Ninja Master Prep QB1000UK Owner's Manual

Page 1
®
Master Prep® Professional
QB1000UK Series
OWNER’S GUIDE
Page 2
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING YOUR NINJA® MASTER PREP® PROFESSIONAL.
IMPORTANT:
This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children shall not use or play with this appliance. Close supervision is necessary to keep appliance and cord out of reach of children during use.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:
1 To protect against electric shock, DO NOT
immerse cord, plug or any part of the main unit in water or any other liquids.
2 DO NOT let cord hang over edge of table or
counter, or touch hot surfaces.
3 DO NOT allow children to operate the appliance or
use as a toy. Close supervision is necessary when any appliance is used near children.
4 DO NOT use with damaged cord or plug. 5 DO NOT USE if the appliance is not working, has
been dropped, dropped into water, damaged or left outdoors.
6 NO SERVICEABLE PARTS. Incorrect re-
assembly or repair can cause a risk of electrical shock or injury to persons when the appliance is used. Contact Customer Service.
7 Unplug appliance from outlet when not in use and
before cleaning.
Turn the appliance off and remove the power cord
8
from the electrical outlet when not in use, before assembling or disassembling parts, accessing parts that move while in use and before cleaning. To unplug, grasp the plug and pull from the electrical outlet. Never pull from the power cord.
9 DO NOT place on or near a hot gas or electric
burner.
10 DO NOT operate the appliance for more than 15
seconds.
11 DO NOT operate the appliance empty. 12 Extreme caution must be used when moving an
appliance containing hot food, water or other liquids.
13 Use this appliance on a stable work surface away
from water.
14 DO NOT remove the motor head before the
chopping blades have stopped turning.
15 CAUTION! Chopping blades are sharp, handle
with care. When handling the chopping blades, always hold by the plastic shaft.
16 DO NOT attempt to sharpen blades. 17 DO NOT expose the pitchers or bowl to extreme
temperature changes.
18 DO NOT use the pitchers or bowl if they are
cracked or chipped.
19 DO NOT use the appliance if chopping blades are
bent or damaged.
20 Avoid contact with moving parts at all times.
Keep hands, hair, clothing as well as spatulas and other utensils away from pitcher or chopping bowl during operation to prevent risk of personal injury and /or damage to the appliance.
CAUTION: DO NOT PROCESS HOT FOODS
21
OR HOT LIQUIDS.
before processing.
22 Immediately release the On/Off pulse button on
the motor head in the event that the appliance malfunctions during use.
Allow hot ingredients to cool
23 To reduce the risk of injury, NEVER operate the
appliance without the splash guard in place; DO NOT try to defeat the interlock mechanism; make sure that the cutting blades are properly assembled before operating the appliance.
24 DO NOT use outdoors. 25 DO NOT use appliance for other than intended
use.
26 If the appliance overheats, a thermal switch will
become activated and shut off the motor. To reset, unplug the appliance and let it cool down for approximately 10 minutes before using again.
27 The use of accessory attachments, including
canning jars not recommended by EURO-PRO Operating LLC may cause fire, electrical shock or risk of personal injury.
NOTE: This unit has a short power supply cord to reduce the risk resulting from becoming entangled in or tripping over a long cord. An extension cord may be used if you are careful in its use.
1 If using an extension cord, the electrical rating
of the extension cord should be rated at least 15 amperes. Extension cords rated for less amperage may overheat.
2 An extension cord must be arranged so that it will
not drape over the countertop or tabletop where it can be pulled on by children or tripped over accidentally.
SAVE THESE
INSTRUCTIONS
1 2
Freep hone 0 800 8 62 04 53
Page 3
This appliance complies with the WEEE-Directive 2012/19/EU on the disposal of electrical and electronic equipment (WEEE ).
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material sources. To return your used device, please use the return and collection systems or contact the retailer where this product was purchased. They can take this product for environmental safe recycling.
This appliance complies with the European directives for electromagnetic compatibility (EMC) 2004/108/EC and its revisions, as well as Low Voltage Directive (LVD) 2006/95/EC and its revisions.
Guarantee: This product is unconditionally guaranteed for one year against all defects of workmanship and materials. This guarantee does not affect your statutory rights. If this product proves unsatisfactory please contact our customer service department on freephone 0800 862 0453 or by e-mail ukser vice@euro-pro.com.
Thank you for purchasing the Ninja® Master Prep® Professional.
Contents
Getting Started ................................................................................................................. 5
Using the Master Prep® Professional Pitcher ....................................................................... 7
Using the Master Prep® Professional Bowl .......................................................................... 9
Cleaning and Maintenance .............................................................................................. 11
Troubleshooting Guide .....................................................................................................11
THIS MANUAL COVERS MODEL:
QB1000UKBK 30 QB1000UKCR 30 QB1000UKRD 30
TECHNICAL SPECIFICATIONS
Voltage: 220-240V~, 50/60Hz. Power: 500 Watts Pitcher Capacity: 1.25 L
1.5 L Bowl Capacity: 500 ml
Euro-Pro, Ninja, and Ninja Master Prep are trademarks of Euro-Pro Operating LLC.
