Pulse™
BL205
OWNER’S GUIDE
®
Euro-Pro Operating LLC
US: Newton, MA 02459
CAN: Ville St-Laurent, QC H4S 1A7
1-877-646-5288
www.ninjakitchen.com
Copyright © 2011 Euro-Pro Operating LLC
Printed in China
Illustrations may differ from actual product.
HELP
®
LINE
BL205.E.110812.1
1 877 646-5288
www.ninjakitchen.com
BL205_30_IB_ENG_110812_1.indd 1-1 11-08-12 1:51 PM
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL
APPLIANCES, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS
BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS
BEFORE USING YOUR NINJA®
KITCHEN SYSTEM PULSE™.
POLARIZED PLUG
WARNING: To reduce the risk of
electric shock, this appliance has a
polarized plug (one blade is wider
than the other). This plug will fit into
a polarized outlet only one way. If
the plug does not fit fully into the
outlet, reverse the plug. If it still
does not fit, contact a qualified
electrician to install the proper
outlet. DO NOT modify the plug in
any way.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR INJURY:
1. To protect against electrical shock,
do not submerge the appliance or
allow the power cord to come into
contact with water or any other
liquid.
2. DO NOT allow young children to
operate the appliance or use as a
toy. Close supervision is necessary
when any appliance is used by or
near children.
3. Never leave an appliance
unattended when in use.
4. Remove the power cord from the
electrical outlet when not in use,
before assembling or disassembling
parts and before cleaning. To
unplug, grasp the plug and pull from
the electrical outlet. Never pull from
the power cord.
5. DO NOT abuse the power cord.
Never carry the appliance by the
power cord or yank it to disconnect
from electrical outlet; instead grasp
the plug and pull to disconnect.
6. DO NOT operate any appliance with
a damaged cord or plug, or after the
appliance malfunctions, has been
dropped or damaged in any manner.
Return the appliance to EURO-PRO
Operating LLC for examination,
repair or adjustment.
7. DO NOT let the power cord hang
over the edge of table or counter or
touch hot surfaces such as the stove.
8. Always use appliance on a dry, level
surface.
9. Keep hands, hair, clothing, as well
as utensils out of container while
processing to reduce the risk of
severe injury to persons or damage
to the appliance. A scraper may be
used but only when the appliance is
not running.
10. CAUTION: Blade assembly is sharp,
handle with care. When handling
the blade assembly, always hold by
the shaft or collar.
11. Avoid contact with moving parts.
12. DO NOT attempt to sharpen
blades.
13. DO NOT use the appliance if blade
assembly is bent or damaged.
14. To reduce risk of injury, never
place the blade assembly on the
base without the pitcher or bowl
properly attached.
15. DO NOT operate this appliance
on or near any hot surfaces (such
as gas or electric burner or in a
heated oven).
16. The use of attachments or
accessories including canning
jars, not recommended by the
manufacturer may result in fire,
electric shock or personal injury.
17. DO NOT remove the container from
the motor base while the appliance
is in operation.
18. To reduce the risk of injury, NEVER
operate the appliance without
the lid in place; DO NOT try to
defeat the interlock mechanism;
make sure that the attachment is
properly installed before operating
the appliance.
19. DO NOT expose containers to
extreme temperature changes.
20. DO NOT blend hot liquids.
21. DO NOT overfill.
22. DO NOT operate the appliance
empty.
23. CAUTION: When mixing pizza
dough or any heavy mix such as
bread dough or pastry dough,
mix for up to 1 minute, then let the
appliance rest for approximately
1 minute before mixing again
to prevent overheating of the
appliance.
24. If the appliance overheats, a
thermal switch will become
activated and shut off the motor.
To reset, unplug the appliance and
let it cool down for approximately
30 minutes before using again.
25. THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not
use this appliance for anything
other than its intended use. Do not
use outdoors.
26. The maximum rating is based on
the Cookie Paddle (40 oz. bowl)
that drives the greatest power and
other recommended attachments
may draw less power or current.
27. Keep the pour spout closed when
blending to prevent splashing.
WARNING: Extension cords are
not recommended for use with this
product.
SAVE THESE
INSTRUCTIONS
2
BL205_30_IB_ENG_110812_1.indd 2-3 11-08-12 1:51 PM
TOL L FR EE : 1 -8 77- 64 6- 528 8
ww w.n injak itc he n.c om
3
Contents
Thank you for
purchasing
®
the Ninja
Kitchen
System
Pulse™.
