Ninja MBYC1014 Owner Manual

Download

Page 1

CP301

Series

OWNER’S GUIDE

ninjakitchen.com

Page 2

THANK YOU

for purchasing the Ninja® Hot & Cold Brewed System™

registeryourninja.com

1-877-646-5288

Scan QR code using mobile device

RECORD THIS INFORMATION

Model Number: ��

Serial Number: ��

Date of Purchase: �� (Keep receipt)

Store of Purchase: ��

THIS BOOK COVERS MODEL NUMBER:

CP301, CP301A, CP301BRN

TECHNICAL SPECIFICATIONS

Voltage: 120V~, 60Hz Power: 1550 Watts Water Reservoir Capacity: 50 Ounces

PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.

These instructions are designed to help you get a complete understanding of your new Ninja Hot & Cold Brewed System™.

If you have any questions, please call our Customer Service line at 1-877-646-5288.

TIP: You can ﬁnd the model and serial numbers on the QR code label located on the back of the unit by the power cord.

CONTENTS

Important Safeguards . . . . . . . . . . . . . . . . . . . . . . 2

Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Using the Control Panel. . . . . . . . . . . . . . . . . . . . . .6

Function Buttons. . . . . . . . . . . . . . . . . . . . . . . . . . 6

Operating Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 6

Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Before First Use . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . 8

Priming Your Ninja Hot & Cold Brewed System . . . . . . . . 9

High-Altitude Calibration. . . . . . . . . . . . . . . . . . . . 10

Preparing & Using the Ninja Hot & Cold Brewed System . . 11

How Much do You Get in Your Cup? . . . . . . . . . . . . . . . 11

Coee Measurement Chart . . . . . . . . . . . . . . . . . . . . 11

Tea Measurement Chart . . . . . . . . . . . . . . . . . . . . . 11

Filling the Coee Brew Basket . . . . . . . . . . . . . . . . . . 12

Filling the Tea Brew Basket . . . . . . . . . . . . . . . . . . . . 12

Automatic Drip Stop. . . . . . . . . . . . . . . . . . . . . . . . 13

Intelligent Warming Plate . . . . . . . . . . . . . . . . . . . . . 14

Brewing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Custom Brews: . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Classic & Rich . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Over Ice & Cold Brew . . . . . . . . . . . . . . . . . . . . . . 16

Signature Brew: . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Specialty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Setting the Delay Brew . . . . . . . . . . . . . . . . . . . . . . 17

Frothing Milk . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Care & Maintenance . . . . . . . . . . . . . . . . . . . . . . . 19

Cleaning After a Brew . . . . . . . . . . . . . . . . . . . . . . . 19

Cleaning Your Water Reservoir . . . . . . . . . . . . . . . . . 19

Cleaning Your Carafe . . . . . . . . . . . . . . . . . . . . . . . 19

Cleaning & Descaling Your Brewing System . . . . . . . . . .20

Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . 21

Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . 23

Product Registration . . . . . . . . . . . . . . . . . . . . . . 24

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

1ninjakitchen.com

Page 3

IMPORTANT SAFEGUARDS

HOUSEHOLD USE ONLY • READ ALL INSTRUCTIONS BEFORE USE

Read all instructions before using your NINJA

When using electrical appliances, basic safety precautions should always be followed, including the following:

HOT & COLD BREWED SYSTEM™

WARNING

To reduce the risk of ﬁre, electric shock, serious injury, death, or damage when using this appliance, follow these basic safety precautions.

General Precautions 1 DO NOT allow young children

to operate the appliance or use as a toy. Close supervision is necessary when any appliance is used near children.

2 To reduce the risk of electric

shock, this appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will ﬁt into a polarized outlet only one way. If the plug does not ﬁt fully into the outlet, reverse the plug. If it still does not ﬁt, contact a qualiﬁed electrician. DO NOT force into outlet or try to modify to ﬁt.

3 To protect against ﬁre, electric

shock, and injury to persons, DO NOT immerse cord, plugs, or body of machine in water or other liquid.

4 NEVER carry the appliance by the

power cord or yank it to disconnect from electrical outlet; instead grasp the plug and pull to disconnect.

5 DO NOT operate any appliance

with a damaged cord or plug, or after the appliance malfunctions, or has been dropped or damaged in any manner. Contact SharkNinja Operating LLC for service.

6 For household and counter top use

only. DO NOT let the power cord hang over the edge, or touch hot surfaces such as the stove.

7 To avoid risk of ﬁre, electrical shock,

or damage to the unit, DO NOT store or use unit in an appliance garage or under a wall cabinet.

8 Unplug from outlet when not in

use and before cleaning. Allow to cool before putting on or taking o parts, and before cleaning the appliance.

Operating Notice 9 The use of an accessory

not recommended by the manufacturer may create an overﬂow condition and scalding hazard, or result in ﬁre, electric shock, or personal injury.

10 ALWAYS use appliance on a clean,

dry, level surface.

11 DO NOT place on or near a hot

gas or electric burner or in a heated oven.

12 DO NOT use this appliance for

anything other than its intended use. DO NOT use outdoors.

13 DO NOT touch hot surfaces.

Use handles orknobs.

14 To avoid contact with steam and

hot surfaces, DO NOT reach across top of brewer to froth.

15 ALWAYS place a vessel beneath

the brew basket to receive the brewed coee or tea.

