Ninja NN210Q Owner's Manual

Download

Page 1

4-IN-1 KITCHEN SYSTEM™

NN210Q

Model

INSTRUCTIONS

ninjakitchen.com

1-877-646-5288

Page 2

THANK YOU

for purchasing the Ninja® 4-in-1 Kitchen System™

registeryourninja.com

1-877-646-5288

TIP: You can locate the model number and date code on the plug prong.

RECORD THIS INFORMATION

Model Number: ��

Date Code: ��

Date of Purchase (Keep receipt): ��

TECHNICAL SPECIFICATIONS

Voltage: 120V, 60Hz

Watts: 1200W

PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.

These instructions are designed to help youget a complete understanding of your newNinja 4-in-1 Kitchen System.

1 1- 877-646-5288

If you have any questions, please call our customer service line at 1-877-646-5288.

Page 3

CONTENTS

Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Getting to Know Your Ninja® 4-in-1 Kitchen System™ . . . . . . . 7

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Before First Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Using Your High-Speed Blender Cup . . . . . . . . . . . . . . . . . . . . . 11

Using Your Precision Processor™ Bowl . . . . . . . . . . . . . . . . . . 15

Assembling Your Auto-Spiralizer™ . . . . . . . . . . . . . . . . . . . . . . 19

Using Your Auto-Spiralizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Using Your Total Crushing® Blender Pitcher . . . . . . . . . . . . . . 25

Suggested Uses & Filling Instructions . . . . . . . . . . . . . . . . . . . 29

Filling Your High-Speed Blender Cup. . . . . . . . . . . . . . . . . . . . . . 29

Ordering Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Care & Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Storing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Resetting the Motor Thermostat . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

2ninjakitchen.com

Page 4

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY

WARNING

When using electrical appliances, basic safety precautions should always be

followed, including the following:

1 Read all instructions prior to using the

appliance and its accessories.

2 Carefully observe and follow all warnings

and instructions. This unit contains electrical connections and moving parts that potentially present risk to the user.

3 This product is provided with a Stacked

Blade Assembly and a Chopping Blade Assembly. Always exercise care when handling blade assemblies. The blade assemblies are sharp and are NOT locked in place in their containers. The blade assemblies are designed to be removable to facilitate cleaning and replacement if needed. ONLY grasp the blade assembly by the top of the shaft. Failure to use care when handling the blade assemblies will result in a risk of laceration.

4 ALWAYS exercise care when handling

the Pro Extractor Blades® Assembly. The blades are sharp. ONLY grasp the Pro Extractor Blades Assembly by the outer perimeter of the blade assembly base. Failure to use care when handling the blade assembly will result in a risk of laceration.

5 Take your time and exercise care during

unpacking and appliance setup. This appliance contains sharp, loose blades that can cause injury if mishandled.

6 Take inventory of all contents to ensure that

you have all parts needed to properly and safely operate your appliance.

7 Unplug the appliance from the outlet

when not in use, before assembling or disassembling parts, and before cleaning. To unplug, grasp the plug by the body and pull from the outlet. Never unplug by grasping and pulling the ﬂexible cord.

8 Before use, wash all parts that may

come in contact with food. Follow washing instructions covered in this instructionmanual.

9 To protect against the risk of electric shock,

DO NOT submerge the appliance or allow the power cord to contact any form of liquid.

10 DO NOT use this appliance outdoors. It is

designed for indoor household use only.

3 1- 877-646-5288

Page 5

11 This appliance has a polarized plug (one

blade is wider than the other). To reduce the risk of electric shock, this plug will ﬁt in a polarized outlet only one way. If the plug does not ﬁt fully in the outlet, reverse the plug. If it still does not ﬁt, contact a qualiﬁed electrician. DO NOT modify the plug in any way.

12 DO NOT operate any appliance with

a damaged cord or plug, or after the appliance malfunctions, or has been dropped or damaged in any manner. This appliance has important information on the plug prong. The entire cord set is NOT suitable for replacement. If damaged, please contact SharkNinja LLC for service.

13 Extension cords should NOT be used with

this appliance.

14 DO NOT allow young children to operate

this appliance or use as a toy. Close supervision is necessary when any appliance is used near children.

15 This appliance is NOT intended to be used

by people (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

16 Before each use, inspect blade assemblies

for damage. If a blade is bent or damage is suspected, contact SharkNinja to arrange for replacement.

17 DO NOT attempt to sharpen blades.

18 DO NOT allow the cord to hang over the

edges of tables or counters. The cord may become snagged and pull the appliance off the work surface.

