BL470UK
OWNER’S GUIDE
9 00 WA TT S
START
STOP
PULSE
www.ninjakitchen.eu
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL APPLIANCES,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING
YOUR NUTRI NINJA® PRO BLENDER.
IMPORTANT:
This appliance is not intended for use by
persons with reduced physical, sensory or
mental capabilities, or lack of experience
and knowledge, unless they have been
given supervision or instruction concerning
use of the appliance by a person
responsible for their safety.
Children shall not use or play with this
appliance. Close supervision is necessary
to keep appliance and cord out of reach of
children during use.
WARNING:
Extension cords are not recommended for
use with this product.
CAUTION:
ln order to avoid a hazard due to
inadvertent resetting of the thermal
cut-out, this appliance must not be
supplied through an external switching
device, such as a timer, or connected to a
circuit that is regularly switched on and off
by the utility.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR INJURY:
1. CAUTION: The blades are not affixed to
the unit. They are removable and extremely
sharp. When handling the blade assembly,
do not hold the blades but rather always
hold the base of the blade assembly.
Blades are sharp. Handle carefully!
2. CAUTION: DO NOT BLEND HOT FOODS OR
HOT LIQUIDS. Allow hot ingredients to cool
before processing.
3. CAUTION: DO NOT process dry
ingredients without adding liquid to the
cup. This product is not intended for dry
blending.
4. To protect against electrical shock, do not
submerge the appliance or allow the power cord
to come into contact with water or any other
liquid.
5. DO NOT allow young children to operate the
appliance or use as a toy. Close supervision
is necessary when any appliance is used
nearchildren.
6. Never leave an appliance unattended when in
use.
7. Turn the appliance off and remove the power
cord from the electrical outlet when not in use,
before assembling or disassembling parts,
accessing parts that move while in use and
before cleaning. To unplug, grasp the plug and
pull from the electrical outlet. Never pull from the
power cord.
8. DO NOT abuse the power cord. Never carry
the appliance by the power cord or yank it to
disconnect from electrical outlet; instead, grasp
the plug and pull to disconnect.
9. DO NOT use with damaged cord or plug.
10. DO NOT USE if the appliance is not working, has
been dropped, dropped into water, damaged or
left outdoors.
11. NO SERVICEABLE PARTS. Incorrect re-
assembly or repair can cause a risk of electrical
shock or injury to persons when the appliance is
used. Contact Customer Service.
12. If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a
hazard.
13. DO NOT let the power cord hang over the edge
of table or counter or touch hot surfaces such as
the stove.
14. Always use the appliance on a dry, level surface.
15. Keep hands, hair, clothing, as well as utensils
out of container while processing or blending
to reduce the risk of severe injury to persons or
damage to the appliance. A scraper may be used
but only when the appliance is not running.
16. Avoid contact with moving parts.
17. DO NOT attempt to sharpen blades.
18. DO NOT use the appliance if blade assembly is
bent or damaged.
19. To reduce the risk of injury, never attempt to
place the Nutri Ninja
motor base without first assembling the blade
assembly to the Nutri Ninja
20. DO NOT operate this appliance on or near any
hot surfaces (such as gas or electric burner or in
a heated oven).
21. The use of attachments or accessories
including canning jars, not recommended by the
manufacturer may result in fire, electric shock or
personal injury.
®
blade assembly onto the
®
Cup.
22. DO NOT remove any container from the motor
base while the appliance is in operation. Always
unplug the unit when not in use.
23. To reduce the risk of injury, NEVER operate the
appliance without the blade assembly in place;
DO NOT try to defeat the interlock mechanism;
make sure that the attachment is properly
installed before operating the appliance.
24. DO NOT expose containers to extreme
temperature changes.
25. DO NOT overfill. Do not exceed “MAX” fill line.
26. DO NOT operate the appliance empty.
27. If the appliance overheats, a thermal switch will
become activated and shut off the motor. To
reset, unplug the appliance and let it cool down
for approximately 30 minutes before using again.
28. To reduce the risk of burns, always allow the
appliance to cool before taking off parts and
before cleaning.
29. Max ON time is 1 minute under 900W load. If
the appliance overheats, a thermal switch will
become activated and shut off the motor. To
reset, unplug the appliance and let it cool down
for approximately 30 minutes before using again.
30. THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use this
appliance for anything other than its intended
use. Do not use outdoors.
31. Appliance accessories are not intended to
be used in the microwave as it may result in
damage to the accessories.
SAVE THESE
INSTRUCTIONS
1 2
www.ninjakitchen.eu080 0 862 0 453
Contents
This applaince complies with the WEEE-Directive 2012/19/EU on the disposal of electrical and electronic equipment
(WEEE).
This marking indicates that this product should not be disposed with other household wastes throughout the
EU. To prevent possible harm to the environment or human health fom uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material sources. To return your used device, please use the
return and collection systems or contact the retailer where this product was purchased. They can take this
product for environmental safe recycling.
