NISSAN Connect User Manual
2011 NAVIGATION
SYSTEM
OWNER’S MANUAL
For your safety, read carefully and keep in this vehicle.
®
FOREWORD
NISSAN NAVIGATION SYSTEM HELPDESK CONTACT INFORMATION
For assistance or inquiries about the NISSAN
Navigation System, or to order updated map data,
contact the NISSAN NAVIGATION SYSTEM
HELPDESK at:
ADDRESS: P.O. Box 1588,
•
Orem, UT 84059-992
E-MAIL: Nissan-Navi-Info@navteq.com
•
WEB SITE: www.navigation.com or
•
www.nissan.ca
PHONE: 1-888-661-9995
•
HOURS: 6:00 AM to 5:00 PM
•
(Pacifi c Time)
NISSAN CONSUMER AFFAIRS DEPARTMENT
For assistance or inquiries about the NISSAN
warranty, service or general questions, contact
the NISSAN Consumer Affairs Department at:
For U.S. customers
Nissan North America, Inc.
Consumer Affairs Department
P.O. Box 685003
Franklin, TN 37068-5003
1-800-NISSAN-1
(1-800-647-7261)
For Canadian customers
Nissan Canada Inc.
5290 Orbitor Drive
Mississauga, Ontario L4W 4Z5
1-800-387-0122
Thank you for purchasing a NISSAN vehicle
This user’s manual is for the navigation system
only. This manual contains operating instructions
for the NISSAN Navigation System offered in
your NISSAN vehicle.
Please read this manual carefully to ensure safe
operation of the navigation system.
Because of possible specifi cation changes
•
and optional equipment, sections of this
manual may not apply to your vehicle.
All information, specifi cations and illustra-
•
tions in this manual are those in effect at the
time of printing. NISSAN reserves the right to
change specifi cations or design at any time
without notice.
Do not remove this manual from the vehicle
•
when selling this vehicle. The next user of this
navigation system may need the manual.
Table of
Introduction
1
Contents
Getting started
Map settings
Navigation
Other settings
General system information
Troubleshooting guide
Index
2
3
4
5
6
7
8
1 Introduction
How to use this manual ............................1-2
For safe operation ..............................1-2
Reference symbols .............................1-2
Safety information .................................1-2
Laser product .....................................1-3
HOW TO USE THIS MANUAL SAFETY INFORMATION
This manual uses special words, symbols and
icons that are organized by function.
Please refer to the following items to understand
how to use this manual properly.
FOR SAFE OPERATION
WARNING
Indicates the presence of a hazard that
could cause death or serious personal
injury. To avoid or reduce the risk, the
procedures must be followed precisely.
CAUTION
Indicates the presence of a hazard that
could cause minor or moderate personal injury or damage to your vehicle.
To avoid or reduce the risk, the procedures must be followed carefully.
NOTE:
Indicates items that help you understand
and maximize the performance of your
vehicle. If ignored, they may lead to a malfunction or poor performance.
REFERENCE SYMBOLS
INFO:
Indicates information that is necessary for efficient use of your vehicle or accessories.
Reference page:
Indicates the title and page that you should refer
to.
MAP:
This is an example of how a button on the control
panel will be shown.
“Route”:
This is an example of a key/item displayed on the
screen.
This system is primarily designed to help you
reach your destination, and it also performs other
functions as outlined in this manual. However,
you, the driver, must use the system safely and
properly. Information concerning road
conditions, traffic signs and the availability of
services may not always be up-to-date. The system is not a substitute for safe, proper and legal
driving.
Before using the navigation system, please read
the following safety information. Always use the
system as outlined in this manual.
WARNING
● To operate the navigation system,
first park the vehicle in a safe location and set the parking brake. Operating the system while driving can
distract the driver and may result in a
serious accident.
● Do not rely on route guidance alone.
Always be sure that all driving maneuvers are legal and safe in order to
avoid accidents.
● Do not disassemble or modify this
system. If you do, it may result in
accidents, fire or electrical shock.
