Ninja BL200UK Owner's Manual

Download

Page 1

Kitchen System Pulse

BL200UK series

OWNER’S GUIDE

Page 2

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS BEFORE USING YOUR NINJA® KITCHEN SYSTEM PULSE®.

IMPORTANT:

This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children shall not use or play with this appliance. Close supervision is necessary to keep appliance out of reach of children during use.

WARNING:

The blades are not afﬁxed to the unit. They are removable and very sharp. Handle with care!

CAUTION: ln order to avoid a

hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

1. To protect against electrical shock, do not submerge the appliance or allow the power cord to come into contact with water or any other liquid.

2. DO NOT allow young children to operate the appliance or use as a toy. Close supervision is necessary when any appliance is used near children.

3. Never leave an appliance unattended when in use.

4. Turn the appliance off and remove the power cord from the electrical outlet when not in use, before assembling or disassembling parts, accessing parts that move while in use and before cleaning. To unplug, grasp the plug and pull from the electrical outlet. Never pull from the power cord.

5. DO NOT abuse the power cord. Never carry the appliance by the power cord or yank it to disconnect from electrical outlet; instead, grasp the plug and pull to disconnect.

6. DO NOT use with damaged cord or plug.

7. DO NOT USE if the appliance is not working, has been dropped, dropped into water, damaged or left outdoors.

8. NO SERVICEABLE PARTS. Incorrect re-assembly or repair can cause a risk of electrical shock or injury to persons when the appliance is used. Contact Customer Service.

9. DO NOT let the power cord hang over the edge of table or counter or touch hot surfaces such as the stove.

10. Always use the appliance on a dry, level surface.

11. Keep hands, hair, clothing, as well as utensils out of container while processing or blending to reduce the risk of severe injury to persons

0800 862 0453

Page 3

or damage to the appliance. A scraper may be used but only when the appliance is not running.

12. CAUTION: The blades are not afﬁxed to the unit. They are removeable and extremely sharp.

When handling the blades or the chopping blades, do not hold the blades but rather always hold by the shaft. Blades are sharp. Handle carefully!

13. Avoid contact with moving parts.

14. DO NOT attempt to sharpen blades.

15. DO NOT use the appliance if either set of blades are bent or damaged.

16. To reduce the risk of injury, never assemble the chopping blade in the bowl without it being properly attached to the motor base.

17. DO NOT operate this appliance on or near any hot surfaces (such as gas or electric burner or in a heated oven).

18. The use of attachments or accessories including canning jars, not recommended by the manufacturer may result in ﬁre, electric shock or personal injury.

19. DO NOT remove any container from the motor base while the appliance is in operation. Always unplug the unit when not in use.

20. To reduce the risk of injury, NEVER operate the appliance without the lid in place; DO NOT try to defeat or bypass the interlock mechanism. When using the removable blades, make sure they are properly installed before operating the appliance.

21. CAUTION: DO NOT BLEND HOT LIQUIDS.

22. Extreme caution must be used when moving an appliance containing hot food, water or other liquids.

23. DO NOT expose containers to extreme temperature changes.

24. CAUTION: DO NOT process hot foods or hot liquids. Allow hot ingredients to cool before processing.

25. DO NOT overﬁll. DO NOT exceed max ﬁll line.

26. DO NOT operate the appliance empty.

27. To reduce the risk of burns, always allow the appliance to cool before taking off parts and before cleaning.

28. Max ON time is 1 minute under 700W load. If the appliance overheats, a thermal switch will become activated and shut off the motor. To reset, unplug the appliance and let it cool down for approximately 30 minutes before using again.

29. In the event that the unit overloads, the control panel lights will ﬂash and the unit will shut down. Unplug the unit and wait 30 minutes to reset.

30. CAUTION: When mixing pizza dough or any heavy mix such as bread or pastry dough, mix for up to 1 minute, then let the appliance rest for approximately 1 minute before mixing again to prevent overheating of the appliance.

31. The maximum rating is based on the Cookie Paddle inserted into the 1L bowl. This drives the greatest power. Other recommended attachments may draw signiﬁcantly less power or current.

32. To avoid injury, never attempt to place the Nutri Ninja base without ﬁrst assembling the blade assembly to the Nutri Ninja

33. THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY. Do not use this appliance for anything other than its intended use. Do not use outdoors.

™

blade assembly onto the motor

™

cup.

WARNING: Extension cords are not

recommended for use with this product.

SAVE THESE INSTRUCTIONS

www.ninjakitchen.eu

Page 4

This appliance complies with the WEEE-Directive 2012/19/EU on the disposal of electrical and electronic equipment (WEEE).