Getting to Know Your Ninja® Kitchen System Pulse™ .........6
Assembling the Ninja
Assembly and Use for the Single Serve Cup ............................ 9
Assembly and Use for the 40-oz Bowl ... ................................... 10
Suggested Uses ................................................................................... 11
Care & Maintenance ...........................................................................12
Troubleshooting Guide ..................................................................... 13
Replacement Parts .............................................................................13
Recipes .................................................................................................... 14
Warranty & Registration ................................................................... 19
®
Kitchen System Pulse™ ..................... 8
THIS BOOK COVERS MODEL NUMBERS:
BL205 30
TECHNICAL SPECIFICATIONS
Voltage: 120V., 60Hz.
Power: 700 Watts
Bowl Capacity: 40 ounces (5 cups)
Single Serving Cup Capacity: 16 ounces. (2 cups)
4
BL205_30_IB_ENG_110812_1.indd 4-5 11-08-12 1:51 PM
TOL L FR EE : 1 -8 77- 64 6- 528 8
ww w.n injak itc he n.c om
5
Getting To Know Your Ninja® Kitchen System Pulse
a
b
c
d
e
f
g
h
i
™
The Ninja® Kitchen System Pulse™ is a high powered innovative tool with a compact
design and outstanding performance. It is perfect for ice crushing, chopping, blending,
kneading and complete juicing. The Ninja
®
Kitchen System Pulse™ also features a unique
capability to knead dough for cookies, breads, pizza and more! Blend and go with the
convenient single serve cup, create delicious drinks to get you out the door! Best results
are achieved when you Pulse.
j
FEATURES:
k
a 40 -oz. Bowl Storage Lid
b 40-oz. Bowl Lid with Locking Handle
c To-Go Single Serve Lids (x4)
d Cookie Paddle (40-oz. bowl)
e Dough Blade (40-oz. bowl)
f 4-Blade Assembly (40-oz. bowl)
NOTE: Attachments are not
l
g Single Serve Drink Cup (x4)
h 40-oz. Bowl
i Drive Gear
j Single Serve Blade
k Motor Base
l Power Cord (not shown)
m Recipe book (not shown)
• Ninja
• 40 oz. Bowl and Single Serve Drink Cup - BPA Free
• Cord storage
• Pulse Power: Controlled blending, processing, juicing, and kneading by using short
• Single Serve Blending: Fill, blend, and go! Blend right in the single serve drink cup and
• Dough Mixing: Mix and knead pizza dough, cookie dough, bread dough and more!
interchangeable.
6
BL205_30_IB_ENG_110812_1.indd 6-7 11-08-12 1:51 PM
TOL L FR EE : 1 -8 77- 64 6- 528 8
®
Blade Technology
pulses. In short intervals, press down on the top of the single serve drink cup or the
handle of the 40-oz. bowl lid and pulse to the perfect consistency.
twist on the to-go lid for a healthy, convenient snack with little clean up.
For best results, be sure to carefully read all the instructions contained in the manual
before using this appliance.
ww w.n injak itc he n.c om
7
Assembling the Ninja® Kitchen System Pulse™
Assembly and Use for the Single Serve Cup
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN
USING THE APPLIANCE:
IMPORTANT: Always place the
attachment in the 40-oz. bowl
before adding any ingredients.
IMPORTANT: Attachments are not
interchangeable.
CAUTION: Blades are sharp! Use
extreme caution when handling
the blade assemblies. Always hold
them by the shaft.
IMPORTANT: When mixing dough.
Mix dough for up to 1 minute, then
let appliance rest for 1 minute
before mixing again.
IMPORTANT: Never run the
appliance empty.
CAUTION: Never attempt to remove
the container while the appliance is
still running.
WARNING: Never leave the
appliance unattended while in use.
BEFORE FIRST USE
1 Remove all packaging material and labels
from the appliance.
2 Wash the lids, bowl, single serve cups
and attachments in warm, soapy water
with a soft cloth. Use caution when
washing the blade assemblies as the
blades are very sharp.
3 Rinse and dry thoroughly.
4 The bowl, single serve cups, lids and
attachments are all dishwasher safe.
It is recommended that the lids and
attachments be placed on the top rack.
Ensure that the attachments are removed
from the containers before placing in the
dishwasher.
