Ningbo Lumiaudio Electronic Technology WSR User Manual

USER MANUAL

WiFi Streaming Receiver

WiFi Streaming Receiver

3.5mm audio cable

USB cable

AL
USER
MANU

user manual

Packing List

3.5mm In

3.5mm Out

Indicato r li gh t

WPS butt on

RJ45

Micro- US B

Interface

:

Input 3.5mm connector to give a wired
audio source from other devices like
phone and PC.

Info The wired input’s priority is lower

:

than WiFi audio input.

Output 3.5mm output connector
connects to other devices like active
speakers and amplifiers.

Micro USB upply power with a 5V/1A
power adaptor which phone use.

:

: S

WPS/Reset: Press to activate WPS,long
press to operate Reset.

Indicator Light

Red flash: The device is starting

Steady red Sucessfully started, but

:

not connect with the Internet

Green flash: In the process of
connecting with the Internet

Steady green Connected with the

:

Internet

Steady orange Line-in mode:

Alternating red/green: In the
process of updating or resetting

Supported Software

Airplay,iTunes,

iOS

Android

Search "Smart Sonix" in GooglePlay
or Apple Store to download the APP
controller.

Smartsonix APP, other
App comply to DLNA
like Spotif y,BubbleUpnp

Smartsonix APP, other
App comply to DLNA like
Spotify,BubbleUpnp

POWER

AMP

ACTIVE S PE AK ER

How to Play

WiFi Streaming Receiver is a device that
receives Internet streaming music or other
wireless music, and multiple receivers can
be combined to a Zone to play same music
synchronously.

1

Find a USB battery charger which
usually your phone have one, the power
can be 5V/1A or above, connect the
battery charger, USB cable and receiver
to power on.

2

Connect a smart phone to a WiFi.

3

Conect the receiver to the same WiFi
which the smart phone connected.
Download smartsonix APP, and the APP
will guide you to finish the connection.

4

Play Music
A.iphone Play music on the phone,

open Airplay to choose a receiver, then
the music will send to the receiver.

:

B.Android phone Open a music player with

:
DLNA like BubbleUpnp, choose a receiver
as a render,then the music will send to the
receiver. Also can use smartsonix APP to
play.

5

Zone building Use the Smart Sonix APP

:
to build zones freely,the APP will guide
how to operate the easy operation.

FCC Statement

Any Changes or modifications not expressly approved
by the party responsible for compliance could void
the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment .
This equipment should be installed and operated with minimum
distance 20cm between the radiator& your body.

Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.