Ninja BL45X, BL450 Owner's Manual

Download

Page 1

Pro Blender

BL45X series

OWNER’S GUIDE

1 877 646-5288

Page 2

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS BEFORE USING YOUR NUTRI NINJA® PRO BLENDER.

WARNING: Extension cords are not

recommended for use with this product.

WARNING: The blades are not

afﬁxed to the unit. They are removable and very sharp. Handle with care!

CAUTION: ln order to avoid a

hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

IMPORTANT: This appliance is not

intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children shall not use or play with this appliance. Close supervision is necessary to keep appliance and cord out of reach of children during use.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

1. CAUTION: The blades are not afﬁxed to

the unit. They are removable and extremely sharp. When handling the blade assemblies, do not hold the blades but rather always hold by the base of the blade assembly. Blades are sharp. Handle carefully!

CAUTION: DO NOT BLEND HOT LIQUIDS.

Allow the liquids and foods to cool to room temperature before blending.

CAUTION: Do not blend dry ingredients unless pulsing for short intervals per the instructions. Continuous blending dry ingredients will overheat the blender.

4. To protect against electrical shock, do not submerge the appliance or allow the power cord to come into contact with water or any other liquid.

5. DO NOT allow children to operate the appliance or use as a toy. Close supervision is necessary when any appliance is used nearchildren.

6. Never leave an appliance unattended when in use.

7. Turn the appliance off and remove the power cord from the electrical outlet when not in use, before assembling or disassembling parts, accessing parts that move while in use and before cleaning. To unplug, grasp the plug and pull from the electrical outlet. Never pull from the power cord.

8. DO NOT abuse the power cord. Never carry the appliance by the power cord or yank it to disconnect from electrical outlet; instead, grasp the plug and pull to disconnect.

9. DO NOT use with damaged cord or plug.

10. DO NOT USE if the appliance is not working, has been dropped, dropped into water, damaged or left outdoors.

11. NO SERVICEABLE PARTS. Incorrect reassembly or repair can cause a risk of electrical shock or injury to persons when the appliance is used. Contact Customer Service.

12. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualiﬁed persons in order to avoid a hazard.

13. DO NOT let the power cord hang over the edge of table or counter or touch hot surfaces such as the stove.

14. Always use the appliance on a dry, level surface.

15. Keep hands, hair, clothing, as well as utensils out of container while processing or blending to reduce the risk of severe injury to persons or damage to the appliance. A scraper may be used but only when the appliance is not running.

16. Avoid contact with moving parts.

17. DO NOT attempt to sharpen blades.

18. DO NOT use the appliance if blade assembly is bent or damaged.

19. To reduce the risk of injury, never attempt to place the Pro Extractor Blades without ﬁrst assembling the Pro Extractor Blades to the Nutri Ninja Cup.

20. DO NOT operate this appliance on or near any hot surfaces (such as gas or electric burner or in a heated oven).

21. The use of attachments or accessories including canning jars, not recommended by the manufacturer may result in ﬁre, electric shock or personal injury.

22. DO NOT remove any container from the motor base while the appliance is in operation. Always unplug the unit when not in use.

23. To reduce the risk of injury, NEVER operate the appliance without the blade assembly in place; DO NOT try to defeat the interlock mechanism; make sure that the attachment is properly installed before operating the appliance.

™

onto the motor base

24. DO NOT expose containers to extreme temperature changes.

25. DO NOT overﬁll. Do not exceed “MAX” ﬁll line.

26. DO NOT operate the appliance empty.

27. If the appliance overheats, a thermal switch will become activated and shut off the motor. To reset, unplug the appliance and let it cool down for approximately 30 minutes before using again.

28. To reduce the risk of burns, always allow the appliance to cool before taking off parts and before cleaning.

29. Max ON time is 1 minute under 900W load. If the appliance overheats, a thermal switch will become activated and shut off the motor. To reset, unplug the appliance and let it cool down for approximately 30 minutes before using again.

30. THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY. Do not use this appliance for anything other than its intended use. Do not use outdoors.

31. Appliance accessories are not intended to be used in the microwave as it may result in damage to the accessories.

32. DO NOT remove lid until blade has COMPLETELY STOPPED.

33. DO NOT attempt operation without the cover being in place.

34. DO NOT process liquid ingredients in the coffee grinder. Accessory is not intended for liquid processing.

35. DO NOT attempt to chop ice in the coffee grinder.

36. Check stainless steel cup and coffee grinder for presence of foreign objects before using.

SAVE THESE

INSTRUCTIONS

2 3

Page 3

Contents

This appliance complies with the WEEE-Directive 2012/19/EU on the disposal of electrical and electronic equipment (WEEE).

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material sources. To return your used device, please use the return and collection systems or contact the retailer where this product was purchased. They can take this product for environmental safe recycling.

