.5m

(Impact Resistant)

IPX-8, 2m

(Waterproof AND Submersible)

White Light

MID

LOW

160

LUMENS25LUMENS1LUMENS

7h43h400

32h260

(Beam Distance)

(Peak Beam Intensity)

1.5m

(Impact Resistant)

IPX-8, 2m

(Waterproof AND Submersible)

Red Light

White Light

HIGH

LOWER

120

LUMENS45LUMENS12LUMENS

4h30

3h15

5700cd

Green Light

White Light

HIGH

LOWER

185

LUMENS90LUMENS30LUMENS

2h45

7250cd

Red Light

min

150m

(Beam Distance)

(Peak Beam Intensity)

Green Light

min

170m

(Beam Distance)

(Peak Beam Intensity)

Red Light

MID

15h55

11h37

Green Light

MID

10h45

7h31

LOW

WARNING

1. Ensure batteries are inserted with the positive (+) end pointing to the head. The Chameleon will not operate with incorrectly inserted batteries.

2. Ensure when turning the Chameleon on, the beam is directed away from the eyes of people or animals.

Momentary Illumination

Momentary illumination can be achieved by switching off the flashlight and then half pressing and holding the tail switch. Simply release the switch to turn the light off.

Switching ON/OFF

To switch ON: Press the button on the tailcap until a “click” is heard. To switch OFF: Press the button on the tailcap a second time until a “click” is heard.

Brightness Selection

Two side switches control the two main LEDs as well as strobe / SOS modes.

With the light turned on at the tailcap, press the left switch repeatedly to cycle though the following WHITE LED brightness levels: ultra-low, low, medium, high and turbo. Once a desired setting is displayed, it will be saved by turning the light off at the tail switch.

With the light turned on at the tailcap, press the right switch repeatedly to cycle though the following COLORED LED brightness levels: main color low

-> main color medium -> main color high -> secondary red -> secondary

green -> secondary blue. Once a desired setting is displayed, it will be saved by turning the light off at the tail switch.

Thanks for purchasing NITECORE!

The All-Round Flashlight Expert

Instant High Mode

With the light turned off, press and hold the side control switch all the way down then press the tail switch to go directly to turbo or high (main color) mode. This feature will assist in directly switching to the highest modes of output for emergency situations.

NOTE: When using two CR123 batteries, the light will automatically lower its output after 20 minutes to prevent overheating and battery damage.

Strobe, Beacon and Signal Modes

With the light turned on, press and hold the left (white) switch all the way down for more than 1 second to cycle through the following modes: strobe mode -> location beacon -> SOS.

With the light turned on, press and hold the right switch (colored) all the way down for more than 1 second to active police warning signal. Press the switch again to turn this mode off.

NOTE: Among all special modes, only strobe mode can be saved.

Power Tips

1. With the light switched on, the power indicator on brightness adjustment button will blink once every two seconds when power levels reach 50%.

2. With the light switched on, the power indicator on brightness adjustment button will blink rapidly when power levels are low.

Changing Batteries

When the power indicator blinks rapidly this indicates the batteries need to be replaced. Alternatively if the light becomes dim or unresponsive to adjustment this also indicates batteries need to be replaced.

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant.

Warranty Service

All NITECORE® products are warranted for quality. DOA / defective products can be exchanged for replacement through a local distributor/dealer within the 14 days of purchase. After 14 days, all defective / malfunctioning NITECORE® products will be repaired free of charge for a period of 18 months from the date of purchase. After 18 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts. The warranty is nullified in all of the following situations:

1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized parties.

2. The product(s) is/are damaged through improper use.

3. The product(s) is/are damaged by leakage of batteries.

For the latest information on NITECORE® products and services, please contact your national NITECORE® distributor or send an email to service@nitecore.com

The Nitecore official website shall prevail in case of any product data changes.

Please follow our facebook for more info: NITECORE Flashlights

SYSMAX Industry Co., Ltd.

TEL: +86-20-83862000 FAX: +86-20-83882723 E-mail: info@nitecore.com Web: www.nitecore.com Address： Rm1407-08, Glorious Tower, 850 East Dongfeng Road,

Guangzhou, China 510600