Ninja Smart Screen CT650 Instructions Manual

ninjakitchen.com

INSTRUCTIONS

CT650

Series

Smart Screen™
Blender

1 2

ninjakitchen.com

CONTENTS

THANK YOU

for purchasing the Ninja® Smart Screen™ Blender

Important Safety Instructions � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3

Getting to Know Your Ninja® Smart Screen™ Blender � � � � � � � � � � � � � 7

Parts � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8

Features � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9

AUTO-iQ® Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

MANUAL Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Before First Use � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10

Assembling & Using Your Total Crushing® Pitcher� � � � � � � � � � � � � � � �11

Care & Maintenance � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 15

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Storing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Resetting the Motor Thermostat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Ordering Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Troubleshooting Guide � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 16

Warranty � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 18

PLEASE READ CAREFULLY AND KEEP
FOR FUTURE REFERENCE�

These instructions are designed
to help youget a complete
understanding of your new
Ninja Smart Screen Blender.

If you have any questions,
please call our customer service
line at 1-877-646-5288.

TECHNICAL SPECIFICATIONS

Voltage: 120V, 60Hz

Watts: 1000W

TIP: You can find the model and serial
numbers on the QR code label located
on the back of the motor base.

RECORD THIS INFORMATION

Model Number: ����������������

Serial Number: �����������������

Date of Purchase ): �������������
(Keep receipt

Store of Purchase: ��������������

REGISTER YOUR PURCHASE

registeryourninja.com

Scan QR code using mobile device

3 4

ninjakitchen.com

1 Read all instructions prior to using

the appliance and its accessories.

2 Carefully observe and practice all

warnings and instructions. This unit
contains electrical connections
and moving parts that potentially
present risk to the user.

3 This product is provided with a

Stacked Blade Assembly. ALWAYS
exercise care when handling the
Stacked Blade Assembly. The
Stacked Blade Assembly is sharp
and is NOT locked to the container.
It is designed to be removable to
facilitate cleaning and replacement
if needed. ALWAYS grasp the
Stacked Blade Assembly by the
top of the shaft. Failure to use care
when handling the Stacked Blade
Assembly will result in a risk of
laceration.

4 Take your time and exercise care

during unpacking and appliance
setup. This appliance contains
sharp, loose blades that can cause
injury if mishandled.

5 Take inventory of all contents to

ensure you have all parts needed
to properly and safely operate your
appliance.

6 Unplug the appliance from the

outlet when not in use, before
assembling or disassembling parts,
and before cleaning. To unplug,
grasp the plug by the body and pull
from the outlet. NEVER unplug by
grasping and pulling the flexible
cord.

7 Wash all parts that may contact

food before use. Follow washing
instructions covered in this
instruction manual.

8 To protect against the risk of

electric shock, DO NOT submerge
the appliance or allow the power
cord to contact any form of liquid.

9 DO NOT use this appliance

outdoors. It is designed for indoor
household use only.

10 This appliance has a polarized plug

(one blade is wider than the other).
To reduce the risk of electric shock,
this plug will fit in a polarized outlet
only one way. If the plug does not
fit fully in the outlet, reverse the
plug. If it still does not fit, contact
a qualified electrician. DO NOT
modify the plug in any way.

11 DO NOT operate any appliance

with a damaged cord or plug, or
after the appliance malfunctions
or is dropped or damaged in any
manner. This appliance has no
user-serviceable parts. If damaged,
contact SharkNinja for servicing.

12 This appliance has important

markings on the plug blade. The
entire supply cord is not suitable
for replacement. If damaged, please
contact SharkNinja for service.

13 Extension cords should not be used

with this appliance.

14 DO NOT allow young children to

operate this appliance or use as a
toy. Close supervision is necessary
when any appliance is used near
children.

15 This appliance is not intended to be

used by people (including children)
with reduced physical, sensory,
or mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use of the
appliance by a person responsible
for their safety.

16 Before each use, inspect blade

assemblies for damage. If a blade
is bent or damage is suspected,
contact SharkNinja to arrange for
replacement.

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY

WARNING

To reduce the risk of injury, fire, electrical shock or property damage,

basic safety precautions must always be followed, including the following
numbered warnings and subsequent instructions�

SAVE THESE INSTRUCTIONS

5 6

ninjakitchen.com

17 DO NOT attempt to sharpen blades.

18 DO NOT allow the cord to hang

over the edges of tables or
counters. The cord may become
snagged and pull the appliance o
the work surface.

