Ninja XSK770 User Manual

®
Professional Prep System XSK770
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Never leave the appliance unattended while in use. CAUTION: Blades are Sharp! Handle carefully.
Avoid contact with moving parts. Keep fingers out of the chute opening. Never feed food by hand. Always use food pusher
SAVE THESE INSTRUCTIONS
1 Place the salad shooter onto the bowl and turn
clockwise to lock in place on the motor base. (Fig. 1)
2 Place the slinger inside the salad shooter. (Fig. 2) 3 Use the finger holes to grasp the selected disc and
place it over the slinger. (Fig. 2)
4 Place the lid on the salad shooter and turn
clockwise to lock in place. (Fig. 2) Place a bowl (not included) underneath the chute to catch all the food coming out.
5 Plug the power cord into the electrical outlet and
press on the power button (
).
6 For best results, use speeds 2 or 3 when operating
the salad shooter.
7 Add the food that you want to slice, shred or
grate through the feed chute on the lid. (Fig. 2)
8 Use the assembled food pusher to push the food
through the feed chute. (Fig. 2) The food will come out of the chute as it is processed. If the food to be sliced is of a small diameter, use the small feed chute by twisting the food pusher and removing the inner tube. Feed the food to be sliced through the smaller chute.
TIP: Twist the inner tube counter clockwise to
unlock it from the food pusher.
9 When finished, turn the power off and remove the
lid. Using the finger holes, carefully lift the disc and the slinger from the salad shooter.
10 Turn the salad shooter counter clockwise and then
lift off the base.
11 The salad shooter, lid, food pusher, slinger
and discs are all dishwasher safe.
IMPORTANT: The motor base is not included
with this kit.
NOTE: For further instructions, please refer
to the Owner’s Guide.
Lid with Chute
Salad Shooter
Food
Pusher
Slinger
Fig. 1
Short Cut
French Fr y Disc
Crinkle Cut
Disc
Fig. 2
Grating Disc
Shredding
Storage Case
Disc
www.ninjakitchen.comHELP LINE 1-877-646-5288
Copyright © 2012 Euro-Pro Operating LLCXSK770.E.120928.3
Loading...