Ninja NN310, NN310A Owner's Manual

Page 1
Precision Processor™ with Auto-Spiralizer
Series
INSTRUCTIONS
®
ninjakitchen.com
1-877-646-5288
Page 2
THANK YOU
for purchasing the Ninja® Precision Processor™ with Auto-Spiralizer™
CONTENTS
ENGLISH
TIP: You can find the model and serial numbers on the QR code label which is located on the back of the motor base.
REGISTER YOUR PURCHASE
registeryourninja.com
1-877-646-5288
Scan QR code using mobile device
RECORD THIS INFORMATION
Model Number: ��������������������������������������
Serial Number: ��������������������������������������
Date of Purchase (Keep receipt): �����������������������
Store of Purchase: �����������������������������������
TECHNICAL SPECIFICATIONS
Voltage: 120V, 60Hz
Watts: 400W
Important Safety Instructions � � � � � � � � � � � � � � � � � � � � � � � � � � � 3
Before First Use � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6
Getting to Know Your Precision Processor with Auto-Spiralizer™ � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7
Using Your Precision Processor Bowl � � � � � � � � � � � � � � � � � � � � 9
Assembling Your Auto-Spiralizer � � � � � � � � � � � � � � � � � � � � � � � 13
Using Your Auto-Spiralizer � � � � � � � � � � � � � � � � � � � � � � � � � � � � 15
Care & Maintenance � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 19
Cleaning � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 19 Storing � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 19 Resetting the Motor Thermostat � � � � � � � � � � � � � � � � � � � � � � � � � � �19 Ordering Replacement Parts � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �19
Troubleshooting Guide � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 20
Warranty � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 22
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE�
These instructions are designed to help youget a complete understanding of your newNinja Precision
Processor with Auto-Spiralizer.
If you have any questions, please call our customer service line at 1-877-646-5288.
1 21- 877-646-5288 ninjakitchen.com
Page 3
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
When using electrical appliances, basic safety precautions should always be
followed, including the following:
ENGLISH
1 Read all instructions prior to using the
appliance and its accessories.
2 Carefully observe and follow all warnings
and instructions. This unit contains electrical connections and moving parts that potentially present risk to the user.
3 This product is provided with a Chopping
Blade Assembly. Always exercise care when handling blade assemblies. The blade assemblies are sharp and are NOT locked in place in their containers. The blade assemblies are designed to be removable to facilitate cleaning and replacement if needed. ONLY grasp the blade assembly by the top of the shaft. Failure to use care when handling the blade assemblies will result in a risk of laceration.
4 Take your time and exercise care during
unpacking and appliance setup. This appliance contains sharp, loose blades that can cause injury if mishandled.
5 Take inventory of all contents to ensure
you have all parts needed to properly and safely operate your appliance.
6 Unplug the appliance from the outlet
when not in use, before assembling or disassembling parts, and before cleaning. To unplug, grasp the plug by the body and pull from the outlet. Never unplug by grasping and pulling the flexible cord.
7 Before use, wash all parts that may come
in contact with food. Follow washing instructions covered in this instruction manual.
8 To protect against the risk of electric
shock, DO NOT submerge the appliance or allow the power cord to contact any form of liquid.
9 DO NOT use this appliance outdoors. It is
designed for indoor household use only.
10 This appliance has a polarized plug (one
blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT modify the plug in any way.
11 DO NOT operate any appliance with
a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner. This appliance has important markings on the plug blade. The entire cordset is not suitable for replacement. If damaged, please contact SharkNinja LLC for service.
12 Extension cords should NOT be used with
this appliance.
13 DO NOT allow young children to operate
this appliance or use as a toy. Close supervision is necessary when any appliance is used near children.
14 This appliance is NOT intended to be used
by people (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
15 Before each use, inspect blade assemblies
for damage. If a blade is bent or damage is suspected, contact SharkNinja to arrange for replacement.
16 DO NOT attempt to sharpen blades.
17 DO NOT allow the cord to hang over the
edges of tables or counters. The cord may become snagged and pull the appliance off the work surface.
18 DO NOT allow the unit or the cord to
contact hot surfaces, including stoves and other heating appliances.
19 ALWAYS use the appliance on a dry and
level surface.
20 NEVER place a blade assembly on the
motor base without it first being attached to its corresponding bowl and lid.
21 Keep hands, hair, and clothing out of the
container when loading and operating.
22 ONLY use attachments and accessories
that are provided with the product or are recommended by SharkNinja. The use of attachments not recommended or sold by SharkNinja may cause fire, electric shock, or injury.