19 DO NOT allow any part of the unit or cord

to contact hot surfaces, including stoves and other heating appliances.

20 ALWAYS use the appliance on a dry and

level surface.

21 NEVER place a blade assembly on the

motor base without it ﬁrst being attached to its corresponding container (bowl, pitcher, cup) and lid.

CONTINUED ON PAGE 5

SAVE THESE INSTRUCTIONS

4ninjakitchen.com

Page 6

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY

WARNING

When using electrical appliances, basic safety precautions should always be

followed, including the following:

22 Keep hands, hair, and clothing out of the

container when loading and operating.

23 ONLY use attachments and accessories

that are provided with the product or are recommended by SharkNinja.

24 During operation and handling of the

appliance, avoid contact with moving parts.

25 DO NOT operate the appliance with an

empty container.

26 DO NOT ﬁll containers past the max ﬁll or

max liquid lines.

27 DO NOT microwave any containers or

accessories provided with the appliance.

28 DO NOT perform grinding operations with

the High-Speed Blender Cup and Pro Extractor Blades® Assembly.

29 Before operation, ensure that all utensils

are removed from containers. Failure to remove utensils can cause containers to shatter and potentially result in personal injury and property damage.

Keep hands and utensils out of containers while chopping to reduce the risk of severe personal injury or damage to the blender/ food chopper. A scraper may ONLY be used when the food chopper is not running.

31 NEVER operate the appliance without lids

and caps in place. DO NOT attempt to defeat the interlock mechanism. Ensure that the container and lid are properly installed before operation.

32 DO NOT expose the containers and

accessories to extreme temperature changes. They may experience damage.

33 NEVER leave the appliance unattended

while in use.

34 DO NOT open pour spout cover while

blender is operating.

DO NOT blend hot liquids. Doing so may result in a pressure buildup and steam exposure that can pose a risk of the user being burned.

If you ﬁnd unmixed ingredients sticking to the sides of the pitcher, stop the appliance, remove the lid, and use a spatula to dislodge ingredients. NEVER insert your hands into the pitcher, as you may contact one of the blades and experience a laceration.

37 DO NOT attempt to remove the container

and lids from the motor base while the blade assembly is still spinning. Allow the appliance to come to a complete stop before removing lids and containers.

5 1- 877-646-5288

Page 7

38 Upon completion of processing, ensure

that the blade assembly is removed BEFORE emptying container’s contents. Remove the blade assembly by carefully grasping the top of the shaft and lifting it from the container. Failure to remove the blade assembly before emptying the container results in a risk of laceration.

39 Remove the Pro Extractor Blades®

Assembly from the High-Speed Blender cup upon completion of blending. DO NOT store ingredients before or after blending them in the cup with the blade assembly attached. Some foods may contain active ingredients or release gases that will expand if left in a sealed container, resulting in excessive pressure buildup that can pose a risk of injury. For ingredient storage in the cup, use only Spout Lid to cover.

40 If the appliance overheats, a thermal switch

will activate and temporarily disable the motor. To reset, unplug the appliance and allow it to cool for approximately 15 minutes before using again.

41 The maximum wattage rating for this

appliance is based on the conﬁguration of the Pro Extractor Blades Assembly and High-Speed Blender cup. Other conﬁgurations may draw less power or current.

42 DO NOT process dry ingredients without

adding liquid to the High-Speed Blender cup. The High-Speed Blender cup is not intended for dry blending.

43 The Blade Discs are sharp. Always use the

handles on the side of each Blade Disc when placing it into the Bowl or removing it. Follow all cleaning instructions. Failure to do so will result in a risk of laceration.

44 When using the Spiralizer, ALWAYS use

the Food Pusher. NEVER feed ingredients into the Spiralizer by hand or with other utensils. Failure to use the Food Pusher may cause personal injury.

45 If Blade Discs appear to be damaged or

broken, do not use or attempt to repair. Call customer service for assistance.

46 DO NOT attempt to sharpen Blade Discs.

47 DO NOT remove Feed Chute Lid until

Blade Disc stops spinning.

SAVE THESE INSTRUCTIONS

6ninjakitchen.com

Page 8

GETTING TO KNOW YOUR NINJA® 4-IN-1 KITCHEN SYSTEM™

WELCOME!

Congratulations on your purchase. Use this instruction manual to learn about the great features of your Ninja 4-in-1 Kitchen System. From assembly to use to maintenance, you will ﬁnd it all in here.