16 Scalding may occur if brew

basket is opened during a brew or clean cycle.

17 DO NOT remove the vessel

while the appliance is running without the Drip Stop in the closed position. Return the vessel quickly and open the Drip Stop to continue the brew.

18 DO NOT overﬁll the water

reservoir. Fill water only to the Max Fill line.

19 DO NOT run the appliance

without water.

20 Maximum brew basket capacity

is 14 rounded tablespoons or 7 Ninja Big Scoops. Exceeding this amount or using ﬁne ground coee may cause overﬂow.

Glass Carafe 21 The carafe is designed for use with

this appliance only. DO NOT place carafe on or near a hot gas or electrical burner, or in a heated oven.

22 DO NOT set a hot carafe on a wet or

cold surface.

23 DO NOT use a cracked or scratched

carafe or a carafe that has a loose or weakened handle.

24 DO NOT clean carafe with abrasive

cleaners, steel wool pads, or other abrasive materials.

25 DO NOT place carafe in microwave. 26 DO NOT expose carafe to extreme

temperature changes.

27 DO NOT drink directly from the

carafe. Liquid from the carafe may be very hot.

28 DO NOT use the carafe to store food

when not in use.

29 Ensure the carafe is completely

empty before starting a cleaning or brewing cycle. Starting a cycle with water, coee, or tea in the carafe will cause an overﬂow.

Care & Maintenance 30 Allow the appliance to cool

before removing any parts and before cleaning.

31 To prevent illness from bacterial

growth in the appliance, follow all cleaning instructions in the Care & Maintenance section of this Owner’s Guide.

32 Clean the system on a weekly basis. 33 If the product is not operating

properly, visit ninjakitchen.com or contact SharkNinja Operating LLC at 1-877-646-5288 for examination, repair, or adjustment.

Cord Statement 34 A short power-supply cord is

provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord.

35 DO NOT use extension cords with

this product.

SAVE THESE INSTRUCTIONS

2 3ninjakitchen.com

Page 4

PARTS

A Brewer

(power cord & storage not shown)

B Flip-Top Water Reservoir Lid

C Removable Water Reservoir

D Showerhead

E Control Panel

F Single-Serve Cup Platform

G Swinging Brew Basket

H Removable Tea Filter Holder

I Tea Permanent Filter

J Removable Coee Filter Holder

K Coee Permanent Filter

L Integrated Frother

M Frother Whisk

N Brew-Through Lid

O Ninja® Glass Carafe

P Ninja Smart Scoop™

Q Intelligent Warming Plate

COFFEE TEA

4 5ninjakitchen.com

Page 5

USING THE CONTROL PANEL

FEATURES

of the Ninja® Hot & Cold Brewed System™

1 Programmable

Digital Clock

2 Hour & Minute Buttons

3 Drip Stop Button

4 Stay Warm Button

5 Delay Brew Button

6 Tea Mode Indicator

7 Coee Mode Indicator

8 Multi-Serve Dial

a Cup b XL Cup c Travel Mug d XL Multi-Serve

e Half Carafe f Full Carafe

9 Progress Bar

10 Custom Brew Types

Classic Brew Rich Brew Over Ice Brew

Cold Brew

11 Ninja® Signature Brew

Specialty Brew

12 Tea Types

Herbal

Black Oolong White

Green

13 Tea Button

14 Start/Select Dial

15 Intelligent Clean Cycle

Indicator/Button

16 Power Button

• Coee & Tea Brewing – Brew coee and

steep tea with one machine.

• Two Removable Filter Holders – Specially designed baskets for coee and tea to keep the ﬂavors separate.

• Smart Basket Sensing – The Ninja Hot & Cold Brewed System automatically knows which ﬁlter holder has been placed in the brew basket. The control panel will change between Coee & Tea settings depending on which ﬁlter holder is inserted into the brew basket.

• Coee Permanent Filter – A reusable ﬁlter that preserves the natural coee oils and small coee particles to provide a robust ﬂavor, similar to what you would experience when using a French press.

• Tea Permanent Filter – Specially designed to deliver the right amount of ﬂavor from your tea.

• Tea Type Selection – Choose between Herbal, Black, Oolong, White, or Green tea.

• Thermal Flavor Extraction

Unlocks the full ﬂavor potential of your coee and tea by combining precision water delivery with automated controls for calibrated temperature, pre-infusion, saturation, and ﬂavor richness.

• Auto-iQ® – The Ninja Hot & Cold Brewed System knows how much water to use, and at what temperature, for each size and brew type—both coee & tea.

• Brew Sizes – Brew directly into your favorite cup, travel mug, or carafe.

• Brew Types – Control the strength and style of your coee or tea:

• Classic Brew for smooth, balanced,

traditional ﬂavor.

• Rich Brew for a richer, never-bitter ﬂavor

that stands up to milk, cream, or ﬂavoring.

• Over Ice Brew for a smooth, rich,

freshly brewed iced coee or tea that’s not watered down.

• Cold Brew is brewed at a lower

temperature and for a longer time over ice for an ultra-smooth, deep, naturally sweet, refreshing coee or tea.

• Specialty Brew is a super-rich

concentrate used to make coee-based drinks like a cappuccino or latte, or teabased beverages like chai or matcha.

Technology –

• Single-Serve Cup Platform – Pull down

the platform to brew directly into your favorite cup or mug.

