Nissan ARMADA QRG 2005 Service Manual

QUICK REFERENCE G UI DE

2005 ARMADA

SH IFT_space

NISSAN ARMADA INSTRUMENT PANEL FEATURES

STEERING WHEEL SWITCHES FOR AUDIO CONTROL

HEADLIGHT AIMING CONTROL

(BE HIND STEERING WHEEL)

HEADLIGHT AND TURN SIGNAL CONTROL

TIRE PRESSURE

MONITORING SYSTEM

WINDSHIELD WIPER/ WASHER SWITCH

CRUISE CONTROL MAIN/SET SWITCHES

TOW MODE SWITCH

FRONT PASSENGER AIR BAG STATUS LIGHT

FOUR-WHEEL DRIVE (4WD) SHIFT SWITCH

(BE HIND STEERING WHEEL)

CLIMATE CONTROLS

AUDIO SYSTEM

HEADLIGHT AND TURN SIGNAL CONTROL

HEADLIGHT SWITCH

■ Turn the headlight switch to the to turn on the front parking, tail, license plate and

position

instrument panel lights.

■ Turn the headlight switch to the position to turn on the headlights. All other lights remain on.

HIGH BEAM

■ Push the headlight switch forward to select the high beam function. The blue

indicator light illuminates. Pull the headlight switch back to the original

position to select the low beam. The blue indicator light goes off.

■ Pull and release the headlight switch to flash the headlight high beams on and off.

TURN SIGNAL SWITCH

■ Move the headlight control switch up or down to signal the turning direction. When the turn is completed, the turn signals cancel automatically.

■ To signal a lane change, move the headlight control switch up or down to the point where the indicator light begins to flash, but the headlight control switch does not latch.

AUTOMATIC HEADLIGHT OPERATION

The autolight system can:

■ Turn the headlights on automatically when it is dark.

■ Turn the headlights off automatically when it is light.

■ Keep the headlights on for 45 seconds after you turn the ignition switch to

OFF and all doors are closed.

TO ACTIVATE THE AUTOLIGHT SYSTEM:

■ Turn the headlight switch to the AUTO position, then turn the ignition switch to ON.

TO DEACTIVATE THE AUTOLIGHT SYSTEM:

■ Turn the headlight switch to the OFF,

or position.

FOG LIGHT OPERATION (if so equipped)

■ Turn the switch to the position to turn on the fog lights.

■ Turn the switch to the OFF position to turn off the fog lights.

HEADLAMP AIMING CONTROL

Depending on the number of occupants in the vehicle and the load it is carrying, the headlight axis may be higher than desired. If the vehicle is traveling on a hilly road, the headlights may directly hit the rearview mirror of the vehicle ahead or the windshield of the oncoming vehicle. The light axis can be lowered with the operation of the switch.

■ The larger the number designated on the switch, the lower the axis.

■ When traveling without a heavy load or on a flat road, select position 0.

STEERING WHEEL SWITCHES FOR AUDIO CONTROL

■ To turn the steering wheel audio system on, press POWER.

■ To choose AM, FM1 or FM2, press

MODE repeatedly.

< >

■ The

switch can be used to perform the following:

• Push the

• Push the broadcasting radio station.

• Push the

< >

switch for less than 1.5 seconds to change to a preset station.

< >

switch for more than 1.5 seconds to seek to the next

< >

switch for less than 1.5 seconds while playing a CD to change

programs on the CD.

• If the vehicle is equipped with a CD changer, press for more than 1.5

seconds to change between CDs.

■ Push the VOL control switch up or down to increase or decrease volume.

TIRE PRESSURE MONITORING SYSTEM

This system monitors tire pressure; if the pressure is low (less than 28 psi), the warning light will come on and the chime will sound (for about 10 seconds). Please remember, this system does not detect a sudden drop in tire pressure (for example, a blowout while driving). It also does not monitor the air pressure in the spare tire.

If the low tire pressure warning light comes on, check the tire pressure in all four tires. Adjust the low tire to the recommended COLD tire pressure shown in your Owner’s Manual.

+ 9 hidden pages