23 During operation and handling of the
appliance, avoid contact with moving parts.
24 DO NOT operate the appliance with an
empty container.
25 DO NOT fill containers past the max fill or
max liquid lines.
26 DO NOT microwave any containers or
accessories provided with the appliance.
27 Before operation, ensure all utensils are
removed from containers. Failure to remove utensils can cause containers to shatter and potentially result in personal injury and property damage.
28 Keep hands and utensils out of containers
while in use to reduce the risk of severe personal injury or damage to the unit. A scraper may ONLY be used when the unit is not running.
29 NEVER operate the appliance without lids
and caps in place. DO NOT attempt to defeat the interlock mechanism. Ensure the container and lid are properly installed before operation.
30 DO NOT expose the containers and
accessories to extreme temperature changes. They may experience damage.
31 NEVER leave the appliance unattended
while in use.
32 DO NOT blend hot liquids. Doing so may
result in a pressure buildup and steam exposure that can pose a risk of the user being burned.
CONTINUED ON PAGE 5
SAVE THESE INSTRUCTIONS
3 41-877-646-5288 ninjakitchen.com
Page 4
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
BEFORE FIRST USE
ENGLISH
WARNING
When using electrical appliances, basic safety precautions should always be
followed, including the following:
33 DO NOT attempt to remove the container
or lids from the motor base while blade
assembly is still spinning. Allow the appliance to come to a complete stop before removing lid and container.
34 Upon completion of processing, ensure
the blade assembly is removed BEFORE emptying container’s contents. Remove the blade assembly by carefully grasping the top of the shaft and lifting it from the container. Failure to remove the blade assembly before emptying the container
will result in a risk of laceration.
35 If the appliance overheats, a thermal switch
will activate and temporarily disable the motor. To reset, unplug the appliance and allow it to cool for approximately 15 minutes before using again.
36 The maximum wattage rating for this
appliance is based on the configuration of the Dough Blade Assembly and Precision Processor™ Bowl. Other configurations may draw less power or current.
37 The Blade Discs are sharp. Always use the
handles on the side of each Blade Disc when placing it into the bowl or removing it. Follow all cleaning instructions. Failure to do so will result in a risk of laceration.
38 When using the Spiralizer, ALWAYS use
the Food Pusher. NEVER feed ingredients into the Spiralizer by hand or with other utensils. Failure to use the Food Pusher may cause personal injury.
39 If Blade Discs appear to be damaged or
broken, do not use or attempt to repair. Call customer service for assistance.
40 DO NOT attempt to sharpen Blade Discs.
41 DO NOT remove Feed Chute Lid until
Blade Disc stops spinning.
IMPORTANT: Review all warnings on pages 3–5 before proceeding.
DID YOU KNOW?
• All containers and lids are BPA free.
All blades, containers and lids are top-rack dishwasher safe.
1 Remove all packaging materials from the appliance.
Exercise care when unpacking blade assemblies and Blade Discs. All blade assemblies and Blade Discs are sharp.
NOT
2 The Chopping Blade Assembly is
its container. Handle the Chopping Blade Assembly by grasping the top of the shaft.
3 Wash containers, lids, Blade Discs, and blade assemblies
in warm, soapy water, using a dishwashing utensil with a handle or the provided cleaning brush to avoid direct contact with the blades. Exercise care when handling blade assemblies, as the blades are sharp.
4 Thoroughly rinse and air-dry all parts.
5 All attachments are dishwasher safe. It is recommended
that the lids, Blade Discs, and blade assemblies be placed on the top rack of the dishwasher. Ensure blade assemblies and Blade Discs are removed from their containers before placing in the dishwasher. Exercise care when handling blade assemblies and Blade Discs.
6 Wipe the motor base with a clean, damp cloth.
locked in place in
SAVE THESE INSTRUCTIONS
5 61-877- 64 6-528 8 ninjakitchen.com
Page 5
GETTING TO KNOW YOUR
PRECISION PROCESSOR™ WITH AUTO-SPIRALIZER
WELCOME!
Congratulations on your purchase. Use this instruction manual to learn about the great features of your Ninja. From assembly to use to maintenance, you will find it all in here.
ENGLISH
A F
J
There are a variety of accessories that are compatible with this series.
NOTE:
The top flap of your box shows the select accessories that are included with your model�
If you have any questions,
concerns, or feedback, we’d
love to hear from you. Give us a call at 1-877-646-5288 or visit ninjakitchen.com/ customersupport
To purchase more accessories and to find great recipes, visit ninjakitchen.com
* 3.5 cups max capacity/
15 oz. max liquid capacity.