• Removable Water Reservoir with Easy-Access Flip-Top Lid

– For quick and easy ﬁlling.

• Stay Warm Button – Your warming plate will automatically turn on after brewing a carafe on Classic or Rich Brew, and turn o after 2 hours. The Stay Warm button allows you to manually turn o the warming plate.

• Adjustable Intelligent Warming Plate – Automatically adjusts the temperature of the warming plate to keep your coee or tea at the ideal drinking temperature without burning it. Adjust to stay on for up to four hours.

• 24-Hour Programmable Delay Brew – Easily schedule automatic brewing.

• Automatic Drip Stop – The drip stop automatically closes after a brew is complete. Press the Drip Stop button

to sneak a cup, then press the Drip

Stop button again to ﬁnish the brew.

• Clean Function – When your system senses there is hard-water calcium buildup that can aect the ﬂavor of your coee and tea, the CLEAN light will illuminate. Follow the cleaning instructions in the Care & Maintenance section.

• High-Altitude Calibration – The calibration brew automatically adjusts your brewer’s boiling point based on the conditions where you live to achieve a consistent brew.

• Auto Shut- O – Your unit will automatically power o after one hour of inactivity.

Brew into a cup, travel mug, or carafe.

Cup

Travel Mug or XL Sizes

Half Carafe

or Full Carafe

6 7ninjakitchen.com

Page 6

BEFORE FIRST USE

PRIMING YOUR NINJA HOT & COLD BREWED SYSTEM™

PLEASE KEEP THIS IMPORTANT SAFEGUARD IN MIND WHEN USING THE APPLIANCE:

IMPORTANT: DO NOT run the appliance without water.

1 Remove all packaging material and stickers from the brewer.

2 Wash the water reservoir, glass carafe, removable ﬁlter holders, and coee

and tea permanent ﬁlters in warm, soapy water with a soft cloth.

3 Rinse parts and dry thoroughly.

4 Before ﬁrst use, prime the system by running two Full Carafe, Classic Brew

cycles with water only. After each cycle is complete, discard the water.

SETTING THE CLOCK

1 Plug the power cord into an electrical outlet. The clock will ﬂash on the

control panel to indicate that the time has not been set (Fig. 1).

2 Press the hour (H) or minute (M) button until you reach the current time.

The AM or PM indicator will illuminate on the left side of the display as you are setting the time.

3 After 5 seconds, the clock will stop ﬂashing and the clock will be set.

1 To ﬁll the water reservoir, use the

hand grips to lift it to the right and up o the brewer (Fig. 2). Flip the reservoir lid open or remove the entire lid, then add fresh, ﬁltered water up to, but not exceeding, the Max Fill line (Fig. 3). Return the water reservoir to the brewer (Fig. 4). DO NOT ﬁll water reservoir with anything other than water, as other liquids may damage your brewer.

Fig. 2

2 Ensure one of the removable ﬁlter

holders is nested inside the brew basket (Fig. 5). Once in place, slide the brew basket all the way in until you hear a slight click (Fig. 6).

Fig. 5

NOTE: If the clock stops ﬂashing and does not display the correct time

of day, pressing the hour (H) or minute (M) button at any time will cause the clock to ﬂash again. You can now reprogram the correct time by following the previous steps.

NOTE: If you unplug the brewer or in the event of an extended power loss, you will need to reset the clock the next time the brewer is plugged in.

Fig. 1

Fig. 4

Fig. 3

Fig. 6

9ninjakitchen.com8

Page 7

PRIMING YOUR NINJA HOT & COLD BREWED SYSTEM™ – CONT.

PREPARING & USING THE NINJA HOT & COLD BREWED SYSTEM™

3 Twist the brew-through lid clockwise

onto the carafe to lock into place (Fig. 7) and center the carafe below the brew basket (Fig. 8).

NOTE:

Do not place any ground coee or tea in the brew basket for the ﬁrst two cycles.

4 Once all parts are securely in place

and the unit is powered on, select the Full Carafe size and Classic Brew setting, then press the START/SELECT dial (Fig. 9).

5 When the cycle is complete, discard

the water in the carafe. Repeat, beginning with step 1. You are now ready to use your Ninja Hot & Cold Brewed System to brew.

Fig. 7

Fig. 8

Fig. 9

HIGH-ALTITUDE CALIBRATION

(OPTIONAL, BUT RECOMMENDED FOR USERS IN HIGH-ALTITUDE AREAS)

Because water boils at lower temperatures at higher altitudes, running a calibration cycle before your ﬁrst brew allows the unit to detect the boiling point of water at your location. Running a calibration cycle will help deliver a consistent brew each time.

1. Fill the water reservoir up to, but not exceeding, the Max Fill line.

2. Place an empty ﬁlter holder into the brew basket, and an empty vessel in the machine.

3. Press and hold both the Drip Stop button the clock display begins a two-minute countdown.

4. A calibration cycle will begin. When complete, the unit will beep and End will appear on the clock display. Discard the water in the vessel.

NOTE: Pressing the Drip Stop button Tea button , or Power button will cancel the calibration cycle.

and the Tea button until

HOW MUCH DO YOU GET IN YOUR CUP?

Each size and brew type produces a dierent amount of coee and tea to optimize strength and taste.

