Ninja NJ300, NJ200 User Manual

®
WARRIOR
NJ200
OWNER’S GUIDE
NJ200_30_IB_ENG_110112.indd 1 11-01-12 11:01 AM
For Household Use Only
WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING YOUR NINJA® WARRIOR™.
POLARIZED PLUG WARNING: To reduce the risk of
electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. DO NOT modify the plug in
any way.
1. This appliance should not be used by children and care should be taken when used near children.
2. To protect against electric shock, DO NOT immerse cord, plug or any part of the main unit in water or any other liquids.
3. DO NOT let cord hang over edge of table or counter, or touch hot surfaces including the stove.
4. DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions, has been dropped or damaged in any manner. Return the appliance to EURO-PRO Operating LLC for examination, repair or adjustment.
5. Unplug appliance from outlet when not in use, before putting on or removing parts and before cleaning.
6. DO NOT place on or near a hot gas or electric burner.
7. The use of accessory attachments, not sold or recommended by EURO-PRO Operating LLC may cause fire, electrical shock or risk of personal injury.
8. Extreme caution must be used when moving an appliance containing hot food, water or other liquids.
9. When mixing liquids, especially hot liquids, use the splash guard or make small quantities at a time to reduce spillage, spattering and possibility of injury from burning.
10. Use this appliance on a stable work surface away from water.
11. DO NOT remove the power head before the chopping blades have stopped turning.
12. CAUTION! Chopping blades are sharp, handle with care. When handling the chopping blades, always hold by the shaft.
2
NJ200_30_IB_ENG_110112.indd 2 11-01-12 11:01 AM
TOL L FR EE : 1 -8 00 -79 8-7 398
13. DO NOT attempt to sharpen
blades.
14. DO NOT expose containers to extreme temperature changes.
15. DO NOT use container if it is cracked or chipped.
16. DO NOT use the appliance if chopping blades are bent or damaged.
17. Avoid contact with moving parts at all times. Keep hands, hair, clothing as well as spatulas and other utensils away from moving/cutting blades and containers during operation to prevent risk of severe personal injury and/or damage to the appliance. A scraper may be used but must be used only when the appliance is not running.
18. Immediately release the On/Off pulse button on the power head in the event that the appliance malfunctions during use.
19. DO NOT use outdoors.
20. DO NOT use appliance for other than intended use.
21. DO NOT operate the appliance for more than 2 minutes.
22. Make sure that the gear box is securely attached to the processor bowl before operating the appliance.
23. Make sure that the power head is securely attached to the gear box or the blending shaft when using the blending cup or the processor bowl.
24. To reduce the risk of injury, NEVER place the chopping blades on the gear box and power head without first putting the processor bowl properly in place.
25. The maximum rating is based on the use of the chopping blade. Other recommended attachments may draw significantly less power or current.
26. DO N OT operate the appliance empty.
27. If the appliance overheats, a thermal switch will become activated and shut off the motor. To reset, unplug the appliance and let it cool down for approximately 10 minutes before using again.
NOTE: This unit has a short power supply cord to reduce the risk resulting from becoming entangled in or tripping over a long cord. DO NOT USE
AN EXTENSION CORD WITH THIS PRODUCT.
SAVE THESE INSTRUCTIONS
ww w.n injak itc he n.c om
NJ200_30_IB_ENG_110112.indd 3 11-01-12 11:01 AM
3
®
The Ninja effortlessly blend ice, fruits and vegetables into delicious, healthy smoothies. The Ninja Warrior
Warrior™ is equipped with a patent pending tri-blade system that can
features portable power options so you can blend in your own containers or activate the 40 oz. processing bowl for even chopping! For best results, be sure to carefully read all the instructions contained in the manual before using this appliance.
350 Watt Power Head
The 350 watt power head operates on 120V., 60Hz. electrical power. NEV ER allow the
power head to become wet when plugged into an electrical outlet.
WARNING: The power head should never be immersed in water or any other liquid.
CAUTION: Make sure that the power head is unplugged from the electrical outlet and that
the blades have stopped turning before attaching or removing any accessory.
CAUTION: Blades are sharp! Use extreme caution when handling the blades. Always
hold them by the shaft. Do not
attempt to sha rpen blades.
IMPORTANT: Never run the appliance empty.
®
This manual covers model: NJ200 30
TECHNICAL SPECIFICATIONS
Voltage: 120V., 60Hz.
Power: 350 Watts
Processor Bowl: 40 ounces (5 cups)
Blending Cup: 32 ounces (4 cups)
4
NJ200_30_IB_ENG_110112.indd 4 11-01-12 11:01 AM
TOL L FR EE : 1 -8 00 -79 8-7 398
Contents
Thank you for purchasing
®
the Ninja Warrior
.