This appliance complies with the European directives for electromagnetic compatibility (EMC) 2004/108/EC and its
revisions, as well as Low Voltage Directive (LVD) 2006/95/EC and its revisions.
Guarantee: This product is unconditionally guaranteed for one year against all defects of workmanship and materials.
This guarantee does not affect your statutory rights. If this product proves unsatisfactory please contact our customer
service department on freephone 0800 862 0453 or by e-mail ukservice@euro-pro.com.
Thank you for
purchasing the
Nutri Ninja® Pro.
Getting to Know Your Nutri Ninja® Pro ..................................................................................5
Before First Use ................................................................................................................7
Assembly and Use of the Nutri Ninja® Pro ...........................................................................8
Suggested Uses .................................................................................................................9
Care & Maintenance ........................................................................................................10
Troubleshooting Guide ......................................................................................................10
THIS BOOK COVERS MODEL NUMBERS:
BL470UK 30
TECHNICAL SPECIFICATIONS
Voltage: 220-240V~, 50/60Hz
Power: 900 Watts
Cup Capacity:
500 ml
650 ml
3 4
www.ninjakitchen.eu080 0 862 0 453
STOP
PULSE
STOP
PULSE
PULSE
90 0 W AT T S
STOP
START
PULSE
90 0 W AT T S
STOP
START
PULSE
90 0 W AT T S
STOP
START
PULSE
START
PULSE
STOP
9 00 WATTS
Getting To Know Your Nutri Ninja® Pro
a b
d
c
e
9 00 WATTS
START
PULSE
STOP
90 0 W AT T S
START
PULSE
STOP
FEATURES:
• Nutrient & Vitamin Extraction
• 900 Watt Motor
• User Interface:
START | STOP
Press once to start continuous running, press again to stop
PULSE
Runs only while pressed down. Short presses make short pulses.
• Personalized, healthy drinks and juices
®
lids for drinks on the go
®
Cups, BPA free
a Pro Extractor Blades
b Sip & Seal® Lids (x2)
• Sip & Seal
™
c Small 500 ml Nutri Ninja® Cup
d Regular 650 ml Nutri Ninja® Cup
• Nutri Ninja
• Cord storage
e Motor Base
5 6
www.ninjakitchen.eu080 0 862 0 453
Before First Use
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
WARNING: Never leave the appliance
unattended while in use.
CAUTION: Blades are sharp! Use extreme
caution when handling the blade assembly.
Always hold them by the base of the blade
assembly.
CAUTION: DO NOT BLEND HOT FOODS OR HOT
LIQUIDS.
CAUTION: Never at tempt to remove the cup
while the appliance is still running.
IMPORTANT: Attachments are
interchangeable.
IMPORTANT: Never run the appliance empty.
Assembly and Use of the Nutri Ninja® Pro
ASSEMBLY USE REMOVAL
Fig. 1 Fig. 2
900 WAT T S
START
PULSE
STOP
900 WAT T S
START
PULSE
STOP
Fig. 3 Fig. 4 Fig. 5
900 WAT T S
START
PULSE
STOP
900 WAT T S
START
PULSE
STOP
CAUTION: Handle the blade assembly with care
when washing as the blades are very sharp.
1 Remove all packaging material and labels from the
appliance.
2 Wash the lids, cups and blade assembly in warm, soapy
water with a sof t cloth.
3 Rinse and dry thoroughly.
4 Cups, lids and blade assembly are all dishwasher safe.
It is recommended that the lids and attachments be
placed on the top rack. Ensure that the blade assembly is
removed from the cups before placing in the dishwasher.
5 Wipe the motor base clean with a damp cloth.
CAUTION: DO NOT BLEND HOT FOODS OR HOT
LIQUIDS IN ANY NUTRI NINJA
®
CUP.
IMPORTANT: Place the motor base on a clean,
dry, level surface such as a counter or table top.
1 Make sure that the motor base is plugged in for use. No
lights will turn on.
2 Add ingredients to the cup.
NOTE: Do not overfill! to avoid spilling, do not add
ingredients past the “MAX” fill line.
3 Place the blade assembly onto the cup and twist it on
tightly until you have a good seal. ( Fig. 1)
4 Turn the cup upside down and place it onto the motor
base, aligning the tabs on the cup with the motor base.
Turn it clockwise, until you feel it click into place. The
lights will illuminate. (Fig. 2)
6 To remove the cup, ensure that the motor has stopped
running. Then turn the cup anticlockwise (Fig. 4) and
pull straight up to remove. (Fig. 5)
7 Turn the cup upright and remove the blade assembly
by twisting the blade assembly anticlockwise. Be sure
to store the blade assembly attached to an empty cup
when not in use.
8 Twist the Sip & Seal
®
lid onto the cup to enjoy your
drink on the go. Press flip top cap firmly into the
opening to get the best seal. The flip top cap locks open
when pressed backward.
9 Make sure that the motor base is unplugged when not
in use.