5 Wipe the motor base clean with a damp
cloth.
ASSEMBLY PULSE REMOVAL
Fig. 1
IMPORTANT: Make sure that the motor
base is plugged in for use.
1 Place the motor base on a clean, dry,
level surface such as a counter or table
top.
2 Add ingredients to the single serve cup.
3 Place the single serve blade onto the cup
and screw it tightly until you have a good
seal. (Fig. 1)
4 Turn the single serve cup upside down
and place it onto the motor base, aligning
the tabs on the cup with the motor base.
Turn to the left, the unit is ready for use.
(Fig. 2)
5 Press down on the top of the cup in short
intervals to activate. (Fig. 3)
Fig. 2
For best results, use short “PULSES”... Practice makes perfect!!
Fig. 3
6 When you have reached your desired
consistency, stop the appliance by
removing your hand from the single
serve cup. Then turn the single serve cup
to the right (Fig. 4) and pull straight up
to remove. (Fig. 5)
NOTE: Do not overfill! To avoid spilling,
do not add ingredients past the “Max” fill
line.
7 Turn the cup upright and remove the
single serve blade by twisting the blade
assembly to the left.
8 Place the To-Go drinking lid onto the
single serve drink cup, twist to seal and
enjoy!
9 Make sure that the motor base is
unplugged when not in use.
Fig. 4
Fig. 5
8
BL205_30_IB_ENG_110812_1.indd 8-9 11-08-12 1:51 PM
TOL L FR EE : 1 -8 77- 64 6- 528 8
ww w.n injak itc he n.c om
9
Assembly and Use for the 40-oz. Bowl
Suggested Uses
ASSEMBLY PULSE REMOVAL
Shaft
Or
Fig. 1
IMPORTANT: Make sure that the motor
base is plugged in for use.
1 Place the motor base on a clean, dry,
level surface such as a counter or table
top.
2 Align and lower the bowl onto the motor
base. (Fig. 1) Handle should be aligned
slightly to the left of the “LOCK” symbol
on the motor base.
3 Rotate the container to the lef t as far as
it will go to lock in place. (Fig. 1)
4 Holding the desired attachment by the
shaft, place it onto the drive gear inside
the container. Ensure that the attachment
is seated properly and is standing
upright. (Fig. 2)
NOTE: The blade will fit loosely on the
drive gear.
5 Add the ingredients to the bowl, making
sure that they do not exceed the highest
measured marking line on the side of the
bowl.
6 Holding the lid by the handle in the
upright position, place it on top of the
Fig. 2
It’s best to add the liquid ingredients first and then the dry ingredients.
Fig. 3
Fig. 4
Fig. 5
bowl aligning the arrow ( ) located on
the lid with the arrow (
bowl’s handle. (Fig. 3)
7 Push down on the “PULSE” on the handle
to start the appliance. (Fig. 4)
NOTE: Pulse ingredients for even
chopping by pressing down in short
intervals.
IMPORTANT: When using the dough
blade or cookie paddle hold the
appliance to secure the appliance to the
counter or table top.
8 When you have reached your desired
consistency, stop pressing the lid handle
and wait for the attachment to stop
turning.
9 To remove the lid, pull the lid handle up
to a 90° angle. Turn the bowl clockwise
to lift off the base. (Fig. 5, Fig. 6)
CAUTION : Never insert your hands in the
pitcher as the blades are sharp. Always
use a spatula to dislodge food that has
stuck to the sides of the pitcher.
10 Make sure that the unit is unplugged
when not in use.
Fig. 6
) located on the
FUNCTION CONTAINER ATTACHMENT TYPE OF FOOD
Mincing
Kneading* 40-oz. Bowl Dough Blade
Dough Mixing* 40-oz. Bowl Cookie Paddle
Blending
Grating
Chopping 40-oz. Bowl Blade Assembly
Ice Crushing
Complete
Juicing
*IMPORTANT: When mixing pizza dough or any heavy mix
Single Serve
40-oz. Bowl
Single Serve
40-oz. Bowl
Single Serve
40-oz. Bowl
Single Serve
40-oz. Bowl
Single Serve
40-oz. Bowl
Blade Assembly
Blade Assembly
Blade Assembly
Blade Assembly
Blade Assembly Fruit & Vegetable Drinks
Onion
Garlic
Herbs
Bread Dough
Pizza Dough
Cookie Dough
Dessert Bars
Biscuits
Scones
Batters
Smoothies
Milkshakes
Frozen Drinks
Dips
Spreads
Cheese
Bread Crumbs
Salsa
Vegetables
Egg Salad
Ice
Slushies
Snow Cones
such as bread dough or pastry dough, mix for up to 1 minute,
then let the appliance rest for approximately 1 minute before
mixing again to prevent overheating of the appliance
.