NOTE:

The coee grounds and tea will absorb some of the water that is

brewed, resulting in slightly less brewed coee or tea than water used.

APPROXIMATE BREW VOLUMES

Size Classic Rich

Cup 9.5 oz. 8.7 oz. 4.8 oz. 9.5 oz.

XL Cup 11.5 oz. 10.3 oz. 5.8 oz. 11.5 oz.

Travel Mug 14 oz. 13.2 oz. 7.0 oz. 14 oz.

XL Multi-Serve 18 oz. 16 oz. 9.0 oz. 18 oz.

You don’t need to adjust the size for Specialty Brew—it always yields 4 oz. of coee and 6 oz. of tea (with the exception of Green tea, which yields 2 oz.).

coee/tea only ﬁlled with ice

Over Ice & Cold Brew

COFFEE MEASUREMENT CHART TEA MEASUREMENT CHART

Serving Size

Cup/XL Cup

Travel Mug/

XL Multi-Serve

Half Carafe

Full Carafe

Specialty (4 oz.)

NOTE: For Cold Brew coee,

Ninja

Smart

™

Scoop

2–3 small

scoops

3–5 small

scoops

3–4 big

scoops

4–6 big

scoops

2 big scoops 4 Tbsp.

Tablespoons

2–3 Tbsp.

3–5 Tbsp.

6–8 Tbsp.

8–12 Tbsp.

Serving Size

Cup/XL Cup 1 small scoop 1 tea bag

Travel Mug/

XL Multi-Serve

Half Carafe

Full Carafe

Specialty

(6 oz.)*

* With th e exception of Specialty Green tea,

which yields 2 oz.

Ninja

Smart Scoop

Loose Leaf Tea

1-2 small scoops 2 tea bags

2–3 small scoops 4 tea bags

3–4 small scoops 6 tea bags

1 big scoop 3 tea bags

™

Tea Bags

add one extra scoop.

NOTE: Exceeding the

recommended medium grind size for whole beans may cause the brew basket to overﬂow.

10 11ninjakitchen.com

Page 8

PREPARING & USING THE NINJA HOT & COLD BREWED SYSTEM™

FILLING THE COFFEE BREW BASKET

For best results, use the coee measurement chart to determine how much ground coee to use for each brew size. The amount of ground coee for each size will remain the same for any brew type you select. For example, if you select Cup and Classic Brew, you will use the same amount of coee grounds as if you select Cup and Over Ice Brew. The only exception is Cold Brew, which requires one extra scoop of coee, regardless of the size.

1 Open the brew basket by sliding it

out of the brewer (Fig. 10). Ensure you have the COFFEE ﬁlter holder in the machine, denoted by the orange handle with the coee bean icon.

2 Place the coee permanent ﬁlter

or a #4 paper cone ﬁlter in the COFFEE ﬁlter holder. If using a paper ﬁlter, ﬁrst ensure the permanent ﬁlter is removed from the ﬁlter holder. Then fold the paper ﬁlter along the seams, open it fully, and ﬁrmly press it into the ﬁlter holder making sure it is fully seated (Fig. 11).

3 Use the Ninja Smart Scoop™

and follow the measurements in the chart to ﬁll the brew basket (Fig. 12). These measurements are based on level scoops—adjust to your preferred taste. We suggest using a medium-sized grind if grinding whole beans.

4 Slide the brew basket back into the

brewer until it clicks into place.

FILLING THE TEA BREW BASKET

For best results, use the tea measurement chart to determine how many tea bags or how much loose leaf tea to use for each brew size. The amount of tea for each size will remain the same for any brew type you select.

1 Open the brew basket by sliding it

out of the brewer (Fig. 10). Ensure you have the TEA ﬁlter holder in the machine, denoted by the green handle with the tea leaf icon.

2 Place the tea permanent ﬁlter in the

TEA ﬁlter holder (Fig. 11). When using tea bags, you may remove the tea permanent ﬁlter if more space is needed in the brew basket.

3 Use the Ninja Smart Scoop™

and follow the recommended measurements in the chart to ﬁll the brew basket, adjusting to your preferred taste (Fig. 12).

4 Slide the brew basket back into the

brewer until it clicks into place.

Fig. 10

or or

COFFEE TEA

Fig. 11

Fig. 12

AUTOMATIC DRIP STOP

The system is equipped with an automatic drip stop. When the Drip Stop button

is illuminated, the drip stop is closed and no coee or tea will ﬂow out of the brew basket.

When brewing a half or full carafe, press the Drip Stop button

to pause the brew cycle and pour a cup. Promptly replace the carafe and press the Drip Stop button

again to

complete the brew (Fig. 13a).

NOTE: If you forget to press the Drip Stop button to resume the brew, the unit will pause the brew, and after 30 seconds it will give you a friendly audible reminder. After 5 minutes, the brew will be canceled.

DRIP STOP TIME SETTTING

After a brew is complete, the drip stop will automatically close. Some types of coee, such as ﬁnely ground or decaf, can take a little longer to fully drain from the brew basket. To extend the amount of time the drip stop remains open after a brew, follow these instructions:

1 Press and hold the Drip Stop button

(Fig. 13a) until the clock display ﬂashes either dFLt (default) or the previously speciﬁed time.

2 Press either the hour (H) or minute

(M) button until the desired extension time is shown: dFLt (default), :15 (+15 seconds), :30 (+30 seconds), :45 (+45 seconds), :60 (+60 seconds), or OFF (Fig. 13b).

