NOTE: Thi s unit has a sh ort power su pply
cord to reduce th e risk resulting from
becomin g entangl ed in or tripp ing over
a long cord. An extensio n cord may be
used if you are c areful in it s use:
1. The elec trical rati ng of the extension
cord shoul d be at least a s great as the
electri cal rating of the applia nce.
2. An extensio n cord with the powe r cord
must be arranged so th at it will not drape
over the countertop or tabletop where
they can be pulled on by chi ldren or
tripped over a ccidenta lly.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL
APPLIANCES, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS
BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS
BEFORE USING YOUR NINJA
™
PROFESSIONAL BLENDING SYSTEM.
POLARIZED PLUG
WARNING: To reduce the risk of
electric shock, this appliance has a
polarized plug (one blade is wider
than the other). This plug will fit into
a polarized outlet only one way. If the
plug does not fit fully into the outlet,
reverse the plug. If it still does not
fit, contact a qualified electrician to
install the proper outlet. DO NOT
modify the plug in any way.
14. To reduce risk of in jury, never pla ce the
blade ass embly on ba se without pitcher
properly a ttache d.
15. DO NOT operate this ap pliance o n or near
any hot surf aces (such as ga s or electr ic
burner o r in a heated oven).
16. The us e of attach ments or a ccessorie s
not recomm ended by the manufac turer
may result in fire, electric shock or
personal injur y.
17. DO NOT remove the pitche r from the
motor base wh ile the blender is in
operatio n.
18. To reduce the risk of i njury, NE VER
operate the a ppliance without the lid in
place; DO N OT try to defeat th e interloc k
mechan ism; make sure that the cutti ng
blades are properly i nstalle d before
operatin g the applia nce.
19. DO NOT exp ose pitcher to ex treme
temperature changes.
20. Exercise extreme cauti on when blending
hot liquid s.
21. CAUTION: Do not p rocess foo d or liquid
that is hotte r than 18 0°F / 82°C. Allow
very hot in gredient s to cool before
processing.
22. DO NOT overfil l.
23. Extreme c aution mus t be used when
moving an ap pliance co ntaining h ot food,
water or other liquids .
24. When processing hot liquids, open th e
pouring s pout cap .
25. DO NOT operate the applia nce empty.
26. Always allow the appliance to cool before
taking of f parts and before cl eaning .
27. If the appli ance overhe ats, a thermal
switch will become activated and shut o ff
the motor. To reset, unplu g the appliance
and let it coo l down for app roximately 10
minutes before using ag ain.
28. THIS PRODU CT IS INT ENDE D FOR
HOUSE HOLD US E ONLY. Do not use
this appli ance for any thing other than its
intended u se. Do not us e outdoors .
1. To protect agains t electri cal shock, do not
submerg e the blend er or allow th e power
cord to come into co ntact with water or
any other liq uid.
2. Close supervisio n is necessary when a ny
applian ce is used by or ne ar children.
3. Never leave an appliance un attende d
when in use .
4. Turn the appl iance Of f and remove the
power cord fro m the electrical outl et
when not in u se, before assembling or
disasse mbling pa rts and b efore clea ning.
To unplug, gras p the plug an d pull from
the elec trical outl et. Never pull from the
power cord.
5. DO NOT abuse t he power cord . Never
carry th e appliance by the power cord
or yank it to disconnect f rom elec trical
outlet; instead grasp the plug and pull to
disconnect.
6. DO NOT operate any appliance with
a damage d cord or plug , or after th e
applian ce malfun ctions , has been
dropped o r damage d in any mann er.
Return the appliance to EU RO-PRO
Operating LLC for examina tion, repair or
adjustm ent.
7. DO NOT let the p ower cord han g over
the edge of table or counter or touch ho t
surfaces such as the s tove.
8. Always use applia nce of a dry, level
surface.
9. Keep hands, h air, clothing , as well as
utensils ou t of container while ble nding to
reduce the r isk of severe inju ry to persons
or damag e to the applia nce. A scraper
may be used bu t only when th e blende r is
not runni ng.
10. C AUTION : Blade ass embly is sh arp,
handle with care. When handli ng the
blade ass embly, always hol d by the shaft.
11. Avoid contact with moving par ts.
12. DO NOT attemp t to sharp en blade s.
13. DO NOT use the appliance if blad e
assembl y is bent or da maged.
www .ni njaki tch en. com
2 3
TOL L FR EE: 1- 800-79 8-7398