Not Placed Correctly
ORBIT
WIRELESS
CHARGER
SW007
USER MANUAL
Product Features
Standard Version: WPC – 1.1
Input Voltage: DC 5V /1500mA
Charging Voltage: 5V, 800mA
Charging Distance: 4-6mm.
Charging Methods: Induction Model
Working Frequency: 110 – 160 KHz
Functions
1. The Orbit Wireless Charger is a high
sensitivity, wireless charging pad for mobile
phones which is compatible with all wireless
charging products in accordance with QI
international standards.
Wireless Charger will automatically enter
standby mode until the next use.
conventional chargers and will produce less
heat.
mobile phone; it can be removed from the
charger without disconnecting the cable.
Charging
1. Connect the Orbit Wireless Charger to a USB
port or USB mains adapter with the cable
provided.
2. Once connected the LED will glow red to
indicate standby mode.
3. To charge a mobile phone, place it directly on
top of the charging pad with the screen side
the phone is cha
Safety
1. Keep credit cards, pacemakers and other
sensitive electronic devices away from the
wireless charger.
2. Do not use the charger if it is wet.
3. Do not use the charger outside the safe
operating temperature range of -20 C to 40 C.
4.Do not use the charger in direct sunlight or high
temperatures.
5. Do not place anything between the mobile
device being charged and the charging pad.
6. This product is not suitable for use as a travel
adapter.
rging.
light
to indicate
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference that may
cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note:This equipment has been tested and found to comply with the limits for a class B
digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequence energy and,if not
installed and used in accordance with the instructions,may cause harmful interference to
radio communications.However,there is no guarantee that interference will not accor in a
particular installation.if this equipmemt does cause harmful interference to radio or
television reception,which can be determined by turning the equipment off and on,the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an autlet on a circuit different from that to which the
receiver is connectec.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
Loading...