NOTE: When OFF is selected, the drip stop will remain open after a brew is complete. You can close the Drip Stop at any time by pressing the Drip Stop button again. dFLt (default) is the machine’s default time setting.

3 Press the Drip Stop button

to set the new time. Or wait 5 seconds, and the unit will beep, signifying that the new extension time has been set.

Fig. 13a

Fig. 13b

12 13ninjakitchen.com

Page 9

PREPARING & USING THE NINJA HOT & COLD BREWED SYSTEM™

Fig. 14

PREPARING & USING THE NINJA HOT & COLD BREWED SYSTEM™

Fig. 15a

Fig. 16bFig. 16aFig. 15b

INTELLIGENT WARMING PLATE

The Intelligent Warming Plate will automatically turn on during a Half or Full Carafe size of Classic or Rich Brew. The Intelligent Warming Plate will adjust the heat it produces to avoid burning the coee over time.

IMPORTANT: The HOT SURFACE light will illuminate when the warming plate is hot.

STAY WARM BUTTON

Press STAY WARM after the brew to turn the Intelligent Warming Plate o. You can turn the Intelligent Warming Plate back on by pressing STAY WARM again (Fig.14).

TIME & TEMPERATURE ADJUSTMENT

You can adjust how long the Intelligent Warming Plate remains on (up to 4 hours) and/or set the temperature to High or Low.

By default, the Intelligent Warming Plate is set to remain on for 2 hours, and is set to High to keep your coee and tea hot. The Low setting keeps your brew at a slightly lower temperature to preserve ﬂavor longer.

NOTE: The setting you choose will apply to both Coee and Tea.

To change the time/temperature settings of your warming plate, follow these instructions:

1 Press and hold STAY WARM until

the clock begins to ﬂash the current warming time.

2 Quickly press the hour (H)

and/or minute (M) buttons to increase the time up to 4 hours or decrease the time to 0 hours. Press STAY WARM to set the new time. Or wait 5 seconds, and the unit will beep, signifying the new time has been set.

3 Next, the clock will display the

current warming plate temperature. To keep the same temperature, press STAY WARM, or wait 5 seconds for the same temperature to lock in. To change the temperature, press the hour (H) or (M) buttons, then press STAY WARM, or wait 5 seconds for the temperature to lock in.

NOTE: If you set the warming time to 0 hours, it will skip the warming temperature menu.

BREWING

NOTE: Some brews have a pre-infusion

cycle with varying times. The brewing cycle will begin, then there will be a pause for a short period before resuming. This process is used to evenly saturate the coee grounds or tea.

CUSTOM BREWS

CLASSIC BREW & RICH BREW

NOTE: Rich Brew will use slightly less water and yield slightly less brewed coee or tea than Classic Brew.

1 After ﬁlling the water reservoir,

place either the COFFEE or TEA ﬁlter holder into the brew basket. Add the ground coee, loose leaf tea, or tea bags to the ﬁlter.

2 Close the brew basket, ensuring

it is securely in place. The control panel will display either COFFEE (Fig. 15a) or TEA (Fig. 15b) settings based on the ﬁlter holder that has been inserted.

NOTE: If the brew basket is closed with no ﬁlter holder in place, both COFFEE and TEA will ﬂash.

3 Use the Multi-Serve dial to select

the brew size. Place the empty vessel you would like to brew into under the brew basket.

NOTE: If making a single cup, lower the Single-Serve Cup Platform and set your vessel in the center of it. Please ensure you are using at least a 12 oz. cup for the Cup size, 14 oz. cup for the XL Cup size, 16 oz. travel mug for the Travel Mug size, and 20 oz. travel mug for the XL Multi-Serve size.

4 Turn the START/SELECT dial to

choose either Classic Brew or Rich Brew (Fig. 16a, Fig. 16b). If brewing tea, press the Tea button

to toggle to the tea menu, and use the dial to choose your tea type. To change your brew style while in the tea menu, press the Tea button

again.

5 Press the START/SELECT dial to

start the brew. A progress bar on the control panel will show the status of the brewing cycle. To cancel the brew at any time, press the dial again or press the Power button.

6 The unit will beep and the clock

will display End when the brew is complete.

14 15ninjakitchen.com

Page 10

PREPARING & USING THE NINJA HOT & COLD BREWED SYSTEM™

Fig. 17a Fig. 17b Fig. 18

OVER ICE BREW & COLD BREW

NOTE: Cold Brew takes about 15

minutes for a Full Carafe.

NOTE: Glassware may be used

with the Cold Brew setting, but not the Over Ice Brew setting.

1 After ﬁlling the water reservoir,

insert either the COFFEE or TEA ﬁlter holder into the brew basket. Add the ground coee, loose leaf tea, or tea bags to the ﬁlter.

NOTE: For COLD BREW coee ONLY, add an additional scoop of coee grounds to the brew basket.

2 Close the brew basket, ensuring

it is securely in place. The control panel will display either COFFEE (Fig. 15a) or TEA (Fig. 15b) settings based on the ﬁlter holder that has been inserted.

3 Fill your desired vessel to the top with

ice cubes and place the vessel below the brew basket. Use the Multi-Serve dial to select the brew size.

NOTE: DO NOT add ice to the water reservoir.