10
BL205_30_IB_ENG_110812_1.indd 10-11 11-08-12 1:51 PM
TOL L FR EE : 1 -8 77- 64 6- 528 8
ww w.n injak itc he n.c om
11
Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor
base is unplugged from the power
source before inserting or removing any
attachment and before cleaning.
CAUTION: DO NOT immerse the motor
base into water or any other liquid.
1 Separate/remove all parts from each
other.
2 Clean the motor base and gear shaft with
a damp cloth and wipe dry.
3 Place the bowl and single serve cups
in the dishwasher. Place the lids and
attachments on the top rack. Use caution
when handling the blade assemblies as
the blades are very sharp.
NOTE: You may also wash the containers
by filling ¾ of the container with warm
water and a drop of dish washing
detergent, placing the corresponding
lid on the container and pulsing a few
times. Once clean, remove the container
from the motor base. Rinse the container,
attachment and lid under running water.
Allow all the parts to dry before storing.
Please call customer service if any
servicing needs to be performed on the
appliance at 1-877-646-5288.
HOW TO STORE
1 Store the Ninja
upright with the 40-oz bowl on the
motor base, 4-Blade assembly inside and
lid on the bowl. Secure the power cord
underneath the base by wrapping the
cord around the cord wrap. Do not place
anything on top. Store the single serve
cups and the rest of the attachments
along side the appliance where they
will not be damaged and won’t cause a
hazard.
RESETTING THE MOTOR THERMOSTAT
The Ninja
a unique safety system which prevents
damage to the unit’s motor and drive
system should you inadvertently overload
your appliance. If the appliance is being
overloaded, the motor will stop. To reset the
appliance, follow the resetting procedure
below:
1 Unplug the appliance from the electrical
2 Remove and empty the container and
3 Allow the appliance to cool for
4 Re-install the container onto the base
5 Proceed to use the appliance as
®
Kitchen System Pulse™ features
outlet.
ensure that no food is jamming the
cutting blades or attachments.
approximately 30 minutes.
and re-plug the appliance into the
electrical outlet.
before making sure not to exceed the
recommended maximum capacities.
®
Kitchen System Pulse™.
Troubleshooting Guide
PROBLEMS POSSIBLE REASONS & SOLUTIONS
• Make sure the container is securely aligned and locked,
(40-oz bowl) on the motor base.
• For the single serve cup, make sure that the tabs are
seated in the slots and turned to the left.
• Make sure the lid is securely on the container
Motor Doesn’t Start or
Attachment Doesn’t
Rotate.
Food is Unevenly
Chopped.
Food is Too Finely
Chopped or Too Watery.
You Cannot Achieve
Snow From Ice Cubes.
Single serve cup is
leaking.
Unit doesn’t turn on.
Unit doesn’t turn off.
Doesn’t mix well.
(40-oz bowl) in the correct position with the arrows
aligned.
• Check that the plug is securely inserted into the
electrical outlet.
• Check the fuse or circuit breaker in your electrical box.
• The unit could be overloaded. Unplug and wait
approximately 30 minutes before using again.
• The unit could be overheated. Unplug the unit and wait 30
minutes to reset.
• Either you are chopping too much food at once, or you
are not pulsing properly. Remove some of the food
items.
• The food has been over processed. Pulse ingredients
for best results. Press down on the single serve cup or
40-oz. lid handle in short intervals.
• For best results use ice straight from the freezer. Try
using short pulses instead of one long one.
• Make sure that the single serve blade set is tightly
screwed on to the cup before blending. Turn the lid
tightly clockwise.
• Make sure the unit is plugged in.
• Rotate and press down on the single serve cup or the
“pulse” handle on the 40-oz. lid to turn the unit on.
• Release your hand from the single serve cup or the
“pulse” handle on the 40-oz. lid to turn the unit off.
• Pulse ingredients for best results. Press down on the
cup in short intervals for even blending and chopping.