There are a variety of accessories that are compatible with this blenderseries.

NOTE:

The top ﬂap of your box shows the select accessories that are included with your model.

If you have any questions, concerns or feedback, we’d love to hear from you. Give us a call at 1-877-646-5288 or visit ninjakitchen.com/ customersupport

To ﬁnd great recipes and purchase more accessories (including more Blade Discs for creating different types of noodles) please visit ninjaaccessories.com

* 3.5 cups max capacity,

15 oz. max liquid capacity.

** 64 oz. max liquid capacity.

MAIN UNIT

A Spout Lid

B Pro Extractor Blades® Assembly

C 24 oz. High-Speed Blender Cup

D Motor Base

E Precision Processor™ Bowl Lid

F Precision Processor Bowl*

G Dough Blade Assembly

H Chopping Blade Assembly

I Pitcher Lid

J 72 oz. Total Crushing® Blender Pitcher**

K Stacked Blade Assembly

L Cleaning Brush

M Spaghetti Blade Disc

N Angel Hair Blade Disc

O Ribbon Blade Disc

P Pappardelle Blade Disc

Q Fettuccine Blade Disc

R Storage Box

S Food Pusher

T Feed Chute Lid

U Collecting Bowl

V Spiralizer Bowl

7 1- 877-646-5288

Page 9

G H

MIX

FROZEN

DRINK

8ninjakitchen.com

Page 10

FEATURES

IMPORTANT: Review all

warnings on pages 3–6 before proceeding.

DID YOU KNOW?

• You can take your drinks

on the go using the Spout Lids.

• All containers, blade

assemblies, Blade Discs, and lids are BPA free.

• Our blades, containers and

lids are all dishwasher safe.

FROZEN

DRINK

START | STOP Press once to start running continuously, press again to stop. Timer counts up to 60 seconds. This button can be pressed at any time if you wish to stop the program.

PULSE

Offers greater control of pulsing and blending. Operates only when the PULSE button is pressed. Press and release quickly for short pulses.

Auto-iQ BOOST™ Control the consistency of your recipe by selecting BOOST YES or NO prior to selecting your Auto-iQ® program. The BOOST button toggles between YES and NO: select BOOST YES for smoother, creamier results; select BOOST NO for more texture.

Auto-iQ FROZEN DRINK Takes all the guesswork out of turning ice, juices, and fruit into expertly blended frozen drinks.

Auto-iQ SMOOTHIE Great for creamy, super-smooth drinks made from frozen fruit, ice, or dairy products.

Auto-iQ EXTRACT Ideal for hard, leafy, or ﬁbrous whole fruits and vegetables, including their skins, seeds, and stems.

Auto-iQ MIX Delivers the perfect speed and blending time for Precision Processor™ Bowl creations including smoothie bowls, savory bowls, dips, and sauces.

Auto-iQ CHOP Features timed pulses and pauses to give you consistent chopping results for a range of recipes, including ingredient prep, salsas, and ground meat.

Auto-iQ DOUGH Takes all the guesswork out of creating perfect dough for bread, pizza, and decadent desserts.

9 1- 877-646-5288

Page 11

BEFORE FIRST USE

1 Remove all packaging materials from the appliance. Exercise care when unpacking blade

assemblies and Blade Discs. All blade assemblies and Blade Discs are sharp.

2 The Chopping Blade Assembly and Stacked Blade Assembly are NOT locked in place in their

containers. Handle the Chopping Blade Assembly and Stacked Blade Assembly by grasping the top of the shaft.

3 Handle the Pro Extractor Blades® Assembly by grasping around the perimeter of the blade

assembly base.

4 Wash containers, lids, Blade Discs, and blade assemblies in warm, soapy, water using a

dishwashing utensil with a handle or the provided cleaning brush to avoid direct contact with the blades. Exercise care when handling blade assemblies, as the blades are sharp.

5 Thoroughly rinse and air-dry all parts.

6 All attachments are dishwasher safe. It is recommended that the lids, Blade Discs, and blade

assemblies be placed on the top rack of the dishwasher. Ensure blade assemblies and Blade Discs are removed from their containers before placing in the dishwasher. Exercise care when handling blade assemblies or Blade Discs.

7 Wipe the motor base with a clean, damp cloth.

10ninjakitchen.com

Page 12

USING YOUR HIGH-SPEED BLENDER CUP

MIX

FROZEN DRINK

IMPORTANT: Review all warnings on pages 3–6 before proceeding.