4 Turn the START/SELECT dial to

choose either Over Ice Brew or Cold Brew (Fig. 17a, Fig. 17b). If brewing tea, press the Tea button

to toggle to the tea menu, and use the dial to choose your tea type. To change your brew style while in the tea menu, press the Tea button

5 Press the START/SELECT dial to

start the brew. A progress bar on the control panel will show the status of the brewing cycle. To cancel the brew at any time, press the dial again or press the Power button.

6 The unit will beep and the clock will

display End when the brew is complete.

SIGNATURE BREW

SPECIALTY BREW

NOTE: Specialty always yields 4 oz. of coee and 6 oz. of tea (with the exception of Green tea, which yields 2 oz.).

1 After ﬁlling the water reservoir,

insert either the COFFEE or TEA ﬁlter holder into the brew basket. Add the ground coee, loose leaf tea, or tea bags to the ﬁlter.

2 Close the brew basket, ensuring

it is securely in place. The control panel will display either COFFEE (Fig. 15a) or TEA (Fig. 15b) settings based on the ﬁlter holder that has been inserted.

3 Place the empty vessel you would like

to brew into under the brew basket.

NOTE: If brewing an iced blended drink, ﬁll the desired vessel with the amount of ice recommended in the recipe before brewing.

4 Turn the START/SELECT dial to

choose SPECIALTY (Fig. 18). If brewing tea, press the Tea button

to toggle to the tea menu, and use the dial to choose your tea type. To change your brew style while in the tea menu, press the Tea button

again.

5 Press the START/SELECT dial to

start the brew. A progress bar on the control panel will show the status of the brewing cycle. To cancel the brew at any time, press the dial again or press the Power button.

NOTE: The brewing cycle will begin, then pause for a short period before resuming. This process is used to evenly saturate the coee grounds or tea.

6 The unit will beep and the clock

will display End when the brew is complete.

SETTING THE DELAY BREW

NOTE: The unit must remain on for the

Delay Brew function to work. DO NOT power o after setting Delay Brew.

1 Turn the unit on by pressing the

Power button.

NOTE: The clock will remain on even if the unit is turned o. Ensure the unit is powered on to set Delay Brew.

2 After ﬁlling the water reservoir and

adding ground coee or tea to the correct ﬁlter holder, be sure the reservoir, brew basket, and ﬁlter are securely in place. Place the appropriate-size vessel under brew basket.

NOTE: The brew basket must be securely closed with either the COFFEE or TEA ﬁlter inserted to set Delay Brew.

16 17ninjakitchen.com

Page 11

PREPARING & USING THE NINJA HOT & COLD BREWED SYSTEM™ - CONT.

CARE & MAINTENANCE

Fig. 20 Fig. 21 Fig. 22

3 Press DELAY BREW. DELAY BREW

will illuminate and the clock will begin to ﬂash “12:00” or the last Delay Brew time that was set (Fig. 19).

4 While the clock is ﬂashing, press

the hour (H) or minute (M) button to set the time that you would like the Delay Brew to begin. The AM or PM indicator will illuminate on the left side of the display as you are setting the desired time.

5 Once the proper time has been set,

select the size of the vessel that you would like to brew into.

6 Turn the START/SELECT dial to

choose your brew style. If brewing tea, press the Tea button

to toggle to the tea menu, and use the bottom dial to choose your tea type. To change your brew style while in the tea menu, press the Tea button

Fig. 19

again.

7 Once the time, brew size, brew

style, and tea type (if applicable) have been set, allow DELAY BREW to stop ﬂashing, or press DELAY BREW to activate. When activated, the unit will beep and DELAY BREW and your selected options will remain illuminated. To cancel, press DELAY BREW again.

NOTE: If you attempt to change your selections while Delay Brew is set, the unit will beep and DELAY BREW will ﬂash. To change your selections, cancel the Delay Brew.

FROTHING MILK

1 Pour milk into cup, until it is about

/3 full. (Use more or less milk depending on your preference.) Microwave for 45 to 60 seconds for hot milk.

2 Move the frother into the ready

position by swinging the arm toward the front.

3 Hold the cup under the frother and

submerge the whisk just below the surface of the milk. This allows air to fold into the milk for the frothiest results (Fig. 20).

4 Press and hold the frothing button

for 30 to 45 seconds (Fig. 21).

5 You can easily remove the frother

whisk by twisting it clockwise. To avoid spills, keep your cup below the whisk and carry it to your sink or dishwasher for cleaning (Fig. 22).

CLEANING AFTER A BREW

NOTE: For best results, we

recommend rinsing the reservoir after brewing and reﬁlling with fresh water for the next brew.

1 After the unit has cooled, remove the

ﬁlter holder from the brew basket. If using a paper coee ﬁlter, discard it. If using either the coee or tea permanent ﬁlter, wash it thoroughly with soap and warm water or place on top rack of dishwasher.

2 Clean the frother whisk after each

use. Hand-wash thoroughly or place on top rack of dishwasher.

3 Wash the carafe and brew-through

lid with soap and warm water. Use a bottle brush or a cloth to wash the inside of the carafe. DO NOT use a wire brush.

NOTE: The glass carafe, brew-through lid, coee and tea permanent ﬁlters, removable ﬁlter holders, water reservoir, ﬂip-top lid, frother whisk, and scoop are top-rack dishwasher safe.