MAIN UNIT
A Motor Base
B Precision Processor Bowl Lid
C Chopping Blade Assembly
D Dough Blade Assembly
E Precision Processor Bowl*
F Food Pusher
G Feed Chute Lid
H Collecting Bowl
I Spiralizer Bowl
J Spaghetti Blade Disc
K Fettuccine Blade Disc
L Cleaning Brush
B
C
D
E
G
H
I
K
L
7 81-877-646-5288 ninjakitchen.com
Page 6
USING YOUR PRECISION PROCESSOR™ BOWL
IMPORTANT: Review all
warnings on pages 3–5 before proceeding.
TIP: If the blade assembly is not fully seated, you will not be able to install and lock the lid into position.
NOTE:
ingredients before installing the blade assembly.
NOTE: For best results,
follow recipe loading instructions.
TIP: For best results when processing hard or tough ingredients such as raw meat, baking chocolate, or hard cheese in the Precision Processor bowl, cut ingredients into 1” cubes and process no more than 1 cup at a time.
DO NOT
add
1
Place the unplugged motor base on a clean, dry, and level surface such as a countertop or table. Press downward on the motor base to adhere the suction cups to the work surface. Ensure the motor base is connected to power.
2 Lower the Precision
Processor Bowl onto the motor base.
3 Rotate Precision
Processor™ Bowl clockwise until it clicks into place.
4 Exercising care, grasp the
Chopping Blade Assembly
by the top of the shaft and place it onto the drive gear inside the bowl. Note that the Chopping Blade Assembly will fit loosely onto the drive gear.
ENGLISH
5 Add ingredients to the
bowl, making sure not to exceed the max liquid and max fill lines.
9 101- 877-646-5288 ninjakitchen.com
Page 7
USING YOUR PRECISION PROCESSOR™ BOWL - CONT�
IMPORTANT: Review all
warnings on pages 3–5 before proceeding.
NOTE: Please follow the same
assembly instructions for the
Dough Blade Assembly.
6 Place lid on Precision
Processor Bowl, with
silver line on tab aligned
slightly to the right of tab on front of bowl. Turn lid clockwise to lock in place. When properly locked, the silver line on lid will line up with the silver line on bowl. When the unit is connected to power and the container is correctly locked into the motor base, the program buttons will illuminate and the unit will be ready for use.
7 Press START/STOP to run
continuously or PULSE to pulse the blade assembly.
8 To remove the bowl from
the motor base, turn the bowl counterclockwise and then lift it up.
9 Remove the lid by pressing
the release button on the front tab, twisting the lid counterclockwise, and lifting up. Always remove the Chopping Blade Assembly before emptying any of the ingredients in the bowl. To remove the Chopping Blade Assembly, carefully grasp it by the top of the shaft and lift it out of the bowl.
ENGLISH
10 Unplug the appliance
when finished. To release the motor base, gently pull the unit up and toward you. Refer to page 19 for storing instructions.
11 121- 877-646-5288 ninjakitchen.com
Page 8
ASSEMBLING YOUR AUTO-SPIRALIZER
IMPORTANT: Review all
warnings on pages 3–5 before proceeding.
IMPORTANT: As a safety feature, if the Spiralizer Bowl and Feed Chute Lid are not properly installed, the unit will not power on and the motor will be disabled.
1 Place the unplugged
motor base on a clean, dry, and level surface such as a countertop or table. Press downward on the motor to adhere the suction cups to the work surface. Ensure the motor base is connected to power.
2 Lower the Spiralizer Bowl
onto the motor base.
3 Rotate the Spiralizer Bowl
clockwise until it clicks into place.
4 Place the Collecting Bowl inside the
Spiralizer Bowl, aligning it over the gear post.
5 Choose your Blade Disc, making sure to
handle it carefully.
6 Install the Blade Disc onto the top of the
Collecting Bowl. The rim of the Blade Disc should sit flush against the top of the bowl, and the tabs on the sides of the Blade Discs must align with the slots on the top of the Collecting Bowl.
ENGLISH
7 Assemble the Feed Chute Lid on top of the
Spiralizer Bowl. Turn the lid clockwise onto the Spiralizer Bowl, making sure to align the gray tabs on the lid with the front of the bowl. When the unit is connected to power and the container is correctly assembled, the START/STOP button will illuminate, indicating the unit is ready for use.