19 DO NOT allow the unit or the cord

to contact hot surfaces, including
stoves and other heating appliances.

20 ALWAY S use the appliance on a dry

and level surface.

21 NEVER place a blade assembly

on the motor base without it first
being attached to its corresponding
pitcher and lid.

22 Keep hands, hair, and clothing out

of the container when loading and
operating.

23 ONLY use attachments and

accessories that are provided with
the product or are recommended by
SharkNinja. The use of attachments
not recommended or sold by
SharkNinja may cause fire, electric
shock, or injury.

24 During operation and handling of

the appliance, avoid contact with
moving parts.

25 DO NOT operate the appliance with

an empty container.

26 DO NOT fill containers past the max

fill or max liquid lines.

27 DO NOT microwave any containers

or accessories provided with the
appliance.

28 Before operation, ensure all utensils

are removed from containers.
Failure to remove utensils can
cause containers to shatter and
potentially result in personal injury
and property damage.

29 Keep hands and utensils out of

container while blending to reduce
the risk of severe injury to persons
or damage to the blender. A scraper
or spatula may be used but must be
used ONLY when the blender is not
running.

30 NEVER operate the appliance

without lids and caps in place. DO
NOT attempt to defeat the interlock
mechanism. Ensure the container
and lid are properly installed before
operation.

SAVE THESE INSTRUCTIONS

31 DO NOT expose the containers and

accessories to extreme temperature
changes. They may experience
damage.

32 NEVER leave the appliance

unattended while in use.

33 DO NOT open pour spout cover

while blender is operating.

34 DO NOT blend hot liquids. Doing so

may result in a pressure buildup and
steam exposure that can pose a risk
of the user being burned.

35 If you find unmixed ingredients

sticking to the sides of the pitcher,
stop the appliance, remove the lid,
and use a scraper or spatula to
dislodge ingredients. NEVER insert
your hands into the pitcher, as you
may contact one of the blades and
experience a laceration.

36 DO NOT attempt to remove the

container and lid from the motor
base while the motor and Stacked
Blade Assembly are still spinning.
Allow the appliance to come to
a complete stop before removing
the lid and pitcher.

37 Upon completion of blending,

ensure the Stacked Blade Assembly
is removed BEFORE emptying
pitcher contents. The Stacked
Blade Assembly is to be removed
by grasping the top of the shaft
and lifting from the pitcher.
Failure to remove the Stacked
Blade Assembly before emptying
the pitcher can result in a risk of
laceration.

38 If the appliance overheats, a thermal

switch will activate and temporarily
disable the motor. To reset, unplug
the appliance and allow it to cool
for approximately 15 minutes before
using again.

39 The maximum wattage rating for

this appliance is based on the
configuration of the Stacked Blade
Assembly and Total Crushing®
Pitcher. Other configurations may
draw less power or current.

40 DO NOT spray the motor base or

touchscreen with water or other
liquids.

41 Turn o the appliance and unplug

the motor base before cleaning.

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY

WARNING

To reduce the risk of injury, fire, electrical shock or property damage,

basic safety precautions must always be followed, including the following
numbered warnings and subsequent instructions�

7 8

ninjakitchen.com

GETTING TO KNOW YOUR
NINJA® SMART SCREEN™ BLENDER

PARTS

WELCOME!

Congratulations on your purchase.
Use this Owner’s Guide to learn about
the great features of your Ninja Smart
Screen Blender. From assembly
to use to maintenance, you will find it
all in here.

A Pitcher Lid

B 72 oz.* Total Crushing® Pitcher

C Motor Base with Touchscreen

D Stacked Blade Assembly

To learn more about our products
and find great recipes, visit
ninjakitchen.com.

*64 oz. max liquid capacity.

A

B

C

D

DID YOU KNOW?

• The pitcher, Stacked Blade
Assembly, and lid are BPA free
and dishwasher safe.

9 10

ninjakitchen.com

FEATURES

MANUAL MODES:

HIGH & LOW

Use HIGH or LOW to blend
ingredients to your preferred
consistency. Once selected, these
functions will run continuously
until turned o. They will not run in
conjunction with pre-set programs.

PULSE
Use PULSE by pressing and releasing
the button to pulse ingredients to
your desired texture and consistency.

NOTE: For shorter pulses, press the
button for a short amount of time.

IMPORTANT:

Review all warnings on pages 3–6
before proceeding.

BEFORE FIRST USE

1 Remove all packaging materials from the unit. Exercise care when unpacking the

Stacked Blade Assembly as it is sharp.

