Ninja NJ600 User Manual

Professional Blender
OWNER’S GUIDE
NJ600 30
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING YOUR NINJA
PROFESSIONAL BLENDING SYSTEM.
POLARIZED PLUG WARNING: To reduce the risk of
electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. DO NOT
modify the plug in any way.
1. To protect against electrical shock, do not submerge the blender or allow the power cord to come into contact with water or any other liquid.
2. Close supervision is necessary when any appliance is used by or near children.
3. Never leave an appliance unattended when in use.
4. Turn the appliance Off and remove the power cord from the electrical outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the electrical outlet. Never pull from the power cord.
5. DO NOT abuse the power cord. Never carry the appliance by the power cord or yank it to disconnect from electrical outlet; instead grasp the plug and pull to disconnect.
6. DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions, has been dropped or damaged in any manner. Return the appliance to EURO-PRO Operating LLC for examination, repair or adjustment.
7. DO NOT let the power cord hang over the edge of table or counter or touch hot surfaces such as the stove.
8. Always use appliance of a dry, level surface.
9. Keep hands, hair, clothing, as well as utensils out of container while blending to reduce the risk of severe injury to persons or damage to the appliance. A scraper may be used but only when the blender is not running.
10. CAUTION: Blade assembly is sharp, handle with care. When handling the blade assembly, always hold by the shaft.
11. Avoid contact with moving parts.
12. DO NOT attempt to sha rpen blades.
13. DO NOT use the appliance if blade assembly is bent or damaged.
14. To reduce risk of injury, never place the blade assembly on base without pitcher properly attached.
15. DO NOT operate this appliance on or near any hot surfaces (such as gas or electric burner or in a heated oven).
16. The use of attachments or accessories not recommended by the manufacturer may result in fire, electric shock or personal injury.
17. DO NOT remove the pitcher from the motor base while the blender is in operation.
18. To reduce the risk of injury, NEVER operate the appliance without the lid in place; DO NOT try to defeat the interlock mechanism; make sure that the cutting blades are properly installed before operating the appliance.
19. DO NOT expose pitcher to extreme temperature changes.
20. Exercise extreme caution when blending hot liquids.
21. CAUTION: Do not process food or liquid that is hotter than 180°F / 82°C. Allow very hot ingredients to cool before processing.
22. DO NOT overfill.
23. Extreme caution must be used when moving an appliance containing hot food, water or other liquids.
24. When processing hot liquids, open the pouring spout cap.
25. DO NOT operate the appliance empty.
26. Always allow the appliance to cool before taking off par ts and before cleaning.
27. If the appliance overheats, a thermal switch will become activated and shut of f the motor. To reset, unplug the appliance and let it cool down for approximately 10 minutes before using again.
28. THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY. Do not use this appliance for anything other than its intended use. Do not use outdoors.
NOTE: This unit has a short power supply
cord to reduce the risk resulting from becoming entangled in or tripping over a long cord. An extension cord may be used if you are careful in its use:
1. The electrical rating of the extension cord should be at least as great as the electrical rating of the appliance.
2. An extension cord with the power cord must be arranged so that it will not drape over the countertop or tabletop where they can be pulled on by children or tripped over accidentally.
2 3
TOL L F RE E: 1- 8 00 -79 8-739 8
ww w.nin ja ki tc hen. com
Contents
Thank you for purchasing the Ninja
Professional Blender.
Getting Started .................................................................................... 6
Using the Ninja
Care & Maintenance ........................................................................... 11
Hints ......................................................................................................... 11
Replacement Parts ............................................................................. 11
Blending Chart ..................................................................................... 12
Troubleshooting Guide ..................................................................... 12
Recipes .................................................................................................... 13
Warranty ................................................................................................. 16
Registration ........................................................................................... 17
Professional Blender......................................... 8
TECHNICAL SPECIFICATIONS
Voltage: 120V., 60Hz.
Power: 1000 Watts
Pitcher Capacity: 2.15 L (72 ounces) (9 cups)
4 5
TOL L F RE E: 1- 8 00 -79 8-739 8
ww w.nin ja ki tc hen. com
Getting Started
a
b
c
d
The Ninja™ Professional Blender is a high powered kitchen tool that is perfect for ice crushing, blending, pureeing and controlled processing. Create all of your favorite recipes fast and easy with just one touch of a button. For best results, be sure to carefully read all the instructions contained in the manual before using this appliance.
e
f
g
h
i
FEATURES:
• Easy lock lid with built-in pour spout
• Patented Ninja™ Blade technology
a Lid with Locking Handle
b Locking Handle Release Button
c Pouring Spout with Cap
d Pitcher
e Ninja
f Gear Shaft
6-Blade
6 7
TOL L F RE E: 1- 8 00 -79 8-739 8
g Motor Base
h Control Panel
i Non Slip Bottom
j Power Cord (not shown)
k Cord Storage (in back) (not shown)
• Extra Large 72 oz. pitcher
• Easy to clean electronic control panel
• Cord storage
• Non Slip Bottom
ww w.nin ja ki tc hen. com
Loading...
+ 7 hidden pages