Getting Started ...................................................................................6
Using the Ninja
Using the Ninja
®
Warrior™ Blending Shaft Attachment .......7
®
Warrior™ Processing Bowl ... .........................8
Cleaning and Maintenance .............................................................9
Troubleshooting Guide ....................................................................9
Warranty ................................................................................................10
Registration ..........................................................................................11
FEATURES:
• Patent Pending Tri-Blade System - Crushes ice to snow!
• 40 oz. Processor Bowl - BPA Free
• 32 oz. Blending Cup - BPA Free
• Stainless steel blending shaft
• Extra long cord for portable power
• Dishwasher safe parts
ww w.n injak itc he n.c om
NJ200_30_IB_ENG_110112.indd 5 11-01-12 11:01 AM
5
Getting Started
d
a
b
g
c
h
e
k
f
a Power Head
b Turbo Button
c Power Button
d Gear Box (for 40 oz. processor bowl)
e Ninja
®
4-Blade (for 40 oz. processor
bowl)
6
TOL L FR EE : 1 -8 00 -79 8-7 398
i
j
f 40 oz. Processor Bowl with Non-Slip Base
g Blending Shaft (for 32 oz., Blending Cup)
h Storage Lid / Non-Slip Base
(for 32 oz., Blending Cup)
i Splash Guard (for 32 oz., Blending Cup)
j 32 oz. Blending Cup
k Power Cord
NJ200_30_IB_ENG_110112.indd 6 11-01-12 11:01 AM
Using the Ninja® Warrior™ Blending Shaft Attachment
For best results move the blending
Use caution when blending in a saucepan.
shaft up and down at an angle while blending.
Fig. 1
Fig. 2
CAUTION: Blades are sharp! Use extreme
caution when handling the blending shaft.
IMPORTANT: Do not use the blending
shaft in the processing bowl.
1 To attach the blending shaft to the power
head, place the power head onto the blending shaft and rotate to match the arrows to lock in place. (Fig. 1)
2 Plug the electrical cord into an wall
outlet.
3 Attach the storage lid/non-slip base to
the bottom of the blending cup. (Fig. 2)
4 Place the food into the blending cup
and then place the splash guard on the blending cup. Make sure that the splash guard is firmly attached to the top of the blending cup. (Fig. 3)
5 Insert the blending shaft through the
opening on the splash guard so that the blades are resting on top of the ingredients. (Fig. 4)
6 Press and hold the power button. The
blending shaft will continue to blend
Fig. 3
Fig. 4
as long as the power button is pressed. Move blending shaft up and down at an angle to combine ingredients.
7 Always release the power button before
removing the blending shaft from the food, especially when blending hot food or liquids. Always hold the power head with your hand and never leave the appliance unattended while in use.
NOTE: It is not recommended to operate
the appliance continuously for more than 2 minutes at a time.
8 To stop the appliance, release the power
button.
9 If you need a stronger burst of power,
press the turbo button.
10 When finished blending, unplug the
appliance from the outlet and remove the blender shaft from the power head by turning the power head clockwise.
CAUTION: Never remove the blending
shaft from the container while the unit is plugged in.
ww w.n injak itc he n.c om
NJ200_30_IB_ENG_110112.indd 7 11-01-12 11:01 AM
7
Using the Ninja® Warrior™ Processing Bowl
In order to obtain a better quality of chopping, operate the unit by using a “Pulse” method.
Fig. 5
Fig. 6
CAUTION: Blades are sharp! Use extreme
caution when handling the blades. Always hold the blade assembly by the shaft.
IMPORTANT: Do not use the blending
shaft in the processing bowl.
IMPORTANT: Never run the appliance
empty.
1 Place the processor bowl on a clean, dry,
level surface.
2 Holding the blade by the shaft, place it
onto the spindle pin inside the processor bowl. (Fig. 5)
IMPORTANT: Place the blade inside the
container carefully as blades are sharp.
WARNING: DO NOT try to place the
blade onto the power head and then into the processor bowl.
3 Add the ingredients to the processor
bowl. Make sure your total of ingredients don’t exceed the highest measured marking line on the side of the container.
Fig. 7
Fig. 8
IMPORTANT: Never add ingredients into
the processor bowl before placing the blades in first.
4 Place the gear box into position on top
of the processor bowl. (Fig. 6) Rotate to lock. (Fig. 7)
5 Place the power head on top of the gear
box and turn it counter clockwise to match the arrows and lock it into place. (Fig. 8)
6 For best results when chopping, pulse
the power button.