2 Wash the pitcher, lid, and Stacked Blade Assembly in warm, soapy water using

a dishwashing utensil with a handle to avoid direct contact with the blades.
Exercise care when handling the Stacked Blade Assembly, as the blades are sharp.

3 Thoroughly rinse and air-dry all parts.

4 Wipe touchscreen with a soft cloth. Allow it to dry completely before using.

NOTE: The Stacked Blade Assembly is NOT locked in place in the pitcher. Handle the

Stacked Blade Assembly by grasping the top of the shaft.

NOTE: All attachments are dishwasher safe. It is recommended that the lid and

Stacked Blade Assembly be placed on the top rack of the dishwasher. Ensure the
Stacked Blade Assembly is removed from the pitcher before placing in the dishwasher.
Exercise care when handling the Stacked Blade Assembly.

INTUITIVE TOUCHSCREEN

The intuitive touchscreen features illuminated
controls that guide you through program selection
without all the guesswork.

  The power symbol should be used

to turn your appliance on or o.

AUTO-iQ® PROGRAMS:

Features intelligent programs that
combine unique pulsing, blending, and
pausing patterns that do the work for
you.

SMOOTHIE
Fresh/frozen fruits, milk/yogurt,
protein shakes

FROZEN DRINK
Margaritas, daiquiris, milkshakes

PUREE

Dips, sauces, spreads

ICE CREAM

Sorbet, sherbet, frozen yogurt

FROZEN DRINKSMOOTHIE

ICE CREAMPUREE

11 12

ninjakitchen.com

TIP: If the Stacked Blade Assembly is
not fully seated, you will not be able
to install and lock the lid into position.

NOTE: DO NOT add ingredients before
completing installation of the Stacked
Blade Assembly.

NOTE: The pitcher can be installed in
two dierent positions. The handle can
be positioned on the front-right corner
of the motor base or the front-left
corner of the motor base.

ASSEMBLING & USING YOUR
TOTAL CRUSHING® PITCHER

1 Plug in motor base and place on a

clean, dry, level surface such as a
countertop or table.

2 Lower the pitcher onto the motor

base, positioning it in a diamond
position, with the LOCK symbols
visible on the motor base.

3 To lock the pitcher in place,

rotate it to the left until you
hear a click.

4 Exercising care, grasp the Stacked

Blade Assembly by the top of the
shaft and place it onto the drive
gear inside the pitcher.

NOTE: The Stacked Blade Assembly
will fit loosely onto the drive gear.

5 Add ingredients, making sure to not

exceed the Max Fill line marked on
the side of the pitcher.

6 Place the lid on the pitcher, aligning

the triangle symbol located on the
lid with the triangle symbol located
on the pitcher’s handle. Press down
on the handle until you hear a click.

NOTE: The triangle symbols MUST

be aligned for the lid to lock into
place and the unit to operate.

13 14

ninjakitchen.com

AUTO-iQ® PROGRAMS

1 To begin, press the Power button.

2 Select one of the four pre-set

options that best suits your recipe.

NOTE: The pre-set feature will

automatically stop the unit at the
end of the program. To pause the
unit at any time, press the currently
active button a second time, or
press the Power button to cancel.

MANUAL MODES

1 To begin, press the Power button.

2 Choose the speed that best suits

your recipe.

NOTE: The PULSE setting will run

only when touched.

3 When you are done blending, press

the LOW or HIGH button again to
stop blending.

NOTE: The LOW and HIGH settings

will run continuously until they are
manually stopped.

TO SERVE YOUR RECIPE

1 Wait for the Stacked Blade Assembly

to come to a complete stop.

2 To remove the pitcher, turn the

handle to the right and lift it up.

NOTE: For thinner mixtures, ensure
the lid is locked into place, open the
pour spout cap on the lid, and empty
the contents of the pitcher through
the pour spout.

NOTE:

For thicker mixtures that
cannot be emptied through the pour
spout, remove the lid and Stacked
Blade Assembly before pouring. To
remove the lid, press the RELEASE
button on the lid and lift the handle.
The lid can then be removed from
the pitcher. To remove the Stacked
Blade Assembly, carefully grasp it
by the top of the shaft and remove
from the pitcher. The pitcher can
then be emptied.

MOVING YOUR BASE

1 When you are done blending,

unplug your unit.

2 To remove the base from the

counter, place your hands under
both sides of the base and lift it
up toward you.