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material sources. To return your used device, please use the return and collection systems or contact the retailer where this product was purchased. They can take this product for environmental safe recycling.

This appliance complies with the European directives for electromagnetic compatibility (EMC) 2004/108/EC and its revisions, as well as Low Voltage Directive (LVD) 2006/95/EC and its revisions.

Guarantee: This product is unconditionally guaranteed for one year against all defects of workmanship and materials. This guarantee does not affect your statutory rights. If this product proves unsatisfactory please contact our customer service department on freephone 0800 862 0453 or by e-mail ukservice@euro-pro.com.

THIS BOOK COVERS MODEL NUMBERS:

BL200UKBK 30 BL200UKCR 30

TECHNICAL SPECIFICATIONS

Voltage: 220-240V~, 50/60Hz. Power: 700 Watts

Bowl Capacity: 1L Single Serving Cup Capacity: 470 ml

Euro-Pro, Ninja, Nutri Ninja and Kitchen System Pulse are trademarks of Euro-Pro Operating LLC.

0800 862 0453

Page 5

Contents

Thank you for purchasing the

Ninja

Kitchen

System Pulse

Getting to Know Your Ninja® Kitchen System Pulse® ...................................................5

Using the Ninja

Before First Use ..................................................................................................7

Assembly and Use for the Nutri Ninja

Assembly and Use for the 1L Bowl .......................................................................9

Suggested Uses ......................................................................................................10

Care & Maintenance ...............................................................................................11

Troubleshooting Guide .............................................................................................12

Kitchen System Pulse® .....................................................................7

™

Cup............................................................8

www.ninjakitchen.eu

Page 6

Getting To Know Your Ninja® Kitchen System Pulse

b c

™

a Nutri Ninja

Cup (x 2)

b Nutri Ninja™ Blade

c Nutri Ninja™ To-Go Lids (x 2)

d 1L Bowl

e Storage Lid

f Lid with Locking Handle

h i

g Cookie Paddle (1L bowl)

h Dough Blade (1L bowl)

i 4-Blade Assembly (1L bowl)

j Motor Base

k Power Cord (not shown)

NOTE: Attachments are not interchangeable.

0800 862 0453

Page 7

The Ninja® Kitchen System Pulse® is a high powered innovative tool with a compact design and outstanding performance. It is perfect for ice crushing, chopping, blending, kneading and complete juicing. The Ninja® Kitchen System Pulse® also features a unique capability to knead dough for cookies, breads, pizza and more! Blend and go with the convenient Nutri Ninja™ cup, create delicious drinks to get you out the door! Best results are achieved when you Pulse.

FEATURES:

• Ninja® Blade Technology

• Bowl and Nutri Ninja

• Cord storage

• Pulse Power: Controlled blending, processing, juicing, and kneading by using short pulses. In short intervals, press

down on the top of the Nutri Ninja

• Nutri Ninja

™

convenient snack with little clean up.

• Dough Mixing: Mix and knead pizza dough, cookie dough, bread dough and more!

™

Cup - BPA Free

™

cup or the handle of the lid and pulse to the perfect consistency.

Blending: Fill, blend, and go! Blend right in the Nutri Ninja™ cup and twist on the to-go lid for a healthy,

www.ninjakitchen.eu

Page 8

Using the Ninja® Kitchen System Pulse

PLEASE KEEP THESE IMPORTANT SAFEGUARDS IN MIND WHEN USING THE APPLIANCE:

CAUTION: DO NOT BLEND HOT LIQUIDS.

IM POR TA NT: Always place the attachment in the

Bowl before adding any ingredients.

IM POR TA NT: At tachments are not

interchangeable.

CAUTION: Blades are sharp! Use extreme caution

when handling the blade assemblies. Always hold them by the shaft.

IM POR TA NT: When mixing dough. Mix dough

for up to 1 minute, then let appliance rest for 1 minute before mixing again.

IM POR TA NT: Never run the appliance empty.

CAUTION: Never attempt to remove the container

while the appliance is still running.

WARNING: Never leave the appliance unattended

while in use.

BEFORE FIRST USE

1 Remove all packaging material and labels from the

appliance.

2 Wash the lids, bowl, Nutri Ninja

in warm, soapy water with a soft cloth. Use caution when washing the blade assemblies as the blades are very sharp.

3 Rinse and dry thoroughly.

4 The bowl, Nutri Ninja

all dishwasher safe. It is recommended that the lids and attachments be placed on the top rack. Ensure that the attachments are removed from the containers before placing in the dishwasher.