1-2 Introduction
LASER PRODUCT
● If you notice any foreign objects in
the system hardware, spill liquid on
the system or notice smoke or a
smell coming from it, stop using the
system immediately and contact a
NISSAN dealer. Ignoring such conditions may lead to accidents, fire or
electrical shock.
CAUTION
● Do not use this system if you notice
any malfunctions such as a frozen
screen or the lack of sound. Continued use of the system may result in
accidents, fire or electrical shock.
● Some states/provinces may have
laws limiting the use of video
screens while driving. Use this system only where it is legal to do so.
● Extreme temperature conditions [below -4 °F (-20 °C) and above 158 °F
(70 °C)] could affect the performance
of the system.
NOTE:
Do not keep the navigation system running
with the engine stopped. Doing so may
discharge the vehicle battery. When you
use the navigation system, always keep
the engine running.
WARNING
● Do not disassemble or modify this
system. There are no user serviceable parts in this navigation system.
● If maintenance, adjustments and operations other than those specified
in this manual are attempted, injury
due to laser radiation and exposure
could occur.
Required XM Radio威
and NavTraffic威
monthly subscriptions
sold separately. XM
NavTraffic威 only
available in select
markets. For more
information, see
www.xmradio.com/
navtraffic.
Introduction 1-3
MEMO
1-4 Introduction
2 Getting started
Control buttons and functions.......................2-2
Control panel ..................................2-2
Steering wheel switch. . . ........................2-3
Basic operation ...................................2-4
Functions disabled while driving..................2-4
Touch screen operation .........................2-5
Menu screen operation..........................2-6
How to input characters.........................2-7
CONTROL BUTTONS AND FUNCTIONS
CONTROL PANEL
䊐
1
button:
Press to change the display brightness between day and night modes. While the
mode is being displayed, the brightness can
be adjusted using the scroll knob.
Press and hold to turn the display off. Press
again to turn the display on.
“DISPLAY SETTINGS”
(page 5-3)
2-2 Getting started
2
Touch screen display
䊐
3
MAP button:
䊐
Press to display the current location map
screen.
4
NAV button:
䊐
Press to access the functions of the Navigation system.
5
TRAF button:
䊐
Press to view traffic information on the
route.
LNV0915
6
SETUP button:
䊐
Press to access the system settings.
7
BACK button:
䊐
Press to return to the previous screen.
8
Scroll knob:
䊐
Turn to scroll through the items in a list.
Press to select a menu item. When the
screen is not displaying a list or menu, the
knob is used to control the audio system.
9
SD-card location:
䊐
An SD-card with MAP data can be inserted
here.
10
Volume control knob/ON-OFF button:
䊐
Rotate clockwise to increase the volume or
counterclockwise to lower the volume.
Press to turn the audio system on or off.
Versa
WNV0996
STEERING WHEEL SWITCH
The volume control buttons on the steering
1
wheel
level of the voice guidance given by the Navigation System. Press the + button to increase the
volume or the – button to decrease the volume
while the voice guidance is speaking. If the volume control buttons are pressed at any other
time, only the volume of the audio system is
adjusted.
The other steering wheel switches are used for
the audio system and Bluetooth姞 Hands-Free
Phone system and are not used to control the
Navigation System.
For more information about the audio system and
Bluetooth姞 Hands-Free Phone system, see the
vehicle’s Owner’s Manual.
can be used to control the volume
䊐
Sentra
WNV0997
Getting started 2-3
BASIC OPERATION
FUNCTIONS DISABLED WHILE
DRIVING
2-4 Getting started
To ensure safe driving, some functions cannot be
operated or have limited operation when the vehicle driving speed is above 5 mph (8 km/h).
The on-screen text and keys for these restricted
LNV2000
functions will be “grayed-out” or muted and can-
not be selected while driving. In some cases, a
screen message will appear indicating a restricted function.
Restricted functions while driving include:
● Character (letter and number) input screen
during destination entry (street address,
places, intersection)
● Places search by name and city name
● Scrolling and viewing of certain navigation
lists
● Adding/editing address book entries
● Adding/editing home location
● Storing current position, information, destina-
tions
These functions will become available again
when the vehicle speed is reduced to 5 mph (8
km/h).