13 141-87 7-646 -5288 ninjakitchen.com
Page 9
USING YOUR AUTO-SPIRALIZER
IMPORTANT: Review all
warnings on pages 3–5 before proceeding.
NOTE: To find out how to properly prep your ingredient, refer to the Food Prep section in your Quick Start Guide or your Inspiration Guide.
NOTE:
multiple ingredients at one time.
NOTE: The Auto­Spiralizer is only intended for processing fruit and vegetables. Processing hard ingredients such as cheese, meats, and dried foods is not recommended.
NEVER
Spiralize
ENGLISH
1 Before spiralizing, prepare
your ingredient by trimming it so it is no more than 3” wide. Place the prepped ingredient into the Feed Chute, through the opening at the top.
15 161 -877-646-528 8 ninjakitchen.com
2 Center the ingredient
on the pin in the center of the Blade Disc, then push down, securing the ingredient on the pin.
3 Place Food Pusher on top
of ingredient and press down firmly to hold in place.
4 Select START/STOP to
begin spiralizing. Continue to press firmly with Food Pusher to guide ingredient through Feed Chute.
5 Spiralizing is complete
when the Food Pusher sits flat atop the Feed Chute Lid. Press START/STOP to power off the motor.
After spiralizing an ingredient, all leftover pieces must be removed from the Collecting Bowl and Blade Disc before spiralizing again.
Page 10
USING YOUR AUTO-SPIRALIZER™ - CONT�
IMPORTANT: Review all
warnings on pages 3–5 before proceeding.
ENGLISH
6 To remove the Spiralizer
Bowl from the motor base, turn the bowl counterclockwise and liftup.
17 181-877-646-5288 ninjakitchen.com
7
To remove the Feed Chute Lid, press the release button on the left side of the front tab, then twist the lid counterclockwise and lift up.
8 Remove the Collecting
Bowl by lifting it up and out of the Spiralizer Bowl. Remove the Blade Disc by gripping the handles on the side of the disc and liftingup.
9 Remove the noodles from
the Collecting Bowl and prepare as desired.
10 Unplug the unit when
finished. To release the motor base, gently pull it toward you. Refer to page 19 for storing instructions.
Page 11
CARE & MAINTENANCE
TROUBLESHOOTING GUIDE
ENGLISH
CLEANING
1 Separate all parts.
2 Hand Washing
Wash containers, lids, blade assemblies and Blade Discs in warm, soapy water using a dishwashing utensil with a handle or the provided cleaning brush to avoid direct contact with the blades. Exercise care when handling blade assemblies, as the blades are sharp. Thoroughly rinse and air-dry all parts.
Dishwasher
All attachments are dishwasher safe. It is recommended that the lids, containers, blade
assemblies, and Blade Discs be placed on
the top rack of the dishwasher
ONLY
. Ensure that blade assemblies and Blade Discs are removed from their containers before placing in the dishwasher. Exercise care when handling blade assemblies.
3 Wipe the motor base with a clean, damp
cloth. Allow to dry completely before operation.
STORING
Wrap the power cord around the back of the motor base. Store the unit upright and store all blade assemblies inside or attached to their respective containers with their lids locked in place.
DO NOT
stack items on top of the containers. Store any remaining attachments alongside the unit or in a cabinet where they will not be damaged or create a hazard.
RESETTING THE MOTOR THERMOSTAT
This unit features a unique safety system that prevents damage to the motor and drive system should you inadvertently overload the
unit. If the unit is overloaded, the motor will be
temporarily disabled. Should this occur, follow the reset procedure below.
1 Unplug the unit from the electricaloutlet.
2 Allow the unit to cool for approximately 15
minutes.
3
Remove the container lid and blade assembly. Empty the container and ensure no ingredients
are jamming the blade assemblies.
4 Reset the unit in accordance with the
applicable instructions for the container and blade type.
IMPORTANT: Ensure that maximum
capacities are not exceeded. This is the most typical cause of unit overload.
If your unit needs servicing, please call
Customer Service at 1-877-646-5288.
ORDERING REPLACEMENT PARTS
To order additional parts and attachments, please visit ninjakitchen.com or contact customer service at 1-877-646-5288.
WARNING: To reduce the risk of shock and unintended operation, turn power o and unplug unit before troubleshooting�
Unit doesn’t turn on�
Make sure unit is plugged in.
Insert and rotate container clockwise on base until it clicks. Programs will illuminate, indicating your unit is
ready for use.
Unit doesn’t turn o�
Remove container from base by rotating it counterclockwise and lifting it up. Display should turn off. Unplug the power cord from the outlet.