For frozen ingredients, pulse in short intervals of 2-5
seconds and repeat.
Replacement Parts
ORDERING REPLACEMENT PARTS
To order additional parts and attachments, please visit our website:
www.ninjakitchen.com or feel free to contact customer service: 1-877-646-5288.
12
BL205_30_IB_ENG_110812_1.indd 12-13 11-08-12 1:51 PM
TOL L FR EE : 1 -8 77- 64 6- 528 8
ww w.n injak itc he n.c om
13
RecipesRecipes
Breakfast Smoothie
Ingredients:
1
/2 Banana
2 Frozen Strawberries
1
/4 Cup Blueberries
1 Cup Orange Juice
3 Ice Cubes
Directions:
Add the ingredients, in the order listed above, into the single serve cup.
Screw on the single serve cup blade lid, screwing the lid on tightly.
Place the single serve cup on to the motor base (see assembly instructions).
Push down on the top of the single serve cup to begin blending. Run until smooth.
Serve immediately. Serves 1.
Single Serve Cup
Quick Orangsicle
Ingredients:
Blender Jar
1/2 Cup Fresh Orange Juice
1
/2 Cup Fresh Red Grapefruit, Peeled, Segmented
1 Cup Fresh Orange, Peeled, Segmented
1 Cup Low Fat Plain Yogurt
1 tsp. Powdered Sugar
10 To 12 Ice Cubes
Single Serve
1 Cup Vanilla Frozen Yogurt
1
/4 Cup Orange Juice
1
/2 Cup Fresh Orange, Peeled, Segmented
Directions:
Place all the ingredients in blender jar or single serve cup and Pulse until smooth.
Serve right away - blender serves 4.
40 oz. Bowl
Single Serve cup
Fire Roasted Tomato Salsa with Tortilla Chips
Ingredients:
14.5 oz. Can Fire-Roasted Tomatoes, With Juice
1
/2 Small Red Onion, Peeled, Roughly Cut
4 Cloves Garlic Peeled
1
/2 tsp. Salt
1
/4 tsp. Black Pepper
1
/4 tsp. Ground Cumin
1
/4 Cup Cilantro Leaves
2 tbsp. Fresh Lime Juice
6 oz. Baked Tortilla Chips
Directions:
Place all ingredients in the 40 oz. blender jar and pulse until fairly smooth. Taste
and adjust seasonings, if desired. Serve right away with chips or refrigerate for
up to 2 days. Makes about 1
1
/2 cups.
40 oz. Bowl
Bowl Lid
Smoked Salmon Spread
Ingredients:
8 oz. Low Fat Cream Cheese, At Room Temperature
1
/4 Cup Low Fat Sour Cream
1
/4 Cup Low Fat Greek Yogurt
1 tbsp. Fresh Lemon Juice
2 tsp. Fresh Dill, Plus More For Garnish
2 tsp. Chives (Or Green Onions) Plus More For Garnish
1
/2 tsp. Salt
1
/4 tsp. Freshly Ground Black Pepper
8 oz. Smoked Salmon, Roughly Chopped Thinly Sliced Rye Bread
Rounds
Directions:
Place the cream cheese, sour cream, yogurt, lemon juice, dill, chives, salt, pepper,
and half of the smoked salmon in the 40 oz. blender jar.
Pulse until smooth.
Place the spread in a serving dish and mix in the remaining salmon. Garnish with
dill and chives, if desired. Serve right away with rye bread rounds or chill until
serving. Serves 8.
40 oz. Bowl
Bowl Lid
14
BL205_30_IB_ENG_110812_1.indd 14-15 11-08-12 1:51 PM
TOL L FR EE : 1 -8 77- 64 6- 528 8
ww w.n injak itc he n.c om
15
Recipes - cont’d
Easy Pizza Dough
Ingredients:
1/4 oz. Pkg. Dry Active Yeast
1 tsp. Salt
1 tbsp. Sugar
2
/3 Cup Water, warmed to 110 -115°F
1
/4 Cup Canola Oil (substitute olive oil)
2 Cups All-Purpose Flour
Directions:
Place the yeast, salt, sugar and water in the bowl. Pulse for 10 seconds. Add the oil
and flour and blend until the dough is smooth and no lumps remain. Transfer the
dough to a lightly-oiled bowl and cover. Let rise for about 1 hour.