Destination functions available while driving include:
● Home
● Previous destinations
● Nearby places
● Address book
● My places
● Map input
TOUCH SCREEN OPERATION
The same operations described for the scrolling
dial are possible using touch screen operation.
LNV0919
Examples of touch screen operation
Selecting an item:
When any item is touched, the next screen is
displayed.
Getting started 2-5
LNV0920 LNV0921 LNV0918
Adjusting:
Touch the “+”, “-”, “>” or “<” key to adjust a
setting.
2-6 Getting started
Scrolling through a message or list:
Touch the
the screen repeatedly to scroll through a message or a list. When scrolling a lengthy list, you
can also touch the screen and slide your finger
along the scroll bar where shown to scroll more
quickly.
(up) or (down) keys on
MENU SCREEN OPERATION
Menu screens and their purpose
Press one of the application buttons to activate
the corresponding menu screen:
● NAV (Navigation)
● MAP
● SETUP (Settings)
● TRAF (Traffic)
How to select a menu item
1. As an alternative to using the touch screen,
turn the scrolling dial clockwise or counterclockwise to scroll through the menu items
until the preferred item is highlighted.
2. To select the preferred item, press the
scrolling dial to enter.
3. Press the
ous screen will be displayed and the
changes will be saved.
BACK button. The previ-
HOW TO INPUT CHARACTERS
Character (letter and number) input
screen
Alphanumeric characters are used when setting
a destination, searching for an address, editing
stored locations, etc.
LNV0922 LNV0923
1. Touch characters on the touch keyboard
and they will appear in the field at the top of
the screen. When the entry is complete,
touch the “OK” key.
Alternatively, use the scrolling dial to highlight a character and press the dial to select
that character.
NOTE:
● Press the
to the previous screen.
● On every character entry, the touch key-
board display will narrow to only the letters that are possible to enter after the
current letter.
● Symbol and number keys are available
when the “123/ABC” key is touched.
BACK button to return
● Touch the “123/ABC” key to toggle the
display between the touch keyboard for
letters and the touch keyboard for numbers and symbols.
2. To delete the last entry, touch the “Delete”
key or hold it to delete all entries at once.
3. After finalizing the entries, touch the “List” or
“OK” key for the completed list screen.
Getting started 2-7
MEMO
2-8 Getting started
3 Map settings
Map types ........................................3-2
2-Dimensional (2D) view ........................3-2
3-Dimensional (3D) view ........................3-2
Screen information (2D or 3D) ...................3-3
Moving a map . . . ..................................3-4
Returning to the current vehicle location...........3-4
Map options menu screen ..........................3-5
Changing the map scale . . . ........................3-5
Map scale . . . ..................................3-5
Looking at information on the map ...................3-6
Map symbols...................................3-6
Map settings for the map screen ....................3-7
Map SD-card .....................................3-8
How to handle the SD-card......................3-8
SD-card replacement . . . ........................3-9
How to order map data updates..................3-9
About the map data.............................3-9
End-user terms................................3-10
MAP TYPES
2D
LNV0934
2-DIMENSIONAL (2D) VIEW
The 2D map is a two-dimensional (flat) representation of the map data, similar to a road map,
focused on the vehicle’s position (vehicle icon).
“SCREEN INFORMATION (2D or
3D)” (page 3-3)
“MAP SETTINGS FOR THE MAP
SCREEN” (page 3-7)
3-2 Map settings
3D
LNV0935
3-DIMENSIONAL (3D) VIEW
The 3D map displays the map from an elevated
perspective, providing a panoramic view over a
long distance.
The map in 3D view always appears with the current forward direction facing up (heading up).
“SCREEN INFORMATION (2D or
3D)” (page 3-3)
“MAP SETTINGS FOR THE MAP
SCREEN” (page 3-7)
SCREEN INFORMATION (2D or 3D)
1
“Voice” key
䊐
Touch to repeat the voice guidance while a
route is active. Touch and hold to switch the
voice guidance on and off.
2
Audio information
䊐
Indicates the radio station, CD track number or other audio information currently
playing.
3
Next maneuver road name
䊐
Indicates the name of the next road in the
route guidance. This is only shown if route
guidance is active.
