Page 1
(26UL/MRF+EMW200TK1) Operation Manual
WIRELESS REMOTE DUAL OUTLET
Before using your remote control on/off set, please read the following instructions carefully
A. Perfect for landscape, holiday and security lighting.
• For both outdoor and indoor use
• operational range: 150’ (35m)
• One 12V, A23 battery included (transmitter).
• Dual grounded outlets – can control two devices
• Easy to install – just plug it in
B. EASY INSTALLATION:
1. One receiver supplied with one transmitter.
2. Plug the receiver into a 3-prong outdoor outlet, then plug the lights or device to be switched
into the receiver. Make sure that there is power to the outlet that the receiver is plugged into.
Let the receiver hang downward so moisture does not accumulate in the outlet.
NOTE: The Canadian Electric Code (and most local codes) require that outdoor outlets be
protected by a Ground Fault Circuit Interrupter (GFCI).
3. The device must be mounted in a vertical position with the receptacle facing downwards and
positioned with a minimum vertical length equal to twice the unit.
4. Red indicator light is lit when the outdoor receiver is “ON”.
Not for permanent installation. Do not install or use this product for more than a 90-day
period per year.
C. OPERATION:
1. Press “ON” on remote to turn receiver ON.
2. Press “OFF” on remote to turn receiver OFF.
ATTENTION: INSTRUCTIONS FOR PROPER USE
• Store indoors when not in use
• Do not immerse into water
Notice:
Functional Range may be adversely affected by one or more of the following factors:
• orientation of the transmitter or receiver;
• weather, radio frequency interference;
• low transmitter battery and obstructions between the transmitter and receiver.
Any misuse, changes or modification to this unit voids the warranty.
Page 2
D. SPECIFICATIONS
120VAC 60Hz 15A Resistive
120VAC 60Hz 1200W Tungsten
Frequency: 433.92MHz
Complies with Part 15 of FCC Rules
WARNING:
Risk of electric shock!
• Keep children away.
• Do not use in wet locations.
• Fully insert plug.
• When used outdoors, plug into GFCI protected outlet.
CAUTION:
Risk of fire!
• Do not exceed electrical ratings.
E. BATTERY REPLACEMENT:
1. Replace with type 23A, 12V battery.
2. Ensure that the battery’s polarity (-/+) is correctly placed according to spring contact.
F. BATTERY DISPOSAL:
Dispose of old battery properly: Batteries must never be thrown into regular household waste as
this seriously damages our environment. Dispose of batteries in a proper way by only throwing
them into designated battery recycling waste bins or ask your local authority how to handle
exhausted batteries properly.
G. Radio Frequency Interference Statement:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that might cause
undesired operation.
Changes or modifications not expressly approved by the manufacturer could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
Page 3
Loading...