This appliance complies with the European directives for electromagnetic compatibility (EMC) 2004/108/EC and its revisions, as well as Low Voltage Directive (LVD) 2006/95/EC and its revisions.

Thank you for purchasing the Nutri Ninja® Pro Blender

Getting to Know Your Nutri Ninja Pro Blender .......................................................................6

Before First Use ................................................................................................................8

Use of the Nutri Ninja Cups .................................................................................................9

Use of the Coffee and Spice Grinder ..................................................................................10

Suggested Uses ...............................................................................................................11

Care & Maintenance ........................................................................................................12

Troubleshooting Guide ......................................................................................................13

Replacement Parts ...........................................................................................................13

Warranty & Registration ....................................................................................................14

THIS BOOK COVERS MODEL NUMBERS:

BL45X***** 30

TECHNICAL SPECIFICATIONS

Voltage: 220-240V~, 50/60Hz Power: 900 Watts

Nutri Ninja

Cup Capacity: 300ml 500ml 650ml 900ml

Stainless Steel

Ninja

Cup Capacity: 650ml

Coffee and Spice

Ninja Grinder: 10 tbsp

4 5

Page 4

Getting To Know Your Nutri Ninja® Pro Blender

The Nutri Ninja® Pro Blender is a high powered innovative tool with a compact design and outstanding performance. It is perfect for ice crushing, chopping, blending, and nutrient and vitamin extraction. Blend and go with the convenient Sip & Seal® lids, create delicious drinks to get you out the door quickly! Best results are achieved when you Pulse.

a 900 ml Nutri Ninja Cup b 650 ml Nutri Ninja Cup c 500 ml Nutri Ninja Cup d 300 ml Nutri Ninja Cup e 650 ml Stainless Steel Ninja f Pro Extractor Blades

™

g h i j

g Sip & Seal

Lid

h Spout Lid i Shaker Lid j Silicone Grip Sleeve

Cup

k Coffee and Spice Ninja Grinder l Motor Base

FEATURES:

• Nutrient&VitaminExtraction

• 900WattMotor

• Personalised,healthydrinksandjuicesonthego

• Sip&Seallidsfordrinksonthego

• Shake,Vent&StoreLidforgratedcheesesorspices

• NutriNinjaCups,BPAfree

• Cordstorage

• StainlessSteel650mlNinjaCup,BPAfree

• CoffeeandSpiceNinjaGrinder,BPAfreelid

6 7

Page 5

Before First Use

PLEASE KEEP THESE IMPORTANT SAFEGUARDS IN MIND WHEN USING THE APPLIANCE:

WARNING: Never leave the appliance

unattended while in use.

CAUTION: Do not blend hot liquids.

Allow liquids and foods to cool to room temperature before blending.

CAUTION: Blades are sharp! Use extreme

caution when handling the blade assemblies. Always hold them by the base of the blade assembly.

CAUTION: Never remove the container while

the appliance is still running.

CAUTION: We do not recommend grinding in

any of our Nutri Ninja® Cups.

IMPORTANT: Never run the appliance empty.

IMPORTANT: Appliance accessories are not

intended to be used in the microwave as it may result in damage to the accessories.

Use of the Nutri Ninja® Cups

WARNING: Never leave the appliance unat tended while in use.

CAUTION: Pro Extractor Blades

Extractor Blades, do not hold the blades, always hold by the base of the blade assembly.

CAUTION: CAUTION: DO NOT BLEND HOT LIQUIDS. Allow the liquids and foods to cool to room temperature

before blending.

IMPORTANT: Make sure that the motor base is plugged in for use.

IMPORTANT: When processing soft dry ingredients such as day-old bread or cheese use quick, short 1 second

pulses. Do not overﬁll to avoid overheating the appliance. Allow the appliance to cool after each use.

™

are sharp and removable, handle with care. When handling the Pro

ASSEMBLY USE REMOVAL

CAUTION: Blade assemblies are sharp and

removable, handle with care. When handling the blade assemblies, do not hold the blades, always hold by the base of the blade assembly.

1 Remove all packaging material and labels from

theappliance.

2 Wash the lids, cups, and attachments in warm, soapy

water with a soft cloth.

CAUTION: Handle the blade assemblies with care

when washing as the blades are very sharp.

3 Rinse and dry thoroughly.

NOTE: The Stainless Steel Ninja Cup is NOT

dishwasher safe.

4 Cups, lids, and attachments are all dishwasher safe.

Fig. 2Fig. 1

Fig. 3

1 Place the motor base on a clean, dry, level surface such

as a counter or table top.

2 Make sure that the motor base is plugged in for use.

3 Add ingredients to the cup.

NOTE: Do not overﬁll! to avoid spilling, do not add

ingredients past the “MA X” ﬁll line.