3 4
Freep hone 0 800 8 62 04 53
Page 4
Getting Started
Getting Started
a
The Ninja® Master Prep® Professional is an indispensable kitchen tool that is perfect for blending, chopping, mixing or pureeing
b
when preparing your favorite recipes. For best results, be sure to carefully read all the instructions contained in the manual before using this appliance.
c
d
k
e
h
l
m
f
i
n
j
g
j
g g
o
a On/Off Pulse Button
b Power Head
c Pouring Spout
d Pitcher Splash Guard
®
e Ninja
6-Blade
f Master Prep
®
Professional 1.5 L Pitcher
with Non-Slip Base
g Spindle Pin
®
h Ninja
4-Blade
i Master Prep® Professional 1.25 L Pitcher
with Non-Slip Base
j Pitcher Storage Lid
k Bowl Splash Guard
l Upper Blade
m Lower Blade
n Master Prep
®
Professional Bowl with
Non-Slip Base
o Bowl Storage Lid
500 Watt Power Head
NEVER allow the power head to become wet when plugged into an electrical outlet.
WARNING: The power head should never be immersed in water or any other liquid.
CAUTION: Make sure that the power head is unplugged from the electrical outlet and that the blades have stopped
turning before attaching or removing any accessory.
CAUTION: Blades are sharp! Use extreme caution when handling the blades. Always hold them by the
shaft. Do not attempt to sharpen blades.
IMPORTANT: Never run the appliance empty.
p Power Cord (not shown)
5 6
Freep hone 0 800 8 62 04 53
Page 5
Using the Master Prep® Professional Pitcher
Shaft
Fig. 1
CAUTION: Blades are sharp! Use extreme caution when
handling the blades. Always hold them by the shaft.
IMPORTAN T: Never run the appliance empty.
1 Place the Master Prep
®
Professional Pitcher on a clean, dry,
level surface.
2 Holding the blade by the shaft, place it onto the spindle pin
inside the Master Prep
• Use the Ninja
• Use the Ninja
®
Professional Pitcher.
®
6-Blade in the 1.5 LPitcher. (Fig. 1)
®
4-Blade in the 1.25 L Pitcher. (Fig. 2)
IM PO RTANT: Place blade inside the container carefully as
blades are sharp.
Fig. 3
Shaft
Fig. 2
WARNING: DO NOT try to place the blade onto the power
head and then into the Master Prep® Professional Pitcher.
3 Add the ingredients to be processed into the Master Prep
Professional pitcher.
IM PO RTANT: Never add ingredients into the Master Prep®
Professional pitcher before placing the blades in first.
4 Place the pitcher splash guard onto the top of the Master
®
Prep
Professional pitcher. (Fig. 3)
Fig. 4 Fig. 5
5 Place the power head on top of the pitcher splash guard
making sure that it is securely in place. (Fig. 4) DO NOT attempt to operate the appliance without the safety splash guard in place.
6 To start the applian ce, plug the power cord into the
electrical outlet, securely hold power head while operating and press on the on/off pulse button located on the top of
®
the power head. (Fig. 5)
7 Hold the Master Prep
®
Professional pitcher firmly while depressing the on/off pulse button to ensure the unit stays in place.
NOTE: DO NOT operate the appliance continuously for
more than 15 seconds at a time.
8 To stop the appliance, remove your fingers from the on/off
9 In order to obtain a better quality of chopping, operate the
appliance by using the “pulse” method.
10 Make sure that the blades have stopped completely before
removing the power head.
11 If the ingredients stick to the side of the Master Prep
®
Professional pitcher, stop the appliance, remove the power head and the splash guard. Use a spatula to dislodge the pieces and then replace the splash guard and the power head. Continue processing.
12 Depending on the consistency of the contents, use the
pouring spout to empty liquid contents.
13 For thicker consistencies, first remove splash guard and
blade (by its shaft), then empty contents of the Master
®
Prep
Professional Pitcher.
pulse button.
7 8
Freep hone 0 800 8 62 04 53
Page 6
Using the Master Prep® Professional Bowl
Shaft
Fig. 8 Fig. 9 Fig. 10
Fig. 6 Fig. 7
CAUTION: Blades are sharp! Use extreme caution when
handling the blades. Always hold them by the shaft.
IM PO RTANT: Never run the appliance empty.
1 Place the Master Prep
®
Professional bowl on a clean, dry,
level surface.
2 Holding the lower blade by the shaft, place it over the
spindle pin inside the Master Prep
®
Professional bowl.
(Fig. 6)
3 Carefully insert the upper blade over the lower blade
rotating it until it locks onto the lower blade. (Fig. 7)
IM PO RTANT: Always assemble the blades inside the
container.