ASSEMBLING & USING YOUR
TOTAL CRUSHING® PITCHER–CONT�

15 16

ninjakitchen.com

CARE &
MAINTENANCE

CLEANING

1 Separate all parts.

2 Hand-Washing

Wash the pitcher, lid, and Stacked
Blade Assembly in warm, soapy
water using a dishwashing utensil
with a handle to avoid direct contact
with the blades. Exercise care when
handling Stacked Blade Assembly
as the blades are sharp. Thoroughly
rinse and air-dry all parts.

Dishwasher

The pitcher, lid, and Stacked Blade
Assembly are dishwasher safe. It
is recommended that the lid and
Stacked Blade Assembly be placed
on the top rack of the dishwasher.
Ensure the Stacked Blade Assembly
is removed from the pitcher before
placing in the dishwasher.
Exercise care when handling
Stacked Blade Assembly.

Motor Base

Turn o the unit and unplug the
motor base before cleaning. Wipe
motor base with a clean, damp cloth.

Clean the touchscreen with a soft

cloth, such as microfiber, to prevent
scratching. To remove residue from
the touchscreen, you may use an all­purpose cleaner.

NOTE:

Never spray the base
or touchscreen with water or
other liquids.

NOTE:

DO NOT use abrasive cloths/

pads/brushes to clean the base
or touchscreen, as this can dull or
scratch the surface.

STORING

Store your unit upright with the
Stacked Blade Assembly inside the
pitcher and the lid secured on top.

NOTE:

DO NOT stack items on top

of the unit. Store any remaining
attachments alongside the unit or
in a cabinet where they will not be
damaged or create a hazard.

RESETTING THE MOTOR
THERMOSTAT

This unit features a unique safety
system that prevents damage to
the motor and drive system should
you inadvertently overload it. If the
unit is overloaded, the motor will be
temporarily disabled. Should this occur,
follow the reset procedure below.

1 Unplug the unit from the

electricaloutlet.

2 Allow the unit to cool for

approximately 15 minutes.

3 Remove the lid and Stacked

Blade Assembly from the pitcher.
Empty the pitcher and ensure no
ingredients are jamming the
Stacked Blade Assembly.

4

Re-install the pitcher onto the base
and plug the

unit

into the electrical

outlet.

5 Once the unit has been reset, you

may resume using it, making sure to
not exceed the maximum capacities.

IMPORTANT: Ensure that maximum

capacities are not exceeded. This is
the most typical cause of appliance
overload.

If your unit needs servicing,

please call Customer Service at
1-877-646-5288.

ORDERING REPLACEMENT PARTS

To order additional parts and
attachments, please visit
ninjaaccessories.com or contact
Customer Service at 1-877-646-5288.

TROUBLESHOOTING
GUIDE

WARNING: To reduce the risk of shock and unintended operation, turn
power o and unplug unit before troubleshooting�

Motor does not start or Stacked Blade Assembly does not rotate�

• Make sure the pitcher is securely placed on motor base.

• Make sure the lid is securely on the pitcher in the correct position (arrows aligned).

• If the unit is turned o, press the Power button to turn on.

• Check that the plug is securely inserted into the electrical outlet.

• Make sure the unit is not overloaded. If it is overloaded, it will stop and the

Power light will flash. Unplug and wait approximately 15 minutes before using again.

• If the unit has overheated, unplug and wait approximately 15 minutes before

using again.

You cannot create snow from ice�

• For best results, be sure the pitcher is thoroughly dried and use ice that is straight

from the freezer. Ice that has melted slightly is not ideal for creating snow.

You get an “--” message�

• The Total Crushing® Pitcher is not correctly assembled on the base with

the lid properly locked on. Once proper installation is complete, the available
programs will illuminate on the touchscreen.

Unable to turn o manual program�

• The LOW and HIGH settings will run continuously until they are manually

stopped.

• The PULSE setting will run only when touched.

The motor base won’t stick to the counter or tabletop�

• The suction feet will only stick to smooth, clean surfaces. Make sure the surface

and the suction feet are wiped clean before placing on counter or tabletop.

17 18ninjakitchen.com

ONE (1) YEAR
LIMITED WARRANTY

The 1-Year Limited Warranty applies to purchases made from a uthorized retailers of SharkNinja
Operatin g LLC. Warrant y coverage ap plies to the original owne r and to the orig inal product
only and is not transferable.