TIP: For recommended ﬁlling instructions, see note on page 29.

NOTE: Auto-iQ® programs have pauses and changes in speed throughout the cycle.

11 1- 877-646-5288

Place the unplugged motor base on a clean, dry, and level surface such as a countertop or table. Press downward on the motor base to adhere the suction cups to the work surface. Ensure the motor base is connected to power.

2 Add ingredients to the

High-Speed Blender cup. DO NOT add ingredients past the Max Liquid line on the cup.

Page 13

MIX

FROZEN DRINK

3 Install the Pro Extractor Blades® Assembly

onto the top of the cup. Twist the lid clockwise until it’s sealed tightly.

Turn the High-Speed Blender cup upside down and install onto the motor base. Align the tabs on the cup with the slots on the base, then twist until you hear a click. When the unit is connected to power and the container is correctly locked on to the motor base, the program buttons will illuminate and the unit will be ready for use.

12ninjakitchen.com

Page 14

USING YOUR HIGH-SPEED BLENDER CUP - CONT.

IMPORTANT: Review all

warnings on pages 3–6 before proceeding.

NOTE: Auto-iQ® Technology can sense which container is on the motor base. The available function lights will illuminate depending on which container is placed on the motor base. Not all function lights will be available for every container.

MIX

FROZEN

DRINK

MIX

FROZEN

DRINK

13 1- 877-646-5288

5 Press START/STOP to

run continuously for 60 seconds. If using an AutoiQ program, ﬁrst select BOOST YES or BOOST NO, then the Auto-iQ program that best suits your recipe. The Auto-iQ feature will automatically stop the appliance at the end of the program. To pause the appliance at any time, press the currently active button a second time. Reference page 9 for program descriptions.

6 To remove the cup from

the motor base, turn the cup counterclockwise and then lift it.

Page 15

7 Remove the Pro Extractor

Blades® Assembly by twisting the cap counterclockwise. Do not store blended contents with Pro Extractor Blades Assembly attached. Exercise care when handling the blade assembly, as the blades are sharp.

8 Unplug the appliance

when ﬁnished. To release the motor base, place your hands underneath both sides of the motor base and gently pull the unit up and towards you. Refer to page 30 for storing instructions.

9 To enjoy your drink on

the go, place the Spout Lid onto the High-Speed Blender cup and twist clockwise until ﬁrmly sealed. For storing ingredients in the cup, use only the Spout Lid to cover.

14ninjakitchen.com

Page 16

USING YOUR PRECISION PROCESSOR™ BOWL

MIX

FROZEN DRINK

IMPORTANT: Review all warnings on pages 3–6 before proceeding.

TIP: Select BOOST YES for the smoothest, creamiest results—ideal for creamy dips like hummus. Select BOOST NO when a chunkier texture is desired—perfect for dishes like spinach & artichoke dip.

TIP: If the blade assembly is not fully seated, you will not be able to install and lock the lid into position.

TIP: To learn more about the unit’s programs, check out page 9.

MIX

FROZEN DRINK

NOTE: Auto-iQ®

programs have pauses and changes in speed throughout the cycle.

NOTE: DO NOT add

ingredients before installing the blade assembly.

NOTE: For best results,

follow recipe loading instructions.

15 1- 877-646-5288

2 Lower the Precision

Processor bowl onto the motor base.

Page 17

MIX

FROZEN DRINK

Rotate Precision Processor™ bowl clockwise until you hear a click.

MIX

FROZEN

DRINK

4 Exercising care, grasp the

Chopping Blade Assembly by the top of the shaft and place it onto the drive gear inside the bowl. Note that the Chopping Blade Assembly will ﬁt loosely onto the drive gear.

MIX

FROZEN DRINK

5 Add ingredients to the

bowl, making sure not to exceed the Max Liquid and max ﬁll lines.

16ninjakitchen.com

Page 18

USING YOUR PRECISION PROCESSOR™ BOWL - CONT.

IMPORTANT: Review all

warnings on pages 3–6 before proceeding.

NOTE: Please follow the same instructions for the Dough Blade Assembly.

MIX

FROZEN DRINK

MIX

FROZEN DRINK

17 1- 877-646-5288

6 Place lid on Precision

Processor Bowl, with black line on tab aligned slightly to the right of tab on front of bowl. Turn lid clockwise to lock in place. When properly locked, the white line on lid will line up with the black line on bowl. When the unit is connected to power and the container is correctly locked into the motor base, the program buttons will illuminate and the unit will be ready for use.