Ingredients are not evenly chopped�
For best results when chopping, cut pieces down to even sizes and do no overfill the Precision Processor Bowl.
Motor base won’t stick to counter or tabletop�
Make sure surface and suction feet are wiped clean. Suction feet will only stick to smooth surfaces.
Suction feet
DO NOT
board, platter, plate, etc.).
Unit is dicult to remove from counter for storage�
The suction feet at the base of the unit provide stability when in use. To release suction, gently pull the unit
toward you.
You get semi-circular or shredded noodles�
If the Collecting Bowl is overfilled, causing the Blade Disc to lift up after Spiralizing, your ingredient may have been too large. Make sure to trim and prepare your ingredients properly before spiralizing by following the instructions in the Food Prep section of your Quick Start Guide or Inspiration Guide.
For the most consistent results, be sure to center the ingredient on the pin located in the center of the Blade Disc. (Refer to page 15, step 2.)
Ingredient is not fully processed and is spinning on the pusher�
Remove remaining ingredient from Blade Disc pin and trim top and bottom so that both are flat. Make sure you center ingredient on the Blade Disc pin and secure the Food Pusher firmly on top of the ingredient. While maintaining pressure on Food Pusher, press the START/STOP button.
Unit turned o while in use�
As a safety feature to prevent damage to the motor and drive system, the unit will power off after a continuous run of 45 seconds.
will not
stick on some surfaces such as wood, tile, and non-polished finishes.
attempt to use appliance when the motor base is stuck to a surface that is not secure (cutting
19 201- 877-646-5288 ninjakitchen.com
Page 12
NOTES
ONE (1) YEAR LIMITED WARRANTY
ENGLISH
The 1-Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of 1 year from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in this instruction manual, subject to the following conditions and exclusions.
What is covered by my warranty?
1. The original unit and/or non-wearable components deemed defective, in SharkNinja’s sole discretion,
will be repaired or replaced for up to 1 year from the original purchase date.
2. In the rare event that a replacement unit is issued, the warranty coverage ends six months after the
receipt date of the replacement unit or the remainder of the existing warranty, whichever is greater. If the unit is replaced, SharkNinja reserves the right to replace the unit with one of equal or greater value.
What is not covered by my warranty?
Our Customer Service/Product Specialists are available to provide all the warranty service options available to you, including the possibility of upgrading to our VIP Warranty Service Options for select product categories.
1. Normal wear and tear of wearable parts (including all blending vessels, lids, blades and blender base)
which require regular maintenance and/or replacement to ensure the proper functioning of your unit are not covered by this warranty.
2. Any unit that has been tampered with or used for commercial purposes.
3. SharkNinja will cover the cost for the customer to send the unit to us for repair or replacement. A fee
of $19.95 for return shipping costs will be charged at the time of return shipment of the repaired or replacement unit.
4. Damage caused by misuse, abuse, or negligent handling, or damage due to mishandling in transit.
5. Consequential and incidental damages.
6. Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the
product or any of its parts which have been performed by a repair person not authorized by SharkNinja.
7. Products purchased, used or operated outside of North America.
Problems with your unit/How to get service:
If your appliance fails to operate properly while in use under normal household conditions within the warranty period, visit ninjakitchen.com for product care/maintenance self-help. Our Customer Service and product specialists are also available at 1-877-646-5288 to assist with product support and warranty service options.
How to initiate a warranty claim:
You can call 1-877-646-5288 to have a Customer Service specialist assist you. Please note, you must call 1-877-646-5288 to initiate a warranty claim. Return and Packing Instruction information will be provided at that time.
Replacement parts are available for purchase at ninjakitchen.com. For more information on which parts are classified as wearable and non-wearable, please visit ninjakitchen.com/warranty
This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.
Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.
21 221- 877-646-5288 ninjakitchen.com
Page 13
SharkNinja Operating LLC US: Newton, MA 02459 CAN: Ville St-Laurent, QC H4S 1A7 1-877-646-5288 ninjakitchen�com
Illustrations may differ from actual product. We are constantly striving to improve our products; therefore the specifications contained herein are subject to change withoutnotice.
NINJA is a registered trademark of SharkNinja Operating LLC.
AUTO-SPIR ALIZER and PRECISION PROCESSOR are trademarks of SharkNinja Operating LLC.
For SharkNinja U.S. Patent information visit sharkninja.com/USPatents
© 2017 SharkNinja Operating LLC NN310�E�IB�170519�MP
PRINTED IN CHINA
@ninjakitchen
Loading...