10 To remove the motor base unit, tip the unit forward
from the rear to easily disengage the suction cups.
5 Press one of the buttons to activate. (Fig. 3)
7 8
www.ninjakitchen.eu080 0 862 0 453
Suggested Uses
Care & Maintenance
PURPOSE /
FUNCTION
Chopping / Pulsing
Mixing 650 ml
Sauces 650 ml
Frozen Blending
Nutrient Juices/Smoothies
CAUTION: DO NOT process dry ingredients in the Nutri Ninja® cups. Always add liquid to blend in the plastic
Nutri Ninja® cups. We do not recommend grinding in any of our Nutri Ninja® Cups
FILLING YOUR NUTRI NINJA
Start with your Fresh Fruit or Veggies. Then add any
Nuts, Seeds or Powder followed by any liquids like Juice
or Milk. More liquid can help to integrate powder. Then
add your Frozen Fruit and Ice. Remember to securely
tighten the blade and don’t overfill the cups. (Fig. 6)
®
SUGGESTED CUP TYPE OF FOOD
500 ml
650 ml
500 ml
650 ml
500 ml
650 ml
frozen fruit
juices, liquids
nuts, seeds,
powders
fresh fruits/
veggies
Salsa
Leafy Herbs
Batters
Dips
Vinaigrettes
Salad Dressings
Simple Sauces
Ice
Frozen Fruit
Ice Cream
Fruits
Vegetables
Leafy Greens
ice
Fig. 6
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any attachment and before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
CAUTION: Handle the blade assembly with care
when washing as the blades are very sharp.
1 Separate/remove all parts from each other.
2 Clean the motor base with a damp cloth and wipe dry.
3 Place cups in the dishwasher. Place the lids and the
blade assembly the top rack.
OR
4 Carefully hand wash the lids, Nutri Ninja
blade assembly in warm, soapy water with a soft cloth.
If the appliance needs servicing, please call customer
care at 0800 862 0453.
®
cups and
Troubleshooting Guide
PROBLEMS POSSIBLE REASONS & SOLUTIONS
Unit doesn't turn on
Unit doesn't turn off
Lid/blade assembly hard to
assemble
Food is not evenly chopped
Doesn't mix well, food gets
stuck.
Unit moves on counter while
blending
Unit is difficult to remove
from counter for storage
• Make sure the unit is plugged in
• Insert and rotate cup clockwise in the base until it "clicks".
• Remove cup from base by rotating cup anticlockwise and lifting out.
Unplug the power cord from the outlet.
• Set the cup on a level sur face. Place the lid or blade assembly on the top
of the cup and align the threads so that the lid/blades sit flat on the cup.
Twist clockwise so that the lid/blades evenly align to the cup until you
have a tight seal.
• For best results when chopping, make sure all ingredients are as dry as
possible. Cut pieces down to even sizes, and reduce the amount of food in
the cup. Use very short pulses by quickly pressing the "PULSE" button.
• The pulses and pauses allow the food to settle towards the blade. If food is
routinely getting stuck adding some liquid will usually help.
• When packing the cups, start with fresh items, then powders/nuts. Add
liquids, and finally frozen items or ice.
• Make sure the surface as well as the feet of the unit are clean and dry.
• Tip unit forward from the back to easily disengage the suction feet.
HOW TO STORE
1 Store the Nutri Ninja® Pro upright. Secure the power cord
underneath the base by wrapping the cord around the cord
wrap. Do not place anything on top. Store the cups and
the rest of the at tachments along side the appliance where
they will not be damaged and won’t cause a hazard.
RESETTING THE MOTOR THERMOSTAT
The Nutri Ninja® Pro features a safety system which
prevents damage to the unit’s motor and drive system
should you inadvertently overload your appliance. If the
appliance is being overloaded, the motor will stop. To reset
the appliance, follow the resetting procedure below:
1 Unplug the appliance from the electrical outlet.
2 Remove and empty the cup and ensure that no food is
jamming the cutting blades.
3 Allow the appliance to cool for approximately 30 minutes.
4 Re-install the cup onto the base and re-plug the
appliance into the electrical outlet.
5 Proceed to use the appliance as before while making sure
not to exceed the recommended maximum capacities.
9 10
www.ninjakitchen.eu080 0 862 0 453
Euro-Pro Europe Limited
15 Mariner Court
Calder Park
Wakefield
WF4 3FL
Freephone 0800 862 0453
www.ninjakitchen.eu
Copyright © 2015 Euro-Pro Operating LLC
Euro-Pro, Sip & Seal, Nutri-Ninja and Ninja are
registered trademarks of Euro-Pro Operating LLC.
Pro Extractor Blades is a trademark of Euro-Pro
Operating LLC.
Printed in China
Illustrations may differ from actual product. We are
constantly striving to improve our products, therefore
the specifications contained herein are subject to
change without notice.
BL470UK_30_IB_E_150609_1
Loading...