Ninja NJ100 30, NJ100GR 30, NJ100GN 30, NJ110GR 30, NJ100PR 30 Owner's Manual

...
Page 1
OWNER’S GUIDE
Express Chop
NJ100 series
®
Page 2
2
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING YOUR NINJA® EXPRESS CHOP™.
POLARIZED PLUG WARNING: To reduce the risk of
electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. DO NOT
modify the plug in any way.
1. Close supervision is necessary when any appliance is used by or near children.
2. To protect against electric shock, DO NOT immerse cord, plug or any part of the main unit in water or any other liquids.
3. DO NOT let cord hang over edge of table or counter, or touch hot surfaces, including the stove.
4. DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions, has been dropped or damaged in any manner. Return the appliance to EURO-PRO Operating LLC for examination, repair or adjustment.
5. Unplug appliance from outlet when not in use, before putting on or removing parts and before cleaning.
6. DO NOT place on or near a hot gas or electric burner.
7. The use of accessory attachments, not sold or recommended by EURO­PRO Operating LLC may cause fire, electrical shock or risk of personal injury.
8. Extreme caution must be used when moving an appliance containing hot food, water or other liquids.
9. Use this appliance on a stable work surface away from water.
10. DO NOT remove the motor head before the chopping blades have stopped turning.
11. CAUTION! Chopping blades are sharp, handle with care, especially
when removing the blade from the bowl, emptying the bowl and during cleaning. When handling the
chopping blades, always hold by the plastic shaft.
12. DO NOT attempt to sharpen blades.
Page 3
3
NOTE: This unit has a short power
supply cord to reduce the risk resulting from becoming entangled in or tripping over a long cord. An extension cord may be used if you are careful in its use.
1. If using an extension cord, the
electrical rating of the extension cord should be rated at least 15 amperes. Extension cords rated for less amperage may overheat.
2. An extension cord must be arranged
so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over accidentally.
SAVE THESE INSTRUCTIONS
13. DO NOT expose containers to extreme temperature changes.
14. DO NOT use containers if they are cracked or chipped.
15. DO NOT use the appliance if chopping blades are bent or damaged.
16. Avoid contact with moving parts at all times. Keep hands, hair, clothing as well as spatulas and other utensils away from moving/cutting blades and containers during operation to prevent risk of severe personal injury and/or damage to the appliance. A scraper may be used but must be used only when the appliance is not running.
17. Exercise extreme caution when blending hot liquids.
18. Immediately release the On/Off pulse button on the motor head in the event that the appliance malfunctions during use.
19. To reduce the risk of injury, NEVER operate the appliance without the splash guard and bowl in place; DO NOT try to defeat the interlock mechanism; make sure that the cutting blades are properly assembled before operating the appliance.
20. DO NOT use outdoors.
21. DO NOT use appliance for other than intended use.
22. DO NOT operate the appliance for more than 15 seconds.
23. DO NOT operate the appliance empty.
24. If the appliance overheats, a thermal switch will become activated and shut off the motor. To reset, unplug the appliance and let it cool down for approximately 10 minutes before using again.
25. Be certain cover is secured in place before operating the appliance.
Page 4
4
THIS BOOK COVERS MODEL NUMBERS:
NJ100 30
NJ100GR 30
NJ100GN 30
NJ110GR 30
NJ100PR 30
NJ110WH 30
TECHNICAL SPECIFICATIONS
Voltage: 120V., 60Hz.
Power: 200 Watts
Bowl Capacity: 2 cups (16 ounces)
Page 5
5
Contents
Getting Started ......................................................................6
Using the Chopper Bowl ....................................................10
Cleaning and Maintenance ................................................12
Troubleshooting Guide .......................................................12
Warranty ................................................................................... 13
Registration .............................................................................15
Thank you for purchasing the Ninja® Express Chop™.
FEATU RE S:
• One touch pulse for precise control
• 16 oz. Processor Bowl - BPA Free
• Ninja® 4-blade technology
• Non slip Base
• Storage lid / splash guard
• Dishwasher safe parts
Page 6
6
Getting Started
e Processing Bowl with Non-Slip Base
f Spindle Pin
g Power Cord (not shown)
a On/Off Pulse Button
b Power Head
c Splash Guard / Storage Lid
d Ninja® 4-Blade
a
d
b
c
e
f
Page 7
7
200 Watt Power Head
The 200 watt power head operates on 120V., 60Hz. electrical power. NEVER allow
the power head to become wet when plugged into an electrical outlet.
W A R N I N G : The power head should never be immersed in water or any other liquid.
CAUTION: Make sure that the power head is unplugged from the electrical outlet and
that the blades have stopped turning before attaching or removing any accessory.
CAUTION: Blades are sharp! Handle with care, especially when removing the blade
from the bowl, emptying the bowl and during cleaning Use extreme caution when handling the blades. Always hold them by the shaft. Do not attempt to sharpen blades.
IMPORTANT: Never run the appliance empty.
The Ninja® Express Chop™ is an essential tool that is perfect for chopping and pureeing when preparing your favorite recipes. For best results, be sure to carefully read all the instructions contained in the manual before using this appliance.
Page 8
8
Using the Ninja® Express Chop
CAUTION: Blades are sharp! Use
extreme caution when handling the blades. Always hold them by the shaft.
IMPORTANT: Never run the appliance
empty.
1 Place the processor bowl on a clean,
dry, level surface.
2 Holding the chopping blade by the
shaft, carefully place it over the spindle pin inside the processing bowl. (Fig. 1)
IMPORTANT: Always assemble the
blades inside the container.