4 After the brewer has cooled, wipe

down the main unit, showerhead, and water reservoir shelf with a cloth and warm water. DO NOT immerse the brewer in water.

CLEANING YOUR WATER RESERVOIR

Empty the water reservoir and handwash or place in your dishwasher.

CLEANING YOUR CARAFE

We recommend cleaning your carafe with warm, soapy water.

If you want to clean the carafe more thoroughly, we recommend using a soft foam brush. DO NOT use a wire brush.

Fig. 23

19ninjakitchen.com18

Page 12

TROUBLESHOOTING GUIDECARE & MAINTENANCE - CONT.

CLEANING & DESCALING YOUR BREWING SYSTEM

The CLEAN button will illuminate when a cleaning cycle is recommended for your unit, as calcium scale buildup could be aecting the ﬂavor of your coee or tea.

To clean and descale your Ninja

Hot & Cold Brewed System™:

NOTE: The clean cycle takes approximately 60 minutes.

1 Select the Full Carafe size and

set the empty carafe beneath the brew basket.

2 Use a descaling solution speciﬁcally

formulated for coeemaker cleaning and follow the directions on the package. Fill the water reservoir up to, but not exceeding, the Max Fill line (50 oz.).

Fill the water reservoir to the Travel

Mug line (16 oz.) with white vinegar, then ﬁll the rest of the reservoir with water up to, but not exceeding, the Max Fill line.

IMPORTANT:

Use only white vinegar.

3 Once the water reservoir is ﬁlled

with your cleaning solution and water mixture, press the CLEAN button (Fig. 23).

NOTE: To cancel the clean cycle, press the Power button or CLEAN button once. The unit will beep and stop brewing through the cleaning mixture. Continue to follow the instructions starting at Step 6.

IMPORTANT: If you cancel the

clean cycle, your machine will not be properly descaled.

4 The clock will display and count

down the remaining clean cycle time, which takes approximately 60 minutes to complete. Your unit will deliver a small amount of cleaning solution to distribute it through the system. It will then pause, deliver additional cleaning solution, and continue for 60 minutes. The extended pauses allow for maximum cleaning and descaling.

IMPORTANT: DO NOT remove the

carafe at any time throughout the clean cycle.

5 Upon completion, the brewer will

beep, the clock will display End, and the CLEAN light will turn o.

6 Empty and thoroughly clean the

carafe and water reservoir with warm, soapy water to remove any cleaning solution that could aect the ﬂavor of your coee or tea.

7 Fill the reservoir with fresh water

up to, but not exceeding, the Max Fill line and set the empty carafe beneath the brew basket.

8 Flush the system by running a Full

Carafe, Classic Brew cycle with water only. After the cycle is complete, discard the water and thoroughly clean the carafe.

NOTE: If the CLEAN light illuminates again, then calcium buildup is still present. Repeat the cleaning cycle instructions from the beginning, and the CLEAN light will automatically turn o when your brewer is clean.

There’s sediment in my coee.

•

If using a permanent ﬁlter, the sediment at the bottom of the brewed coee may be due to using ﬁnely ground coee.

•

To reduce the amount of sediment in the brewed coee, use a slightly coarser grind or use a paper ﬁlter.

NOTE: We DO NOT recommended using a paper ﬁlter in conjunction with the

permanent ﬁlter, as clogging and backing up of water and/or coee in the ﬁlter basket can occur.

OVER ICE Brew and COLD BREW are not cold.

• Ensure your cup, travel mug, or carafe is ﬁlled all the way to the top with ice cubes before brewing. Your Ninja Hot & Cold Brewed System™ will brew at elevated temperatures to lock in the best ﬂavor, then the ice will cool the brewed coee or tea to the perfect temperature.

Coee or tea is too weak.

• COFFEE: For stronger coee, use the RICH brew setting, try darker roast beans, or use the permanent ﬁlter rather than a paper ﬁlter. If you want an even bolder ﬂavor, you can add more coee grinds to the brew basket. Additional grinds do absorb liquid, so you will have a more concentrated, smaller cup of coee.

• TEA: For stronger tea, use the RICH brew setting, or add more tea to the brew basket.

Coee or tea is too strong.

• COFFEE: For milder coee, use the CLASSIC brew setting, use lighter roast beans, or use a paper ﬁlter rather than the permanent ﬁlter. If you want an even milder ﬂavor, you can put fewer coee grinds in the brew basket.

• TEA: For milder tea, use the CLASSIC brew setting, or use less tea in the brew basket.

Brew cycle is too slow.

• Depending on your settings, your brew time will vary from around 4 minutes to 18 minutes. The progress bar on the control panel will indicate brew status.

Cup or travel mug overﬂowed.

• Ensure you are using at least a 12 oz. cup for the Cup size, 14 oz. cup for the XL Cup size, 16 oz. travel mug for the Travel Mug size, and 20 oz. travel mug for the XL Multi-Serve size.

Brew basket overﬂowed.

• The bottom of the ﬁlter holder may be clogged. This can happen with ﬁnely ground coee or too many coee grinds in the brew basket. Medium-ground coee is recommended.

NOTE: When using a paper ﬁlter, do not use the permanent ﬁlter.

20 21ninjakitchen.com

Page 13

TROUBLESHOOTING GUIDE - CONT.

