220mm
90mm
EL149
User Manual
MODE
TF CARD
MICRO USB PORT
POWER SWITCHMICROPHONE
Controls Description
POWER SWITCH : Push to the left to turn on and right to turn off.
MICROPHONE : For use as a hands-free speaker phone.
TF CARD : MicroSD/TF Card Slot: Insert TF/MicroSD card into
slot to play music.
MICRO USB/AUX : Micro USB Charging Input/AUX
M MODE : Toggle between Bluetooth, Aux-in, and FM Scan
Radio.
PAUSE/PLAY: To pause/play the music or answer/end call.
Press and Release: To play/pause the music in TF Card, AUX,
and Bluetooth mode.
Press once: To search the station
automatically in FM mode.
PREVIOUS: Decrease the volume / previous song /
previous station in FM mode.
Press and Release: For previous song in TF Card, AUX, and
Bluetooth mode / Previous station in FM mode.
Press and hold to decrease the volume.
NEXT: Increase volume / Next song / Next station.
Press and Release: For next song in TF Card, AUX, and
Bluetooth mode / Next station in FM mode.
Press and hold to increase the volume.
Controls NEXT/PREVIOUS, Volume Up/Down, PAUSE/PLAY,
Answer/End Call: You may also use the functions on your smart
phone or music player to control these functions.
MADE IN CHINA
PAUSE\PLAY
REVIOUS
FCC ID:2ABHA0023
Features
• Wireless Speaker
• Hands-free Speaker Phone
• Flashing Lights
• Auxiliary Line-in Play Function
• TF Card Player
• FM Scan Radio
• Micro USB Charging Cable and 3.5mm/ USB AUX Cable
Product Specifications:
NEXT
Speaker output: 3 Watts, 45mm
Wireless Version: V4.2
Operation distance: 33 Feet
Rechargeable lithium Ion battery: 400 mAh, 5V (+/- .5V)
Distortion: < .5%
Signal noise ratio: > 95dB
Frequency: 20hz – 20khz
Approximate Charging Time: 2 hours
Charging
Plug the micro USB end of the charging cable into the Charging
port of the speaker and then connect the USB end of the charging
cable to the USB port of your PC or other USB power source.
The red LED light will light up during charging and turn off after
fully charged. It is strongly recommended that the speaker be
fully charged before first use and after long periods of inactivity.
Wireless Pairing
1. Please check to make sure the device to which you are pairing
has Bluetooth capabilities. This information should be included
in your phone or music player’s instructions or packaging.
2. Make sure that the speaker is turned off.
3. Place the speaker and the smart phone or music player in
proximity so that both devices are in view.
4. Switch the power button risht to turn on. A blue light will flash
and a tone will sound to let you know the device is in pairing
mode. Make sure your Bluetooth device is not already paired.
5. Check your smartphone or music player for the speaker under
the Bluetooth pairing options and select “EL149” for pairing.
A tone will sound when pairing has been achieve
Note: Some mobile phones or other devices may pair
automatically when re-started.
Answer / Reject / End a call
During a call, the ring is heard through the speaker when paired.
1. Press the PAUSE/PLAY button to answer the call.
2. You may also accept or decline a call using your phone’s
functions.
3. To end a call, press the PAUSE/PLAY button during the call.
You may also end the call using your phone’s functions.
Auxiliary Line-In Mode (Plugging in a phone or music player)
Press the MODE button and cycle until the speaker says “Enter
AUX and playing”. Plug the 3.5mm cord into your device’s
headphone jack and the Micro USB plug into the speaker and
play.
Please Note: If NEXT, PREVIOUS, and PAUSE/PLAY functions
are not available in AUX Line-In mode then use your
phone/music player controls.
TF Card Mode
Plug the TF Card into the slot and use the Bluetooth protocols
for the button functions.Support MP3 and WAV audio format only.
FM Scan Radio Mode
Press the MODE button and cycle until
the speaker says “Enter radio and playing”.
Operate the station selections by using the
Bluetooth protocols for the button functions.
Plug-in the USB AUX Cable to receive
Radio reception. Seek next and previous
stations by using the NEXT and PREVIOUS
buttons and control the volume by longer
pressing those same control buttons.
FOR RADIO MODE :
Plug in the USB Aux Cable
to receive Radio reception
Precautions
• Please only use the computer USB or the DC 5V power adapter
matching the Micro USB interface to charge. Only use quality cords and
adapters.
• Please keep and use in normal environments. Exposure to extreme
elements such as extreme heat and cold, fire, excessive moisture, dust,
or other extreme elements may damage the unit. Do not touch with wet
hands.
• Keep debris or other items from blocking the speakers or from entering
any of the ports.
• Do not attempt to open, repair, or take apart the speaker. The speaker
may be damaged during that process.
• If the speaker quality seems lessened, or a slight popping noise is
heard, it may be due to low battery. (Recharge)
• This item is not meant for children.
• Do not overcharge the battery.
TROUBLESHOOTING
No Sound
• Make sure that the music player is working and that the speaker
is charged.
• Make sure the Bluetooth is paired, the AUX cable is plugged in
properly on both ends, or the TF/MicroSD card is inserted properly.
Not charging
• Check to make sure that you are using the correct cable and
that it is fully plugged into both the device and the USB port that
you are charging from. Also check to make sure the PC or other
USB charger is turned on.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including
interference that may cause undesired operation.
Warning:
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction
Loading...