4
Suggested route
䊐
Appears as a bold blue line during route
guidance.
5
Clock
䊐
Indicates the current time.
6
Direction indicator and distance to next ma-
䊐
neuver on the route
LNV0936
When route guidance is active but you have
deviated from the route, this area displays a
compass icon with an arrow indicating the
destination direction.
When route guidance is active and you are
on the route, this area indicates the distance (in miles or kilometers) to the next
point and the turning direction at that point.
7
Estimated time of arrival and distance to
䊐
destination or remaining time of travel and
distance to destination.
When touching this button, the indicator will
switch between estimated arrival time and
the remaining travel time.
This indicator only appears once the destination is set and the route guidance is
initiated.
8
Compass icon
䊐
Indicates the direction of the map. When in
2D mode, touching this icon will switch the
map view between the North Up and Heading Up (or actual direction) modes.
9
Scale indicator
䊐
Indicates the scale of the map.
Map settings 3-3
10
Vehicle icon
䊐
Indicates the current location and direction
of the vehicle.
11
Current road indicator
䊐
The location of where the car is positioned.
12
“Menu” key
䊐
When touching this key, the items “Store
Current Position”, “Show Position/GPS
Information”, “Show Destination Information” or “Map Setup” can be selected.
“MAP OPTIONS MENU
SCREEN” (page 3-5)
13
Zoom in and zoom out keys
䊐
Use to zoom the map in or out.
3-4 Map settings
MOVING A MAP
LNV0937
To scroll the map in either direction:
1. Touch and release the screen anywhere on
the map.
2. Touch the screen again and move your finger along the screen in the direction you
wish to scroll.
After releasing and touching the map again, a
marker will be displayed at the point touched
and, if possible, the position determined.
NOTE:
● If the map is in 3D view, touching the map to
scroll will automatically switch the map to the
2D view and will automatically orientate the
map North Up.
● If the map is in 2D view, the map will be oriented North Up.
● When the current location of the vehicle is
recognized, the street name will be displayed
at the bottom of the screen. If the location is
not recognized by the system, coordinates
corresponding to the marker’s position will be
displayed.
RETURNING TO THE CURRENT VEHICLE LOCATION
The basic map screen displays the current location of the vehicle. The current location can be
displayed again even after the map is moved, or
after the menu screen is displayed.
Press MAP or the
current location will be displayed on the map.
BACK button and the
MAP OPTIONS MENU SCREEN CHANGING THE MAP SCALE
The Map Options menu allows you to quickly
store the current position, show position information or destination information, and adjust the
map settings.
LNV0938 LNV0939
1. Touch the “Menu” key while the route guidance map is displayed.
2. The following options are available for selection:
● Store Current Location
● Show Position/GPS Information
● Show Destination Information
● Map Setup
When zooming in or out, the scale on the bottom
right side of the screen changes to indicate the
new scale level.
MAP SCALE
The following scales are available depending on
the map view:
2D view 3D view
Per approximately 1/2 inch
(1 cm)
150 ft (50 m) 150 ft (50 m)
300 ft (100 m) 300 ft (100 m)
600 ft (200 m) 600 ft (200 m)
1/4 mile (500 m) 1/4 mile (500 m)
1/2 mile (1 km) 1/2 mile (1 km)
1 mile (2 km) 1 mile (2 km)
Per approximately 1/2 inch
(1 cm)
Map settings 3-5
LOOKING AT INFORMATION ON THE
MAP
2D view 3D view
2.5 mi (5 km) —
5 mi (10 km) —
10 mi (20 km) —
25 mi (50 km) —
50 mi (100 km) —
100 mi (200 km) —
250 mi (500 km) —
Icons of various categories of locations can be
displayed on the map.
MAP SYMBOLS
This navigation system uses symbols to display
various types of facilities. The following icons are
used on the map screen:
LNV0998
3-6 Map settings
MAP SETTINGS FOR THE MAP
SCREEN
Other settings are available for the map screen,
such as switching the map view or changing the
map direction.
1. Press the SETUP button.
2. Touch the “Navigation” key.
3. Touch the “Map Setup” key.
When selected, the system will offer the following map setting options:
LNV0940 LNV0942
● Map View
Touch the “Map View” key to toggle between the 2D or 3D map view.