7 Press START/STOP to

Page 19

MIX

FROZEN DRINK

8 To remove the bowl from

the motor base, turn the bowl counterclockwise and then lift it.

9 Remove the lid by pressing

the release button on the front tab, twisting the lid counterclockwise, and lifting up. Always remove the Chopping Blade Assembly before emptying any of the ingredients in the bowl. To remove the Chopping Blade Assembly, carefully grasp it by the top of the shaft and lift it out of the bowl.

10 Unplug the appliance

when ﬁnished. To release the motor base, place your hands underneath both sides of the motor base and gently pull the unit up and towards you. Refer to page 30 for storing instructions.

18ninjakitchen.com

Page 20

ASSEMBLING YOUR AUTO-SPIRALIZER™

MIX

FROZEN DRINK

IMPORTANT: Review all warnings on pages 3–6 before proceeding.

IMPORTANT: As a safety feature, if the Spiralizer Bowl and Feed Chute Lid are not properly installed, the timer will display “--” and the motor will be disabled.

NOTE: To ﬁt properly, the tabs on the sides of the Blade Disc must align with the gaps on the top of the Collecting Bowl.

MIX

FROZEN

DRINK

MIX

FROZEN

DRINK

19 1- 877-646-5288

1 Place the unplugged

motor base on a clean, dry, and level surface such as a countertop or table. Press downward on the motor to adhere the suction cups to the work surface. Ensure the motor base is connected to power.

2 Lower the Spiralizer Bowl

onto the motor base.

3 Rotate the Spiralizer Bowl

clockwise until it clicks into place.

Page 21

MIX

FROZEN

DRINK

MIX

FROZEN

DRINK

MIX

FROZEN

DRINK

MIX

FROZEN DRINK

4 Place the Collecting Bowl inside the

Spiralizer Bowl, aligning it over the gear post.

5 Choose your Blade Disc, making sure to

handle it carefully.

6 Install the Blade Disc onto the top of the

Collecting Bowl. The rim of the Blade Disc should sit ﬂush against the top of the bowl, and the tabs on the sides of the Blade Discs must align with the slots on the top of the Collecting Bowl.

7 Assemble the Feed Chute Lid on top of the

Spiralizer Bowl. Turn the lid clockwise onto the Spiralizer Bowl, aligning the gray tabs on the lid with the front of the bowl. When the unit is connected to power and the container is correctly assembled onto the motor base, the START/STOP button will illuminate, indicating that the unit is ready for use.

20ninjakitchen.com

Page 22

USING YOUR AUTO-SPIRALIZER™

IMPORTANT: Review all

warnings on pages 3–6 before proceeding.

IMPORTANT: After Spiralizing an ingredient, all leftover pieces must be removed from the Collecting Bowl and Blade Disc before Spiralizing again.

NOTE: To ﬁnd out how to properly prep your ingredient, refer to the Food Prep section in your Quick Start Guide or your Inspiration Guide.

MIX

FROZEN

NOTE: Never Spiralize multiple ingredients at one time.

DRINK

21 1- 877-646-5288

1 Before spiralizing, prepare

your ingredient by cutting it so that it is no more than 3 inches wide. Place the prepped ingredient into the Feed Chute, through the opening at the top.

2 Center the ingredient

on the pin in the center of the Blade Disc, then push down, securing the ingredient onto the pin.

Page 23

MIX

FROZEN

DRINK

MIX

FROZEN DRINK

MIX

FROZEN DRINK

3 Place the Food Pusher on

top of the ingredient and press down ﬁrmly to hold in place.

4 Select START/STOP to

begin Spiralizing. Continue to press ﬁrmly with Food Pusher to guide ingredient through Feed Chute.

5 Spiralizing is complete

when the Food Pusher sits ﬂat atop the Feed Chute Lid. Press START/STOP to power off the motor.

22ninjakitchen.com

Page 24

USING YOUR AUTO-SPIRALIZER™ - CONT.

IMPORTANT: Review all

warnings on pages 3–6 before proceeding.

MIX

FROZEN

DRINK

23 1- 877-646-5288

6 To remove the Spiralizer

Bowl from the motor base, turn the bowl counterclockwise and liftup.

To remove the Feed Chute Lid, press the release button on the left side of the front tab, then twist the lid counterclockwise and lift up.

Page 25

8 Remove the Collecting

Bowl by lifting it up and out of the Spiralizer Bowl. Remove the Blade Disc by gripping the handles on the side of the disc and liftingup.

