Nissan Altima Sedan 2013, 2013 Altima Sedan Technical Manual
Important!
Page1
2013 Nissan Altima Sedan
CM6200/Blade-AL Install
TOOLS AND PARTS
1. Digital Multi-Meter
2. Crimpers
3. Soldering Iron and Solder
4. Panel Removal Tool(s)
5. 10mm socket
6. Phillips Head Screwdriver
7. CM6200
8. ADS Blade-AL
9. (1) Relay and (5) 1A Diodes
This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s
responsibility to verify any circuit b e for e interfacing with it using a digital multi-meter. Firstech, LLC. assumes no re sponsibility with
regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.
Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.
Important!
Page2
FUNCTION
COLOR
LOCATION
POLARITY
12 VOLTS (40A)
Green
Backside of driver’s side dash fuse box, white 1 pin plug
(+)
12 VOLTS (40A)
White
BCM, behind instrument cluster, white 15 pin plug, pin 11
(+)
(+) IGNITION
White
BCM, behind instrument cluster, black 40 pin plug, pin 27
(+)
(-) IGNITION
Green
BCM, behind instrument cluster, black 40 pin plug, pin 30
(-)
ACCESSORY 1
Red
BCM, behind instrument cluster, black 40 pin plug, pin 26
(+)
ACCESSORY 2
Pink
BCM, behind instrument cluster, black 24 pin plug, pin 9
(+)
(+) STARTER
Red
IPDM under the hood, black 1 pin plug
(+)
(-) STARTER 1
Brown
BCM, behind instrument cluster, black 40 pin plug, pin 22
(-)
(-) STARTER 2
Red
IPDM under the hood, white 32 pin plug, pin 15
(-)
PARKING LIGHTS
Red
Front of driver’s side fuse box, brown 16 pin plug, pin1
(+)
DISARM/UNLOCK
Empty OR Tan
BCM, behind instrument cluster, green 40 pin plug, pin 34
(-)
ARM/LOCK
Empty OR Green
BCM, behind instrument cluster, green 40 pin plug, pin 19
(-)
TRUNK RELEASE
Brown
BCM, behind instrument cluster, black 40 pin plug, pin 40
(-)
DRIVER’S DOOR PIN
Brown
BCM, behind instrument cluster, gray 24 pin plug, pin 16
(-)
PUSH-TO-START (PTS)
Red
BCM, behind instrument cluster, green 40 pin plug, pin 1
(-)
SECURITY LIGHT
Green
BCM, behind instrument cluster, green 40 pin plug, pin 18
(-)
CAN HIGH
Blue
BCM, behind instrument cluster, black 40 pin plug, pin 20
(DATA)
CAN LOW
Pink
BCM, behind instrument cluster, black 40 pin plug, pin 19
(DATA)
2013 Altima Sedan
Y Y Y Y Y Y Y
Y
2013 Nissan Altima Sedan CM6200/Blade-AL Install
Connections
BLADE-AL with DL-NI3
Feature coverage
SECURE TAKEOVER
DATA IMMO BYPASS
DOOR STAT OUTPUT
TRUNK STAT OUTPUT
HOOD STAT OUTPUT*
BRAKE PEDAL STATUS
E-BRAKE OUTPUT
TACHOMETER OUTPUT
This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s
responsibility to verify any circuit b e for e interfacing with it using a digital multi-meter. Firstech, LLC. assumes no re sponsibility with
regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.
Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.
Important!
Page3
2013 Nissan Altima Sedan CM6200/Blade-AL Install
Disassembly
1. Remove panel from the front, left hand side of the center console.
2. Remove (2) 10mm bolts holding the hood and gas flap release
levers in place.
3. Remove the silver trim piece on the left side of the radio/climate
control panel.
4. Remove (2) Phillips head screws from the front of the steering
column shroud. These screws can be accessed by turning the
steering wheel left and right.
5. Remove the top half of the steering column shroud and pull the
black trim panel surrounding the instrument cluster straight
towards you and remove.
6. Remove (1) Phillips head screw above the instrument cluster.
7. Unclip and remove panel surrounding push-to-start switch and
instrument cluster.
8. Remove (2) Phillips head screws from left and right of instrument
cluster to remove and access BCM.
9. *Optional: Remove (1) Phillips head screw from the bottom side of
the steering column shroud. This is only needed to access the horn
wire.
This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s
responsibility to verify any circuit b e for e interfacing with it using a digital multi-meter. Firstech, LLC. assumes no re sponsibility with
regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.
Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.
Important!
Page4
2013 Nissan Altima Sedan CM6200/Blade-AL Install
Body Control Module
This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s
responsibility to verify any circuit b e for e interfacing with it using a digital multi-meter. Firstech, LLC. assumes no re sponsibility with
regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.
Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.
Loading...