REPLACEMENT PARTS

There’s water left in my reservoir.

• The water reservoir markings are minimum ﬁll lines that indicate the amount of water needed for that brew size. However, all brew styles use dierent amounts of water to create the proper ﬂavor and concentration, leaving some water to remain.

My Ninja Hot & Cold Brewed System is leaking.

• After removing the water reservoir, there may be a small amount of water in the reservoir valve. This can be easily removed with a dry cloth.

• If the leak is coming from the brew basket, make sure all parts are assembled correctly and securely. If the leak is coming from the bottom of the brewer, call Customer Service at 1-877-646-5288.

CLEAN light is on.

• Run a clean cycle. If you have recently completed a clean cycle, you may need to run a second cycle to remove additional mineral buildup that occurs naturally over time.

There’s no Rooibos or Pu’erh tea type setting.

• Use the Herbal tea setting for Rooibos and the Black tea setting for Pu’erh.

CLOCK DISPLAY MESSAGES:

“Add” “Wtr”

• The system does not have enough water in the reservoir to complete your brew. Add fresh water to the reservoir and then press the START/SELECT dial to resume.

“CLn”

• The system has detected that a clean cycle needs be run immediately to remove calcium scale buildup in the boiler. See ‘Cleaning & Descaling Your Brewing System’ for instructions.

To order additional parts and accessories, visit ninjaaccessories.com or contact Customer Service at 1-877-646-5288.

“Hot” “Wtr”

• The system has detected that hot water has been added to the water reservoir. Remove the reservoir and empty the hot water. Reﬁll the reservoir with fresh, cool water and return it to the base of the system. Wait until the display no longer shows “Hot” “Wtr” before using the system again.

ERROR MESSAGES:

“Er”

• If the clock displays “Er” and then a number (ex. “Er 03”), contact Customer Service at 1-877-646-5288.

22 23ninjakitchen.com

Page 14

PRODUCT REGISTRATION

Please visit registeryourninja.com or call 1-877-646-5288 to register your new Ninja® product within ten (10) days of purchase. You will be asked to provide the store name, date of purchase, and model number along with your name and address.

The registration will enable us to contact you in the unlikely event of a product safety notiﬁcation. By registering, you acknowledge you have read and understood the instructions for use and warnings set forth in the accompanying instructions.

ONE (1) YEAR LIMITED WARRANTY

The 1-Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.

SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of 1 year from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in this instruction manual, subject to the following conditions and exclusions.

What is covered by my warranty?

1. The original unit and/or non-wearable components deemed defective, in SharkNinja’s sole discretion, will be repaired or replaced for up to 1 year from the original purchase date.

2. In the rare event that a replacement unit is issued, the warranty coverage ends 6 months after the receipt date of the replacement unit or the remainder of the existing warranty, whichever is greater. If the unit is replaced, SharkNinja reserves the right to replace the unit with one of equal or greater value.

What is not covered by my warranty?

Our Customer Service and Product Specialists are available to provide all the warranty service options available to you, including the possibility of upgrading to our VIP Warranty Service Options for select product categories.

1. Normal wear and tear of wearable parts (including ﬁlter holders, permanent ﬁlters,

frother whisk, carafe and brew-through lid, water reservoir and ﬂip-top lid, and Ninja Smart Scoop™) that require regular maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by your warranty.

2. Any unit that has been tampered with or used for commercial purposes.

3. SharkNinja will cover the cost for the customer to send the unit to us for repair or replacement. A fee of $19.95 for return shipping costs will be charged at the time of return shipment of the repaired or replacement unit.

4. Damage caused by misuse, abuse, or negligent handling, or damage due to mishandling in transit.

5. Consequential and incidental damages.

6. Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the product or any of its parts that have been performed by a repair person not authorized by SharkNinja.

7. Products purchased, used, or operated outside of North America.

Problems with your unit/How to get service:

If your appliance fails to operate properly while in use under normal household conditions within the warranty period, visit ninjakitchen.com for product care/maintenance self-help. Our Customer Service and Product Specialists are also available at 1-877-646-5288 to assist with product support and warranty service options.

How to initiate a warranty claim:

You can call 1-877-646-5288 to have a Customer Service Specialist assist you. Please note, you must call 1-877-646-5288 to initiate a warranty claim. Return and packing instruction information will be provided at that time.

For Customer Service hours, visit ninjakitchen.com. Replacement parts are available for purchase at ninjaaccessories.com. For more information

on what are classiﬁed as wearable and non-wearable parts, visit ninjakitchen.com/warranty. This warranty gives you speciﬁc legal rights, and you may also have other rights that vary

from state to state. Some states do not permit the exclusion or limitation of incidental or consequential

damages, so the above may not apply to you.

25ninjakitchen.com24

Page 15

SharkNinja Operating LLC US: Needham, MA 02494 1-877-646-5288 ninjakitchen.com

Illustrations may dier from actual product. We are constantly striving to improve our products, therefore the speciﬁcations contained herein are subject to change withoutnotice.

AUTO-IQ, NINJA , and THERMAL FL AVOR EXTRACTION are registered trademarks of SharkNinja Operating LLC.

NINJA HOT & COLD B REWED SYSTEM and N INJA S MART SCOOP are trademarks of SharkNinja Operating LLC.

SharkNinja U.S. Patent information, visit sharkninja.com/uspatents.

@ninjakitchen