9 Remove the noodles from

the Collecting Bowl and prepare as desired.

10 Unplug the appliance

when ﬁnished. To release the motor base, place your hands underneath it and gently pull it toward you. Refer to page 30 for storing instructions.

24ninjakitchen.com

Page 26

USING YOUR TOTAL CRUSHING® BLENDER PITCHER

MIX

FROZEN DRINK

IMPORTANT: Review all warnings on pages 3–6 before proceeding.

TIP: If the Stacked Blade Assembly is not fully seated, you will not be able to install and lock the lid into position.

TIP: To learn more about the unit’s programs, check out page 9.

NOTE: Auto-iQ®

programs have pauses and changes in speed throughout the cycle.

NOTE: DO NOT add

ingredients before completing installation of the Stacked Blade Assembly.

NOTE: The pitcher can

only be installed in one orientation. The handle must be positioned on the front-right corner of the motor base to operate the appliance.

1 Plug in motor base and

place on a clean, dry, level surface such as a countertop or table. Press downward on the motor base to adhere the suction cups to the work surface.

MIX

FROZEN DRINK

Lower the Total Crushing Blender pitcher onto the motor base. The handle should be aligned slightly to the right and the pitcher should be oriented so the LOCK symbols are visible on the motor base. Then rotate the pitcher clockwise until you hear a click.

25 1- 877-646-5288

Page 27

MIX

FROZEN DRINK

MIX

FROZEN

DRINK

MIX

FROZEN

DRINK

3 Exercising care, grasp the

Stacked Blade Assembly by the top of the shaft and place it onto the drive gear inside the pitcher. Note that the blade assembly will ﬁt loosely onto the drive gear.

4 Add ingredients to the

pitcher, making sure not to exceed the Max Liquid line on the side of the pitcher. When blending liquids, such as beverages or smoothies, DO NOT exceed the Max Liquid line on the side of thepitcher.

5 Place the lid on the pitcher,

aligning the triangle symbol located on the lid with the triangle symbol located on the pitcher’s handle. Press down on the handle until you hear a click. The triangle symbols MUST be aligned for the lid to lock into place and the appliance to operate. When the unit is connected to power and the container is correctly locked into the motor base, the program buttons will illuminate and the unit will be ready for use.

26ninjakitchen.com

Page 28

USING YOUR TOTAL CRUSHING® BLENDER PITCHER - CONT.

IMPORTANT: Review all

warnings on pages 3–6 before proceeding.

IMPORTANT: As a safety feature, if the pitcher and lid are not properly installed, the timer will display “--” and the motor will be disabled. If this happens, repeat step 5 on page 26. When the pitcher and lid are properly installed, the program buttons will illuminate steadily, indicating the appliance is ready for use.

TIP: The BOOST button

toggles between YES and NO: select BOOST YES for smoother, creamier results; select BOOST NO for more texture.

6 Press START/STOP to

MIX

FROZEN

DRINK

MIX

FROZEN

DRINK

7 If not using Auto-iQ and

ingredients have reached your desired consistency, stop the appliance by pressing the START/STOP button, and wait for the appliance to come to a complete stop.

To remove the pitcher from the motor base, turn the pitcher counterclockwise and then lift it.

27 1- 877-646-5288

Page 29

9 To pour out thinner

mixtures, ensure that the lid is locked in place, then open the pour spout cap.

10 For thicker mixtures

that cannot be emptied through the pour spout, remove the lid and Stacked Blade Assembly before pouring. To remove the lid, press the RELEASE button and lift the handle. To remove the blade assembly, carefully grasp it by the top of the shaft. The pitcher can then be emptied.

11 Unplug the appliance

when ﬁnished. To release the motor base, place your hands underneath both sides of the motor base and gently pull the unit up and towards you. Refer to page 30 for storing instructions.

28ninjakitchen.com

Page 30

SUGGESTED USES & FILLING INSTRUCTIONS

IMPORTANT: Review all

warnings on pages 3–6 before proceeding.

ORDERING REPLACEMENT PARTS

To order additional parts and attachments, please visit ninjaccessories.com or contact customer service at 1-877-646-5288.

ice,

frozen ingredients

seeds, powders,

nut butters

liquids, yogurt

leafy greens,

herbs

fresh fruits,

veggies

29 1- 877-646-5288

FILLING YOUR HIGH-SPEED BLENDER CUP

For best results, always follow recipe directions when ﬁlling your High-Speed Blender cup. When you’re not using a recipe, use the following guidelines:

Start with fresh fruit or veggies (for best results, cut ingredients in 1-inch chunks). Next add leafy greens or herbs, followed by any liquids like water, juice, milk, or yogurt. Then add seeds, powders or nut butters. Lastly, add ice or frozen ingredients. Remember to securely tighten the Assembly

and don’t overﬁll the cup.