4 Place the Pro Extractor Blades onto the cup and twist it

on tightly until you have a good seal. ( Fig. 1)

5 Turn the cup upside down and place it onto the motor

base, aligning the tabs on the cup with the motor base. Turn it clockwise, the unit is ready for use. (Fig. 2)

6 Press down on the top of the cup in short intervals to

activate. (Fig. 3)

7 When you have reached your desired consistency, stop

the appliance by removing your hand from the cup.

8 To remove the cup, ensure that the motor has stopped

running. Then turn the cup anticlockwise (Fig. 4) and pull straight up to remove. (Fig. 5)

9 Turn the cup upright and remove the Pro Extractor

Blades by twisting the Pro Extractor Blades anticlockwise. Be sure to store the Pro Extractor Blades attached to an empty cup when not in use.

10 Twist the Sip & Seal

drink on the go. Press ﬂip top cap ﬁrmly into the opening to get the best seal. The ﬂip top cap locks open when pressed backward.

11 Make sure that the motor base is unplugged when not

in use.

Fig. 4 Fig. 5

lid onto the cup to enjoy your

It is recommended that the lids and attachments be placed on the top rack. Ensure that the attachments are removed from the cups before placing in the dishwasher.

8 9

5 Wipe the motor base clean with a damp cloth.

Page 6

Use of the Coffee and Spice Grinder

Suggested Uses

WARNING: Never leave the appliance unattended while in use.

CAUTION: Handle the blade assembly of the stainless steel grinding cup with care as the blades are very sharp.

WARNING: Do not process liquid ingredients. The grinder accessory is not intended for liquid processing.

Do not attempt to chop ice.

CAUTION: Check the grinding cup for presence of foreign objects before using.

ASSEMBLY USE REMOVAL

Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5

1 Place the motor base on a clean, dry, level surface such

as a counter or table top. Press down on the motor base to make sure that the suction cups adhere to the counter or table top.

2 Make sure that the motor base is plugged in for use.

3 Add ingredients to the stainless steel grinding cup. Use

the measurement lines on the grinding cup for added convenience!

NOTE: Do not overﬁll! to avoid spilling, do not add

ingredients past the “MA X” ﬁll line.

4 Place the lid onto the blade assembly with stainless

steel grinding cup so that the tabs on the cup meet the entry point on the blade assembly. Twist until the lid is locked in place. ( Fig . 1)

5 Place the grinder onto the motor base, aligning the tabs

on the grinder with the motor base. Turn it clockwise, until you feel it click into place. (Fig. 2)

6 Press down on the top of the grinder in short inter vals

until you reach your desired consistency. (Fig. 3)

7 To remove the grinder, ensure that the motor has

stopped running. Do not remove cover until blade has completely stopped. Then turn the grinder anticlockwise (Fig. 4) and pull straight up to remove.

(Fig. 5)

8 Remove the blade assembly with stainless steel

grinding cup by twisting the lid anticlockwise. Be sure to store the grinder with the lid attached.

9 Make sure that the motor base is unplugged when not

in use.

10 To remove the motor base unit, tip the unit forward

from the rear to easily disengage the suction cups.

PURPOSE / FUNCTION SUGGESTED CUP TYPE OF FOOD

300 ml Nutri Ninja® cup

Chopping / Pulsing

500 ml Nutri Ninja cup 650 ml Nutri Ninja cup

650 ml Stainless Steal Ninja

cup

300 ml Nutri Ninja cup

Mixing

500 ml Nutri Ninja cup 650 ml Nutri Ninja cup 900 ml Nutri Ninja cup

300 ml Nutri Ninja cup

Sauces

500 ml Nutri Ninja cup 650 ml Nutri Ninja cup 900 ml Nutri Ninja cup

300 ml Nutri Ninja cup

Frozen Blending

500 ml Nutri Ninja cup 650 ml Nutri Ninja cup

650 ml Stainless Steal Ninja cup

300 ml Nutri Ninja cup

Nutrient Juices/Smoothies

500 ml Nutri Ninja cup 650 ml Nutri Ninja cup 900 ml Nutri Ninja cup

Grinding Coffee and Spice Ninja Grinder

FILLING YOUR NUTRI NINJA

Want to create smooth and delicious drinks using your Nutri Ninja cups? Simply add ingredients to the container in the order they appear in each recipe, or follow the guideline below when creating your own customized recipes. (Fig. 1)

ice,

frozen ingredients

powders,

nut butters

liquids, yogurt

leafy greens,

herbs

fresh fruits,

veggies

Fig. 1

Salsa

Leafy Herbs

Batters

Dips

Vinaigrettes

Salad Dressings

Simple Sauces

Ice

Frozen Fruit

Ice Cream

Fruits

Vegetables

Leafy Greens

Coffee Beans

Spices

10 11

Page 7

Care & Maintenance Troubleshooting Guide

HOW TO CLEAN

CAUTION: Make sure that the motor base is

unplugged from the power source before inserting or removing any attachment and before cleaning.