WARNI NG: DO NOT try to place the
blades onto the power head and then into the Ninja® Express Chop™.
3 Carefully spin the blade counter
clockwise to make sure that it has inserted properly. (Fig. 2)
4 Place the food ingredients into the
bowl.
IMPORTANT: Never add ingredients
into the processing bowl before placing the blade assembly in first.
CAUTION: DO NOT add more than 2
cups dry or 1 cup liquid ingredients as this may cause overflow.
5 Place the splash guard / storage lid on
the bowl. (Fig. 3)
CAUTION: DO NOT operate without
the splash guard in place.
6 Open the flap on the splash guard.
(Fig. 3)
Shaft
Fig. 1
Fig. 2
Fig. 3
Open Flap
Page 9
9
12 Make sure that the blades have
stopped completely before removing the power head.
13 If the ingredients stick to the side
of the processing bowl, stop the appliance, remove the power head and the splash guard. Use a spatula to dislodge the pieces and then replace the splash guard and the power head. Continue processing.
14 Remove the blade assembly by its shaft
before you empty the contents of the processing bowl.
15 Place the storage lid onto the top of
the processing blowl and close the flap to store. (Fig. 6)
HINTS & TIPS FOR USING YOUR NINJA®
EXPRESS CHOP™
• For mincing, chopping and pureeing, increase the length of pulses.
• For coarse chopping, use short, quick pulses and monitor food texture.
• Pre-cut larger pieces to make them fit into the processing bowl. When
chopping hard foods cut into 1-inch cubes.
7 Place the power head on top of the
splash guard making sure that it is securely in place. (Fig. 4)
8 To start the appliance, plug the power
cord into the electrical outlet, securely hold power head while operating and press on the on/off pulse button located on the top of the power head. (Fig. 5)
9 Hold the proccesing bowl firmly while
depressing the on/off pulse button to ensure the unit stays in place.
NOTE: DO NOT operate the appliance
continuously for more than 15 seconds at a time. Be careful not to over process. For coarsely chopped foods, use repeated short pulsing action until the desired consistency is reached.
10 To stop the appliance, remove your
fingers from the on/off pulse button.
11 In order to obtain a better quality of
chopping, operate the appliance by using the “pulse” method.
Fig. 4 Fig. 5 Fig. 6
Page 10
10
Cleaning and Maintenance
CAUTION: Make sure that the power head is unplugged from power source before
inserting or removing any attachment and before cleaning.
DO NOT immerse the power head into water or any other liquid. Clean with a damp
sponge or cloth and wipe dry.
The processing bowl, splash guard /storage lid, and chopping blade are all
dishwasher safe. It is recommended to place the storage lid and the chopping blade on the top rack. Use extreme caution when handling the chopping blades as they are very sharp.
Clean the Ninja® Express Chop™ and all parts before first use and immediately after
each use.
Please call customer service if any servicing needs to be performed on the appliance
at 1-877-646-5288.
To purchase replacement parts, please visit our website: www.ninjakitchen.com
or contact customer service: 1-877-646-5288.
PROBLEMS POSSIBLE REASONS & SOLUTIONS
Motor Doesn’t Start or Blades Don’t Rotate.
Check that the bottom of motor head is clean and
there is no food blocking connection when placing on containers.
There is too much food in the container.
The unit has overheated. Unplug and wait
approximately 10 minutes before using again.
Make sure the power head is securely placed on
splash guard.
Check that the plug is securely inserted into the
electrical outlet.
Check fuse or breaker. Replace fuse/reset
breaker.
Food is Unevenly Chopped.
Either you are chopping too much food at
one time, or the pieces are too big. Try cutting the food into smaller pieces of even size and processing smaller amounts per batch.
Food is Chopped Too Fine or is Too Watery.
The food has been over processed. Use brief
pulses or process for shorter time. Let blades stop completely between pulses.
Troubleshooting Guide
Page 11
11
Product Registration
Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja
®
product
within ten (10) days of purchase. You will be asked to provide the store name, date of purchase and
model number along with your name and address.
The registration will enable us to contact you in the unlikely event of a product safety notification. By
registering you acknowledge to have read and understood the instructions for use, and warnings set forth
in the accompanying instructions.
ONE (1) YEAR LIMITED WARRANTY
EURO-PRO Operating LLC warrants this product to be free from material defects and workmanship for
a period of one (1) year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and exceptions.
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been performed by a repair person not authorized by EURO-PRO Operating LLC.
If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete appliance and accessories, freight prepaid. For assistance with warranty service options or customer support, please call our customer care and product specialists at , call 1 (877) 646-5288 or visit our website www.ninjakitchen.com.
If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC will repair or replace it free of charge. Proof of purchase is required and a fee of $19.95 will apply to cover the cost of return freight. *
This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/ or conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the specific obligations expressly assumed by it under the terms of this Limited Warranty. In no event is EURO-PRO Operating LLC liable for incidental or consequential damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.
This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from province to province.
*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and to attach tag to item before packing with your name, complete address and phone number with a note giving purchase information, model number and what you believe is the problem with the item. We recommend you insure the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.
Page 12
12
12
Notes
Page 13
13
13
Notes
Page 14
14
Euro-Pro Operating LLC US: Newton, MA 02459 CAN: Ville St-Laurent, QC H4S 1A7
1-877-646-5288
www.ninjakitchen.com
Copyright © 2013 Euro-Pro Operating LLC
Printed in China
Illustrations may differ from actual product.
NJ100series.E.130612.3
Loading...