Pro Extractor Blades®

Page 31

CARE & MAINTENANCE

CLEANING

1 Separate all parts.

2 Wash all containers in warm, soapy water

with a soft cloth.

3 Hand Washing

Wash blade assemblies and Blade Discs in warm, soapy water using a dishwashing utensil with a handle or the provided cleaning brush to avoid direct contact with the blades. Exercise care when handling blade assemblies as the blades are sharp. Thoroughly rinse and air-dry all parts.

Dishwasher

All attachments are dishwasher safe. It is recommended that the lids, containers, Blade Discs, and blade assemblies be placed on the top rack of the dishwasher ONLY. Ensure that blade assemblies are removed from their containers before placing in the dishwasher. Exercise care when handling blade assemblies.

4 Wipe the motor base with a clean, damp

cloth. Allow time to dry before operation.

STORING

Wrap the power cord around the cord wrap on the back of the motor base. Store the unit upright and store all blade assemblies inside or attached to their respective containers with their lids locked into place. Store the blade discs in the storage box.

RESETTING THE MOTOR THERMOSTAT

This appliance features a unique safety system that prevents damage to the motor and drive system should you inadvertently overload the appliance. If the appliance is overloaded, the motor will be temporarily disabled. Should this occur, follow the reset procedure below.

1 Unplug the appliance from the

electricaloutlet.

2 Allow the appliance to cool for

approximately 15 minutes.

Remove the container lid and blade assembly. Empty the container and ensure no ingredients were jamming the blade assemblies.

4 Reset the unit in accordance with the

applicable instructions for the container and blade type.

IMPORTANT: Ensure that maximum

capacities are not exceeded. This is the most typical cause of appliance overload.

If your unit needs servicing, please call

Customer Service at 1-877-646-5288.

DO NOT store blended or unblended ingredients in the High-Speed Blender cup with the Pro Extractor Blades® assembly attached.

DO NOT stack items on top of the containers. Store any remaining attachments alongside the appliance or in a cabinet where they will not be damaged or create a hazard.

30ninjakitchen.com

Page 32

TROUBLESHOOTING GUIDE

WARNING: To reduce the risk of shock and unintended operation, turn power o and unplug unit before troubleshooting.

Unit doesn’t turn on.

• Make sure unit is plugged in.

• Display will read “--” once connected to power.

• Insert and rotate container clockwise in base until it clicks. Programs will illuminate indicating

that your blender is ready for use.

Unit doesn’t turn o.

• Remove container from base by rotating it counterclockwise and lifting it up. Display should

turn off. Unplug the power cord from the outlet.

Lid/Pro Extractor Blades® Assembly is hard to assemble.

• Set the cup on a level surface. Carefully place the lid or Pro Extractor Blades Assembly on the

top of the cup and align the threads so the lid/Pro Extractor Blades Assembly sits ﬂat on the cup. Twist clockwise until you have a tight seal.

Food is not evenly chopped.

• For best results when chopping, cut pieces down to even sizes and do no overﬁll the

Precision Processor™ bowl.

Doesn’t mix well; ingredients get stuck.

• Using the Auto-iQ

pauses allow the ingredients to settle toward the Pro Extractor Blades Assembly. If ingredients are routinely getting stuck, adding some liquid will usually help.

• When ﬁlling the cup, start with fresh fruit or veggies, then leafy greens or herbs. Next add

liquids or yogurt, then seeds, powders, or nut butters. Finally, add ice or frozen ingredients.

Motor base won’t stick to counter or tabletop.

• Make sure surface and suction feet are wiped clean. Suction feet will only stick to smooth

surfaces.

• Suction feet WILL NOT stick on some surfaces such as wood, tile, and non-polished ﬁnishes.

• DO NOT attempt to use appliance when the motor base is stuck to a surface that is not

secure (cutting board, platter, plates, etc.).

Unit is dicult to remove from counter for storage.

• Place your hands underneath both sides of the motor base and gently pull the unit up and

towards you.

programs is the easiest way to achieve great results. The pulses and

31 1- 877-646-5288

Page 33

You get a blinking “- -” Message

• Auto-iQ Technology can detect which container is on the motor base. You may be trying to

use a program that is not designed for the container you have installed. The programs will light up indicating which programs are available for each container.