SharkNinja warrants that the unit shall be fre e from defects in material and workmanship for a
period of 1 yea r from the date of p urchase whe n it is used under norm al household conditions
and mainta ined according to the requirements outlined in this Owner ’s Guide, subject to the
following conditions and exclusions.

What is covered by my warranty?

1. The original unit and/or non-wearable components deemed defective, in SharkNinja’s sole
discretion , will be repaired or replaced for up to 1 year f rom the origi nal purchase date.

2. In the rare event that a re placement unit is issued, the wa rranty coverage ends 6 m onths
after the receipt date of the replaceme nt unit or the re mainde r of the existing warranty,
whichever is gre ater. If the unit is replaced, Sh arkNinja reserves the right to replace the
unit with one of e qual or greater value.

What is not covered by my warra nty?

Our Custom er Service/Product Specialists are available to provide all the warranty ser vice
options availa ble to you, including the p ossibilit y of upgrad ing to our VIP War ranty Se rvice
Options for select product categ ories.

1. Normal wear an d tear of wearable parts (including all ble nding vessels, lids , blades, and
blender base) which require regular maintenance a nd/or replacement to ensure the
proper functioning of your unit are n ot covered by this warranty.

2. Any unit that has be en tampered with or used for commercial purposes.

3. SharkNinja will cover the cost for the custome r to send the un it to us for repair o r
replacem ent. A fee of $ 19.95 for return shipping cost s will be charg ed at the time of
return shipm ent of the repaired or replacement unit.

4. Damage caused by misuse, abuse, or negligent handling, or damage due to mishandling
in transit.

5. Consequential and incidental damages.

6. Defec ts caused by or resulting from damages from shipping or from repairs , service, or
alteration to the p roduct or a ny of its parts that have bee n performed by a repair person
not authorized by SharkNinja.

7. Products purchased , used, or operated outside of North Ame rica.

Proble ms with your unit/How to get service:

If your appliance fails to operate properly while in use under normal household co nditions
within the warr anty per iod, visit ninjakitche n.com for p roduct care/maintenance self-he lp. Our
Customer S ervice a nd Produc t Specialists are also available at 1 -877- 646 -5288 to assist with
product support and warranty service options.

How to init iate a war ranty cl aim:

You can call 1- 877-6 46-5288 to have a Customer Ser vice Spe cialist assist you. Please note, you
must call 1 -877- 646 -528 8 to initiate a warranty claim . Return and Packing In structio n information
will be provided at that time.

For Custome r Service hours, visit ninjakitchen.com.

Replacement parts are available for purchase at ninjaaccessories.com. For more information on
what are classified as wearable and non-wearable parts, visit ninjakitchen.com/warranty.

This warranty gives you specific legal rights , and you may also have other right s that vary from
state to state or province to province.

Some states o r provinces do n ot permit th e exclusion or li mitation of in cidental or consequential
damages, so the above may not apply to you.

TROUBLESHOOTING
GUIDE – CONT�

Why doesn’t my blender turn o?

• Press selected program to pause operation, or press power button to cancel

selected program. When blades have completely stopped spinning, remove the
pitcher from base by rotating it counterclockwise and lifting it up. Once the
pitcher is removed from the base, unplug the power cord from the outlet.

The lid seems to be on, but the programs will not run—what am I doing wrong?

• Place the lid on the pitcher, aligning the triangle symbol located on the lid with

the triangle symbol located on the pitcher’s handle. Press down on the handle
until you hear a click. The triangle symbols MUST be aligned for the lid to lock
into place and the unit to operate.

Why does my blender sometimes count up and other times count down?

• AUTO-iQ® programs are timed to finish on their own when the program is complete,

so the clock counts down until the program is finished. When using a Manual mode
(low or high) the clock will count up from 0 until the auto shuto is reached. or the
button for the currently running mode is selected again.

WARNING: To reduce the risk of shock and unintended operation, turn
power o and unplug unit before troubleshooting�

@ninjakitchen

SharkNinja Operating LLC
US: Needham, MA 02494
1-877-646-5288
ninjakitchen�com

Illustrations may dier from actual product. We are constantly striving to improve
our products, therefore the specifications contained herein are subject to change
withoutnotice.

AUTO-IQ, NINJA, and TOTAL CRUSHING are registered trademarks of
SharkNinja Operating LLC.

SMART SCREEN is a trademark of SharkNinja Operating LLC.

For SharkNinja U.S. Patent information, visit sharkninja.com/uspatents.

© 2018 SharkNinja Operating LLC
CT650�Series�IB�MP�Mv1

PRINTED IN CHINA