CAUTION: DO NOT immerse the motor base into

water or any other liquid.

CAUTION: Use caution when handling the blade

assemblies as the blades are very sharp.

1 Separate/remove all parts from each other.

2 Clean the motor base with a damp cloth and wipe dry.

3 Place cups in the dishwasher. Place the lids, and

attachments on the top rack.

4 Carefully hand wash the lids, Nutri Ninja

assemblies in warm, soapy water with a soft cloth.

If the appliance needs servicing, please call customer

service at 1-877-646-5288.

cups, and blade

HOW TO STORE

1 Store the Nutri Ninja Pro Blender upright. Secure the

power cord underneath the base by wrapping the cord around the cord wrap. Do not place anything on top. Store the cups and the rest of the attachments along side the appliance where they will not be damaged and won’t cause a hazard.

RESETTING THE MOTOR THERMOSTAT

The Nutri Ninja Pro Blender features a unique safety

system which prevents damage to the unit’s motor and drive system should you inadvertently overload your appliance. If the appliance is being overloaded, the motor will stop. To reset the appliance, follow the resetting procedure below:

1 Unplug the appliance from the electrical outlet.

2 Remove and empty the cup and ensure that no food is

jamming the cutting blades.

3 Allow the appliance to cool for approximately 30 minutes.

4 Re-install the cup onto the base and re-plug the

appliance into the electrical outlet.

5 Proceed to use the appliance as before while making sure

not to exceed the recommended maximum capacities.

PROBLEMS POSSIBLE REASONS & SOLUTIONS

Motor doesn’t start or attachment doesn’t rotate.

Food is unevenly chopped.

Food is too ﬁnely chopped or too watery.

You cannot achieve snow from ice cubes.

Cup is leaking.

Unit doesn’t turn on.

Unit doesn’t turn off.

• For the cups, make sure that the tabs are seated in the slots and

turned clockwise.

• Either you are chopping too much food at once, or you are not pulsing

properly. Reduce the amount of food in the cup.

• The food has been over processed. Use short pulses for best results.

Press down on the cup in short intervals.

• For best results use ice straight from the freezer. Try using short pulses

instead of one long one.

• Make sure the cup is completely dry before adding ice.

• Make sure that your lid or blade assembly is properly assembled to the

cup. Leaking may occur if it is misaligned when twisted onto the cup. Turn the lid tightly clockwise.

• Make sure the unit is plugged in.

• Rotate and press down on the cup to turn the unit on.

• Make sure the blade assembly is properly assembled to the cup and that

it is not misaligned.

• Unplug the power cord from the electrical outlet and call customer

service for support.

• Pulse ingredients for best results. Press down on the cup in short

Doesn’t mix well.

intervals for even blending and chopping. For frozen ingredients, pulse in short intervals of 2-5 seconds and repeat.

• Set the cup on a level surface. Place the lid or blade assembly on top of

Lid/blade assembly will not properly align to the cup.

the cup and align the threads so that the lid/blades sit ﬂat on the cup. Twist clockwise so that the lid/blades evenly align to the cup until you have a tight seal.

Replacement Parts

ORDERING REPLACEMENT PARTS

12 13

Page 8

**THIS WARRANTY IS FOR ALL COUNTRIES EXCEPT GERMANY**

**THIS WARRANTY IS FOR GERMANY ONLY**

ONE (1) YEAR LIMITED WARRANTY

EURO-PRO Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1) year

from the date of purchase when utilised for normal household use, subject to the following conditions, exclusions and exceptions.

The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option.

This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or

used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling

or damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused

by or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been

performed by a repair person not authorised by EURO-PRO Operating LLC.

If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the

complete appliance and accessories, freight prepaid. For assistance with warranty service options or customer support, please

If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC will repair or replace it free of

charge. Proof of purchase is required and a fee of $19.95 will apply to cover the cost of return freight. *

This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional

warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the speciﬁc obligations expressly assumed

by it under the terms of this Limited Warranty. In no event is EURO-PRO Operating LLC liable for incidental or consequential

damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or

consequential damages, so the above may not apply to you.

This Limited Warranty gives you speciﬁc legal rights, and you may also have other rights which vary from state to state or from

province to province.

TWO (2) YEAR LIMITED WARRANTY

EURO-PRO Operating LLC warrants this product to be free from material defects and workmanship for a period of two (2) years

from the date of purchase when utilised for normal household use, subject to the following conditions, exclusions and exceptions.

The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option.

This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or

used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling

or damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused

by or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been

performed by a repair person not authorized by EURO-PRO Operating LLC.