5 Wipe the motor base clean with a damp cloth.

0800 862 0453

™

cups and attachments

™

cups, lids and attachments are

Page 9

Assembly and Use for the Nutri Ninja™ Cup

ASSEMBLY PULSE REMOVAL

Fig. 1

Fig. 2

Fig. 3

For best results, use short “PULSES”... Practice makes perfect!!

IM POR TA NT: Make sure that the motor base is

plugged in for use.

1 Place the motor base on a clean, dry, level surface such

as a counter or table top.

2 Add ingredients to the Nutri Ninja

3 Place the Nutri Ninja

™

blade onto the cup and screw it

™

cup.

tightly until you have a good seal. ( Fig. 1)

4 Turn the Nutri Ninja

™

cup upside down and place it onto

the motor base, aligning the tabs on the cup with the motor base. Turn to the lef t, the unit is ready for use.

(Fig. 2)

5 Press down on the top of the cup in short intervals to

activate. (Fig. 3)

Fig. 4

Fig. 5

6 When you have reached your desired consistency, stop

the appliance by removing your hand from the Nutri Ninja™ cup. Then turn the Nutri Ninja™ cup to the right (Fig. 4) and pull straight up to remove. (Fig. 5)

NOTE: Do not overﬁll! To avoid spilling, do not add

ingredients past the “Max” ﬁll line.

7 Turn the cup upright and remove the Nutri Ninja

™

blade

by twisting the blade assembly anti-clockwise.

8 Place the To-Go drinking lid onto the Nutri Ninja

™

cup,

twist to seal and enjoy!

9 Make sure that the motor base is unplugged when not in

use.

www.ninjakitchen.eu

Page 10

Assembly and Use for the 1L Bowl

ASSEMBLY PULSE REMOVAL

Shaft

Fig. 6

IM POR TA NT: Make sure that the motor base is plugged

in for use.

1 Place the motor base on a clean, dr y, level surface such

as a counter or table top.

2 Align and lower the bowl onto the motor base.

(Fig. 6) Handle should be aligned slightly to the left of the “LOCK” symbol on the motor base.

3 Rotate the container to the left as far as it will go to lock

in place. (Fig. 6)

4 Holding the desired attachment by the shaft, place it

onto the drive gear inside the container. Ensure that the attachment is seated properly and is standing upright.

(Fig. 7)

NOTE: The blade will ﬁt loosely on the drive gear.

5 Add the ingredients to the bowl, making sure that they

do not exceed the highest measured marking line on the side of the bowl.

6 Holding the lid by the handle in the upright position,

place it on top of the bowl aligning the arrow ( on the lid with the arrow ( ) located on the bowl’s handle. (Fig. 8)

Fig. 7

It’s best to add the liquid ingredients ﬁrst and then the dry ingredients.

Fig. 8

Fig. 9

) located

Fig. 10

7 Push down on the “PULSE” on the handle to start the

appliance. (Fig. 9)

NOTE: Pulse ingredients for even chopping by pressing

down in short intervals.

IM POR TA NT: When using the dough blade or cookie

paddle hold the appliance to secure the appliance to the counter or table top.

8 When you have reached your desired consistency, stop

pressing the lid handle and wait for the attachment to stopturning.

9 To remove the lid, pull the lid handle up to a 90° angle.

Turn the bowl anti-clockwise to lift off the base.

(Fig. 10, Fig. 11)

CAUTION: Never inser t your hands in the bowl as the

blades are sharp. Always use a spatula to dislodge food that has stuck to the sides of the bowl.

10 Make sure that the unit is unplugged when not in use.

Fi g. 11

0800 862 0453

Page 11

Suggested Uses

FUNCTION CONTAINER ATTACHMENT TYPE OF FOOD

Mincing

Nutri Ninja™ Cup

1 L Bowl

Blade Assembly

Kneading* 1L Bowl Dough Blade

Dough Mixing* 1L Bowl Cookie Paddle

Blending

Nutri Ninja

1L Bowl

™

Cup

Blade Assembly

Chopping** 1L Bowl Blade Assembly

™

Ice Crushing

Complete Juicing

Nutri Ninja

1L Bowl

™

Cup

Blade Assembly

Blade Assembly Fruit & Vegetable Drinks

Onion Garlic Herbs

Bread Dough

Pizza Dough

Cookie Dough

Dessert Bars

Biscuits

Scones Batters

Smoothies

Milkshakes

Frozen Drinks

Dips

Spreads

Salsa

Vegetables

Egg Salad

Ice

Slushies

Snow Cones

* I MPO RTA NT: When mixing pizza dough or any heavy mix such as bread dough or pastry dough, mix for up to 1

minute, then let the appliance rest for approximately 1 minute before mixing again to prevent overheating of the appliance.