7 To remove the power head, turn it
clockwise to unlock. Rotate the gear box to unlock. Remove the gear box and the chopping blades carefully. Then remove the ingredients from the bowl.
IMPORTANT: It is not recommended to
operate the appliance continuously for more than 2 minutes at a time.
8
NJ200_30_IB_ENG_110112.indd 8 11-01-12 11:01 AM
TOL L FR EE : 1 -8 00 -79 8-7 398
Cleaning and Maintenance
CAUTION: Make sure that the power head is unplugged from power source before
inserting or removing any attachment and before cleaning.
Dishwasher
safe
Wipe clean
with a
damp cloth
Power
Head
ü ü
Blending
Shaft
ü
top rack
32 oz.
Blending
Cup
Splash
Guard
ü ü
top rack
Storage
Lid
ü
top rack
ü ü
Troubleshooting Guide
PROBLEMS POSSIBLE REASONS & SOLUTIONS
The unit has overheated. Unplug and wait approximately 10 minutes before using again.
Make sure the gear box is securely on the processing
Motor Doesn’t Start or Blades Don’t Rotate.
Food is Unevenly Chopped.
Food is Chopped Too Fine or is Too Watery.
bowl. Make sure the power head is securely placed on gear box
or the blending shaft. Check that the plug is securely inserted into the electrical
outlet. Check fuse or breaker. Replace fuse/reset breaker.
Either you are chopping too much food at one time, or the pieces are too large. Try cutting the food into smaller pieces of even size or processing smaller amounts per batch.
The food has been over processed. Use quick pulses or process for shorter time. Let blades stop completely between pulses.
40 oz.
Bowl
Blade Set Gear
Box
top rack
You Cannot Achieve Snow From Solid Ice.
Please call EURO-PRO Customer Service for any other servicing at 1 (800) 798-7398.
To purchase replacement parts, please visit our website: www.ninjakitchen.com
or contact customer service: 1-800-798-7398.
NJ200_30_IB_ENG_110112.indd 9 11-01-12 11:01 AM
Do not use ice that has been sitting out or has started to melt.
ww w.n injak itc he n.c om
9
Model
NJ200 30
ONE (1) YEAR LIMITED WARRANTY
EURO-PRO Operating LLC warrants this product to be free from material defects and
workmanship for a period of one (1) year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and exceptions.
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been performed by a repair person not authorized by EURO-PRO Operating LLC.
If your appliance fails to operate properly while in use under normal household conditions within the Limited Warranty period, you may return the complete appliance and accessories with proof of purchase and date, freight prepaid. For Customer Service support, call 1-800-798-7398 or visit our website www.ninjakitchen.com.
If the appliance is found by EURO-PRO Operating LLC to be defective, in EURO-PRO Operating LLC’s sole discretion, we will repair or replace it free of charge. Proof of purchase date and check made payable to EURO-PRO Operating LLC in the amount of $11.95 to cover the cost of return shipping and handling must be included.*
This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional warranties. The responsibility of EURO- PRO Operating LLC if any, is limited to the specific obligations expressly assumed by it under the terms of this Limited Warranty. In no event is EURO-PRO Operating LLC liable for incidental or consequential damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.
This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from province to province.
*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and to attach tag to item before packing with your name, complete address and phone number with a note giving purchase information, model number and what you believe is the problem with the item. We recommend you
Mark the outside of your package “ATTENTION CUSTOMER SERVICE”. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.
10
NJ200_30_IB_ENG_110112.indd 10 11-01-12 11:01 AM
TOL L FR EE : 1 -8 00 -79 8-7 398
OWNERSHIP REGISTRATION CARD
FOR CANADIAN CONSUMERS ONLY
Please fill out and mail the product registration card within ten (10) days of purchase. The registration will enable us to contact you in the unlikely event of a product safety notification. By returning this card you acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.
Mail to the following address:
• EURO-PRO Operating LLC 4400 Bois Franc, Ville St.Laurent, Québec, Canada H4S 1A7
Owner’s Name:
Address:
City: Province: Postal Code:
Date Purchased:
Name of Store:
Appliance Model:
NJ200 30
ww w.n injak itc he n.c om
NJ200_30_IB_ENG_110112.indd 11 11-01-12 11:01 AM
11
Euro-Pro Operating LLC US: Newton, MA 02459 CAN: Ville St-Laurent, QC H4S 1A7
1-800-798-7398
www.ninjakitchen.com
Copyright © 2011 Euro-Pro Operating LLC
Printed in China
Illustrations may differ from actual product.
NJ200.E.110112
NJ200_30_IB_ENG_110112.indd 1 11-01-12 11:01 AM
Loading...