You cannot create snow from solid ice.

• Do not use ice that has been sitting out or has started to melt. Use ice straight from the

freezer.

• Start with a few pulses and then go to a continuous blending cycle.

You get semi-circular or shredded noodles.

• If the Collecting Bowl is overﬁlled, causing the Blade Disc to lift up after Spiralizing, your

ingredient may have been too large. Make sure to trim and prepare your ingredients properly before Spiralizing by following the instructions in the Food Prep section in your Quick Start Guide or Inspiration Guide.

• For the most consistent results, be sure to center the ingredient onto the pin located in the

center of the Blade Disc. (Refer to page 21, step 2).

Ingredient is not fully processed and is spinning on the pusher.

• Remove remaining ingredient from Blade Disc pin and trim top and bottom so that both are

ﬂat. Make sure you center ingredient on the Blade Disc pin and secure the Food Pusher ﬁrmly on top of the ingredient. While maintaining pressure on food pusher, press the START/STOP button.

32ninjakitchen.com

Page 34

NOTES

33 1- 877-646-5288

Page 35

ONE (1) YEAR LIMITED WARRANTY

The 1-Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.

SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of 1 year from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in this Instruction manual, subject to the following conditions and exclusions.

What is covered by my warranty?

1. The original unit and/or non-wearable components deemed defective, in SharkNinja’s sole discretion,

will be repaired or replaced for up to 1 year from the original purchase date.

2. In the rare event that a replacement unit is issued, the warranty coverage ends six months after the

receipt date of the replacement unit or the remainder of the existing warranty, whichever is greater. If the unit is replaced, SharkNinja reserves the right to replace the unit with one of equal or greater value.

What is not covered by my warranty?

Our Customer Service and Product Specialists are available to provide all the warranty service options available to you, including the possibility of upgrading to our VIP Warranty Service Options for select product categories.

1. Normal wear and tear of wearable parts (including all blending vessels, lids, blades and blender base)

which require regular maintenance and/or replacement to ensure the proper functioning of your unit are not covered by this warranty.

2. Any unit that has been tampered with or used for commercial purposes.

3. SharkNinja will cover the cost for the customer to send the unit to us for repair or replacement. A fee

of $19.95 for return shipping costs will be charged at the time of return shipment of the repaired or replacement unit.

4. Damage caused by misuse, abuse, or negligent handling, or damage due to mishandling in transit.

5. Consequential and incidental damages.

6. Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the

product or any of its parts which have been performed by a repair person not authorized by SharkNinja.

7. Products purchased, used or operated outside of North America.

Problems with your unit/How to get service:

If your appliance fails to operate properly while in use under normal household conditions within the warranty period, visit ninjakitchen.com for product care/maintenance self-help. Our Customer Service and Product Specialists are also available at 1-877-646-5288 to assist with product support and warranty service options.

How to initiate a warranty claim:

You can call 1-877-646-5288 to have a Customer Service specialist assist you. Please note, you must call 1-877646-5288 to initiate a warranty claim. Return and Packing Instruction information will be provided at that time.

For Customer Service hours, visit ninjakitchen.com.

Replacement parts are available for purchase at ninjakitchen.com. For more information on what is classiﬁed as wearable and non-wearable parts, please visit ninjakitchen.com/warranty.

This warranty gives you speciﬁc legal rights, and you may also have other rights that vary from state to state.

Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

34ninja kitchen.com

Page 36

SharkNinja Operating LLC US: Needham, MA 02494 CAN: Ville St-Laurent, QC H4S 1A7 1-877-646-5288 ninjakitchen.com

Illustrations may differ from actual product. We are constantly striving to improve our products; therefore the speciﬁcations contained herein are subject to change withoutnotice.

AUTO-IQ,

NINJA, PRO EXTRACTOR BLADES, registered trademarks of Shar kNinja Operating LLC.

4-IN-1 KITCHEN SYSTEM, AUTO-IQ BOOST, AUTO-SPIRALIZER, and PRECISION PROCESSOR are trademarks of SharkNinja Ope rating LLC.

For SharkNinja U.S. Patent information, visit sharkninja.com/USPatents.

and TOTAL CRUSHING are

PRINTED IN CHINA

@ninjakitchen

Ninja NN210Q Owner's Manual

Specifications and Main Features

Frequently Asked Questions

User Manual