● North/Heading Up Map
Touch the “North/Heading Up Map” key to
toggle the display between Heading Up and
North Up. When “Head” is selected, the
screen shows the map in the driving
direction. When “North Up” is selected, the
top of the map is always orientated north.
● Auto Zoom
Touch the “Auto Zoom” key to toggle automatic zooming on and off.
Map settings 3-7
MAP SD-CARD
● Show Places on Map
Touch the “Show Places on Map” key to activate or deactivate the display of place
icons on the map. When the icon on the
map is touched, place information will be
displayed.
● Show Incidents
Touch the “Show Incidents” key to enable
traffic incident information on the map
screen.
“TRAFFIC FEATURE”
(page 4-30)
● Show Traffic Flow
Touch the “Show Traffic Flow” key to enable
traffic flow information on the map screen.
“TRAFFIC FLOW FEATURE”
(page 4-32)
● Map Data Information
Touch the “Map Data Information” key and
the follow-up screen will display the version
of the current installed map.
“MAP SD-CARD” (page 3-8)
LNV0941
The SD-card slot is located on the front of the
unit. When you purchase this system, an SDcard with map data is provided.
NOTE:
● Before inserting the map SD-card con-
firm that there is no SD-card already in
the slot.
● The SD-card slot can only read the SD-card
with map data provided specifically for use
with the vehicle’s navigation system. The system will not read other SD-cards.
HOW TO HANDLE THE SD-CARD
When handling the SD-card, please be careful
and adhere to the following instructions:
CAUTION
● Handle the SD-card with care. Never
touch the metal contacts.
● Do not use any conventional cleaner,
benzine, thinner, or antistatic spray.
● If you need to clean the SD-card use
a soft cloth.
● Never attempt to use an SD-card that
has been cracked, deformed or repaired using adhesive. Doing so may
damage the equipment.
● Do not try to bend the SD-card. Do
not use any SD-card that is bent or
cracked.
● Do not put on any sticker or write
anything on either surface.
● Handle the SD-card carefully to
avoid contamination or flaws.
Otherwise, the data may not be read
properly.
3-8 Map settings
● Do not store the SD-card in locations
exposed to direct sunlight, or in high
temperatures or humidity.
● Always place the SD-card in its storage case when not in use.
SD-CARD REPLACEMENT
For additional SD-cards with map data, contact
the Nissan Navigation Helpdesk.
HOW TO ORDER MAP DATA UPDATES
To order updated map data, visit
www.nissannavigation.com or contact the
Nissan Navigation Helpdesk.
ABOUT THE MAP DATA
● Bosch has compiled the digitized map data
into a usable format. © 2009 Robert Bosch
GmbH all rights in compilation software
reserved. Due to the production timing of the
map data, some new roads may not be
included, or some names and roads may be
different from those in use at the time this map
data is used.
● Traffic control and regulation data used in this
map data may be different from those in use at
the time this map data is used. When driving,
follow the actual traffic control signs and notices on the roads.
● Reproducing or copying this map software is
strictly prohibited by law.
WARNING
● This navigation system should not be
used to replace your own judgement.
No itinerary suggested by this navigation system should ever override
any freeway regulations, your own
judgement, or a knowledge of safe
driving practices. Do not follow the
navigation system’s suggested itinerary if it would cause you to perform
a dangerous or illegal act, place you
in a dangerous situation, or take you
into an area you consider unsafe.
● The advice provided by the navigation system is to be regarded as a
suggestion only. There may be times
when the navigation system displays
the vehicle’s location incorrectly,
fails to suggest the shortest route, or
fails to direct you to your desired
destination. In such instances, rely
on your own judgement taking into
account the driving conditions at the
time.
● Do not use the navigation system to
locate emergency services. The database does not contain a complete
listing of emergency services such as
police stations, fire stations, hospitals and walk-in clinics. Please show
discretion and ask for directions in
such instances.
● As the driver, you alone are responsible for your driving safety.
– In order to avoid a traffic accident,
do not operate the system while
driving.
Map settings
3-9
Loading...