NINGBO CSTAR IMP and EXP 0047 User Manual

80mm

55mm

Keychain speaker

Model:SL175

Congratulations on your BT Keychain speaker!
This BT speaker allows you to enjoy your music without wires.

Please read this manual before use.

DEVICE LAYOUT:

1. Power ON/OFF

2. Keychain

3. LED indicator

4. MICRO USB INPUT

CHARGING THE SPEAKER:

A full charge is approximately 1 hour and plays continuously 1.5 hours.
Connect the speaker to the USB charging cable to charge.
When the LED indicator is RED, the speaker is charging.

HOW TO USE:

If you want to pair your mobile device with the speaker, please make sure the

to pair the device. After doing so the speaker will be visible in the Bluetooth
devices overview of your device. Please select “BT Speaker’’ to pair your
mobile device with the speaker.

SPECIFICATIONS:

Model: SL175
Input: DC5V / 0.2A
Battery capacity: 200mAh
Speaker Output: 2W
BT Distance: 10M

IMPORTANT SAFETY INSTRUCTIONS

1. DO NOT DROP, APPLY EXCESSIVE FORCE TO THE CONTROLS, OR PUT
HEAVY OBJECTS ON TOP OF THE BT SPEAKER.

2. DO NOT ATTEMPT TO REPAIR, DISASSEMBLE OR MODIFY THE PRODUCT.
There are no user-serviceable parts inside this unit.

3. Young children under the age of 7 years should be supervised to ensure
they do not play with the product. Close supervision is necessary when any
appliance is used by or near children under the age of 7.

4. If you do not use the speaker for long periods of time, be sure to store it in
a dry place,free from extreme temperature,humidity and dust.

5. Keep speaker away from any heat source.

FCC ID: 2ABHA0047

Made in China D Printed in China D

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference that may
cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note:This equipment has been tested and found to comply with the limits for a class B
digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequence energy and,if not
installed and used in accordance with the instructions,may cause harmful interference to
radio communications.However,there is no guarantee that interference will not accor in a
particular installation.if this equipmemt does cause harmful interference to radio or
television reception,which can be determined by turning the equipment off and on,the user
is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an autlet on a circuit different from that to which the

receiver is connectec.

• Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The devicecan
be used in portable exposure condition without restriction.