* * IMP O RTANT: When chopping, operate the appliance for 15 seconds and let it rest for 1 minute before choppng again.

www.ninjakitchen.eu

Page 12

Care & Maintenance

HOW TO CLEAN

CAUTION: Make sure that the motor base is unplugged

from the power source before inserting or removing any attachment and before cleaning.

CAUTION: DO NOT immerse the motor base into water

or any other liquid.

1 Separate/remove all parts from each other.

2 Clean the motor base and gear shaft with a damp cloth

and wipe dry.

3 Place the bowl and Nutri Ninja

Place the lids and attachments on the top rack. Use caution when handling the blade assemblies as the blades are very sharp.

NOTE: You may also wash the containers by ﬁlling the

container with no more than 700 ml of warm water and a drop of dish washing detergent, placing the corresponding lid on the container and pulsing a few times. Do not ﬁll the container with more than 700 ml of water because it will overﬂow. Once clean, remove the container from the motor base. Rinse the container, attachment and lid under running water. Allow all the parts to dry before storing.

™

cups in the dishwasher.

HOW TO STORE

1 Store the Ninja® Kitchen System Pulse® upright with

the 1L bowl on the motor base, 4-Blade assembly inside and lid on the bowl. Secure the power cord underneath the base by wrapping the cord around the cord wrap. Do not place anything on top. Store the Nutri Ninja™ cups and the rest of the attachments along side the appliance where they will not be damaged and won’t cause a hazard.

RESETTING THE MOTOR THERMOSTAT

The Ninja® Kitchen System Pulse® features a unique safety system which prevents damage to the unit’s motor and drive system should you inadvertently overload your appliance. If the appliance is being overloaded, the motor will stop. To reset the appliance, follow the resetting procedure below:

1 Unplug the appliance from the electrical outlet.

2 Remove and empty the container and ensure that no

food is jamming the cutting blades or attachments.

3 Allow the appliance to cool for approximately 30

minutes.

4 Re-install the container onto the base and re-plug the

appliance into the electrical outlet.

5 Proceed to use the appliance as before making sure not

to exceed the recommended maximum capacities.

0800 862 0453

Page 13

Troubleshooting Guide

PROBLEMS POSSIBLE REASONS & SOLUTIONS

Motor doesn’t start or attachment doesn’t rotate.

• Make sure the container is securely aligned and locked, (bowl or pticher)

on the motor base.

• For the Nutri Ninja

and turned to the left.

™

cup, make sure that the tabs are seated in the slots

• Make sure the lid is securely on the bowl in the correct position with the

arrows aligned.

• Check that the plug is securely inserted into the electrical outlet.

• Check the fuse or circuit breaker in your electrical box.

• The unit could be overloaded. Unplug and wait approximately 30

minutes before using again.

• The unit could be overheated. Unplug the unit and wait 30 minutes to

reset.

Food is unevenly chopped.

Food is too ﬁnely chopped or too watery.

You cannot achieve snow from ice cubes.

Nutri Ninja™ cup is leaking.

Unit doesn’t turn on.

Unit doesn’t turn off.

Doesn’t mix well.

• Either you are chopping too much food at once, or you are not pulsing

properly. Remove some of the food items.

• The food has been over processed. Pulse ingredients for best results.

Press down on the Nutri Ninja™ cup or lid handle in short intervals.

• For best results use ice straight from the freezer. Try using short pulses

instead of one long one.

• Make sure that the Nutri Ninja

cup before blending. Turn the lid tightly clockwise.

™

blade set is tightly screwed on to the

• Make sure the unit is plugged in.

• Rotate and press down on the Nutri Ninja

the lid to turn the unit on.

• Release your hand from the Nutri Ninja

the lid to turn the unit off.

™

cup or the “pulse” handle on

™

cup or the “pulse” handle on

• Pulse ingredients for best results. Press down on the cup in short

intervals for even blending and chopping. For frozen ingredients, pulse in short intervals of 2-5 seconds and repeat.

www.ninjakitchen.eu

Page 14

Notes

0800 862 0453

Page 15

Notes

www.ninjakitchen.eu

Page 16

Euro-Pro Europe Limited 15 Mariner Court Calder Park Wakeﬁeld WF4 3FL

Freephone 0800 862 0453

www.ninjakitchen.eu

Euro-Pro, Ninja, Nutri Ninja and Kitchen System Pulse are trademarks of Euro-Pro Operating LLC.

Printed in China

Illustrations may differ from actual product.

BL200UKseries_30_IB_ENG_141030_4