WARNING: DO NOT try to place the blades onto the power
head and then into the Master Prep® Professional bowl.
4 Place the food that you want to process into the Master
®
Prep
Professional bowl.
IM PO RTANT: Never add ingredients into the Master Prep®
Professional bowl before placing the blade assembly in first.
NOTE: DO NOT add more than 450 ml dry or 230 ml liquid
ingredients as this will strain the motor and may cause overflow.
5 Place the splash guard on the bowl. (Fig. 8)
6 Place the power head on top of the splash guard making
sure that it is securely in place. (Fig. 9) DO NOT attempt to operate the appliance without the safety splash guard in place.
7 To start the appliance, plug the power cord into the
electrical outlet, securely hold power head while operating and press on the on/off pulse button located on the top of the power head. (Fig. 10)
8 Hold the Master Prep
®
Professional bowl firmly while depressing the on/off pulse button to ensure the unit stays in place.
NOTE: DO NOT operate the appliance continuously for
more than 15 seconds at a time. Be careful not to over process. For coarsely chopped foods, use repeated short pulsing action until the desired consistency is reached.
9 To stop the appliance, remove your fingers from the on/off
pulse button.
10 In order to obtain a better quality of chopping, operate the
appliance by using the “pulse” method.
11 Make sure that the blades have stopped completely before
removing the power head.
12 If the ingredients stick to the side of the Master Prep
®
Professional bowl, stop the appliance, remove the power head and the splash guard. Use a spatula to dislodge the pieces and then replace the splash guard and the power head. Continue processing.
13 Remove the blade assembly by its shaf t before you empty
the contents of the Master Prep
HINTS & TIPS FOR USING YOUR NINJA® MASTER
®
PROFESSIONAL
PREP
®
Professional bowl.
• The chopping blades can be used for chopping meat, fish, vegetables, cheese etc.
• For mincing, chopping and pureeing, increase the length of pulses.
• For coarse chopping, use short, quick pulses and monitor food texture.
• Pre-cut larger pieces to make them fit into the Master
®
Prep
Professional. When chopping hard foods (e.g. meat,
cheese) cut into 1-inch cubes.
9 10
Freep hone 0 800 8 62 04 53
Page 7
Cleaning and Maintenance
CAUTION: Make sure that the power head is unplugged from power source before inserting or removing any attachment and
before cleaning.
DO NOT immerse the power head into water or any other liquid. Clean with a damp sponge or cloth and wipe dry.
The Master Prep
®
Professional pitcher, Master Prep® Professional bowl, storage lids, Master Prep® Professional splash guards and chopping blades are all dishwasher safe. It is recommended to place the storage lids and the chopping blades on the top rack. Use extreme caution when handling the chopping blades as they are very sharp.
Clean the Ninja
®
Master Prep® Professional and all parts before first use and immediately after each use.
Troubleshooting Guide
PROBLEMS POSSIBLE REASONS & SOLUTIONS
Check that the bottom of motor head is clean and there is no food blocking connection when placing on containers.
There is too much food in the container.
Motor Doesn’t Start or Blades Don’t Rotate.
The unit has overheated. Unplug and wait approximately 10 minutes before using again.
Make sure the splash guard is securely on container.
Make sure the power head is securely placed on splash guard.
Check that the plug is securely inserted into the electrical outlet.
Check fuse or breaker. Replace fuse/reset breaker.
Notes
Food is Unevenly Chopped.
enough. Try cutting the food into smaller pieces of even size and processing smaller amounts per batch.
Either you are chopping too much food at one time, or the pieces are not small
Food is Chopped Too Fine or is Too Watery.
Food Collects On Splash Guard/Safety Cover or On the Sides of the Master Prep® Professional Pitcher or Master
®
Professional Bowl.
Prep
You Cannot Achieve Snow From Solid Ice.
The food has been over processed. Use brief pulses or process for shorter time. Let blades stop completely between pulses.
You may be processing too much food. Turn the machine off. When the blades stop rotating, remove the power head and the splash guard. Remove some of the food being processed.
Do not use ice that has been sitting out or has started to melt. Be sure to use short pulses in the beginning to break up large pieces.
To purchase replacement parts, please visit our website: www.ninjakitchen.eu
or contact customer service:
11 12
Freep hone 0 800 8 62 04 53
0800 862 0453
Page 8
Notes Notes
13 14
Freep hone 0 800 8 62 04 53
Page 9
Euro-Pro Europe Limited 15 Mariner Court Calder Park Wakefield WF4 3FL
Freephone 0800 862 0453
www.ninjakitchen.eu
Copyright © 2014 Euro-Pro Operating LLC
Euro-Pro, Master Prep and Ninja are trademarks of Euro-Pro Operating LLC.
Technical Details Model number: QB1000UK Series 30 Input: 500 Watts
Printed in China
Illustrations may differ from actual product.
QB1000UKseries_30_IB_ENG_150611_2
Loading...