Add sauce and toppings as preferred and bake at 425°F for 25-30 minutes, or
until the crust is lightly browned and the toppings and cheese are hot.
Makes 1 pizza crust.
40 oz. Bowl
Dough Blade
Bowl Lid
English Toffee Cookies
Ingredients:
1 Cup Butter, softened
1
/2 Cup Dark Brown Sugar, packed
1
/2 Cup Sugar
1 tsp. Vanilla Extract
1 Egg Yolk
2 Cups Cake Flour
Pinch Salt
10 ounces Milk Chocolate Candy Bar, melted
1
/2 Cup Almonds, chopped
Directions:
Place the butter, sugars, vanilla extract and egg yolk in the bowl and pulse/blend
for 5 seconds for initial mixing. Use a spatula to clean the sides of the bowl and
pulse/blend for an additional 5 seconds until smooth and creamy. Add 1/2 cup of
flour and salt, pulse/blend for 15 seconds. Add the remaining flour and pulse for
15 seconds. Clean the sides of the bowl and pulse for an additional 10 seconds
until smooth.
Spoon the cookie dough onto a baking sheet that has been coated with cooking
spray. Allow a 2-inch margin, as the dough will spread. Lightly spread the
chocolate over the dough and sprinkle the nuts over all. Bake at 350°F for 15 to
20 minutes. Cool slightly and cut into small squares. Cool on a wire rack.
40 oz. Bowl
Dough Paddle
Bowl Lid
Notes Or Your Favorite Recipes
16
BL205_30_IB_ENG_110812_1.indd 16-17 11-08-12 1:51 PM
TOL L FR EE : 1 -8 77- 64 6- 528 8
ww w.n injak itc he n.c om
17
Notes Or Your Favorite Recipes
ONE (1) YEAR LIMITED WARRANTY
EURO-PRO Operating LLC warrants this product to be free from material defects and
workmanship for a period of one (1) year from the date of purchase when utilized for normal
household use, subject to the following conditions, exclusions and exceptions.
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement
of the unit at our option. This Limited Warranty does not cover normal wear of parts and does
not apply to any unit that has been tampered with or used for commercial purposes. This Limited
Warranty does not cover damage caused by misuse, abuse, negligent handling or damage due
to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or
defects caused by or resulting from damages from shipping or repairs, service or alteration to
the product or any of its parts, which have been performed by a repair person not authorized by
EURO-PRO Operating LLC.
If your appliance fails to operate properly while in use under normal household conditions within
the Limited Warranty period, you may return the complete appliance and accessories with proof
of purchase and date, freight prepaid. For Customer Service support, call 1-877-646-5288 or visit
our website www.ninjakitchen.com.
If the appliance is found by EURO-PRO Operating LLC to be defective, in EURO-PRO Operating
LLC’s sole discretion, we will repair or replace it free of charge. Proof of purchase date and a check
made payable to EURO-PRO Operating LLC in the amount of $19.95 to cover the cost of return
shipping and handling must be included.*
This Limited Warranty is extended to the original purchaser of the unit and excludes all other
legal, implied and/or conventional warranties. The responsibility of EURO-PRO Operating LLC if
any, is limited to the specific obligations expressly assumed by it under the terms of this Limited
Warranty. In no event is EURO-PRO Operating LLC liable for incidental or consequential damages
to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of
incidental or consequential damages, so the above may not apply to you.
This Limited Warranty gives you specific legal rights, and you may also have other rights which
vary from state to state or from province to province.
*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of
purchase date and to attach tag to item before packing with your name, complete address and
phone number with a note giving purchase information, model number and what you believe
is the problem with the item. We recommend you insure the package (as damage in shipping
is not covered by your Limited Warranty). Mark the outside of your package “ATTENTION
CUSTOMER SERVICE”. We are constantly striving to improve our products, therefore the
specifications contained herein are subject to change without notice.
Product Registration
Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja® product
within ten (10) days of purchase. You will be asked to provide the store name, date of purchase
The registration will enable us to contact you in the unlikely event of a product safety
notification. By registering you acknowledge to have read and understood the instructions for
18
BL205_30_IB_ENG_110812_1.indd 18-19 11-08-12 1:51 PM
TOL L FR EE : 1 -8 77- 64 6- 528 8
and model number along with your name and address.
use, and warnings set forth in the accompanying instructions.
ww w.n injak itc he n.c om
19
Loading...